Linking Documaker Studio to database (SQL server 2005)

Hi,
How can we link DAP 11.5 to my database and do a check-in and check-out of forms ?

813614 wrote:
Hi,
How can we link DAP 11.5 to my database and do a check-in and check-out of forms ?See page 331 of the Documaker Studio user guide. You may not be using Studio with 11.5, but the INI options are listed in this document. Here's a link to the document itself.
http://download.oracle.com/docs/cd/E16256_01/dmstudioguide.pdf
Enjoy!
Andy

Similar Messages

Database sql server 2005 instalation problem.

Dear sir/mam,
I have installed sql server 2005 (server) and on another computer installed client. It installed successfully but on client side it does not seen, from where should i start it. so please send me procedure to install sql server 2005 on both side(client and server).

Rajsarawat wrote:
Dear sir/mam,
I have installed sql server 2005 (server) and on another computer installed client. It installed successfully but on client side it does not seen, from where should i start it. so please send me procedure to install sql server 2005 on both side(client and server).You have to turn on network (external to your computer) access.
Under programs->sql server look for "surface"

Siebel database migration from Sql Server 2005 to Oracle 11g RAC.

Hi,
We would like to migrate our Siebel database from Sql Server 2005 to Oracle 11g RAC. Can you suggest the best way to do that ?
The current configurations are:
Application : Siebel
database : SQL Server 2005
The hardware can be changed if needed. Can you please suggest the best approach ?
Thanks,
Naveen.
Edited by: Naveen Kumar C on Mar 18, 2011 9:10 PM
Edited by: Naveen Kumar C on Mar 18, 2011 11:44 PM

Hi Naveen,
We would like to migrate our Siebel database from Sql Server 2005 to Oracle 11g RAC. Can you suggest the best way to do that ?You will need much more which suggestions.
You will need a Siebel professional which has done this type of migration. Migrating the Database is not a task so hard, after migrating your environment should be functional and healthy it is usually the task problematic.
The hardware can be changed if needed. Can you please suggest the best approach ?We can recommend the minimum recommended, but this documentation already does, you need to do a analysis on your environment and ask a vendor Siebel tell the which is recommended for you and how to find the best "number" for you, in your case is very hard because everything changes.
Check this Step-by-Step
Migrating a Microsoft SQL Server Database to Oracle Database 11g
http://st-curriculum.oracle.com/obe/db/hol08/sqldev_migration/mssqlserver/migrate_microsoft_sqlserver_otn.htm
Regards,
Levi Pereira

OWB 11.0.0.7 and SQL SERver 2005

We did search quite a bit but couldnt get this working...
We are using OWB 11.1.0.7 64bit on Windows 2003 Server 64bit R2
We have to pull data from a SQl Server database – SQL SERVER 2005 64 bit on Windows 2008 R2 64 bit
WE followed the procedures given in Oracle documentation –
1. creating a ODBC DSN connection
2. creating a init ora file for that connection
3. creating a listener
We tried with both HSODBC and DG4ODBC... We can connect to SQL server through OWB...the connection is successful but I cannot import the tables into OWB. It simply hangs forever. (in the init ora file we have put the HS_FDS_SUPPORT_STATISTICS=FALSE) We have to pull data from SQL server on an ongoing basis. However we found a workaround – we can create a remote link to the SQL server database by creating an entry in the tnsnames. However this connection is very slow – we have to pull thousands of records on daily basis. IT takes quite some time to do this. We have tried different combinations after Goodling.
Could you shed some light on this? Is it a bug in OWB 11.1 that we cannot connect to SQL Serer or are we missing something? Will it be ok if we go for 11.2?

Be wary about the differences between initialization settings for generic ODBC vs specific SQLServer gateway, they are different.
http://download.oracle.com/docs/cd/B28359_01/gateways.111/b31049/apd.htm#BABHEBCE
The installation guide has details in the SQLServer section for when the SQLServer gateway is used that you should follow (specifically under configuring SQL Server Views for Data Dictionary support - needed for importing tables definitions into OWB when you use SQLServer gateway);
http://download.oracle.com/docs/cd/B28359_01/gateways.111/b31042/toc.htm
If you have an existing database link this can be used in OWB. When importing the tables you need to be aware that if it is a SQLServer gateway you will need to configure the SQLServer instance as in the gateway doc above). Just because you can query table data does not mean the gateway is configured properly.
Cheers
David

Error 1406 while installing SQL server 2005 on windows 2003 64 bit standard

Hi Gurus,
When I am trying to install SQL SERVER 2005 on Windows Serevr 2005 i get the error code 1406
I tried using the script sql4sap.vbs. and tried to set the named instance.
please suggest
Please find the contents of the Summary.txt
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version      : Microsoft Windows Server 2003 family, Standard Edition Service Pack 2 (Build 3790)
Time            : Mon Apr 14 14:51:07 2008
Machine         : UKSAPTEST02
Product         : .NET Framework 2.0
Product Version : 2.0.50727
Install         : Failed
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST02_.NET Framework 2.0.log
Last Action     : InstallFinalize
Error String    :Could not write value to key \Software\Classes\.appref-ms
Error Number    : 1406
UKSAPTEST02 : There was an unexpected failure during the setup wizard. You may review the setup logs and/or click the help button for more information.
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.
Time            : Mon Apr 14 14:52:26 2008
List of log files:
     C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST02_Core.log
Many thanks
Sreeram
Edited by: sreeram kaki on Apr 14, 2008 6:12 PM

Hi Clas,
Thanks for the valuable suggestions,
I tried to install the database (sql server 2005) using the local admin password on another server which do not have the antivirus installed. I started the installation at 3:15 PM today and the installation is still in progerss
please see the log below from Summary.txt.
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version      : Microsoft Windows Server 2003 family, Standard Edition Service Pack 2 (Build 3790)
Time            : Tue Apr 15 15:04:28 2008
Machine         : UKSAPTEST01
Product         : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_SQLSupport_1.log
Machine         : UKSAPTEST01
Product         : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_SQLNCLI_1.log
Machine         : UKSAPTEST01
Product         : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_SqlWriter_1.log
Machine         : UKSAPTEST01
Product         : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_MSXML6_1.log
Machine         : UKSAPTEST01
Product         : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_SQLSupport_2.log
Machine         : UKSAPTEST01
Product         : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_SQLNCLI_2.log
Machine         : UKSAPTEST01
Product         : Microsoft SQL Server 2005 Books Online (English)
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_BOL_1.log
Machine         : UKSAPTEST01
Product         : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_MSXML6_2.log
Also see the last few lines of the log file
SQLSetup0001_UKSAPTEST01_SQL.log
Action start 17:10:43: Rollback_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B.
MSI (s) (C0!50) [17:10:43:815]: PROPERTY CHANGE: Deleting Rollback_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B property. Its current value is '1 0 0 Installing Local Groups 50000 SQLServer2005MSFTEUser$UKSAPTEST01$RDE NT AUTHORITY\SYSTEM '.
Action ended 17:10:43: Rollback_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B. Return value 1.
<EndFunc Name='ScheduleActionX' Return='0' GetLastError='0'>
<Func Name='ScheduleActionX'>
<Func Name='SetCAContext'>
MSI (s) (C0!50) [17:10:43:815]: PROPERTY CHANGE: Adding Do_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B property. Its value is '1 1 0 Installing Local Groups 50000 SQLServer2005MSFTEUser$UKSAPTEST01$RDE NT AUTHORITY\SYSTEM '.
MSI (s) (C0!50) [17:10:43:815]: Doing action: Do_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Action start 17:10:43: Do_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B.
MSI (s) (C0!50) [17:10:43:830]: PROPERTY CHANGE: Deleting Do_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B property. Its current value is '1 1 0 Installing Local Groups 50000 SQLServer2005MSFTEUser$UKSAPTEST01$RDE NT AUTHORITY\SYSTEM '.
Action ended 17:10:43: Do_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B. Return value 1.
<EndFunc Name='ScheduleActionX' Return='0' GetLastError='0'>
<EndFunc Name='Write_sqlGroupMember' Return='0' GetLastError='0'>
PerfTime Stop: Write_sqlGroupMember : Tue Apr 15 17:10:43 2008
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (C0:F0) [17:10:43:830]: Doing action: Write_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B
Action ended 17:10:43: Write_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B. Return value 1.
MSI (s) (C0:50) [17:10:43:830]: Invoking remote custom action. DLL: C:\WINDOWS.0\Installer\MSI1D8.tmp, Entrypoint: Write_sqlUserSecurity
Action start 17:10:43: Write_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B.
<Func Name='LaunchFunction'>
Function=Write_sqlUserSecurity
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: Write_sqlUserSecurity
PerfTime Start: Write_sqlUserSecurity : Tue Apr 15 17:10:43 2008
<Func Name='Write_sqlUserSecurity'>
<Func Name='ScheduleActionX'>
<Func Name='SetCAContext'>
MSI (s) (C0!34) [17:10:43:924]: PROPERTY CHANGE: Adding Do_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B property. Its value is '0 1 0 Setting User Security 50000 SQLServer2005SQLBrowserUser$UKSAPTEST01 SeServiceLogonRight SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeServiceLogonRight SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeBatchLogonRight SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeAssignPrimaryTokenPrivilege SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeChangeNotifyPrivilege SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeIncreaseQuotaPrivilege SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeServiceLogonRight SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeBatchLogonRight SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeAssignPrimaryTokenPrivilege SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeChangeNotifyPrivilege SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeIncreaseQuotaPrivilege SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeServiceLogonRight SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeBatchLogonRight SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeAssignPrimaryTokenPrivilege SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeChan
MSI (s) (C0!34) [17:10:43:924]: Doing action: Do_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Action start 17:10:43: Do_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B.
MSI (s) (C0!34) [17:10:43:924]: PROPERTY CHANGE: Deleting Do_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B property. Its current value is '0 1 0 Setting User Security 50000 SQLServer2005SQLBrowserUser$UKSAPTEST01 SeServiceLogonRight SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeServiceLogonRight SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeBatchLogonRight SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeAssignPrimaryTokenPrivilege SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeChangeNotifyPrivilege SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeIncreaseQuotaPrivilege SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeServiceLogonRight SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeBatchLogonRight SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeAssignPrimaryTokenPrivilege SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeChangeNotifyPrivilege SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeIncreaseQuotaPrivilege SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeServiceLogonRight SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeBatchLogonRight SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeAssignPrimaryTokenPrivilege SQLServer2005MSFTEUser$UKSAPTEST01$
Action ended 17:10:43: Do_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B. Return value 1.
<EndFunc Name='ScheduleActionX' Return='0' GetLastError='0'>
<EndFunc Name='Write_sqlUserSecurity' Return='0' GetLastError='0'>
PerfTime Stop: Write_sqlUserSecurity : Tue Apr 15 17:10:43 2008
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (C0:F0) [17:10:43:940]: Doing action: Write_sqlFileSDDL.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B
Action ended 17:10:43: Write_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B. Return value 1.
MSI (s) (C0:10) [17:10:43:940]: Invoking remote custom action. DLL: C:\WINDOWS.0\Installer\MSI1D9.tmp, Entrypoint: Write_sqlFileSDDL
Action start 17:10:43: Write_sqlFileSDDL.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B.
<Func Name='LaunchFunction'>
Function=Write_sqlFileSDDL
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: Write_sqlFileSDDL
PerfTime Start: Write_sqlFileSDDL : Tue Apr 15 17:10:43 2008
Thanks & Regards,
Sreeram
Edited by: sreeram kaki on Apr 15, 2008 6:45 PM

Error when opening BIDS 2005 - SQL Server 2005 - Urgent to solve

Hi,
today I've a problem when I try to launch the BIDS 2005: an error message says that isn't possible to find a component and says to reinstall the application. I cannot any records inside the event viewer that could help me. The SQL Server 2005 build is 9.00.5069.00.
BIDS 2005 is installed on my machine that has Windows 7 64-bit. Moreover I've also SQL Server 2008 R2 and BIDS 2008 R2: I cannot open also this tool for the same error.
Any suggests to me, please?
Thanks

Hi Pscorca,
According to your description, you cannot start Business Intelligence Development Studio (BIDS) in SQL Server 2005 and 2008 with the error "isn't possible to find a component and says to reinstall the application". As per my understanding, the issue
can be caused by some SQL Server files were corrupted. It's hard to give you the root reason that cause this issue based on the limited information.
In your scenario, please drive the BIDS installation folder (C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Microsoft SQL Server 2008 R2), try to open BIDS and check if this issue persists or not. Besides, you can try to repair SQL Server
installation using stepup.exe.
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

OraOledb for 64-bit, Linked Servers and SQL Server 2005 issues

Our environment is : SQL Server 2005, Windows Server 2003, 64-bit and 32-bit operating systems.
Problem on 64-bit operating system box: (32-bit works fine).
I am trying to access Oracle 10g database using linked server from our SQL Server 2005. In case of number fileds i got the following error:
Invalid data for type "numeric".
After going through one of the posting in this forumn i was able to resolve the problem by converting those column values to char while querying and then converting them back to numeric type on SQL server side.
But today i ran into another problem. There is a VARCHAR2 column. I was able to retrieve the data yesterday for that column but today i am getting a blank recordset. If i exclude the colum from the query then i am getting all the rows.
I am querying against a view and it has got a number of columns whose data type is VARCHAR2.
Again the problem is on 64-bit operating system only. We have a 32-bit operating system on which i am able to retrieve the data including this column. I looked at the data and everything looks OK. No funny characters etc.
I tried workarounds like using cast, to_char, checking for nulls etc., Nothing works.
Any help is greately appreciated. Thanks.

Did you find a resolution for this? We have similar problem. Set up a linked server in SQL 2006 to Oracle (running on Windows 64-bit) Linked server works and views I had set up were working but they added some new data in the Oracle test database I am using and now I get errors on one of the views.
Error I am getting on the view is "Cannot initialize the data source object of OLE DB Provider "OraOLDEDB.ORacle" for the linked server"
If I fine tune my queries to find the specific table or view that is at issue, then I get the error "inconsistent metadata for a column"

I plan to upgrade the SSRS 2005 SP2 enterprise edition in our internal web server to 2005 SP4, the Reporting server database is hosted in another sql server in sql server 2005 SP4. Do I need to do anything on the reporting server database side?

My question is what the steps do I need to take to upgrade SSRS from 2005 SP2 to SP4. The web server that host the SSRS is in 2005 SP2, and the OS is in window 2003.
Our SSRS report server and report server database are in different servers. The SSRS in the web server is in 2005 SP2 enterprise edition, the report server database is in sql server 2005 SP4 enterprise edition.
To upgrade the SSRS in web server from 2005 sp2 to sp4, do I need to backup/restore the encryption key? Nothing will be changed in the report server database. We will still pointing to the same database in the current server, all
I wanted to do is performing a inplace upgrade of SSRS from 2005 SP2 to SP4.
Any response will be greate appreciated. Thank you!
Li-hui Chen

Hi Lihui Chen,
According to your description, you want to install the Services Pack 4 for SQL Server. Right?
In SQL Server, Services Packs are used for fixing issues of current version product. It's not an Upgrade, you don't have to backup/restore your encryption key. You just need to download the Service Pack 4 on:
Microsoft SQL Server 2005 Service Pack 4 RTM . Please make sure you have administrative rights on the computer to install SQL Server 2005 SP4. For more information, see links below:
How to obtain the latest service pack for SQL Server 2005
List of the issues that are fixed in SQL Server 2005 Service Pack 4
SQL Server 2005 SP4, KBA 2463332, Installation Issues
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

PeopleTools 8.49 PeopleSoft Database Cannot Connect with MS SQL Server 2005

Folks,
Hello. I am working on PeopleSoft PIA. My system is Windows Server 2003, MS SQL Server Express 2005 Standard, PeopleTools 8.49. I am setting up PeopleSoft Database \PsMpDbInstall\setup.exe and got the errors as follows:
Error: Setup fails to connect to SQL Server. The default settings SQL Server does not allow remote connection.
Then I type in "sqlcmd" in Command Prompt and got the same error as follows:
Name Pipe Provider: Could not open a connection to SQL Server. MS SQL Native Client: the default settings SQL Server does not allow remote connection.
In order to fix SQL Server 2005 remote connection problem, I have done the 3 steps as follows:
Step 1: In SQL Server Surface Area Connection, enable local and remote connection, TCP/IP and Name Pipes, SQL Server browser Startup type "automatic" and status "running".
Step 2: Create exception for SQL Server 2005 and SQL Server browser Service in Windows Firewall.
Step 3: Add the default SQL Server Port 1433 into Windows Firewall.
But the above 3 steps cannot resolve SQL Server Express 2005 remote connection problem. Can any folks help to resolve this problem ?
Thanks.

Folks,
Management Studio can connect with SQL Server 2005 successfully.
I have turned off Windows Server 2003 firewall completely. But "sqlcmd" in Command Prompt still connect with SQL Server 2005 because its remote connection is not allowed.
Is the "not allow remote connection" problem caused by Windows Firewall or SQL Server 2005 itself ?
Thanks.

I can't link to an I series (IBM AS400) server from my sql server 2014 server (64 bit) -- but yes can link on sql server 2005 (32 bit)

I have an I series (IBM AS400) server linked "OK" to a sql 2005 sql server (32 big). I copied the link script (but changed credentials) from the sql server 2005 link and attempted to run it in the sql server 2014 server (on win 7 64
bit). There are no complaints from SSMS when I run the script, but when I try to query a table I get this error message:
OLE DB provider "MSDASQL" for linked server "CWMPDTA" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
OLE DB provider "MSDASQL" for linked server "CWMPDTA" returned message "[IBM][System i Access ODBC Driver]Key value in connection string too long.".
Msg 7303, Level 16, State 1, Line 11
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "CWMPDTA".
Here is the script (from the sql server 2005 (32 bit)) I ran on the sql server 2014 SSMS -- is there anything I need to change? How can I get this I series server to link to my sql server 2014 server?
USE [master]
GO
/****** Object: LinkedServer [CWMPDTA] Script Date: 9/25/2014 10:39:12 AM ******/
EXEC master.dbo.sp_addlinkedserver @server = N'CWMPDTA', @srvproduct=N'cwmpdta', @provider=N'MSDASQL', @datasrc=N'iseries2', @provstr=N'Provider=IBMDA400.DataSource.1;Password=myPwrd;Persist Security Info=True;User ID=myID;Data Source=10.0.0.51;Initial Catalog=T9S', @catalog=N'T9S'
/* For security reasons the linked server remote logins password is changed with ######## */
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'CWMPDTA',@useself=N'False',@locallogin=NULL,@rmtuser=N'myID',@rmtpassword='myPwrd'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'collation compatible', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'data access', @optvalue=N'true'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'dist', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'pub', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'rpc', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'rpc out', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'sub', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'connect timeout', @optvalue=N'0'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'collation name', @optvalue=null
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'lazy schema validation', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'query timeout', @optvalue=N'0'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'use remote collation', @optvalue=N'true'
GO
Rich P

Thank you for this reply. I went to the link and selected the option for DB2s and ran the install. Then I started up SSMS. I copied the same script as above, and it executed successfully. But when I try to run a query against
a table in a database on this linked sever -- I get this error message:
OLE DB provider "MSDASQL" for linked server "CWMPDTA" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
OLE DB provider "MSDASQL" for linked server "CWMPDTA" returned message "[IBM][System i Access ODBC Driver]Key value in connection string too long.".
Msg 7303, Level 16, State 1, Line 8
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "CWMPDTA".
Do I need to change the line containing -- @provider=N'MSDASQL', maybe?
this is the query I'm running:
select TOP 10 * from CWMPDTA.T9S.CWMPDTA.INSKU
The same exact query runs fine on the sql server 2005 linked server. Is there something I need to configure?
Rich P

Reading BLOB from SQL Server 2005 using DB Link from Oracle 10g

Hi All,
I am trying to read a table's data from SQL Server 2005 using ODBC DB Link created in Oracle 10g (10.2.0.3/4) database. I am not using oracle gateway.
I am able read all data except for the BLOB data from SQL server 2005. It gives error given below when I try to execute query SELECT * from T_TRANSACTION_DATA@sdeslink inside a stored procedure:
ORA-22992: cannot use LOB locators selected from remote tables
Kindly help how to read BLOB from SQL server 2005 inside Oracle 10g.
Best Regards!
Irfan

Irfan,
If you can read the blob data using 10.2 HSODBC then there should be no problem using the 11g gateway.
I recommend you download the latest version which is 11.2.0.3 available from My oracle Support as -
Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER
This is a full version and does not need a previous version to have bene installed. When installing it needs to be in a completlely separate ORACLE_HOME from the existing 11.2 install.
For the Ora-22992 problem have a look at this note in My Oracle Support -
Ora-22992 has a workaround in 10gR2 (Doc ID 436707.1)
Regards,
Mike

How can i make iphone mobile website, database in Sql Server 2005 ?

how can i make iphone mobile website, database in Sql Server 2005 ?
Thanks & Regards
Jamshed Ali
Email id: [email protected]

You need to be a little clearer in what you're asking.
You can't make any web site in SQL Server - it's a database engine, not a website tool.
What you can do is create web sites that pull data from a back-end SQL Server, but the SQL server doesn't handle the client connection at all (that's handled by a web server such as Apache, IIS, or similar).
There are many ways to build such a site including .NET, PHP, Perl and more (although I don't know all the options for Windows servers because they're not as common outside of corporate/enterprise networks).
In either case, given your choice of development language (HTML, plus one of the PHP/Perl/.NET/etc. options), plus your database (SQL Server) plus your web server (IIS, Apache, etc.) you can make any web site you like (or, at least, you're capable of developing).
If you want to opimize that web site for iPhones then there are many references on how mobile browsing differs from the desktop. I'd recommend this book as a reference (and, yes, I understand the irony of linking to a paperback book for web design guidance ). Googling mobile web design (or iPhone web design) might yield more results.

OraOledb, Linked Servers and SQL Server 2005 issues

Some issues I've come across when using SQL Server 2005 (and SQL Server Express 2005), the OraOLEDB provider (10.2.0.1) and a linked Oracle database (8.1.7.4.0 64-bit)
1) You must set the OraOledb.Oracle\AllowInProcess value to 1 to allow the OraOledb provider to run in SQL Server's process. Without doing this I receive an 'unspecified error' from the OLE DB provider when attempting to run a query
2) When running a ' select * ' query across a linked server using the provider, I receive the following error: Msg 9803, Level 16, State 1, Line 1
Invalid data for type "numeric". I can, however, select all of the columns by name and the query completes (no error). Sometimes the 'select *' query returns a few rows before the error, sometimes it doesn't. The Microsoft Provider for Oracle does not have this problem

Okay... I've got a Win2K3 Std Ed server (x64) running 64-bit SQL Server 2005 Enterprise Edition. I've installed the Oracle 10g 10.2.1 full client and admin tools, added two named services via the NetConfig assistant, and successfully set up (and tested) a connection via the ODBC Administrator to an Oracle database.
Now... when I try to create a new connection manager in SQL Server 2005 Integration Services, the OLEDB provider for Oracle can't be found, and when I try to manually add an underlying OLEDB connection to the database, SQL Server reports:
Test connection failed because of an error in initializing provider. The 'OraOLEDB.Oracle.1' provider is not registered on the local machine.
Does anyone know what I need to do to see my ODBC Server data connections in SQL Server 2005 (64 bit)? I don't have this issue on my 32-bit SQL Server 2005 servers.

Linked Servers - Sql server 2005 to connect to Oracle 11g using ldap.ora instead of tnsnames.ora

We have a SQL Server 2005 64bit box that needs a linked server created to Oracle 11g 64bit box. I have all the Oracle client software installed and can successfully connect to the Oracle database using SQL+ on the SQL Server 2005 64bit box. When I create
the linked server and select the OraOledb.Oracle provider, I get the TNSNames error. The Oracle server does not use tnsnames.ora it uses OLAP.ora to resolve. How do I get Linked server to stop trying to connect via TNSNames and use the OLAP.ora file instead?
I can't find any articles for this specific issues. All Oracle examples tell you to use TNSNAMES. The Oracle server is not under my companies control so I can not force the vendor to use tnsnames instead of OLAP.

Hi,
Have you got a resolution?
Thank you.

Cannot connect to Oracle 11gR2 database from SQL Server 2005

Both SQL Server (Windows) and Oracle (Linux) are in 64bit environments.
I have done the following on a Windows 2008 R2 with SQL Server 2005:
Install InstantClient from Oracle Database 11g Release 2 Client (11.2.0.1.0) for Microsoft Windows (x64) to C:\Oracle
Install oledb from 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64 by executing install.bat oledb c:\oracle odac
Note: Not sure whether 11.2.0.2.1 version of ODAC will cause any problem since I cannot find 11.2.0.1.0 version.
I have checked the Allow inprocess of OraOLEDB.Oracle provider in SSMS.
I have executed sp_addlinkedserver @server = 'ORACLE_TEST', @srvproduct = 'Oracle', @provider = 'OraOLEDB.Oracle', @datasrc = '##.##.##.##:1521/TEST'
The ##.##.##.## is the ip address of the Linux server which has the Oracle 11gR2 database TEST.
I have executed sp_addlinkedsrvlogin @rmtsrvname = 'ORACLE_TEST', @useself = 'FALSE', @rmtuser = 'xxxx', @rmtpassword = 'yyyy'
The xxxx is the oracle username and yyyy is the password for the oracle user xxxx.
I know the oracle database TEST is up since I have setup connection in Oracle SQL Developer having:
##.##.##.## as the hostname
1521 as the Port
xxxx as the username
yyyy as the password
TEST as the service name
When I click Test Connection for the linked server ORACLE_TEST in SSMS, it just hang.
When I issue a query like select count(*) from oracle_test..xxxx.table1, it just run forever. I'm not so sure how to query an oracle table. I have also tried select count(*) from oracle_test.xxxx.xxxx.table1.
When I retype the password in the Linked Server Properties, it just run forever.
Do I need to create a tnsnames.ora on the Windows machine?
Do I need to change the tnsnames.ora on Linux machine?
I'm very new to Oracle.

This forum is dealing with connections from an Oracle database to SQL Server - so the Oracle database is the driving site and this is the way round from your linked server set up.
As you're suing the instant client you might post your issue in the instant client forum:
Instant Client

Linking Documaker Studio to database (SQL server 2005)

Similar Messages

Maybe you are looking for