Linking exturnal hardware to sync with logic

hello, i require help with linking my yamaha rs7000 with logic so that logic triggers the rs7000 sounds. i've been trying for several hours to to record and have been having problems. i can use the rs7000 to trigger logic but for some reason the first note of my sequence is truncated. i need to be able to record my sequences from the very begining with all notes intact.

I feel your pain.
Try starting the Logic song from bar -1

Similar Messages

  • IPad music apps to sync with Logic

    Hello.
    Is there any way that some of the bought music apps on an iPad or iPhone can sync with Logic X like Rebirth for instance?
    Peter

    In iTunes pull down the iTuness menu and select About iTunes. Post back here what the version number is. Also tell us what version of OS X your computer is running. An iPad requires a minimum of OS X 10.6.8.

  • Want a particular audio to sync with logic

    I have an audio that I want to sync with Logic. Even though I turned it into an apple loop it still wont sync with the click. I'm not sure what else to do to get it to sync, and off course it's always to loop you want the most...lol.
    Thx...

    No I didn't use the apple utility to convert it. I just made sure that the length of the audio was correct by doing command-T, and adding it to the Apple loops library, but I think there is something wrong with that audio file, cause within the same loop folder all the others sync, but that one that I want. I don't know how to convert using the apple utility. I always Command-T.

  • Reason beat tempo not syncing with Logic Tempo???

    Hi,
    Made a beat in Reason 5
    Exported loop at 137 bpm and saved to external hard drive.
    Imported loop into Logic with Logic tempo set at 137 bpm.
    Set the metronome on for recording. Pressed record and and beat & metronome are out of sync.
    I used beat detection to try find the tempo (said it was 137.1672 or something) yet still the metronome & beat go out of sync...
    Any ideas?
    I'm going to try saving the beat to the internal harddrive and see if that is the problem.
    The external hard drive is USB not firewire.
    Hope you can help me...

    to bring your reason audio into logic in perfect sync, open reason as a rewire slave to logic and set up a logic aux track input to reason L&R. Set your locators in logic to the loop length and bounce (with "add to audio bin" enabled so its easy to drag it into your song). This locks the 2 clocks together. Which drive your audio is on is irrelevant.

  • Audiuo video sync with Logic Pro

    Greetings,
    I am working in FCP on a HD project. I export the video (Export as Quicktime Move, Video only, self-contained) and import into Logic. I set the frame rate in Logic to 24, which is what the Sequence in FCP is at. I edit dialog and music succesfully in Logic. Then bounce all tracks to a stereo AIF. I drop this AIF in a new track in the previously mentioned FCP project, muting all old audio tracks.
    The problem I'm having is that the audio (the AIF exported from Logic) drifts out of sync towards the end of the FCP sequence.
    Any ideas?

    Logic may not support 23.98fps (it's nowhere in the user manual). Any of you 24fps gurus correct me if I'm wrong, but 24fps in FCP is technically 23.98fps. Therefore, editing the audio at 24fps, then syncing it with 23.98fps footage will, in time, drift out of sync.
    tim

  • Help getting a vocal track to sync with Logic PRO

    I am trying to do a remix to a song which I have the acapella vocal track to. Can someone please let me know how to get the BPM of the vocal track then get the sequence in Logic Pro to sync up with the vocal so I can remix. Please help.

    Unless it is a totally robotic performance, you can't magically extract the tempo value of a vocal performance.
    If you want to be a remixer, your first skill to develop is to find the right tempo, by estimation (for the ballpark) and experimentation (for the exact value). Use an empty Arrangement (or soloed vocals) with but a click going on.
    Once you get close, you may find that you have to shift the vocals back or forth a bit as it's highly unlikely that it begins at an exact downbeat.
    Christian

  • Who uses mobileme share/sync with logic pro?

    hi.
    just wondering if ANYONE actually uses the mobileme sharing preferences within logic and for what reason... do you sync between studio and home/laptop or is it just a backup?
    Im interested to the feedback people have on it.
    Cheers!

    I use it, though only to keep changes I make to my Logic key commands in sync across the various Macs that I use. I have a desktop for the studio, and laptop for the road, and another desktop where I teach. It's possible to accomplish pretty much the same with a flash drive. But since I'm already paying for MobileMe to keep calendars, contacts, bookmarks and such in sync across each machine and my iPhone, I decided to use MobileMe for Logic's key commands as well. I haven't actually tried the "Backup all my settings on MobileMe" option, though now that your question has me thinking about, perhaps I should. As far as just backup/restore is concerned, I do use TimeMachine, and I periodically run CarbonCopyCloner (which I think is a great little utility!). But an additional off-site backup for Logic Settings via MobileMe would probably be a good idea. Thanks for inspiring me to re-consider!

  • Virus ti coming out of sync with logic 9?

    The timing on arps is terrible in logic 9 on the ti, is there a fix for this?

    What I would do is first remove the MIDI drivers that Protools installed. You're not using MIDI on the mBox so it's not going to affect anything.
    Root/Library/Audio/MIDI Drivers
    and/or
    User/Library/Audio/MIDI Drivers
    You are looking for:          DigiDioMidiDriver.plugin
    Drag (move) it to the desktop or a folder of your choice for safekeeping.
    Reboot the Mac and check Logic.
    The reasoning behind this is Logic monitors ALL MIDI inputs whether they are being used or not.
    And besides, this is a good troubleshooting procedure and is narrows down where the incompatibility lies.
    After you do the above make sure you're using the latest version of Hypercontrol downloaded from the Axiom website.

  • Apogee Ensemble or Symphony to work with Logic?

    Hello,
    I'm considering to buy Apogee multi I/O hardware to work with Logic Pro in my studio.
    The choice is between an Ensemble interface and a Symphony System (Rosetta 800).
    I know that in terms of quality the second one is better and that Ensemble is more affordable in terms of price.
    What I'd like to know is how does Ensemble work in terms of LATENCY (I hate it) and if VBus is a big +point for Symphony when mixing and using heavy plug-ins and instruments like NI Battery or B4 (for example).
    Could any one help me in this choice.
    Thanks!

    Thanks
    Then I'm more interested in buying an Ensemble instead of a Symphony System for my project/mixing studio.
    Yeah, my work is all in Logic.
    I produce reggae music. I record some live instrument and vocals into logic, then I work with'em and some virtual insturments and plug-ins.
    I thought that VBus could help to heva a more efficient RAM usage, allowing me to run big plugins "outside" Logic.
    Talking about latency, it could also be due to my USB keyboard/controller, I know.
    I asked about that also because using my apogee duet with logic I had some latency when recording a voice in a porject with virtual instruments and plugins. Maybe I do something wrong.
    Big Up
    p.s. I visited your site. Nice productions
    Do you know some links where I could master my tracks (reggae)?

  • Using Multiple Audio Interfaces With Logic (Edirol FA-101)

    I just bought tiger so that i could aggregate my two edirol fa-101's and they still dont work. They cut out and the sync buttons flash. Its as if the computer ant deal with so much information. I stop all large processes on my g5 dual 1.8 and try again. They cut out whether im in Logic or not. One works ok but still cuts out sometimes, adding another has made the problem twice as bad. Any advice please. Ive talked to edirol and they have no idea what to do... Thanks, Ben

    According to their web page, the FA-101 does accept SPDIF. They should be wired together with one unit should be set up as a master and the other as a slave. You units should sync up then.
    As they are right now, the two units are competing to sync with Logic, causing the sound to pop and cut out.
    jord

  • Audio Interface and Converter HardWare for my future Logic

    Hello, I'm French.
    I will buy a logic studio 9 software + a mac pro computer
    But i don't really know what Audio Interface and Converter HardWare take?
    I'm look for Digidesign + HD Cards or Apogee System or RME, MOTU
    After I will buy an SSL mixage table for my studio (in a long time^^)
    Sorry for the bad english :S

    Logic and Protools don't have exactly the same concept when it comes to audio hardware. But if you want Apogee hardware to use with Logic, then there are options for either PCI-based or FireWire. Go and look at the Apogee site:
    http://www.apogeedigital.com/products/symphony-system.php
    or
    http://www.apogeedigital.com/products/ensemble.php

  • Hardware "recording in session" light with Logic punch in?

    Is there any easy hardware solution for having a punch in/recording light for the vocal booth... when I am in record mode in Logic.. or other DAW?
    I have a Transport Remote that gets all the signals from it, so has any company made a simple red light type of thing.
    Sometimes that visual helps when doing a lot of quick punch work.
    I cue the people a lot.
    Sometimes not.

    I just hate going back and forth from premiere and logic and all the extra time wasted exporting the files so they will work with eachother.  
    I just thought of something else.... Is there a way that I can get the video in premiere to play the same time I push record in logic pro and maybe sync with it?
    Like if I push record in logic the video in premiere will start playing then when I push stop in logic pro it will stop in premiere or at least stay in sync with it so the timing will be right?
    if anyone has any ideas throw some out there I would love to hear them.
    Thanks!

  • Syncing two macbooks with logic pro

    I have two macbooks from 2007. Both have logic pro 8 on them. I'm scoring to film but neither machine can run the video and audio together without having
    serious audio skipping and video freezing. My Question is can I sync the two machines together where one machine is used for composing/scoring and the other just playsback the video in sync with the audio? I can't afford a new computer with a processor that could handle these tasks together so I'm hoping that this option would suffice.

    I think Logic Node might help with your processing issues.  Essentially you can link your computers over a gigabit ethernet cable to divide up the load.  I happen to have Logic Pro 9 so it might not work the same for the previous version.  Consult your manual and see if that could help you out.  Best of luck : )

  • Syncing an Ipad with Logic

    I would like to know how to link an IPad with logic pro 9
    Tanks!

    Don't believe this is supported, but if there is not an option to export direct to your iTunes library, import the export with iTunes and transfer to your iPad via the iTunes sync process.

  • Linked Smart Object breaks a PSD after sync with Creative Cloud

    After using a linked Smart Object inside a PSD and sync with Creative Cloud, the online version of file does not preview and does not work with any online feature, like Extract, Layers, or Anything else.
    Any suggestion? Thanks in advance.

    Thanks for the example Deryck,
    The preview seemed broken on the comments tab but the image was appearing for me under the Extract one. When I downloaded the original it looked like the linking was preserved. The online version didn't seem to denote in any way that the Cecinas layer contained a Linked Smart Object, which might be helpful, but it did have the preview. Here are some screenshots of what I was seeing. Thanks for posting about it. I'll pass it on to our engineering department.

Maybe you are looking for