Linking Captivate 5 tutorial with two other tutorials that have assessments in an LMS

Our HR department recently bought an online LMS system and have never used it.  I've create a tutorial, basically an introduction to a new time management system.  At the end of this tutorial our employees will click a button to take them to either the exempt or non-exempt tutorials to view. Both the exempt and non-exempt tutorials have an assessment built in. 
How do I link these two tutorials to the introduction tutorial so that the LMS will recognize the links when I upload them?  The LMS system requires each tutorial be zipped before uploading.  Any help would be tremendously appreciated as they want this to go live Monday!
Bren Lane
Pinnacol Assurance

You likely can't do that.
You might be able to if your LMS supports SCORM 2004's 'sequencing' capability. Ask your LMS vendor if they do.
IF they do, then you have to work out how they implement it and ensure your manifest properly directs the user to the correct lesson... I've never done that, so no idea how that should be implemented...
In most cases, however, such pathing is something you setup in the LMS itself. For example, in our LMS, you would setup two groups - one for exempt personnel and one for non-exempt personnel.
Group 1 (exempt) would be assigned, or otherwise have access to, the Intro tutorial lesson, then the exempt assessment; so two separate lessons, perhaps the second locked until completion of the first.
Group 2 (non-exempt) would be assigned or otherwise access the same Intro tutorial lesson but then the non-exempt asssessment.
How you set that up, however, depends on your LMS.... It would likely be the easier way to do it...
Erik

Similar Messages

  • Captivate 5 - issue with editing imported PowerPoints that have been resized

    I'm having an issue with editing PowerPoint files that have been imported into Captivate 5 when they have been resized within the Captivate project after the initial import.
    1. I import a PowerPoint presentation into 800x600 dimension.
    2. I resize the project to 900x600 by not locking the aspect ratio and selecting to position to the top right so there is a 100 pixel strip to the left of the slide that we use for navigation buttons and other info.
    3. If I need to make a change to a PowerPoint, I select Edit > Edit with Microsoft PowerPoint > Edit Slide (or Edit Presentation).
    4. The slide opens in PowerPoint and I make the changes and click Save.
    5. When the slide is imported back into Captivate, it is stretched and resized to not fit either 800x600 or 900x600, but something in between. This did not happen in Captivate 4 - the slide would retain the 800x600 dimension slid over to the right with no issues.
    Are there any settings that can be done to ensure the edited slides will import back into the project with the correctly sized dimensions for the current project?

    Hi there
    I agree that it would be nice to see a notification. You know, Captivate offers a special area for notifications that appear when you open it. I'm stymied as to why Adobe doesn't use this area for making such announcements.
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other. We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this

    I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other.
    We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this domain and working properly.
    now i am trying join the Mumbai location PC with my Domain(CAPLDC) but they are not join with my DC and generate the error.
    I have chek the DNS and nslookup all are correct but this is generate error. 
     Is this possible Mumbai location join with this Domain(CAPLDC)???
    One more thing when i have created another DC with this name (papldc.com) then Mumbai location is joined properly.
    Pls find the error message below and also find the attachment.
    Note: This information is intended for a network administrator.  If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
    The domain name "capldc" might be a NetBIOS domain name.  If this is the case, verify that the domain name is properly registered with WINS.
    If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
    DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "capldc":
    The query was for the SRV record for _ldap._tcp.dc._msdcs.capldc
    The following domain controllers were identified by the query:
    capldcserver.capldc
    win-dyfq2poc88q.capldc
    However no domain controllers could be contacted.
    Common causes of this error include:
    - Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses.
    - Domain controllers registered in DNS are not connected to the network or are not running.
    Pankaj Kumar

    Why are you using a single labeled domain? I would recommend renaming the domain name to be something like domain.com.
    Please refer to the articles below to fix your current issue:
    http://www.wincert.net/tips/networking/1614-cant-join-pc-to-a-domain-with-single-label.html
    http://www.itgeared.com/articles/1128-using-single-label-dns-names-for-active/
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • How to link one scroll bar with two dynamic text boxes.

    How to link one scroll bar with two dynamic text boxes.
    If i move scroll bar in one text box,automatically text will
    be moved in another text box.But scroll bar is not visible.
    Can you please help me.
    Thanks in advance.

    See the following article:
    JavaScript - setFocus Method for tabbing to next form field
    And see if iOS can even handle the sample form.
    iOS and android devices are not a powerful as your desktop of laptop computer and have limited support for JavaScript within PDF forms. This limitation for specific apps ranges from none to quite a bit but not all JavaScript.

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

  • I live in a home with two other people, and one housemate tried to sync up his content from iTunes and iCloud onto another housemate's new iPad. the iTunes library only contains my content. is there any way to retrieve the there person's iCloud?

    i live in a home with two other people, and one housemate tried to sync up his content from iTunes and iCloud onto another housemate's new iPad. the iTunes library only contains my content. is there any way to retrieve the other person's iCloud? Can they go out of my account? Their content is saved on their iPads, but can another iCloud be on the same home computer?

    The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
    https://discussions.apple.com/docs/DOC-3141

  • I have an icloud account with two other users besides myself.  We share the same game center.  We want our own. My two children want their own Clash of Clans account!  What do I do?

    I have an icloud account with two other users besides myself.  We share the same game center.  We want our own. My two children want their own Clash of Clans account!  What do I do?

    Log out of Gamecenter and try downloading CoC again. if it doesn't prompt you with a new village, try downloading with a different apple id. if that doesn't work, you would need a new device to create a new village and transferring it to your sons device using the code in the CoC settings.

  • I've been given under warranty what us supposed to be a new iPhone 5. When I try and restore it from my iCloud it keeps asking me to sign in with two other Apple ID's that are not know to me. Why is this?

    I've been given under warranty what us supposed to be a new iPhone 5. When I try and restore it from my iCloud it keeps asking me to sign in with two other Apple ID's that are not know to me. Why is this?

    Adding to KC7GNM's remark (with which I agree), the iPhone 5 you received is very likely refurbished.  It is not brand new out-of-the-box, never before used.

  • I'm having lots of trouble finding semi-decent equipment at an affordable price. I would like to start a podcast with two hosts and I have a macbook pro that i purchased in april 2011. any suggestions?

    I'm having lots of trouble finding semi-decent equipment at an affordable price. I would like to start a podcast with two hosts and I have a macbook pro that i purchased in april 2011. any suggestions?

    I should keep it simple - if you start getting involved with mixers and multiple microphones you will find the cost escalating  alarmingly. If you can get yourself a decent microphone and spend some time doing tests to find the best way of balancing the voices you should be able to get acceptable results. You can't plug an ordinary microphone directly into a Mac - you would need a mixer or a preamplifier - so it's probably worth looking at USB mics. I don't know what cost range is available, and you would have to check that they would work with your Mac. Otherwise you will need an ordinary moving-coil mic and probably a USB audio converter which can accept a microphone - look at the Roland site.

  • My head phone jack isn't working. Only works with the new headphones that have three rings at the bottom. My regular ones with two rings don't work with the computer anymore. Anyone know a fix?

    My head phone jack isn't working. Only works with the new headphones that have three rings at the bottom. My regular ones with two rings don't work with the computer anymore. Anyone know a fix? Ive tried reseting my computer and that didnt work

    Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
    http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
    https://www.youtube.com/watch?v=gLbasVD69xo

  • Tthe flood filter is in my plugins folder along with the other plugins I have, but not in cc 2014. It's also in Adobe bridge associated with cc 2014, but not in cc 2014 Photoshop. i hope you get this because i forwarded  your info to HCS and now I'm all m

    the flood filter is in my plugins folder along with the other plugins I have, but not in cc 2014. It's also in Adobe bridge associated with cc 2014, but not in cc 2014 Photoshop. i hope you get this because i forwarded  your info to HCS and now I'm all mixed up as to this gets forward.

    Unfortunately, you are not addressing Adobe here in the user forums.
    However, there are many highly experienced volunteer users here willing to help.
    Can you please clarify:  are you saying that your Flood filter (whatever that is) is in your Bridge folder but not in Photoshop?
    UPDATE:  I Googled your Flood Filter and discovered it's not an Adobe filter at all.  Have you contacted its manufacturer, Flaming Pear?  What do they say?

  • I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?

    I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?

    RE: SATA Bus speed:
    Typical Rotating drives available today, whatever their SATA spec, can source data off the spinning platters no faster than about 125MBytes/sec.
    SATA 3 is rated at 6G bits/sec, which theoretically is about 750 Mega Bytes/sec
    SATA 2 is rated at 3G bits/sec, which is theoretically about 375 Mega Bytes/sec
    SATA 1 is rated at 1.5G bits/sec, which is theoretically about 187.5 Meg Bytes/sec
    None of the SATA Busses is a bottleneck for consumer Rotating drives you can buy today. Trying to speed up the SATA Bus will not provide any real-world performance increases for Rotating Drives.
    https://discussions.apple.com/message/22690384

  • [svn:fx-trunk] 13453: Updating mergeinfo with 3. x revs that have already been merged.

    Revision: 13453
    Revision: 13453
    Author:   [email protected]
    Date:     2010-01-12 10:47:04 -0800 (Tue, 12 Jan 2010)
    Log Message:
    Updating mergeinfo with 3.x revs that have already been merged.  This is for svn merge tracking purposes only
    QE notes: no
    Doc notes: no
    Bugs: no
    Reviewer: no
    Tests run: no
    Is noteworthy for integration: no
    Property Changed:
        flex/sdk/trunk/

    T61-Elwood wrote:
    Laptops of all Brands using Nvidia GPUsmade  from 2007-2008  are faulty.
    You wont get good Nvidia ones on Ebay/forumes anywhere.
    I'd beg to differ on both accounts.
    *61 series nVidia-based ThinkPads from late January through July of 2008 are a 50/50 shot, since the old chips were mixed with the new ones. Any machine built in August and later can be deemed "safe".
    As for the forums (I don't do feebay) there are people who sell genuine, properly-tested planars. However, these do not come at bargain basement prices, and with a good reason if I may add.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Link Group and Wiki with each other as follow-up

    Hi,
    I have a Wiki in place on the MAVS and a group as well. I, however, didn't create the wiki through the button "Create wiki for Group" in the group-management from server.app.
    I would like to link the wiki with the group so that the button "Create Wiki for Group" in server.app's group-managements page disappears.
    How is that possible?

    I posted this question about a month ago, but got no replies.
    Can anyone help with the above question? Basically I have an Airport Extreme base station and two Airport Expresses set up in a triangle formation. I would like the two Expresses to pick up the signal from the Extreme
    base station AS WELL AS from each other. That way I have some overlap/redundancy to decrease the frequency of lost signals if one Express loses the signal from the Extreme base station but not from the other Express.

  • Filling temporary table with two other tables.

    Hi everyone,
    In an start routine, I would like to do the following :
    read values in an internal table, save it in temporary table tab1.
    read values in an internal table (the same with a different request) and save it in temporary table tab2.
    save with no duplicate keys and in a sorted table tab3 the result of the two tables.
    I have coded like this, but it doesn't work, since the final table is empty.
    Indeed, the system says it is tried to insert a duplicate key. How is it possible using instruction INSERT ?
        DATA : t_agence_1 TYPE SORTED TABLE OF ty_agence
                       WITH UNIQUE KEY /BIC/C_AGENCE2
                       WITH HEADER LINE.
        DATA : t_agence_2 TYPE SORTED TABLE OF ty_agence
                       WITH UNIQUE KEY /BIC/C_AGENCE2
                       WITH HEADER LINE.
        DATA : t_agence TYPE SORTED TABLE OF ty_agence
                       WITH UNIQUE KEY /BIC/C_AGENCE2
                       WITH HEADER LINE.
    SELECT * FROM /BIC/PC_AGENCE2
          INTO CORRESPONDING FIELDS OF TABLE t_agence_1
          FOR ALL ENTRIES IN DATA_PACKAGE
               WHERE CALMONTH = DATA_PACKAGE-CALMONTH
               AND /BIC/C_AGENCE2 = DATA_PACKAGE-/BIC/C_AG1
               AND objvers = 'A'.
         IF sy-subrc = 0.
           INSERT LINES OF t_agence_1 INTO TABLE t_agence.
         endif.
       SELECT * FROM /BIC/PC_AGENCE2
          INTO CORRESPONDING FIELDS OF TABLE t_agence_2
          FOR ALL ENTRIES IN DATA_PACKAGE
               WHERE CALMONTH = DATA_PACKAGE-CALMONTH
               AND /BIC/C_AGENCE2 = DATA_PACKAGE-/BIC/C_AG2
               AND objvers = 'A'.
       IF sy-subrc = 0.
              INSERT LINES OF t_agence_2 INTO TABLE t_agence.
       endif.
    Thanks if you can help !
    regards
    fred
    Edited by: Christophe BELIN on Dec 5, 2008 3:43 PM

    Shanon,
    You would handle the parent with two child tables exactly the same way you would a parent with one child.
    1) Bring in all 3 tables through the Database Expert.
    2) On the Links Tab, place the parent table on the left of the window and the two child tables to the right (yes there is a reason for doing this).
    3) Delete any CR generated links between the tables.
    4) "Draw" a link that starts from the parent table to the 1st child table and then again, from the parent to the 2nd child.
    a. I'm assuming that you know which fields to link on.
    b. No links between children.
    5) Once you have both links in place right click them and change the "Link Type" to "Left Outer Join"
    a. The reason for doing this: It allows ALL of the parent records to come through, even if they do not have any matching records in
    one or both of the child tables.
    Hope this helps,
    Jason

Maybe you are looking for

  • How do I get the Username of an AnyConnect VPN session via SNMP?

    I would like to monitor the usernames of my AnyConnect sessions via SNMP.  This will allow me to monitor, graph, report, and alert using Solarwinds Orion (or any other SNMP software). I would like to monitor this on my ASA 5520. I have run the show s

  • IPhone 5 isn't being recognized by iTunes.

    iOS/os/iTunes all up to date. I plug in through lightening and I get no Sounds to indicate connection and my device doesn't pop up in iTunes. However, I plugged my iPad into our iMac (same computer I tried the 5 on) and it works just fine.

  • How do I tell iCal which email address to use in Address Book?

    iCal's help files on how to set an email alarm for iCal are clear as mud to me. If I click on alarm in Info of an event, select email as type of alarm, then a popup says must add card with name and own email in Address Book. Fine, click on Open Addre

  • MOVED: Memory upgrade | PC won't boot

    This topic has been moved to Intel P4 and Celeron boards. Memory upgrade | PC won't boot

  • What is meant by Every Other Day- in oracle Alerts?.

    Hi All, we have many type of frequency in periodic alerts in oracle alert. ex. like on demand, On Day of the Month, On Day of the Week, etc.. what is diff b/w: Every N Calendar Days, Every Day and Every Other Day these three. Some one can briefly exp