Linking devices that use seperate routers with 2 seperate dsl lines.

Basically at home i have a setup like this using two different dsl lines.
DSL-Line1 > Wireless Router/Modem1 > laptops/games consoles using it.
DSL-Line2 > Wired Router/Modem > wired pc's/file server.
Basically i'm wondering if i replace the wired router/modem with something like a wag320n is there a way to link the two wireless networks together so the games consoles/laptops can get access to the pc's/file servers, but have them still using the seperate dsl lines?,
ie being able to see each other but still using dsl-line1 internet access for the games consoles etc, and the pc/fileservers using dsl line 2.
Thanks

You can connect both routers with an ethernet cable. Example setup:
Wireless router: LAN IP 192.168.1.1/255.255.255.0. DHCP server enabled for 192.168.1.100-149.
Wired router: LAN IP 192.168.1.2/255.255.255.0. DHCP server disabled.
Everything which is supposed to go through the wired router must have a static IP address configured on the device itself. You configure an IP address, e.g. 192.168.1.200, subnet mask 255.255.255.0, gateway 192.168.1.2 and dns 192.168.1.2. Now that computer will use the wired router as internet gateway.
All devices which still use DHCP to obtain an IP address will connect through the wireless router to the internet.
Inside your LAN you have full connectivity.

Similar Messages

What is Windows 10's effect on devices that use WIMboot?

I have an HP Stream that uses the WIMboot feature to reduce space taken by the operating system. I'm curious if anyone else has tried Windows 10 with a device that uses WIMboot, and any effect it might have on the images stored on the device.

Hi Entegy,
Due to the resource limitation, I cannot test such feature, but you can refer to this youtube video:
Windows 10 Preview Ent with WIMBoot
https://www.youtube.com/watch?v=HEME0nAP1RU
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
In my personal opinion, wimboot is the same feature with Windows 8.1 Update 1.
Alex Zhao
TechNet Community Support

List of SAP Certified Handled devices that use windows CE ( Latest Version

Hi ,
Can anyone let me know the List of SAP Certified Handled devices that use windows CE ( Latest Version )
This is very urgent
Regards
Abhilash

Hi,
If you are looking to run mobile applications on a PDA with windows mobile 5.0 latest version, then i would request you to check the product availability matrix for the respective mobile client. Like it depends on the client framework because mobile client framework is one thing you need to check upon.
For eg. if you are using Mobile infrastructure 7.0(netweaver 2004s) or mobile infrastructure 2.5(netweaver 2004) then you need to check the respective mobile client 7.0 or 2.5's product availability matrix in the supported devices section or you can even search notes for the same. So it is difficult to say a list of devices until and unless you tell your environment and the versions used.
Hope this helps.
Best Regards,
Siva.

How can I find the devices that use my Apple ID

I Need to find the devices that use my apple ID

Store > View Account. On the Account Information page, click on Manage Devices, and you will see the list.

I have a canon multifunction printer that used to work with snow leopard but since I updated to mountain lion my printer stop working, How do I make it work again?

I have a canon multifunction printer that used to work with snow leopard but since I updated to mountain lion it stoped working. How do I make it work again?

This problem is not unheard of when upgrading from Snow Leopard. It is usually solved by completely deleting the existing printer in System Preferences > Print & Scan, and adding it again.

TS4083 Is there a way to have my Icloud delete my emails on all apple devices that use I cloud? If I delete them on my Iphone, they do not delete on my Ipad and vice versa

I cant figure out how to set up Icloud to delete my emails on all my apple devices that use icloud. Any help would be greatly appreciated.

I frequently have emails that I delete on my mac but are not deleted from the iPhone/iPad (this is for an iCloud account, @mac.com). In time they eventually delete, but it can take time. I usuall delete them from the devices as well.

I have songs that show up on my device, that come up grey with the dashed circle, and cannot be deleted.

I have songs that show up on my daughter's device, that come up grey with the dashed circle, and cannot be deleted.
I have tried:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Manage Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
This has not helped.
All music is off the ipod.
When I connect to the computer to sync I still have songs that come up grey with the dashed circle.

If they were deleted from the computer and iTunes, the only way to listen to them again would be to insert the CD and listen to them from the CD or rip them from the CD again.

Deploying the SCCM 2012 Client to WES 7 devices that are locked down with the FBWF using 2007 task sequence via WEDM.

I'm wondering how people are migrating their embedded devices that are using the FBWF. I've done some googling and it seems like most people are just re-imaging the devices and after migrating a single device i see why. Its not a pretty process. This will
be a long description but ultimately my question stems more from trying to find a better way to execute the device migration from 2007 to 2012.
Some back ground on my situation might be in order here. I'm in the process of wrapping up our 2007 to 2012 migration. We have a 2007 infrastructure that was a central server with 2 primaries and 286 secondary site servers. I've consolidated that to a single
2012 primary site server that hosts all the main roles. There are 2 more servers in the data centers both operating solely as push distribution points I'll refer to them as 2012 01 02 and 03. I'm over half way through the migration and so far haven't needed
to offload any site roles. There are almost 10,000 clients now reporting to the 2012 site server and almost a 100 field servers pulling content from 2012 02 as their source dp as pull dp is the only way forward for this many devices. I've read the horror stories
of trying spin up 200 plus push dps. We are running PKI. I'm at the point now where i need to start migrating the Windows Embedded Seven Standard clients that have the 2007 sccm client on them with WEDM for write filter handling.
What i'm wondering is if anyone has any pointers for me regarding migrating the WES 7 devices. My plan that i've come up with is to somehow script the process using a 2007 WEDM Task Sequence to try and migrate them over to 2012. Things are complicated as
I need to somehow script the install, the policy checkin, hardware inventory, software inventory, and validate the SCEP client installs before I reboot the device one last time to enable the FBWF. How I handled the SCCM 2007 client install on these devices
when they were provisioned was to just create a batch file that would sleep for ten minutes then check to see if the inventoryagent.log file had been created yet. I realize now that is inefficient as i can kick off the inventory using a WMI method once the
client has installed. Also I need to make sure the machine gets its first policy as that is how it creates the communication using PKI through that first policy transfer and that also finalizes the client install. The biggest piece i'm uncertain about in this
regard is the SCEP client.
I had to change the SCEP client install from yes to no in the default client settings as we have some Mcaffee servers that can't have the SCEP client on them. I have incremental updates enabled on the collection that has the policy that installs the SCEP
client but this will take an unknown amount of time unless i force the environment to update as the device starts in 2012 install, or if I could kick off the SCEP isntall... IDK. I'm also wondering if i should keep the device in the migration process until
i validate it has its proper scep policy applied which I believe can be validated by a registry key somewhere.
Once the 2012 client gets installed will that cause it to lose its place within the 2007 Task Sequence? Considering its going to take a minimum of 2 reboots I'd normally use the task sequence to handle its progression through the process.
I'm also considering trying to use an Orchestrator runbook, as that would be a good way to keep track of the migration process as each device migrates. Especially since this might take several seperate scripts.
I'm going to take a stab at scripting the migration process, but if anyone has any pointers that might make this a less complicated I'd really appreciate it as I've got about 3000 of these devices that need to be migrated over. The other things i've learned
the hard way is any time you have something this complicated over the course of 3000 devices you will run into unknowns and the failure rate increases. I'm in the precarious position of having to not only build this process out but in some situations have
it complete in the shortest amount of time possible as we have sites running 24x7. I know the end users behavior all to well and they will just keep hitting the power button sometimes even though their not supposed to so they can get their device functional
again. In those situations i'd end up, if i'm lucky with a device that no longer has a healthy SCCM client in either environment and the write filter disabled.
So like i said any pointers anyone could throw my way i'd really appreciate. I manually went through the migration process on a single device for proof of concept and ended up with almost 2 pages of pseudo code for my migration script/scripts.
Thanks,
-K.R.

Hi,
In R2 there are some new variables you can use to solve this,
http://ccmexec.com/2014/12/smstsmplistrequesttimeout-value-in-milliseconds/
In Sp1 though adding a step to sleep for 2-5 minuter after reboot and before the application install step is a common workaround.. a powershell command with "Start-Sleep
-s 120" should do it.
/Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Links that used to work with pre Firefox v4.0 no longer work

I need access to a work related website. the main page of the website opens up with out any issues, but when I click on any of the links nothing happens. This is a new issue that only started once I upgraded to Firefox 4.0. I previously had no issues using this website with Firefox before. I tried using the website with Explorer and had no issues.

I have iPhone software 2.2.1 (SH11),
MAC 0S X 10.5.5
XCode 3.1.2
In organiser it says The Developer Disk Image could not be mounted.
Xcode could not find an appropriate Developer Disk Image to mount on Richard’s iPhone. Please contact Apple for the 2.2.1 (5H11) device support package.
Also in Xcode it says that the active sdk is Device - 2.2. There is no version 2.2.1 for me to select and I cannot add a new active SDK.
I have downloaded the iphonesdk_for_iphone_os2.2.19m2621afinal.dmg and tried installing it which had no effect to the error above.
I tried uninstalling Xcode then re-installing using this sdk but again no effect
I tried installing the iPhoneSDK_2.2 on its own but again no effect
I tried restoring the iPhone but again no effect
I've tried the above numerous times, restarting xcode and restating the complete system but still to no effect.
I am relatively new to MACs so I might be doing something wrong (ie not installing or uninstalling properly) but I am really lost now as to what to do.
Please advise.
Thanks
Richard

Communicting with a device that uses the K-Net protocol

I have HPLC pump that was built in Germany. The K-Net protocol is used to communicate with the device serially (RS232). Does anyone have any experience/ insight about how to do this. Is there any VI's that will convert ascii commands to this K-Net protocol?? Thanks.
ssmith

Hey ssmith,
Thank you for contacting National Instruments. If you know the commands you will be using to interact with the pump, you can use VISA commands in LabVIEW to handle the communication.
If you do not have the VISA driver installed, you can find that here: NI-VISA 4.2
Also, you might try searching our Instrument Driver Network, as there could be a driver already developed for your pump that would make things easy for you.
Regards,
Kevin H
National Instruments
WSN/Wireless DAQ Product Support Engineer

Can I have one itunes account, but have two devices that used different email accounts?

I have an iPad2 and want to buy an iPod Touch for my daughter. I want it to use her email address, but use my itunes account. Can that be done?

The Apple/iTunes ID (which is a email address) is seperate from any mail accounts yu have on the iPod/iPad. Both devices can use the same Apple/iTunes ID but have different email address for the mail accounts on the devices.

Adapting custom driver for a robotic device that is interfacing with an FPGA

Hi,
I have a custom driver for a robotic device that I'd like to interface with an FPGA that is reading the digital encoder signals. I am a novice at programing driver files so any help would be much appreciated.
Thanks!

Hey Xaq,
Well we had some other side projects to work on, and I'm no back working with the Windows/FPGA interface. I have one VI that is able to determine the relative position of the PHANTOM device. We're doing this by using 3 loops (one for each motor), running in parallel. So from LabView I have the x,y,z location of the device. As a first pass I want to build a dll that allows my C program to query to position at any time.
A couple problems here:
We probably need to break up the vi into several sub vi's, but I'm not sure where to start. Should the contents of each loop be placed into its own file?
Also we've just upgraded to 8.2, and I'm noticing the method for building dll's has changed significantly. I was not involved with the conversion process, and I'm a bit confused about the tree structure. Under My Computer we have the FPGA target (this comes from our original *.lep project). If I go to Build Specifications here, the only option is to create a new Source Distribution. If I go back up a level to My Computer, the Build Specifications allows me to build a shared library, but now I can't find the vi listed for the FPGA target.
Please let me know what I should do next. Thanks!
--Neel

How to deploy a J2ME app in actual device that uses RMS?

Hi,
Apologies if the post is in the wrong place.
I have a MIDlet suite that uses RMS. The application would use certain data that comes from those .db files. The cliche is that the data should pre-exist in a .db file (I enter the data in the .db file through a separate MIDlet and close the RecordStore) prior to running the application for the first time in the device. Now I cannot understand how should I ship the .db file along with the .jar. Should I bundle it with the jar? And is there any device specific implementations?
Thanks in advance.
Regards,
Kalyan

Thank you for your answer, I am now creating the record store within the startApp() of my MIDlet. would you please read the following article
at
http://www.javaworld.com/javaworld/jw-05-2005/jw-0502-midp_p.html
Can you please explain which data files are they talking about?

What is the maximum number of devices that can be connected with FaceTime?

I have tried to find in theh Apple web pages the maximum number of devices that one can connect to with FaceTime. Specifically, how many iPad2 or iPad (new) devices can connect to each other with FaceTime? What about an older iMac running Mountain Lion with iPads? Or, iPhone4s and iPads? Thanks for any information you can provide.

I don't know of any limit, as long as each device has its own individual identification ( e-mail address, or phone number for iphones)

How to use 8600 fax with a digital phone line?

Has anyone had any luck with setting up the HP Officejet Pro 8600 with a digital Phone line? I do not have an analog phone and of course that information was never brought to my attention when i bought the printer. I am a bit amazed that it does not work with both analog and digital.

Hi mboddeti, Here is a different link to the document.http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02891758&cc=us&dlc=en&lc=en If it still does not work, go to HP.com and search for c02891758 and it will find that document. Error codes are different though. The voice over IP line still could be the issue, but it is possible that something else is occuring.The document has instructions on how to test your fax setup with the HP faxback service. If it works with the test fax, it could be an issue with that particular receiving fax.

Linking devices that use seperate routers with 2 seperate dsl lines.

Similar Messages

Maybe you are looking for