Linking clips... audio and video clips move separately even though that are linked

Having trouble linking clips I am able to move them separately even though they are linked. sometimes they move together but most of the time not

Click the icon to the right of the magnet, under the yellow sequence timecode.

Similar Messages

  • Why are certain songs being transferred over to my laptop over and over again through Homesharing even though they are already in my new library?

    So I recently bought a new Windows laptop and tried using homesharing to transfer my songs from my computer, but I got really frustrated and confused. Certain songs keep being transferred through homesharing to my new library even though I already have a copy of the song in the library. I checked to see if I had the actual file in my media folder and it was there, so why do the songs keep being copied? And, if possible, can someone also explain how to transfer playlists? I know Apple said to export/import playlist but what does that mean?

    Yup, same issue.
    Playlist - Right-click on the playlist and select export, it will create a .txt file.
    On the other computer File/Library/Import Playlist, select the txt.file.
    Or, just select the Playlist in homeshare and select it and hit import.
    For some reason when you select "Items not in my library" it is does not show files correctly, if you purchased it in iTunes, they show correctly, or if you loaded them, they don't.

  • Why will my iPhone and iPad not share photos even though they are connected to icloud and photo sharing

    MY IPhone and IPad will not share photos even though I have ICloud and Photo sharing on in both

    Greetings Tima56,
    It seems you are experiencing an issue with photo syncing and iCloud. The following article provides troubleshooting guidance which may help you find a solution:
    Get help using My Photo Stream - Apple Support
    This resource may help as well:
    Get help using iCloud Photo Sharing and shared albums - Apple Support
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • Disconnect between audio and video with movies

    I'm just getting started with the 80 GB iPod and a movie I loaded will play, but there is about a second or two delay between the video and the audio with the movie. Any suggestions?

    Can you mark the thread as Answered then please.
    10:13 PM Friday; January 25, 2008

  • HT5622 What do to when you buy app and it doesn't work even though you are billed.

    What to do when you buy an app and it doesn't work after you were billed

    Start a ticket here: http://expresslane.apple.com
    Go to iTunes, iTunes Store.

  • Music videos do not play even though they are on my ipod

    I purchased the music videos directly on itunes, then imported them into my ipod. They dont play either the music or the video. It also seems the ipod temporarily stops responding while its trying to play (cant adjust volume, or go back to the menu)

    i also have the same problem.. when you find out the answer to this could you please email me? [email protected] thanks
    <3 TiMETODANCE
    <div class="jive-quote">I purchased the music videos directly on itunes, then
    imported them into my ipod. They dont play either
    the music or the video. It also seems the ipod
    temporarily stops responding while its trying to play
    (cant adjust volume, or go back to the menu)

  • I have setup iCloud on my PC (running Windows 7 64-bit) but when I attempt to setup my iPhone 3GS and iPad, both running 5.0.1, I receive an incorrect user name and/or password error message even though they are the correct ones.

    After receiving the error message, the iPhone locks up while the message " veriffying" is displayed.

    Look here.
    http://support.apple.com/kb/index?page=answerlink&url=http%3A%2F%2Fsupport.apple .com%2Fkb%2FHT1495&answerid=16777216&src=support_site.home.search

  • Audio and video clip lengths differ in encore timeline

    Hi
    I have been working to build a BD-R H.263 ac3 disk.  I used AME from within Premiere Pro to export the M4V and (at the same time) AC3, using the present defualt parameters-no tweaking of any setting.  The clips appear to play great on encore's monitor--everything in sync.And on the burned BD-R
    However, I am getting the black screen between clips in the timeline when played in the standalone BD player, or (when I had one clip to a timeline) in a playlist.  a previous poster made note of different length audio and video clips.  I zoomed on the timeline and lo and behold--the  the audio and video clips are different lengths.
    This is with the timeline fully expand--each division is a frame. Note that break between the two audio clips is offset from the break between the two video clips by two frames.  This offset is after several clips.  I could find no information on what the one frame crosshatching at the end of the leading clips means.  Can anyone explain this cross hatching?  What do I do about it?  the image below is after the first clip in the timeline:
    In this image, the offset is less than a full frame??????
    I tried using the trim tools to bring these together-but, the trim tool only lets it jump a full frame and then only to a GOP boundary, which doesn't help because the boundaries are obviously different fro the video and audio track.
    I want to emphasize that these assets were created from the Premiere CS4 timeline (which had no offset between audio and video) using the default H.263 and AC3 presets in AME and the same presets selected in Encore.
    The offsets do not appear to cause the actual audio and video to go out of sync when I play the burned disk. But, I get the 1-2 second wait between menus and chapters, or with items in a playlist.
    The audio offset suggests that the player may not know what to do when faced with a chapter point that is different on the audio and video tracks, although, I will note that encore snapped to the joints in the video track not the audio track.
    You can see from this listing that several of the clips audio and video lengths that differ by one frame.  By the end of the timeline, the cummulative offset is 3 seconds (48 minute timeline)
    Can anyone shed any light on this?  Thanks

    I don't think that I had the same problem that you do, but I thought I'd throw in my two cents just in case it might help. Encore would not build the output; it said something like the inpoint and the length did not match the endpoint. Actually, I think this happened in several different situations. In one case I simply adjusted the audio and video tracks to match endpoints. In the other case I went back to Premier and found that in some cases where I had added transitions it had shifted the endpoints of the audio and video tracks so they did not match. I removed the transitions. It didn't matter that much to me since I'm doing this for personal use. Is it possible those crosshatched lines you're seeing are transitions?
    I am using CS 3 and editing HD. I have had many problems with encore. I read in the form someplace that it had a hard time handling H.264 so I changed to MPEG-2 and that fixed one problem. In another case it couldn't find some files and I found some advice not to use HD or wide menus, so I switched to standard 4:3 menus and it worked.

  • 1080i60 video captured file  has 3-13 sec. time diffrence, audio and video

    capture from camera (mode HD 1080i60) to imac G5 1.8Ghz ( allocated disk space is 500G) for 4 hours audio and video has no longer syncronized, time differences are about 3 to maximum 13 second. this can be checked by quicktime, after captured.
    disk has no error
    this case is also proven apple japan technical center.
    our case only FCP runs, no other application started.
    FCP 5.1.4 os 10.4.11
    if parson in charge in apple usa, please contact to apple japan for more details.
    FCP might have serious problem on capture routine

    Thank you for your kind reply, appreciated.
    i operate two imac capture system same day for operation. specification for both system are identical.
    from your advice, i checked .mov files by QT, which captured that day.
    condition:
    both system's FCP capture operation are closed 4 times by escape key for creating files, after created file. i again start for capturing the data. and no other application are initiated, except FCP
    system A has time differences audio and video, but not always there are time it is good.
    .mov files
    format FPS sound
    file 1 apple HDV 1080i,1440x1080 29.95 16bit mono 48.000khz
    file 2 apple HDV 1080i,1440x1080 29.94 16bit mono 48.000khz
    file 3 apple HDV 1080i,1440x1080 29.95 16bit mono 48.000khz
    file 4 apple HDV 1080i,1440x1080 29.96 16bit mono 48.000khz
    system B has no difference.
    format FPS sound
    file 1 apple HDV 1080i,1440x1080 29.97 16bit mono 48.000khz
    file 2 apple HDV 1080i,1440x1080 29.97 16bit mono 48.000khz
    file 3 apple HDV 1080i,1440x1080 29.97 16bit mono 48.000khz
    file 4 apple HDV 1080i,1440x1080 29.97 16bit mono 48.000khz
    NOTE: Both system never end FCP for this operation. created files by escape key.
    connection from camera to imac are directly connected to imac's fire wire socket by fire wire cables

  • Photo Booth audio and video out of sync

    Hi everyone.
    I tried recording a video three times today on Photobooth, and every time, the audio and video are out of sync. Does anyone have any solutions as to how I can fix this? Its ever since I downloaded Mountain Lion.
    Thankyou.

    HI, Jay Rhymes,
    I'm having the same problem and took your advice.
    Strangely, the first video I recorded in Photobooth after I changed the settings did sync audio and video.
    But then I deleted that test and tried another, and it was a little off.
    I deleted that test and tried a third time, and it was way off.
    So if I close Photobooth and open it, the first video will apparently sync fine but subsequent ones won't.
    Anyone else having this strange difficulty?
    iMac mid-2010
    Mountain Lion 10.8.1

  • Audio and Video Not Synchronizing in the Same Clip.

    Ok, So I have had Adobe Premier Pro for a while now an I love it. I just have one not so insignificant problem with it. I was in the middle of making a video (with one particularly long clip in it) and I noticed something that began to happen in the beginning of the clip and went up until about thirty seconds. The audio and video gradually became further and further apart until they were about three seconds off. I was only using one clip so there should be no way I screwed up the placement of the files in the timeline. Viewing the clip in quicktime player does not give me that problem, so it's either a problem with Premiere Pro, or something else that I am unaware of. It has became so bad that I even downloaded iMovie so I could at least get this movie edited. I am pretty new to Premier Pro so any advice is much appreciated. Thanks!

    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • When I try to import video clips into Premier Pro 6 the audio and video aren't synced.

    When I try to import video clips into Premier Pro 6 the audio and video aren't synced. I can moved both of them around without the other.  This creates a lot more work. I have looked on forums etc but can't find the answer Can you please help.

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    -and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    https://forums.adobe.com/thread/1070933 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

  • IMovie will not import or play the clips at the proper speed and the audio and video do not match up.

    i have a samsung hd camcorder. it records at 40 fps, but iMovie will not play the clips at the proper speed and the audio and video do not match up. I have tried to record at standard quality to no avail. Help. thanks in advance.

    samsung sc-hmx10c     ntsc
    im guessing that is the speed it records at due to the fact imovie puts a blue 40 at the top left corner of every clip i import.

  • My synchronized clips (audio and video) have lost their compound clip icon after I bought the full version of FCP X, why is that?

    I have noticed a few changes to my FCP workflow after installing FCPX from the trial version I had before. I've noticed that when I sync audio and video files together via Clip > Synchronize Clips.. the icon at the top left corner of the thumnail is no longer there as it was in the trial version. I also have to right click and select 'open in timeline' to work on the files. I much preferred clicking on the thumnail's icon in the event library and it opening up in the timeline. Also Stabilization is missing from my video effects! How odd.

    I no longer have the trial version this is the point. Bought the 'release' version about 6 weeks ago. Still doesn't explain why the stabilization option randomly appears for some clips and not for others. Also would like to know if I can get the compound icon back on the thumbnails for synchonized clips.

  • How to synchronize multiple, unorganized audio- and video clips

    I'm editing a video with audio recorded by an external recorder.
    I've been given a lot of unorganized files and I wonder if there's a quick way to synchronize them all without knowing which audio- and video file that fit together.

    I've been pretty amazed by how well the synchronize clips command works. You might take a chance and select all of your audio/video files at once, right click and choose Synchronize Clips.

Maybe you are looking for