Linking between two Logic Pro machines for recording...

I am working on a film overseas where I need to run two Macs recording live concerts to Logic Pro simulatinously. How do I effectivly sync these two machines in a master/slave set-up? Can I use MMC, or is there a different protocol?

fuzzynormal wrote:
If you're doing post (and of course you would), you can always synch your tracks after the fact.
But the previous response is on target. If you got a lot riding on the recording I'd suggest getting dedicated audio hardware, (rent if you have to) capturing the tracks with confidence, and then importing those tracks to do your post-mix with Logic.
Anyway, how many simultaneous tracks do you need to grab?
FYI, I've recorded my drummer (8-channels) with a old ProTools rig on a ancient G4, and the rest of the band with my Mackie 16 channel rig running into a MacBook Pro with Logic. Synched 'em in post, no problem.
Depending on the length of the recording and the material being recorded, differences in clock can get you subtle but difficult-to-fix phasing issues with that approach.
Probably not an issue when you're recording a drummer through a Mackie, but if this gig is a big one, there may be very different gear and artists involved, and probably a couple sets of extremely expensive ears listening to the final result.

Similar Messages

Change or delete the docflow link between two existing documents

Hi All,
Is there any FM or soulution to change the doc flow link between two documents .
For ex .. i have document A and document B , and created a doc flow link from A to B , Now i have to change the succeeding document to C
I have tried to modify the doc link ,but its not working using crm_order_maintain.I thought of deleting the link between A and B and then create a new link Between A and C , but deletion of link bewteen A and B is also not working.
I have checked with FMs CRM_DOC_FLOW_DELETE_CHECK_EC and CRM_DOC_FLOW_DELETE_EC, followed by CRM_ORDER_SAVE AND COMMIT . i could not find any exception from this FMs , but still the doc link is not deleted.
Pls share if you have any suggestions.
Regards,
Nithish

Hello
I wrote a report to delink items from document flow. I uploaded it [here|http://wiki.sdn.sap.com/wiki/display/CRM/Removelinksfromdocumentflow].
Please, use with caution and always perform careful tests before you run it in a production envinronment.
Hope it helps
Joaquin
Edited by: Joaquin Fornas on Nov 15, 2011 11:49 AM

View Link between two query views

Hi is it possible to create a view link between two views having the where clause bind variables.
How you set the bind variables at the run time for the View objects. It is giving hard time for me to use the Master view in the XmlData bean to generate the Xml document.
I am able to set the Master views bind variables, but for view link destination view
where clause bind variables are not able to set ( link object link condition bind variables are binded run time but the views where chause bind variables of destination view are unable to setand bind)
Thanks
null

Easiest way to do this is to add additional transient attributes to your master view object, and then include those additional transient attributes in the list of source attributes for your view link. This way, you can get BC4J to automatically refer to their values with no additional code on your part.

Linking between two workspaces

Good afternoon all,
I was wondering if there was anyway for me to link between two workspaces on the same schema.
What I currently have set up is two workspaces (1 and 2). I have done a lot of work on 1 and built a Single Sign On application to manage my applications. Workspace 2 was created for a separate team, but I would like some sort of authentication. I was wondering if there was anyway for me to leverage my existing app in Workspace 1 to authenticate for applications in Workspace 2.
My guess is that it's not possible, but I figured I might as well ask around to see if there is some weird hack around it.
Thanks in advance,
Ivan

Alright I'll post it on there. Figured that InDesign users would know more about the links and how to set them up. Thanks for the advice.

Create view link between two view objects (from programmatic data source)

Hi Experts,
Can we create a link between two view objects (they are created from programmatic datasource ; not from either entity or sql query). If yes how to create the link; ( i mean the like attributes?)
I would also like to drag and drop that in my page so that i can see as top master form and the below child table. Assume in my program i will be only have one master object and many child objects.
Any hits or idea pls.
-t

Easiest way to do this is to add additional transient attributes to your master view object, and then include those additional transient attributes in the list of source attributes for your view link. This way, you can get BC4J to automatically refer to their values with no additional code on your part.

Logic Pro how to record bass guitar

Logic Pro how to record bass guitar any tips?

What's up with this is you don't know what you're doing. Obvuoisly if it was the program's fault a few major motion pictures would have never been scored. Garageband was free with the system, it's made for beginners.
You've purchased a professional program, now you're going to have to educate yourself, enjoy!
Oh, you might start with the manual.
http://documentation.apple.com/en/logicpro/
Choose the document "Exploring Logic Pro" Read through it.
And from the main manual-
http://documentation.apple.com/en/logicpro/usermanual/#chapter=10%26section=0
Don't worry, it won't hurt too much.

Link Between two worksheets in Discoverer

Hi...
I'm trying to create a link between two worksheets without success.
What I have is a 'General Ledger' worksheet which lists the journal source for a particular account code that is selected by the user via a parameter. Say the journal source is Accounts Payable invoices, what I want to do is have another worksheet which is 'Accounts Payable' and on that worksheet I want to be able to list all the invoices that make up the journal total on the 'General Ledger' worksheet.
I have tried to create a link using a sub query condition but when I run the report, the first part 'General Ledger' works fine but when I click on the 'Accounts Payable', I get a "Invalid Number" error message.
I am going to need to create these type of links for various reports.
I would be very grateful if anyone can please advise on how to create the link.
Thanks

I think you're on the right track with the subquery. So, the wrong number error must be related to the format of the columsn you use for the subquery.
Alternatively, if the account number you've created the parameter for in sheet 1, you can use the same parameter again for sheet 2 (then check "only one value for all sheets" for that parameter). But this obviously only works if that account number is in the second sheet too...

Link between two or more reports

Hi All,
I want to make a link between two Hyperion Financial Reports. I'm working on HFR 9.3.1 version.
For example :-
There must be an option in report, like a hyperlink to open another report. After a click on the link it will open the linked report.
I tried one option "Add releated contents" but that works only on grid which are having cell values but what I'm looking is to give a link on text and from that text link user will able to navigate.
Regards,

Sorry I just thought of a workaround
You do have to use related content on a data value but you can use formatting to hide everything but the link. Use the REPLACE tab within the cell format to relace the data value with a text string (what you want your URL to display as). If you want it as a menu then you could do this in a seperate grid altogether to save you having to mess with your actual report grid too much.
Hope this helps
Stuart

I need to implement Drag N Drop between two tables which saves both records

I need to implement Drag N Drop between two tables which saves both records in a third page, by using drag n drop.

check this video http://baigsorcl.blogspot.com/2011/01/drag-and-drop-collection-in-oracle-adf.html

After installing lion os logic pro asks for the serial number but will not accept it

after installing lion os logic pro asks for the serial number but will not accept it

Start Here:
http://support.apple.com/kb/TS2005

Swapping total contents between two Macbook Pros

What would the procedure be to swap everything between two Macbook Pros?

You might consider Target Disk Mode;
http://support.apple.com/kb/ht1661
Are you transferring data from A to B and B to A?
Ciao.

How can a session be setup between two MacBook Pro's at different locations on high speed Internet connections, be setup to have a live recording session in Logic?

My partner and I live on opposite sides of the valley here in Phoenix. About 50 miles apart one way. We are Musicians and are working on a commercial for television, and would like to know if there is a way, between FaceTime and Logic, that we can configure our MacBook Pro's to record sessions together without having to be at the same house? When we FaceTime, he can hear my keyboard through his headphones, but we can't seem to get the signal routed into Logic and register to a track when its record enabled. Is there a way for us to save gas, and record at seperate locations, so he can engineer me and I can engineer him, while we build this project in Logic and Final Cut? Here is what we are using, we have nearly identicle setups, which was planned so we might be able to do something like this. Both of us are using Mid 2012 15" MacBook Pro's with 2.6GHz Intel i7 processors and 16GB RAM. The only difference between the two MacBooks is that his has an Optical Drive, but I removed mine and replaced it with a 2nd SSD Drive, so I have two Samsung 840 Pro's each with 512GB in my MacBook Pro. His just has one Samsung 840 Pro with 512GB. We both use Focusrite Saffire Liquid 56 Firewire Audio Interfaces, and we both use Logic Studio 9 Academic. I don't know if you need to know what we are using in order to help us figure out how to configure the MacBooks for a live session, so I figured I would give you those details just in case. If you need any more information, just let me know? Oh, we both have high speed cable Internet connections. Mine is 150Mbps speed which is the absolute fastest I can get in my area. And his is only a 50Mbps speed line.
Again, what we are looking to do is have a LIVE recording session, in Logic, with him at his house and me at my house. When we FaceTime each other, we can pretty much hear each others keyboards as if they were part of the conversation, and as crystal clear as we can hear our own when recording, but we can't seem to record enable an Audio track in Logic and route that keyboard signal into Logic and record it so we can engineer each other without either one of us having to drive to the others house, to be there to do it. If any of this even makes sense, I'm not quite sure how to better explain it. So hopefully you get what I mean, otherwise just say so, and I will try to do a better job explaining it. :-)
Anyone who can help us with this little problem would be greatly appreciated, and quite a hero in these two humble Musicians Worlds!! So from both of us, THANK YOU in advance for any input you might be able to give us. I look forward to hearing any and all suggestions.
Scott

Hey Scott
You and ALOT of people are attempting to do this, myself included.
Unfortunately at this point (to my knowledge) it's a pretty CRAP setup involved that will likely leave you frustrated.
HOWEVER:
A few things CAN be done:
IF you are getting live audio from your partner over the internet, you can re-direct that audio directly into Logic using a program called SoundFlower.
There are a few alternatives to SoundFlower, like JackTrip, and.....(the name eludes me)
(SoundFlower is from a company called Cyling 74 who also makes Max MSP. )
Once in Logic, you set your audio inputs to the track to be Soundflower. (either 16 inputs, or in this case 2)
That all being said, regardless to speed, you are still going to experience latency in the connection, and THAT is the part that will likely drive you to the mad house.
THIS all being said, I believe there are websites out there that are set up to actually do this kind of thing, (at least there WERE) but likely membership costs, and other "hidden" problems that you only learn about after you have signed on the dotted line. (Hopefully I am wrong?)
If you don't need to do a "live jam", there are always solutions like DropBox that work very well for exchanging large files quickly.
If you want to record live MIDI input from his keyboard, I am unaware of any solutions for this.
Due to the popularity of the iPad, you might want to look into the App store, and see if there is something available.
Good luck!
Treatment

Logic Pro X guitar recording issues

I am using a Line 6 Toneport GX to record my guitar tracks using Logic Pro X on a 2014 Retina macbook 13"
I don't know why but my volume needs to be maxed out for me to even hear any guitar signal (by pressing volume up on the keyboard) Then there's this horrendous buzzing constantly heard when i am not playing any notes.
What is the deal??? The guitar tone itself sounds terrible no matter which amp preset I am using.

1) Zooming
the zooming with the swipe gesture was always problematic, but it is now only happening in the Audio FIles Editor and to some extend in the Score Editor. All the other windows work fine on my machine.
2) Resize Tool
Works fine without a problem in the Main Window and the Editor windows. Of course, you can resize in the Audio FIles Editor.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Logic Pro and Audio Recording

I just read the incredibly depressing post entitled "should emagic buy back logic?" and I'm more confused than ever about purchasing Logic.
I am primarily a guitar player and will be recording mostly real instruments. I would like to learn more MIDI, but this is not my priority. I am VERY torn between ProTools LE (Digi 002) and Logic with a MOTU.
My question is this: What exactly does everyone mean when they say ProTools does "audio" better than Logic?I mean, what is the MAJOR difference? And should this HEAVILY be taken into consideration when purchasing one or the other? I am really torn here and am going on my SECOND month of contempalation on this issue. I just want to make sure I make the right purchase because either way it is a lot of money and I am pretty much commited to one product or the other once I choose. Thanks for the help everyone.

Jack Q,
I am in the same boat as you. I did buy Logic pro. I also have a digi001 and thought very much about the decision. I record straight audio and found more midi people working with Logic than protools. My questions before getting Logic about how many people were using it for straight audio did not ellicit an overwhelming response. Here is my opinion based on owning Logic for almost 6months.
The manual (for me) is almost useless. I am a hands on kinda guy and needed to be shown how to do many functions in person.I paid someone to help and it still was and is a huge learning curve. I came from protools which in my opinion is much more user friendly.
I bought logic pro because I have a nice apogee interface and Protools (002)does not support 92 sample rate that my appogee is capable of and higher. I also bought logic because the PLUG INs that come with it are a great value. The plugs that come with the 002 are NO comparison and very costly. I f you do get a protools rig DO NOT GET AN 002. Move up to the HD world because in the long run you will kick yourself.
This forum has helped me so much and I have begun to learn alot!!!!! The people here will really help you...and you CAN COUNT ON THEM.
Certain things about Logic really frustrate me such as there are SO MANY OPTIONS. It is a bit overwhelming. IMO. the editing is cumbersome and confusing with LOGIC.
Some people talk about LOGIC being a creative tool as opposed to protools being more of a simpler recorder and editor.I believe this to be true and ideally it would be great to have both. I am starting to enjoy Logic more and more...but if I had it my way and had the money...I would have PT HD3 and alot of even more money for plug ins.
Logic is a great value. It has lots of fun stuff to play with like loops etc. Depending on what kind of music you make it might also influence your decision. I still love my 001 and have made some good recordings that have been used on TV. I heard some cool things about Logic and wanted to upgrade the QUALITY of my recordings with the Appogee interface which as I've said before was my main reason for getting Logic.
I am a guitar player and also record live drums, bass and keys with Logic. I am still having some trouble adjusting to the nuances of how to keep it simple as a recorder and editor/mixer/master. It is slowly coming together and I can hear that the quality is very good. I personally don't like messing around with key commands as that makes me even more confused. I just lik to point my mouse and go. It seems that no matter how I slice it Logic takes a few more steps than protools does. for expample punching in etc.
ALL AND ALL..I am glad to have 2 systems. Logic familiarity is growing on me and even though I get bothered sometimes...in the long run...with the help of this forum...everything will be smooth and I'll have more time to actually make music. If you have any more questions feel free to e-mail me.
Good luck with your decision..read alot..asl questions an go look at logic in an APPLE STORE or firend house before buyiong

Logic Pro 9- Audio Recording with Rewire?!?!

Id really appreciate if someone could help me out with this
I've been running Rewire through Logic Pro 9 and Reason 4, with Reason being the slave of course, and trying to record audio tracks in Logic from Reason. Does anyone know how to do this??
I know how to setup channel auxillary tracks to hear the midi tracks from Reason, and have tried setting up a bus to channel the output to record to an audio track and it hasn't worked
Can anyone please explain how to get an output on an audio track from a Reason midi track to record it please?

The 32bit bridge has a long history of instability... so your experiences are not unusual.
This is probably one of the major reasons why the bridge and use of 32bit plugins, was finally removed in LPX..... as LPX only supports 64bit AU plugins.
However, you can use something like VEP or 32Lives to run 32bit plugins in LP9 64bit mode.. without the use of the 32bit bridge (and in LPX which doesnt have the bridge) and this does improve stability.
See this user tip for links etc...
https://discussions.apple.com/docs/DOC-6981

Linking between two Logic Pro machines for recording...

Similar Messages

Maybe you are looking for