Linking Characteristics with table VBAP

I have created a set of characteristics which I assign to each service line item in the sales order.
How do I link these characteristics to table VBAP?

David,
This is the scenario:
Example 1
Material Code = 123
Title = Training 1
Delivery Type = Classroom Learning
Language = English
Currency = USD
Example 2
Material Code = 123
Title = Training 2
Delivery Type = On Demand
Language = French
Currency = EUR
I used variant configuration:
I did the following:
1. Created a configurable material 123 with material type KMAT
2. Created a class1 with variant class 300
3. Created characteristics title, delivery type, language
4. Assigned values to each characteristic like titleu2026training 1 & 2, delivery typeu2026Classroom & on-demand and languageu2026.. English & French
5. No Pricing attached to table SDCOM, Field Name VKOND
I have to assign each combination of the above variant to a wbs element :
e.g:
Line item 1 in sales orderu2026u2026u2026u2026u2026u2026u2026..Training 1 u2013 Classroom training u2013 Englishu2026u2026u2026u20262 LU X $1000 = $2000u2026u2026assigned to WBS element
Line item 2 in sales orderu2026u2026u2026u2026u2026u2026u2026..Training 2 u2013 Classroom training u2013 Frenchu2026u2026u2026u2026.1 LU X $1200 = $2400u2026u2026assigned to WBS element
Line item 3 in sales orderu2026u2026u2026u2026u2026u2026u2026..Training 3 u2013 On Demand training u2013 Englishu2026u2026u2026..2 LU X $2000 = $4000u2026u2026assigned to WBS element
Totalu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026$8400
This is not pure variant configuration as there is no pricing to VA00
the process is working but for reporting
Saliim

Similar Messages

Crystal Report linked to a table with filter attached

I have a Crystal Report based on 2 tables and I want it to display every incident in the incident table and to pull the truckID of the
first truck on the scene from the truck table . So the finished product should look like this…
IncidentID IncidentNum ResponseTime First Arriving Truck Disctict
1x44452 1258ab55 5:32 B8 2
*The first arriving truck is the truck in the Truck Table with the same IncidentID and the earliest ArrivalTime. There will be multiple trucks for each incident but I want it to only show the one that arrived first (ArrivalTime). So one line per incidentID.
Incident Table
IncidentID
IncidentNum
ResponseTime
District
Truck Table (Will contain many trucks for one incident with the following info
Truckkey
IncidentID (Link to Incident Table)
ArrivalTime
TruckID
I figure I probably need to build a formula with the min function or perhaps an OnCommand – I’m just not sure.
The biggest issue is the overall report has 4 filter settings. They can select a date range, a location, an incident type and a range for the response time. So I do this with the Select Expert
I can get all of that to work except I cannot figure out how to get it to pull the First Arriving Truck without duplicating the incident
line. Also, if there is a Truck with an ArrivalTime of Null I want it to ignore that Truck Table record.
Can anyone help???

Hi Debbie,,
You may try this:
1) Go to the Group Expert > Create a Group on the 'Incident ID' field from the Incident Table
2) Insert a summary on the 'Arrival Time' field and place the field on the Group Footer
3) Move all the fields from the Details section to the Group Footer
4) Go to the Group Selection Formula (Report > Selection Formulas > Group) and use this code:
{Truck.ArrivalTime} = Minimum({Truck.ArrivalTime}, {Incident ID})
5) Suppress the Details Section
-Abhilash

ORACLE EXPRESS: build a page with multiple forms linked to one table

hi,
im using oravle application express. APEX
i would like to build a page with multiple forms linked to one table (orders) , the page has 4 from each one with different order_id number (depending on filtering), and if the order is prepared click yes for each order and this 'YES' should be UPDATED AND SAVED to each order number in the same table with the press of one button.
i created all the form as (sql query)
and create one update process
(UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_1
WHERE ORDER_ID =:P10_ORDER_ID_1;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_2
WHERE ORDER_ID =:P10_ORDER_ID_2;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_3
WHERE ORDER_ID =:P10_ORDER_ID_3;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_4
WHERE ORDER_ID =:P10_ORDER_ID_4;
i dont know really if i can do that, but it appear hat it actually saving according to order_id number , but not all the time some time it saved the value as "null".
please guide me what is the correct way to do this.
I READ THIS ONE
http://stackoverflow.com/questions/7877396/apex-creating-a-page-with-multiple-forms-linked-to-multiple-related-tables
BUT IT WAS FOR MULTIPLE INSERT
thanks.

Sans,
I am no Apex expert, but with a situation as "complex" as yours, have you thought about creating a VIEW that joins these 7/8 tables, placing an INSTEAD OF trigger on that view to do all the business logic in the database, and base your application on the view?
This is the "thick-database" approach that has been gaining momentum of late. The idea is to put your business logic in the database wherever possible, and let the application (Form, Apex, J2EE, whatever) concentrate on UI issues,

How can I link table KONV with table VBRP and VBRK using KSCHL field?

Hi experts,
How can I link table KONV with table VBRP/VBRK using KSCHL field so that items are fully filtered?
Thanks,

Hi,
If you do not want to specify it as hard code, then define a variable for it if you want to pass the value for it from the selection screen so that it will be dynamic. Code will be as follows.
select-options: x_KSCHL for T685l-KSCHL.
select kwert
           kbetr
           knumv
           kposn
           kschl
      from konv
      into CORRESPONDING FIELDS OF TABLE it_konv
      FOR ALL ENTRIES IN it_all
      where knumv = it_all-knumv
      and   kposn = it_all-b_posnr
      and   kschl in x_KSCHL. "Dynamic Selection as per the selection screen input
endif.
Hope this helps.
Regards,
Chandravadan

Table that links bills with delivery

Hi experts,
I Amb searching a table that links bills with deliverys, can someone help me with this please?
Thanks!
Artur.

Hi Arthur,
You can check table VBRP. You will have both the billing doc number (VBELN) and the reference doc number (delivery/order - VGBEL) in this table.
Regards,
Mike

Tables:Linking excise part1 table entries with relevant storage location

Dear experts
I want to link the excise table entries to the relevant storage location at the time of excise relevant goods movement ( includes , GR , consumption & returns etc)
Can anyone please tell me the tables that wud have to be searched?
regards,
Edited by: Prasanna Shetty on Dec 4, 2008 12:04 PM

Hello,
J_1IEXCDTL = Excise invoice line item details
J_1IEXCHDR = Excise invoice header detail
All excise related tables you will get by entering J_1i* in table name and press F4 in SE16.
Regards,
Shailesh

How do we link a new table to CRMC_OBJECTS?

RE: CRM4
I tried to use the BBP_PDIGP table in the CRMC_MAP transaction for UI Structure CRMT_ISALES_BASKETITEM_BBP, but it says that table is not part of CRMC_OBJECTS
How do we make BBP_PDIGP table part of CRMC_OBJECTS?
If we can link the BBP_PDIGP table to CRMC_OBJECTS, then I can map MATGROUP from the UI Structure above with CRMC_MAP to SCHEMA_TYPE.
Next, we need to map the SCHEMA_TYPE in CRM to the field in ERP that we have the data already.
Sounds simple enough...but, I don't know how to do the linkages.
Otherwise, how might we link the field SCHEMA_TYPE found in table BBP_PDIGP to one of the objects already found in the UI Structure CRMT_ISALES_BASKETITEM_BBP - Here's the available list:
AC_ASSIGN     Settlement Account Assignment (CRM)
ACCOUNTING     Account assignment
ACTION     Actions
ACTIVITY_H     Header data activity
ACTIVITY_I     Activity Item Data
APO_I     APO item data
APPOINTMENT     Dates
ATTACHMENTS     Attachment set, not BDS!
BATCH     Batch Properties
BILLING     Billing data
BILLPLAN     Billing plan
CANCEL     Cancellation
CONDITION_COM     Communication structure condition det.
CONDITION_H
CONDITION_I
CONDLINE
CONFIG     Configuration data item
CONFIG_FILTER     Configuration filter item
CONFIRM     Availability confirmation
COPY     General copy control
COUNTER_H     APO Item Data
COUNTER_I     APO item data
CREDITVALUES     Open Transaction Credit Values
CRMD_CASE     CRM Case Management
CUMULAT_H     Header totals
CUMULATED_I     Item cumulation values
CUSTOMER_H     Customer header data
CUSTOMER_I     Customer item data
CUSTTAB_H     Table-Like Header Data for Customer
CUSTTAB_I     Table-Like Item Data for Customer
DOC_FLOW     Document flow
DYN_ATTR     Dynamic attributes
EVENT     Event handler
FINPROD_I     Financing product data item
FREIGHTCOST     Shipment costs
IPM_RCHAR     Rights Characteristics
IPM_RCTRL_I     Rights Control Data
LEAD_H     Lead Header Data
LIMIT     Limit
LINK     Link Handler
MESSAGES     Message Handler
OPPORT_H     Opportunity header data
ORDER     General order processing
ORDERADM_H     Administration header
ORDERADM_I     Administration item
ORDPRP_I     Connection PPR to transaction item
ORGMAN     Organizational data
PARTNER     Partner Set
PAYPLAN     Payment Schedule
PRICING     Pricing Data
PRICING_I     Pricing data und results
PRIDOC     Pricing document
PRIDOC_COM     Communication with price determination
PRODUCT_I     Item product data
QUALIF     Qualification Requirement Set
REFOBJ     Service Reference Object
SALES     Sales data
SCHEDLIN     Schedule lines
SCHEDLIN_I     Scheduling lines item view
SERVICE_H     Service header
SERVICE_I     Service item
SERVICE_OS     Service reference object subject
SERVICEPLAN_I     Service Plan Item
SHIPPING     Shipping data
STATUS     Status
STATUS_H     Header Total Status
STRUCT_I     Item structure data
SUBJECT     Service Subject
SURVEY     Questionnaire
TAX     Taxes
TEXTS     Texts
TOLERANCE     Tolerances

Hi Mike,
Will it be possible for you to let me knw how the entries come in table CRMD_LINK...??
I am not getting the entry of orgman in this table for item guid.
Pls help.
Thanks,
SA

Issue with table ROOSPRMSF entries for data source 0FI_AP_4

Hi Experts,
I am facing with an issue where we found incosistencies with table ROOSPRMSF in R/3 system.
In BW , we have done initializations based on fiscal period selections (none of the selections overlap) for data source 0FI_AP_4.
We have done in total 7 initializations. So in BW system in table RSSDLINITSEL we have 7 initialization requests.
But in R/3 system we have 49 records for data source 0FI_AP_4 in ROOSPRMSF table out of which 42 are invalid records.
I suspect that these 42 invalid records are created due to the execution of program RSSM_OLTP_INIT_DELTA_UPDATE when the tables ROOSPRMSF are actually holding the 7 initialization request entries. Due to this each and every initialization request is linked to rest of the other intialization requests and ended with 49 records in table ROOSPRMSF table.
Now our data loads are running fine but daily a short dump is raised . In the daily loads, BW init records in RSSDLINITSEL are compared with ROOSPRMSF entries and all the other 42 records which are invalid are written into system log and a short dump is raised.
In order to fix these inconsistencies i checked for OSS note 852443. (Point 3 in OSS note)
But it is specified to delete the delta queue for data source 0FI_AP_4 in RSA7 and instructed to execute the program RSSM_OLTP_INIT_DELTA_UPDATE so that the ROOSPRMSF table will be reconstructed with valid records available in RSSDLINITSEL.
From OSS note 852443 point 3
"3. If the RSSDLINIT table in the BW system already contains entries, check the requests listed there in the RNR column in the monitor (transaction RSRQ). Compare these entries with the entries in the ROOSPRMSF and ROOSPRMSC tables with the INITRNR field. If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers, use transaction RSA7 in an OLTP source system to delete all entries and then use the RSSM_OLTP_INIT_DELTA_UPDATE report mentioned in the next section. For a DataMart source system, delete the entries that you cannot find in the RSSDLINIT table using the procedure described above."
My question is if we delete the delta queue in RSA7 then all the tables in R/3 (ROOSPRMSF, ROOSPRMSC, Time stamp table) and BW (RSSDLINITSEL, initialization requests will be deleted) will be cleared. Then how will the program RSSM_OLTP_INIT_DELTA_UPDATE copy entries into ROOSPRMSF table in R/3 ?
Could any one please clarify this ?
Thanks
Regards,
Jeswanth

Hi Amarnath,
Did you unhide the new field in RSA6 and regenerated the DataSource?
Often SAP will populate newly added fields (belonging to the same (set) of table(s) used for extraction) automatically (e.g. SAP uses 'move-corresponding' in it's extractor-code, or, in this case, reading all fields from the DD, FM BWFIU_TRANSFORM_FIELDLIST).
If the DataSource looks fine to you and the field is still not populated in RSA3 you can't go without a user-exit.
Grtx,
Marco

Command Link in ADF table is not working/ PPR event not getting fired

Hi All,
I am having ADF Table, in that one column is with command link if click on command link, it is not navigating to corresponding page or method of a bean. If i give same command link out of the table it working fine, this issue i am facing is in IE9.
if i use IE in compatibility mode the links works fine, even in IE8 version also.
Browser: IE 9
Jdev version: 11.1.1.5.0
I tried all possible things, but nothing workout for me.
showPopupBehavior not working in IE9 for af:table buttons (jdev11.1.1.5.0)
Partial page rendering not working in ie9
Command Link in ADF table is not working
Thnks

Hi,
please file a bug if you have a customer support contract and provide a testcase
Frank

Link B/W table field and Applications

hi
Is there any transaction for Link B/W table fields and Applications.
regards,
pavan.

Hi
If you starts from delivery you can find the sales order number and item in LIPS table: LIPS-VGBEL and LIPS-VGPOS, if you need to start from sales order it should be better to use the table VBFA (document flow) and search the next document of sales order VBFA-VBELN and VBFA-POSNN with VBFA-VBTYP_N = 'J'
Max

How to link asset with purchase order and PO Item.

Hello,
I have to generate a report which contains columns
Asset No , po no(ebeln) ,PO Item(ebelp),Material no etc
My query is how to link asset with purchase order and PO Item.
I am selecting asset and po no. from anla but how to get
po item no(ebelp)?
po line item is important in this report because every line item has differrent asset and material no.
i tried to match asset no in mseg table but i am not getting asset no in mseg .
how should i proceed ?

Thanks Thomas & Srimanta for the quick response.
When I checked EKKN table by entering PO there is no asset no. in anln1 field.
Also I would like to add that, In me23n for a PO, account assignment category we are entering 'F' for internal order settlement.
Where can i find the link between asset and po no(ebeln) and po item(ebelp)?
Regards,
Rachel
Edited by: Rachel on Aug 11, 2008 7:23 AM

ABAP HR How to create infotype with table control in it like Infotype 0008

Hi Experts.
I need help from u guys. My client requirement is to create custom infotype just like 0008 infotype which contain table control to save amount and wage types. I try to create infotype with table control using PM01, but that table control is in display mode only, i almost search every where to create custom infotype with table control but what ever threads in forum all are they unanswered and most of the threads for creating infotype. But i already done with infotype , but my main problem is table control.
If any one have some suggestion for this please share with me.
<removed by moderator> i am looking for positive reply.
Edited by: Thomas Zloch on Aug 30, 2011 12:54 PM

Hi
I've created several infotypes with a Table Control and it is always the same story. You have to create a custom Z table to store the Table Control data (if you can have unlimited records), so in the PSXXXX structure you need to add a TABNR field to link the PAXXXX table and the Z one, just like the type table OM infotypes.
Then in your code you have to control every possible operation, INS, MOD, DEL... and update the Z table accordingly (the standard code won't do that)
If your TC fields appear in display mode, take a look at the Groups 1 and 3 in your fields, the must be set with the usual values for a PA infotype.
If you have more questions, just ask,
Regards

Linked Reports with Web Intelligence Rich Client

Hi,
Is it possible to build a linked report with WebI Rich client without using InfoView?
Assume the following simple report which select some fields of a file transfer information.
TransferID      Filename   Transfer Status
1                        a                       OK
2                        b                       OK
3                        a                       NOK
Now I want to click on the record with TransferID 3 and get some more information for that particular record such as:
TransferID      Filename   Transfer Status Date Duration
3                        a                       NOK         Feb 24      5
In other words, I'd like to do select of that table with the where condition "TransferID = 3" which corresponds to the record I clicked in my initial report.
Thanks a lot,
Kurt

Hi Kurt
Have you found any solution for "to link two tables in one WebI report without InfoView".
I will appreciate if you can share the same.
Regards
Naveed

Linking asset tracking tables

Hi all,
Can anyone help me with connecting tables mtl_material_transactions and fa_mass_additions.
I am using asset tracking, and after issuing item from inventory, it finishes in FA. How can I now which mass_addition belong to which material_transaction?
Best regards, Thanks for help

Varun,
Can you tell me the linking of FI tables with different modules
It would require a book to answer your question. Log onto a system and look at the repository (SE84), which contains info about tables and fields and programs that link objects.
which are the important fields in those tables.
All fields are important.
Unfortunately, this forum is not suitable for this type of question. I encourage you to obtain one of the many FI textbooks available and study this. Also, SAP offers many fine FI classes which would be another opportunity for you to get the basic FI knowledge you require.
Best Regards,
DB49

"own checkboxes" in Web with Table Interface?????????u00DF

Hi to all experts,
i have the following scenario:
I am using a query in web. Well in the lines there is a characteristic (for example sales org) and in the columns a keyfigure with an exception and a top10 condition. I think exception and condition are not important for my problem but the table is. Now i want to see in front off all lines a checkbox. That means i have - for example - now 10 sales organizations in my query and in front of all sales orgs there should be a checkbox. I think that should be realized with table interface. Now the user should be able to mark two ore more checkboxes to jump with the Report Report Interface by using a link to another Web report? Is that possible? Sounds hard i think or isnt it?
Regards,
M. Erbil

Hi Memo,
try the following. Create a template with a web item table. Than by using se24 create your own class for table interface. Change method DATA_CELL.
method DATA_CELL.
*CALL METHOD SUPER->DATA_CELL
EXPORTING
   I_X                   =
   I_Y                   =
   I_VALUE               =
   I_DISPLAY_VALUE       =
   I_NUMERICAL_SCALE     =
   I_NUMERICAL_PRECISION =
   I_CURRENCY            =
   I_UNIT                =
   I_ALERTLEVEL          =
   I_IS_SUM              =
CHANGING
   C_CELL_ID             =
   C_CELL_CONTENT        =
   C_CELL_STYLE          =
   C_CELL_TD_EXTEND      =
data: l_cell_content type string.
if i_x = 2 and i_is_sum <> 'X'.
    concatenate l_cell_content '<INPUT type=checkbox value=ON name='
    '' filter '' '>' into
    l_cell_content.
    c_cell_content = l_cell_content.
endif.
endmethod.
You can hold the value from characteristic in method CHARACTERISTIC_CELL:
method CHARACTERISTIC_CELL.
*CALL METHOD SUPER->CHARACTERISTIC_CELL
EXPORTING
   I_X              =
   I_Y              =
   I_IOBJNM         =
   I_AXIS           =
   I_CHAVL_EXT      =
   I_CHAVL          =
   I_NODE_IOBJNM    =
   I_TEXT           =
   I_HRY_ACTIVE     =
   I_DRILLSTATE     =
   I_DISPLAY_LEVEL =
   I_USE_TEXT       =
   I_IS_SUM         =
   I_IS_REPETITION =
   I_FIRST_CELL     = RS_C_FALSE
   I_LAST_CELL      = RS_C_FALSE
   I_CELLSPAN       =
   I_CELLSPAN_ORT   =
CHANGING
   C_CELL_ID        =
   C_CELL_CONTENT   =
   C_CELL_STYLE     =
   C_CELL_TD_EXTEND =
data: l_filter type string.
Store characteristic value of current row
if i_x = 1 and i_is_sum <> 'X'.
l_filter = i_chavl.
endif.
endmethod.
Please note that "i_chavl" holds the key value from characteristic.
Now back to method DATA_CELL and insert something like this:
filter = l_filter. "l_filter is set in method characteristic cell
so it look like this:
method DATA_CELL.
*CALL METHOD SUPER->DATA_CELL
EXPORTING
   I_X                   =
   I_Y                   =
   I_VALUE               =
   I_DISPLAY_VALUE       =
   I_NUMERICAL_SCALE     =
   I_NUMERICAL_PRECISION =
   I_CURRENCY            =
   I_UNIT                =
   I_ALERTLEVEL          =
   I_IS_SUM              =
CHANGING
   C_CELL_ID             =
   C_CELL_CONTENT        =
   C_CELL_STYLE          =
   C_CELL_TD_EXTEND      =
data: l_cell_content type string,
        filter type string.
if i_x = 2 and i_is_sum <> 'X'.
filter = l_filter.
    concatenate l_cell_content '<INPUT type=checkbox value=ON name='
    '' filter '' '>' into
    l_cell_content.
    c_cell_content = l_cell_content.
endif.
endmethod.
Hope it works
Regards,
Adem

Linking Characteristics with table VBAP

Similar Messages

Maybe you are looking for