Linking eCatt to Solution Manager
Hi All
I am new to this so please bear with me.
I am currently learning ECatt. I have created a small chained script within ECC6 which utilises an external file.
If I test this from ECC6 - it performs as expected - and utilising the external file for data.
When I then try to launch from Solution Manager, I get "Variants that match Selection XXXX Cannot be Found".
When I go back to the Test Configuration and take out the option of the external file and use internal with a variant - I have no problem.
I am wondering if it is possible to utilise an external file via Solution Manager. If so, can anyone advise what may be the problem?
It is a little confusing, knowing that I can perform the test directly within ECC6.
Thanks in advance
Elvie Jenkinson
Hello Elvie,
I am facing a similar problem. Where you able to fix this issue? Kindly let me know the solution as well.
Thanks,
Majisha.I.B.
Similar Messages
-
Migrate eCATTs into Solution Manager.
Hi.
For historical reasons all our eCATTs are located in another system than the Solution Manager system.
Since introduction of the Solution Manager, this has always introduced limitations, errors and other challenges when working with testing.
Now I am wondering if anyone knows a method to migrate the eCATT test cases from the other system, into the Solution Manager system?
Thanks in advance!
Best regards
Per ChristiansenHi Per,
to migrate eCATTs ? It is not necessary that the eCATT have to be in Solution Manager to use them. IN SOLAR_PROJECT_ADMIN you can define per project where the tool should look for same objects like eCATTS, you can say local or remote in an other system, you can say optional or mandatory.
I recommend to store eCATTs in the system with the highest SAP_BASIS, ok SolMan 4.0 has SAP_BASIS 7.0 this is quiet good. Then all infos are stored centrally which also makes sense.
So if you want to transport eCATTs to SolMan, where is the problem ? eCATTs have a package assigned, so you can put them on a transport request and import them into SolMan. If you have stored them as local objects, you can go to SE03 and change the package assignment to a package you can transport. I think this should help you. If you also want to transport the old eCATT results, I think this is not supported
Regards,
Udo -
Webdynpro testing using Ecatt from Solution Manager
Hi Experts,
I am trying to do test a Webdynpro application using Ecatt. But when i go to test script --> pattern
in the following popup i am maintaing the following data
group : UI Control
Command : Webdynpro
Interface : [GENERATED] then START RECORDING
i am getting the below error An error probably occurred during the logon to the Web Dynpro target system. Check user name and password in your eCATT target system.
I have created and mapped a HTTP rfc. Assigned ECATT_HTTP user also in the RFC. Also i followed all the steps mentioned in the [http://help.sap.com/saphelp_nw2004s/helpdata/en/8e/df9f40eb72371be10000000a1550b0/content.htm]
kindly help me
regards
Naveen>
Naveen Kumar wrote:
> Hi Experts,
>
> I am trying to do test a Webdynpro application using Ecatt. But when i go to test script --> pattern
>
> in the following popup i am maintaing the following data
>
> group : UI Control
> Command : Webdynpro
> Interface : [GENERATED] then START RECORDING
>
>
> i am getting the below error An error probably occurred during the logon to the Web Dynpro target system. Check user name and password in your eCATT target system.
>
> I have created and mapped a HTTP rfc. Assigned ECATT_HTTP user also in the RFC. Also i followed all the steps mentioned in the [http://help.sap.com/saphelp_nw2004s/helpdata/en/8e/df9f40eb72371be10000000a1550b0/content.htm]
>
> kindly help me
>
>
> regards
> Naveen
Hi,
You may not have a valid user id in the target system.
Regards,
SSN. -
FAQ - SAP Solution Manager for VARs
You can find further technical questions around configuration & functionalities in a comprehensive
FAQ to SAP Solution Manager for VARs.
This FAQ covers questions and answers around:
> SAP Solution Manager, enterprise edition
> SAP Solution Manager VAR setup: configuration of Service Desk
> Work Center Service Desk: functions & configuration
> Work Center System Monitoring: setup of SAP EarlyWatch Alert
You can access the FAQ directly thru the following link [FAQ - SAP Solution Manager for VARs|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000490172009E].
Navigation path: SAP Service Marketplace > SAP Support Portal > SAP Support Infrastructure > SAP Solution Manager > SAP Solution Manager for Partners > Information for Service Provider > Training and HowTo Documents > Administrator
Please notice: The FAQ will be updated from time to time.
Edited by: Susanne Schlehf on May 4, 2009 2:48 PM
Edited by: Susanne Schlehf on May 18, 2009 12:56 PMHello Richard,
(1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information.
(2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
(3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
(4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
Kind regards
Heinrich -
What is source client of Solution Manager?
Hi
I wanted to apply note 990534 to configure MOZ.Can any body tell what exactly is source client of Solution Manager?
Regards
AratiCheck the below links :
What is Solution Manager?
Solution manager
/thread/384815 [original link is broken]
Is SAP Project System part of Solution Manager?
SAP Solution Manager is a centralized, robust solution management toolset that facilitates technical support for distributed systems -- with functionality that covers all key aspects of solution deployment, operation, and continuous improvement. It combines tools, content, and direct access to SAP to increase the reliability of solutions and lower total cost of ownership.
With SAP Solution Manager, you can be sure your entire SAP solution environment is performing at its maximum potential. The toolset addresses your entire IT environment, supporting SAP and non-SAP software and covering current and forthcoming SAP solutions. As part of SAP NetWeaver, SAP Solution Manager is included in the annual maintenance fee for SAP solutions.
SAP Solution Manager targets both technical and business aspects of your solutions, focusing strongly on core business processes. It supports the connection between business processes and the underlying IT infrastructure. As a result, it eases communication between your IT department and your lines of business. And it ensures that you derive the maximum benefits from your IT investments.
Check these links related to solution manager
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce89c290-0201-0010-5985-dd64605111fd
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce0b74e3-0601-0010-29a0-f2a6af98ef06
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5348ada6-0301-0010-f38f-a5076178843e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5d29d690-0201-0010-2f9f-a0f957dee385 -
Info on SAP Solution manager ..
Hello.
Can anyone provide some links on
SAP Solution manager and
SLO(System Landscape optimization)
thanks in advance
ShivaHi,
Some good links:
http://help.sap.com/solutionmanager
http://service.sap.com/rkt-solman
Besides you can also use SDN and in service.sap.com there several quick links as ahelp to you but there you need to choose solution manager. This you can do by some navigation here and there in service.sap.com
regards and do reward people for the help extended. -
Hi,
what is the link between SAP Solution manager & XI?
How are they intergrated? which one is used for integrate both? Is there any tool?
Does SAP Solution manager is required for XI? For what purpose?
Please answer my questions.. (plz Dont give any links..Just answer in words)
ThanksHello Silviya,
As XI, PI 7.0 exacty is a NW2004s product, sorry! now this is called NW 7.0, them you need a Solman system in order to get the installation key for the PI 7.0 installations.
This is the only prerrequisite between PI 7.0 and Solman 4.0.
After, as Solman has its own SLD, you can decide that your XI system landscape uses or not this SLD, of the Solman, as central SLD for all your system landscapes, or not, you can choose which SLD to use.
This is the only relation that they can have, that XI systems use or not the SLD from Solman system.
Apart from that, you can configurate the XI systems as satellites of solman, in this case you can manage the XI implementation project from solman system, you can monitor the XI systems from solman, etc, the usuall tasks that a solman can do for a satellite system.
The BPM from PI 7.0 has nothing to do with the Business Process Monitoring in Solman system, these are two different things.
The BPM in PI 7.0 is how you define the coreography of your xml messages inside the PI, this has nothing to do with the BPM in Solman that is an scenario to monitor business steps in your system landscapes.
Hope this helps,
Dolores -
Shaping Implementation Solution Management using Solution Manager
Hi Everyone,
Its truly amazing to see the way SAP solutions are shaping up and the way SAP is moving ahead with its roadmap of achieving 1 Lakh Customers by 2010. As we move ahead, we see solutions that focus more on business processes and break these business processes into smaller components, the utility of a tool that integrates applications and solutions becomes imminent.
Though <b>Solution Manager</b> has seen extensive usage in the area of support and monitoring, it still has to make a mark in the area of implementations. This gives us an opportunity to seek and suggest improvements to Solution Manager tool, specifically in implementations. Request if you all could share your experience with Solution Manager in the following areas
Key Functions
Scoping the solution landscape and business process
Project Scoping, issue tracking and reporting
Project Administration
Template Management
Roadmaps
Business Blueprint
Configuration
Customizing distribution
Quality Management
Test Management
Integration Management
Data Management
Regards
Sridhar SundaramHi,
Welcome to sdn.
This is something which can't covered in a single reply.
Check the following link which has solution manager weblogs.
Weblogs Related to Solution Manager
Also visit the solution manager on help and service.sap portal.
List of tcodes availble in solman
https://forums.sdn.sap.com/click.jspa?searchID=5183519&messageID=4075355
Please reward points as it motivate others for reply. -
can anyone suggest/guide me with training doc for solution manager. I am a QM Consultant and interested in going for certification in Solution Manager, is it a good idea?
Thx in advance
Jaison
Edited by: Jaison on Dec 19, 2008 7:48 AMHi Jaison,
check these threads:
SAP Solution Manager - Material
solution manager overview
/message/5533583#5533583 [original link is broken]
Solution manager.
Thanks!
Preethi
Edited by: preethi R on Dec 19, 2008 8:11 AM -
Basics and any documentation on solutions manager
Hi,
I would really appriciate it if i can get any documentation/ information/links on the Solutions manager and the different functionalities in the module.
Thanks in advance,
KanishkaSolution Manager is designed to assist entire life cycle of your solutions....
During implementation / upgradation ->it will help you manage your project by giving road maps, tools to blue print, tools to configure your systems according to your blue prints, testing workbench to test configured systems, Learning Maps to educate team by creating lessons.
During support ->
Support desk -> A tool to manage problems faced in your systems.Once configured users can raise support messages from any of the system and they can be managed in solution manager.. and from there they can be sent to SAP for their support...
Change request management -> A tool to handle change managment
BPM- Business process monitoring..
You can get reports of your systems.. like EWA,SLA
Please check http://help.sap.com/saphelp_sm40/helpdata/en/45/51fbdbd4941803e10000000a1553f7/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce89c290-0201-0010-5985-dd64605111fd
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce0b74e3-0601-0010-29a0-f2a6af98ef06
If you require any specific information about solution manager do come back..
regards
Mrutyunjay
Reward points if found helpful -
Create Support Messages in Solution Manager
Hello,
Can you please tell me the basic and easy steps for creating Support Messages in Solution manager.
I am using Following link for the same.
http://help.sap.com/saphelp_sm32/helpdata/en/29/fc811d62c24906b71f395ec8558cd7/content.htm
but i am not able to understand the steps from No. 4. When i click on "New" button i gor an error saying that "Exception condition "CUSTOMIZING_MISSING" raised."
Please guide.
I think the version of the Solution manager on which i m working is different from that of the version for which is documentation is prepared.
Thanks in advance,
PrashantHello Prashanth,
You, the Solution Manager version could be different than the version which help.sap.com describes. However, may I know which user and its authorizations you are using to create Support Message? Because, authorizations plays most important role.
Please go through the following links.
SAP Solution Manager Roles
http://help.sap.com/saphelp_sm40/helpdata/en/f9/35023b6b33162ee10000000a11402f/content.htm
First steps to work with Change Request Management scenario
First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
Managing Changes with the SAP Solution Manager
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5d29d690-0201-0010-2f9f-a0f957dee385
Hope the above info is helpful.
Regards,
Satish. -
ECATT integration with solution Manager
Hello Colleagues,
Please let me know if any of you have worked on integration between Solution Manager and eCATT.
I have the scripts in eCATT system now i need to run these scripts from Solution Manager system in the target system.
Any info would be of great help.
Thanks,
AjayHello Ajay,
Have you seen these links?
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/7e/8186fa137998448de956476b8cecdc/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/de/50e848f5f311d5997000508b6b8b11/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/48/e151fddb163184e10000000a421937/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/59/f49e6fe97711d5995d00508b5d5211/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/cb/cb3a3e5069eb6ce10000000a114084/frameset.htm
These links are from the Solution Manager Help Library, so the information is specific to Solution Manager for eCATT
Regards,
Paul -
Links to Documentation in a Solution Manager Project
Solution Manager Project Documentation has a feature that allows you to "link" to differnet levels of your documentation. For instance, if I attach a documentation template at the Process level of a Project and there are 10 process steps under that process, I can create links at each process step that will link to the document that I attached at the process level.
Is there a way to automatically build these links or must I create each link manually?
ThxHi Rod,
at least until solman version 7.0 ehp1 i'm not aware of any automatic way to do that. Maybe in the 7.1 could be any other option, maybe importing from any external tool.
I believe that the only things you can do in a node and replicate to the subnodes are the settings in the administration tab.
Kind regards, Fabricius -
Linking Solution Manager Project Documentation - MS Sharepoint
Hello,
When working on a project in Solman we upload documents as needed in each phase or scenario. This is well known to all... But we already also, have an MS Sharepoint portal sometimes with documents already stored there.
Is there a way to include the link to sharepoint ?
In other words.. Is there a way to utilize the folder structure provided by sharepoint in solution manager without replicating documents ?Hello,
I think we found a way... Just during uploading a file to Solman, choose the option "web link", then your documentation tile will jump to the sharepoint folders.
Thanks,,
Edited by: Khalid Al-Tayaran on Nov 11, 2009 8:18 AM -
Linking solution manager projects with CHARM implementation project
Hi Guys,
Currently i am working in CHARM implementation project, i have created one CHARM implementation project with urgent correction and i am able to create the Transport request and release the transport request succesfully and i am able to move it to quality system successfully. But my customer is asking to link the solution manager project to CHARM implementation project.
Earlier before implementing CHARM they have implemented project managent in solution manager, during that project they have created so many projects which are currently running, now they want those projects to be linked CHARM implementation project.
When ever they create a transport request through CHARM they want the TP to be saved under a respective project which they are using currently. but according to my knowledge the TP can be saved under CHARM implementation project only.
Now i want to know whether the projects created in SOLAR_PROJECT_ADMIN can be linked to CHARM implementation project. Pls give ur valuable inputs as it is very urgent.
Thanks&Regards
RajuHello,
We have implemented this with two systems landscape where in we have in place a Solution Manager Dev system and Solution manager Production system both are SOLMAN 4.0 with SP12. So the path for us to move the changes is from Development Systems to Production system.
We have ChaRM between the Dev and production. We reapplied the satellite system concept. For us the Solution manager Prod is a satellite systems all the changes that we move from Development system to Production systems is tracked with necessary documentation in the ChaRM process.
Yes, I agree with you that this is not any big magic. Working with two SOLMAN implementation, I strongly feel that SAP needs to have well rounded ChaRm processes. We have robust Change Management Process, but when we moved to ChaRM we were limited functionality of the ChaRM processes.
I had approached and did some research on how other companies are implementing the same process. Most of them have almost the same process for tracking SOLMAN changes. I am still look out for improved process to manage SOLMA changes.
Hope this helps!!! Thanks
Vish
Maybe you are looking for
-
How do I open a new FireFox browser window to the home page and url filled?
win 7 64-bit, firefox 5 open new window no url. When I have firefox open and open a new browser window, the new window does not open on the home page and no url is present in the address field. If I click on the favicon in the address field, the url
-
I understand that this is helpful for those that have limited data each month, but for me, and I'm sure everyone else who has unlimited data, this is just a nuisance and rather frustrating. I'm in the Air Force and where I am right now I have zero ac
-
Using Elements 7... I just bought his to try my hand an some vacation videos... last time I used Elements was v3! Anyway I can't for the life of me burn a DVD that is readable once it is finished. I'm using some older 4x DVD+R media. Everything seems
-
Can't Convert - PDF to WORD - have paid account....
lately everytime I try to convert a PDF to a Word Document an error comes up that states: "An error occurred while trying to access this service." I have paid for the account - so what's the problem? Tried restarting computer, various files and no
-
Can i leave my power adaptor plug in to mba 2011 after fully charging it?
Hi all, I was wondering whether i can leave my power adaptor plug in to my mba 2011 even after its gully charged? Appreciate all feedbacks!