Linking control of the effects timeline with the sequence timeline

This should be simple but I can't work out how to do it. Either Premiere CC lacks this obvious feature or I'm an idiot (don't answer that)...
So here I am, editing some effects - let us for example say I want to stick in a very fast audio fade-out and fade-in to mask out some noise. I want to zoom in close on the effects timeline so that I can finely adjust the exact position of the keyframes.
The zoom slider on the effects window is fiddly and doesn't automatically centre on the frame currently selected in the sequence, so keeping track of it and finding it once zoomed in is really difficult. Zoom control on the sequence timeline doesn't present these problems.
SO, as I'm sure there is a good reason why my effects timeline and sequence timeline are not normally linked is there a way of forcing this so that when I zoom the sequence the clip (if selected) in the timeline?
Am I making any sense?
All advice (other than 'Have you tried turning it off and on again?') gratefully received.
Howie

Because Premier allows you to look select clips for review in the Effect editor that may not be at the location of the cursor on the main sequence timeline I can see why it wouldn't be helpful for the two timelines to be synchronised by default but it would be useful if it could be enabled for those of us who like working that way. I am forever adding effects to the wrong clip.
My biggest problem is that with some clips, when I try to zoom in on the effect timeline I cannot get it to zoom in completely to give me the ability to move keyframes a frame at a time easily. Sometimes it'll let me zoom in to the max, other times it won't... it's very frustrating.
I admitted defeat earlier and asked one of the online advisers to look at it for me. They couldn't make it work on some projects either.
Oh well.

Similar Messages

MFX Files not linking issues in the sequence using Premiere CC Pro

We are using Panasonic P-2 cards and the Infocus to capture video as MFX files. This creates a series of files which are linked via an XML file. In Premiere 6 and earlier, these files were linked (approx. 2 min. of video each) as one stream - only one of the files were necessary to use within the program. Using Premiere CC, this feature does not seem to work as before. Are we missing something in the settings, or does this version not support MFX files as before?

It's not normal on Windows.

When I go to a link all is fine except the link takes up the entire screen and there is no way to move out other than control alternate delete and brining up task manager to exit out of firefox, help

again, I am able to use search of firefox to get to a link but then all the tool bars from my operating system are no longer available as the link takes up the entire screen (there are no firefox toolbards either so I can't shrink the page etc).. Thus I cannot move around and am stuck with no option but control alt delete to get to task manager to close firefox.

Thank you so much...
1. I don't have that fat format I checked as I saw this on another answer...BUT...you are right the project was very bloated and I made a new project with the sequence and moved a bunch of projects off to an outside drive and things are flying again...this effect "twirl" was on three clips and this seemed to be creating a problem along with it being a bloated project. Don't know why this effect renders easily then the next second doesn't it's on three clips on the entire project and one or another might not render all of a sudden.
2. I understand what you said about the timeline export...I decided to export the sequence without the matte it was nested in and that sequence did have the chapter markers on the timeline and they again didn't export??? I'll look tomorrow at this it makes no sense if what you're saying is how to do it...the final cut pro book said they should have showed up if I export from the browser and that didn't work either.
3. I then matted that output and rendered it to output but I am worried this will degrade and compress the sequence more than I want by outputting the same sequence with current settings twice???...the couple of outputs I could make nested looked very good as this was one render...however, I tried doing a quicktime "current settings" with the dvd studio pro info still trying to export chapter markers and maybe it's my imagination but the output didn't look as sharp as just an output with just chapter markers???
r. I did look at the final cut pro book and it says that mpeg 2 movies will not read chapter markers anyway if you create one in compressor...if this is true it makes no difference if the quicktime output isn't having chapter markers show up. I assume when I go to author though I can put an mpeg 2 movie into dvd studio pro and create chapter markers at that point!! It seems weird it says it can do it with an mpeg 1 but not an mpeg 2 when everyone is using that for dvds.

Servlet not forwarding a control to the jsp with req dspher

hi ppl,my servlet code is supposed to forward a control to a jsp page so as to display the value in the jsp.but the request dispatcher's forward is not forwarding the control to the jsp page.....here is my servlet code----
// Decompiled by DJ v3.4.4.74 Copyright 2003 Atanas Neshkov Date: 7/4/2003 12:37:00 PM
// Home Page : http://members.fortunecity.com/neshkov/dj.html - Check often for new version!
// Decompiler options: packimports(3)
// Source File Name: BdgtMaster.java
package publicity;
import java.io.*;
import java.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class BdgtMaster extends HttpServlet
 public synchronized void service(HttpServletRequest httpservletrequest, HttpServletResponse httpservletresponse)
 throws ServletException, IOException
 Object obj = null;
 String s3 = "";
 String s4 = "";
 out = httpservletresponse.getOutputStream();
 String s = "";
 String s1 = "";
 String s2 = httpservletrequest.getParameter("option");
 s3 = httpservletrequest.getParameter("branch");
 s4 = httpservletrequest.getParameter("publicity_code");
 String s5 = httpservletrequest.getParameter("budget");
 try
 String s6 = "0";
 String s7 = "0";
 String s8 = "INSERT INTO Budget_Master(Branch,Publicity_Code,Budget_Alloted,Work_In_Progress,Amount_Paid) VALUES (?,?,?,?,?)";
 String s9 = "update budget_master set old_budget = budget_alloted where branch='" + s3 + "' and publicity_code=" + s4;
 String s10 = "UPDATE Budget_Master set budget_alloted=" + s5 + " where Branch='" + s3 + "' and publicity_code=" + s4;
 datasource = "jdbc:odbc:budget";
 con = DriverManager.getConnection(datasource);
 int i = con.getTransactionIsolation();
 con.setTransactionIsolation(2);
 con.setAutoCommit(false);
 if("new".equalsIgnoreCase(s2))
 PreparedStatement preparedstatement = con.prepareStatement(s8);
 preparedstatement.setString(1, s3);
 preparedstatement.setString(2, s4);
 preparedstatement.setString(3, s5);
 preparedstatement.setString(4, s7);
 preparedstatement.setString(5, s6);
 preparedstatement.executeUpdate();
 con.commit();
 preparedstatement.close();
 if("update".equalsIgnoreCase(s2))
 Statement statement = con.createStatement();
 statement.executeUpdate(s9);
 statement.executeUpdate(s10);
 con.commit();
 con.setTransactionIsolation(0);
 /*htmlStart(out, "BUDGET MASTER");
 out.println(" <div align=\"left\">");
 out.println("<table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" width=\"50%\">");
 out.print("<tr>");
 out.println("<td width=\"50%\">Branch </td>");
 out.println("<td width=\"50%\">" + s3 + "</td></tr><tr>");
 out.println("<td width=\"50%\">Budget Alloted </td>");
 out.println("<td width=\"50%\">" + s5 + "</td></tr><tr>");
 out.println("<td width=\"50%\">Publicity Code</td>");
 out.println("<td width=\"50%\">" + s4 + "</td></tr></table></div>");
 htmlEnd(out);
 con.close();
 httpservletrequest.getRequestDispatcher("/pages/serview/BdgM.jsp").forward(httpservletrequest,httpservletresponse);
 catch(SQLException sqlexception)
 cleanUp();
 printSQLException(sqlexception, out);
 out.flush();
 public void init(ServletConfig servletconfig)
 throws ServletException
 super.init(servletconfig);
 try
 Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
 return;
 catch(ClassNotFoundException classnotfoundexception)
 log("Couldn't load class sun.jdbc.odbc.JdbcOdbcDriver");
 throw new ServletException(classnotfoundexception.getMessage());
 static void printSQLException(SQLException sqlexception, ServletOutputStream servletoutputstream)
 throws IOException
 servletoutputstream.print("SQLException\n\n\n");
 for(; sqlexception != null; sqlexception = sqlexception.getNextException())
 servletoutputstream.print("SQLState: " + sqlexception.getSQLState() + " \n");
 servletoutputstream.print("Message: " + sqlexception.getMessage() + " \n");
 servletoutputstream.print("Vendor: " + sqlexception.getErrorCode() + " \n");
 private static boolean checkForWarning(SQLWarning sqlwarning)
 throws SQLException
 boolean flag = false;
 if(sqlwarning != null)
 System.out.println("\n *** Warning ***\n");
 flag = true;
 for(; sqlwarning != null; sqlwarning = sqlwarning.getNextWarning())
 System.out.println("SQLState: " + sqlwarning.getSQLState());
 System.out.println("Message: " + sqlwarning.getMessage());
 System.out.println("Vendor: " + sqlwarning.getErrorCode());
 System.out.println("");
 return flag;
 /*void htmlStart(ServletOutputStream servletoutputstream, String s)
 throws IOException
 servletoutputstream.println("<html><head><title>" + s + "</title></head>");
 servletoutputstream.println("<body topmargin=\"0\" leftmargin=\"0\" bgproperties=\"fixed\">");
 servletoutputstream.println("<div align=\"left\"><table border=\"0\" width=\"100%\">");
 servletoutputstream.println("<tr><td width=\"100%\" bgcolor=\"#DFDFFF\">");
 servletoutputstream.println("B u d g e t M a s t e r - D e t a i l s E n t e r e d</td>");
 servletoutputstream.println("</tr></table>");
 void htmlEnd(ServletOutputStream servletoutputstream)
 throws IOException
 servletoutputstream.print("<hr>");
 servletoutputstream.print("</body></html>\n");
 String link(String s, String s1)
 return "<a href=\"" + s + "\">" + s1 + "</a>";
 public String getServletInfo()
 return "Display and SQL manipulate JDBC databases on the server.";
 public void cleanUp()
 throws IOException
 if(con != null)
 try
 out.print("Closing database connection");
 con.setTransactionIsolation(0);
 con.close();
 return;
 catch(SQLException _ex)
 return;
 else
 return;
 public BdgtMaster()
 private Connection con;
 private String datasource;
 private String user;
 private String password;
 private String base;
 private ServletOutputStream out;
plz tell me where im wrong...
regards....a_joseph

Hi,
Sorry to say this but it'd be lot simple if we can avoid cross posting similar Queries.
I'd appriciate if you can continue using with your post
http://forum.java.sun.com/thread.jspa?threadID=5208928
Hope there are no hard issues on this.
REGARDS,
RaHuL

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!

Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When i click on a hiper link, i get the following response: firefox doesn't know how to open this adress, because the protocol (blockedhttp) isn't associated with any program.

when i click on a hyper-link, i get the following response: firefox doesn't know how to open this address, because the protocol (blockedhttp) isn't associated with any program.
My question is: how do i get this hyper-link to open?

You have blocking software to change the url to prefix blocked to the url to get '''blockedhttp:''' to prevent you from opening the file. It might be the "Blocksite" extension, but I just typed in something I blocked into the location bar and I didn't see that happen. but that might not be the same as clicking on a link.
* http://kb.mozillazine.org/Blocking_bad_sites_and_annoyances
Maybe it's from the blocked sites list used by Firefox and other browsers maintained at google, or a parental controls application.

How do I fix and error message telling me Firefox can't connect to a viable site I've not had issues with in the past (via links sent from the site)?

This is the message I receive when I attempt to use links within email messages sent to me by a specific number of vendors: "Firefox can't establish a connection to the server at vogueknitting.us2.list-manage1.com."
I started getting this message when I tried to use links sent to me via one specific vendor, "Little Knits". I've tried to update plugins and other vulnerabilities FireFox/Mozilla identified and now I'm getting the message when I attempt links from other website email messages with links such as the Vogue Knitting website. I have a feeling the issue is somehow linked to Mozilla and some blocking features. Could you please help.
I'm using my laptop PC at home, Windows 7, everything appears to be "updated", Time Warner Internet provider......

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
https://support.mozilla.org/kb/Server+not+found
https://support.mozilla.org/kb/Firewalls

Is there a way to select MULTIPLE tabs and then copy ALL of the the URLs and titles/or URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; However, I prefer to use a Firefox feature rather than download an add on. Thanks.

Currently, I can copy ONE tab's url and nothing else (not its name). Or I can bookmark all tabs that are open. However, I'd like to have the ability to select multiple tabs and then copy ALL of the the URLs AND their titles/or copy ALL of the URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; when I download the add on, I get a message saying that using the add on will disable Firefox's tab features. I prefer to use Firefox features rather than download and use an add on. Is there a way to do this without an add on?

Hi LRagsdale517,
You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
Please let us know how it goes.
Best,
Sara

HT5622 When trying to log on to I-Cloud with my Apple Id, I keep getting the message that this is a valid Apple Id but not an I-cloud account???How do I link my I-Tunes Apple Id with I-Cloud?

When trying to log on to I-Cloud with my Apple Id, I keep getting the message that this is a valid Apple Id but not an I-cloud account???How do I link my I-Tunes Apple Id with I-Cloud?

You are logging in iCloud for the first time. In this case, first you need to log in iCloud on an iPhone, iPad, iPod touch or Mac. See > http://www.apple.com/icloud/setup
If you have not got a device to set iCloud up, you cannot use it. You can only use iCloud on your PC if you have got an Apple device

I have two iTunes accounts. When I view account info on a older account that I seldom use. It indicated that it was associated with one device;I.e., my IPad. Ian trying to link it to the other account instead

I have two iTunes accounts. When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad. I am trying to link it to the other account instead

johnfromnorth andover wrote:
I have two iTunes accounts
Why?
When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad. I am trying to link it to the other account instead
You want to uise the newer account with the iPad?
Settings > Store.
Tap account, sign out then sign in with the account you want.

HT5622 Have Family Mobile with 2 phones and only one Apple ID can all be controlled by the main phone?

Have Family Mobile with 2 phones and only one Apple ID can all be controlled by the main phone?

angiefromaustin wrote:
Yes I know the password for Apple ID.
Then there should be no issue for you.
angiefromaustin wrote:
I do not know the password to get onto the 3G phone to make changes or update apps etc.
Then there is more than one Apple ID involved.... Or a Restrictions Passcode has been set.
angiefromaustin wrote:
2 phones and only one Apple ID
Then what do you mean by this ?

When I click on a link in an email, it does not automatically open the site page? When I receive an email with a link in it, if I click on the link to open the page, nothing happens. It does not open the internet to that page.

When I click on a link in an email, it does not automatically open the site page?
When I receive an email with a link in it, if I click on the link to open the page, nothing happens. It does not open the internet to that page.

I don't appear to have a toolbar either.

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

Good work, thanks for the report.

Picture Library : upload image with same name overwrite the image in thumbmail or WebVersion view but not the actual image link points to the old image

Hello,
I am facing a wired issue with Picture Libraries in SharePoint.
We created a custom field and added it to UserInfo list, the column based on custom field lets user upload their personal images to a Picture Library with the name <User ID>.<Image Extension> e.g. 1.jpg where UserID is internal Listitem ID of the UserInfo list and set its URL to the field value which we use to display the image on our custom user profile and some other WebParts.
If the user uploads a different image, it will overwrite the existing one it keeping the same name.
The field worked perfectly with sites using widows Based authentication, but as we move the field to sites with form based authentication we find that the field is able to upload the image properly first time but on each successive upload, although a new image gets uploaded with the name userid.imagextension and is shown in the allitems.aspx page in the thumbnail view and in the picture preview on the dispform.aspx page, but the link next to the name field and the image shown on clicking the preview points to the old image.
To put it other way
https://<Web URL>/Picture%20Library/_w/Upload_jpg.jpg
https://<Web Url>/Picture%20Library/_t/Upload_jpg.jpg
Would show the updated image
but the actual URL
https://<Web Url>/Picture%20Library/Upload.jpg
points to the old image
what’s even more strange is that even after deleting the image the url still shows the old image at
https://<Web Url>/Picture%20Library/Upload.jpg
I confirmed the same by actually repeating the same exercise on a picture Library in the User Interface
Uploading an image say upload.jpeg in the picture library using SharePoint interface.
Then uploading a different jpeg image keeping the same name upload.jpeg again in the picture library.
In allitems.aspx thumbnail view and on dispform.aspx page preview filed image now show the newly uploaded image but when you click the preview image or click the link in the name field value it takes you back to the old image.
I have seen this issue on environment where we have enabled form based authentication and the issue is not seen on another server where we have wss with windows based authentication.
Has anyone noticed such behavior and is there any workaround to that!
Thanks & Regards
Saurabh Rustagi

All,
I had the same issue.
In my case, Blob Cache was enabled for the web application in which the image issue was occuring.
I cleared blob cache, and after doing a hard refresh of my browser, the correct image was then displayed.
To clear blob cache, do the following:
Navigate to:
http://yourwebapp:port/yoursite/_layouts/objectcachesettings.aspx
Select: "Object Cache Flush" and "Force all servers in the farm to flush their object cache" check boxes
Click the OK button
Hope this helps.

Linking control of the effects timeline with the sequence timeline

Similar Messages

Maybe you are looking for