Linking Frames Problem

Here's the deal, I have a left frame, right frame, and
mainframe. In the left frame I have a list of main categories that
I am linking to subcategories in the right frame. To do this, I
created new HTML pages and typed the lists on those. So when I
click on a link in the left frame a subcategory list appears in the
right frame. My problem is that it won't let me link from the right
frame back into the mainframe because it's on a whole different
page. Please can somebody show me what I'm doing wrong.
I hope this wasn't too confusing. Thanks.

Post a link to your site, please.
You are aware of the many reasons not to use frames, right?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dreamw3averhelp" <[email protected]> wrote
in message
news:g1k0qk$bb7$[email protected]..
> Here's the deal, I have a left frame, right frame, and
mainframe. In the
> left
> frame I have a list of main categories that I am linking
to subcategories
> in
> the right frame. To do this, I created new HTML pages
and typed the lists
> on
> those. So when I click on a link in the left frame a
subcategory list
> appears
> in the right frame. My problem is that it won't let me
link from the right
> frame back into the mainframe because it's on a whole
different page.
> Please
> can somebody show me what I'm doing wrong.
>
> I hope this wasn't too confusing. Thanks.
>

Similar Messages

How to insert, merge linked text frames into existing long linked frame story?

I have a book with a single story, many linked frames/pages. The index takes 4 pages in the last part of the book, but not the final pages. I have regenerated the index and it is 4 pages of linked frames in a separate story in extra pages I generated at the end of the book. I selected the new index pages from the pages panel and moved them to the proper location in the book. I want to delete the old index & pages, but that still leaves me with two stories with the main story frames jumping around the index story frames. I want the index to be part of the main story so that if the text expands the index will move.
In short, insert and merge a story and its associated text frames in the middle of another story.
My move pages approach got it in the right location, but it will not float if the page count changes.
The only way I can see to do this is go back to my new index, select it all in the story editor, copy it, go to story editor on the original story, and paste in the proper location. This works, but it seems as if there should be a way of also doing it with frames, in ports, out ports, etc.

I must be unclear on the concept. I moved my new index into the existing story between the two desired pages. This shows the original story on the left with the text threads going around the inserted Index story:
Now I click the outport of the text frame on the left and alt click into the Index frame. That overwrites the contents of Index.
Not what I want. I actually want to split the text as well, and just thread thru the index frames and then continue with the original story. I did the above as a test case. For my actual problem, copying the index story in story mode, and pasting it over the appropriate text in the original story solved my problem.

Anchoring Linked Frames or ICML Files???

Is there anyway to anchor linked frames or ICML files in InDesign? I would like to re-purpose some content from other files and anchor the text into the text frame so the content flows around it. I notice when I try to cut-n-paste to anchor, the linking goes away. Any thoughts?

Hi Peter,
Thanks for your attention. No, I'm not trying to thread a text frame, I just want to place a text frame with say a warning or caution anchored into another text frame at a relevant location. This way if I later decide to update the warning/caution it will be updated in all documents. Unfortunately, when I've tried to anchor the linked text frame into another document (at the relevant location), it breaks the link. I can drop it into another document without anchoring it, but of course when text is added to the text above the linked text frame, the placed frame will not move with the relevant text. I had hoped it would work the same way as anchoring an image frame in a document, but it doesn't seem to be working out that way (or I'm doing something wrong).
I see what you're saying about placing it in a separate frame in a different document, but again, it won't flow with the text.
Thanks again for your insight!

Does iphone 4's dailymotion link have problem?

does iphone 4's dailymotion link have problem?

gdgmacguy wrote:
you will not be able to use it as that phone is forever locked to Sprint.
Not true. In fact Sprint will unlock the sim slot for customers in good standing.

NI PCIe-1433 Camera Link frame grabber programming using VC++

Hello, I have a Basler Camera Link-compatible camera and they use the NI PCIe-1433 Camera Link frame grabber as the image acquisition device.
Right now, I want to develop some applications on that camera and need to do programming on the NI PCIe-1433 by VC++.
So I want to know where I can find the software development kit for the NI PCIe-1433. For example, I can control the camera to grab the image by using the different functions(such as imgGrab(), or somthing like that ) from that software development kit.If there are some sample code that would be better.

Hi Wrsbj,
The IMAQ functions that you mentioned are contained in the IMAQ driver, which is used to acquire from Camera Link frame grabbers. I would also check the compatibility chart, to make sure that you get the version you need. As for example programs, you can take a look at this KnowledgeBase article concerning building and running the IMAQ examples in VC++.
David S.

Premiere Elements 7 - When play my work frame problems occur. codec issues?

Hello,
I use Premiere Elements 7 to edit my videos; however, recently I have found that most of the videos I add to my work shows a frame problem every time I play. I am not so familiar with the terms but I will try my best to explain how it happens.
1. I open a new project
2. Add a video (usually avi format)
3. I play the video whitout editing.
4. I see that after every 5 frames there is a frozen frame (like a dublicate of the 5th frame)
It results me to cut my video in every 5 frames to get rid of the frozen frame and it takes a lot of time.
What would be causing that? When I play the video with my media players it shows perfectly but when I add it to Premiere Elements 7 to edit, this is what happens.
I also see that there are multiple fddshow icons on the right bottom of my screen.
I assume there is something wrong with the codecs. In that case, what would be the best codec to have in order to edit my videos on PE7?
What do you suggest I do?
Thank you in advance.

Dear Bill,
I have formated my computer and reinstalled my operating system Vista Home 32 bit. Then I switched from PRE7 to PRE8.
This is my computer info below;
CPU Türü QuadCore Intel Core 2 Quad Q9300, 2500 MHz
4GB RAM
ATI Radeon HD 3600 Series 512 MB
I have AVC Core 2.0.0 codec, NVIDIA PureVideo codec for MPEG, K-lite MEga codecs installed as they are-without any configuration.
Gspot still shows Xvid codec XviD ISO MPEG-4.
File Length Correct
Multipart OpenDML AVI (2 parts)
(69639 frames in first part, 2663 frames follow)
Interleave: 1 vid frame (40 ms), preload=504
Audio frames: Split across interleaves
[JUNK] VirtualDub
[JUNK] MPEG2 build 24586/release
[ISFT] VirtualDubMod 1.5.4.1 (build 2178/release)
[USER] XviD0050
So I assume Xvid was used for this file. Considering that what would you reccomend me to do in order to view this file and be able to edit on PRE8?

Robohelp 10 crashes when updating linked Frame 11 files

I recently upgraded from TCS 3 to 4 and this project worked fine before the upgrade.
Whenever I update the book linked to RoboHelp, it crashes and I receive an "Adobe RoboHelp 10 has stopped working message" (below).
If I update individual files in the book, RoboHelp does not seem to have a problem with files that do not have many linked images.
I'm running Windows 7 Enterprise. 8 GB RAM. The source control for the Frame files is Documentum, so they reside locally on my PC at C:\Users\user.name\AppData\Roaming\Adobe\FrameMaker\Documentum\<connection_name>\<reposit ory>\

Hello,
TCS4 with Acrobat update to XI, unstructured FM. Win8.
I am having the same problem, and I am very concerned. This is definitely a new problem so something has changed recently - perhaps an Acrobat update?
I have been linking my FM books to RH and happily converting graphics through distiller for several years now. The last time I successfully did this was in February, with no problems. Now, I am starting a new round of help releases. As soon as RH encounters a chapter with graphics to convert, it crashes. This is not a problem with a particular graphic or particular FM chapter. It happens on any FM chapter with a graphic. Many of my graphics have callouts so it's possible that it occurs due to this, but it wasn't a problem before.
Things I've tried:
Started a new RH project.
Changed the image conversion to not use Distiller. This resulted in no problems whatsoever, but the graphics quality is not acceptable.
Converted a chapter with no graphics. No crashing.
Tried using Distiller, but created .gif instead of .png. Still resulted in an immediate crash.
Deleted the CPD file after each crash.
Observed Distiller and looked for error messages in the log. There are none. It looks like 2 -3 graphics are converting before the crash. I went to the temp folder where these are being distilled but could not really make sense of what's there... there are 2-3 PDFs of my images in each temp folder. There's a temp folder for each time I crashed.
OK I admit I am really worried about this new issue.
Alexandra

Display Format (Video) Frames problem

The timecode display when set to frames is not working correctly in CS4.
When you specify Frames instead of timecode it does not change.
Project Settings>General
Video | Display Format | Frames
Can others reproduce this? Seems like a bug to us.
Link to reference in help:
http://help.adobe.com/en_US/PremierePro/4.0/WS3E67AF4C-B2A2-4f04-90B4-F8CCFB74B144.html

>Is there an official problem area that I can report this
FAQ:How/Where do I report a bug?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Frames problem

Hello! My problem is that a link from a flash button in the
upper frame opens in a new window instead of going into the main
frame. The target of the flash is the name of the main frame.
Please suggest any proposals. If there is need I'll post the code,
but please explain me which code exactly. Thank you all in
advance.

Also i'd like to in some cases make the class (frame) being called the only one focusable until the operations arre carried out on it,Typically an application only has one JFrame. When you need to collect additional information or do additional processing you would use a JDialog (not a JFrame). When you create the JDialog you would make it a modal dialog (read the API). This means that you must close the dialog before focus will go back to your main JFrame.

Premiere to AE Dynamic Link CinemaDNG Problem

Hi Guys,
I'm having a problem when I dynamic link from premiere to after effects. I have raw shot on a BMCC and edited it in Premiere Pro. It's for a greenscreen with alot of effects. So I selected all the clips in my timeline and selected make this a AE comp. The adobe camera raw settings pop up and I set the colour and it all seems fine until..... I go to play the clip! I can see it's only imported 1 frame of the entire clip. I'm not sure how to work around this problem because I want to keep my edits but also have access to indivdual clips in AE. HELP! What am I doing wrong? I tried reloading the clips in AE but it loses all the edit points.

CinemaDNG sequence per se can be easily imported into AE. The issue is the OP has edited PrPro project with improperly stored data in .prproj file, which reference each CinemaDNG sequence as a single frame because of importer implementation.
He can not relink CinemaDNG sequence to another image sequence because of long standing PrPro inability to relink a footage to an image sequence. However, he can replace them with a footage in MOV or AVI container, be it a proxy or an intermediate, and then easily replace all those proxies or intermediates with original CinemaDNG sequences in AE retaining proper In and Out points.
NB: Prior to relinking CinemaDNG sequences to MOVs or AVIs inside PrPro project they have to be interpretted as having proper frame rate, not their default 1 fps assinged on importing.

JavaScript Links & Frames issue

Hi,
I have a DHTML Folder Tree, also known as a TreeView. That is, an expandable/collapsible tree of links.
In a frame-less layout everything works great. In a frame-based layout, it doesn't work on Safari/Konqueror.
There are two frames: the left frame contains the tree control; when you click on a link in the tree, the right frame is the target for the links in the tree.
The tree mechanism itself works fine. But there is a problem with the links. What happens on Safari/Konqueror with the frame-based layout is the first link works fine, but all links after that do not. That is, the first click loads a picture on the right frame, but when I click on any other links after that, the target frame is not updated.
Any ideas/suggestions/help would be much appreciated.
Cheers,
FF.

More information...
The Web page in question is:
http://www.treeview.net/tv/demo/demoFrameset.html
Note that these links are HTML, constructed using JavaScript. Here are interesting/relevant portions of the code:
// The code that constructs the href for the link:
linkString = "href=\""this.link"\" target=\""this.target"\" onClick=\"clickOnLink('"this.getID()"\', '"this.link+"','"+this.target"');return false;\"";
// The clickOnLink function
clickOnLink(clickedId, target, windowName) {
highlightObjLink(findObj(clickedId));
if (isLinked(target)) {
window.open(target,windowName);

MDS 9148 NX-OS 5.0(1a) Link failure Problem

Hi all,
I'm finding the following problem on my 2 MDS9148 switches.
2012 May 7 14:15:54 SAN01 %PORT-4-IF_SFP_WARNING: Interface fc1/7, Low Rx Power Warning BK01
2012 May 7 14:15:54 SAN01 %PORT-3-IF_SFP_7ALARM: Interface fc1/7, Low Rx Power Alarm BK01
And finally the FC interfaces go down. We checked the fiber cable to be sure that it is not a physical issue and the fiber cables are ok.
This happens with fc1/1, 1/3, 1/4 and several more.
Does anyone have an idea why this could be happening and what the error might be?
Your help will be much appreciated.
Thanks in advance,
Kind regards

Krun_shah
Seems that the other post has not a good layout.
Here it is: THe error:
2012 Sep 4 09:34:43 SAN-01 %PORT-2-IF_DOWN_LINK_FAILURE: %$VSAN 2%$ Interface fc1/1 is down (Link failure) LTO3
2012 Sep 4 09:34:44 SAN-01 %PORT-2-IF_DOWN_LINK_FAILURE: %$VSAN 2%$ Interface fc1/1 is down (Link failure) LTO3
2012 Sep 4 09:34:44 SAN-01 %PORT-2-IF_DOWN_LINK_FAILURE: %$VSAN 2%$ Interface fc1/5 is down (Link failure) LTO3
2012 Sep 4 09:35:31 SAN-01 %PORT-2-IF_DOWN_LINK_FAILURE: %$VSAN 2%$ Interface fc1/5 is down (Link failure) LTO3
2012 Sep 4 09:35:31 SAN-01 %PORT-5-IF_UP: %$VSAN 2%$ Interface fc1/1 is up in mode FL LTO3
2012 Sep 4 09:35:33 SAN-01 %PORT-5-IF_UP: %$VSAN 2%$ Interface fc1/5 is up in mode FL LTO3
2012 Sep 4 09:36:57 SAN-01 %PORT-4-IF_SFP_WARNING: Interface fc1/1, Low Rx Power Warning LTO3
2012 Sep 4 09:36:57 SAN-01 %PORT-4-IF_SFP_WARNING: Interface fc1/5, Low Rx Power Warning LTO3
2012 Sep 4 09:36:57 SAN-01 %PORT-3-IF_SFP_ALARM: Interface fc1/5, Low Rx Power Alarm LTO3
2012 Sep 4 09:46:58 SAN-01 %PORT-4-IF_SFP_WARNING: Interface fc1/1, Low Rx Power Warning cleared LTO3
2012 Sep 4 09:46:58 SAN-01 %PORT-3-IF_SFP_ALARM: Interface fc1/1, Low Rx Power Alarm cleared LTO3
2012 Sep 4 09:46:58 SAN-01 %PORT-4-IF_SFP_WARNING: Interface fc1/5, Low Rx Power Warning cleared LTO3
2012 Sep 4 09:46:58 SAN-01 %PORT-3-IF_SFP_ALARM: Interface fc1/5, Low Rx Power Alarm cleared
The fc1/1 and fc1/5 ports are experiencing the same problem as fc1/7 so I am pasting the show command output for those ports.
The fc1/1 and fc1/5 are not ISL ports I believe. You mean ISL as the trunking protocol, right?
Here it is the config for both ports.
interface fc1/1
switchport description LTO3
port-license acquire
no shutdown
interface fc1/5
switchport description LTO3
port-license acquire
no shutdown
WE have connected to those ports a drive that is used by a backup robot.
Here are the ouput for the show commands you asked.
sh int fc1/1 counters details
fc1/1
      4417757720 frames, 5859624695228 bytes received
      0 class-2 frames, 0 bytes received
      0 class-2 discards
      0 F_BSY frames, 0 F_RJT frames
          generated against class-2 frames
      0 port reject frames
      4417757720 class-3 frames, 5859624695228 bytes received
      0 class-f frames, 0 bytes received
      0 discards, 0 errors received
      0 discards, 117 errors transmitted
      100604456388 frames, 207142346384892 bytes transmitted
      0 class-2 frames, 0 bytes transmitted
      100604456388 class-3 frames, 207142346384892 bytes transmitted
      0 class-3 frames discarded
      0 class-f frames, 0 bytes transmitted
      0 class-f frames discarded
      0 multicast packets received, 0 transmitted
      0 broadcast packets received, 0 transmitted
      4417756190 unicast packets received, 100611090558 transmitted
      85 link failures, 82 sync losses,       77 signal losses
      0 primitive sequence protocol errors
      163601 invalid transmission words
      0 invalid CRCs, 0 Delimiter Errors
      0 address identifier errors
      0 link reset protocol errors received
      0 link reset protocol errors transmitted
      0 Offline Sequence errors received
      173 Offline Sequence errors transmitted
      0 frames received that are shorter than
          the minimum allowable frame length
          regardless of the CRC error
      0 frames received that are longer than
          the maximum frame length and also have a
          CRC error
      0 waits due to lack of transmit credits
      0 frames received with length greater
          than what was agreed to in FLOGI/PLOGI
      0 frames received with length less than
          the minimum indicated by the frame header
      0 link reset responses received
      0 link reset responses transmitted
      0 non-operational sequences received
      88 non-operational sequences transmitted
      0 fragmented frames received
      0 frames received with EOF aborts
      0 unknown class frames received
      0 8b10b disparity errors
      117 frames discarded
      0 Exchange Link Parameters switch fabric
          internal link service request failures
      110542953 transitions of BB credit out of zero state
      0 transitions of BB credit to zero state
      0 Enhanced Inter Switch Link (EISL) frames
          discarded
      0 framing errors
      0 F8 type LIP sequence errors received
      0 F8 type LIP sequence errors issued
      193 Non F8 type LIP sequence errors received
      173 Non F8 type LIP sequence errors issued
SAN-01# sh int fc 1/1 transceiver details
fc1/1 sfp is present
    Name is CISCO-AVAGO
    Manufacturer's part number is SFBR-5780APZ-CS2
    Revision is G2.3
    Serial number is AGD143284VM
    FC Transmitter type is short wave laser w/o OFC (SN)
    FC Transmitter supports short distance link length
    Transmission medium is multimode laser with 62.5 um aperture (M6)
    Supported speeds are - Min speed: 2000 Mb/s, Max speed: 8000 Mb/s
    Nominal bit rate is 8500 Mb/s
    Link length supported for 50/125mm fiber is 50 m
    Link length supported for 62.5/125mm fiber is 20 m
    Cisco extended id is unknown (0x0)
    No tx fault, no rx loss, in sync state, diagnostic monitoring type is 0x68
    SFP Diagnostics Information:
                                     Alarms                  Warnings
                                High        Low         High          Low
Temperature 34.66 C         75.00 C     -5.00 C     70.00 C        0.00 C
Voltage       3.27 V          3.63 V      2.97 V      3.46 V        3.13 V
Current       7.09 mA         8.50 mA     2.00 mA     8.50 mA       2.00 mA
Tx Power     -2.91 dBm        1.70 dBm -14.00 dBm   -1.30 dBm    -10.00 dBm
Rx Power     -6.76 dBm        3.00 dBm -17.30 dBm    0.00 dBm    -13.30 dBm
Transmit Fault Count = 0
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning
SAN-01# sh int fc1/5 counters details
fc1/5
      4486944237 frames, 5759105445416 bytes received
      0 class-2 frames, 0 bytes received
      0 class-2 discards
      0 F_BSY frames, 0 F_RJT frames
          generated against class-2 frames
      0 port reject frames
      4486944237 class-3 frames, 5759105445416 bytes received
      0 class-f frames, 0 bytes received
      0 discards, 0 errors received
      0 discards, 2 errors transmitted
      108664953452 frames, 223758725747704 bytes transmitted
      0 class-2 frames, 0 bytes transmitted
      108664953452 class-3 frames, 223758725747704 bytes transmitted
      0 class-3 frames discarded
      0 class-f frames, 0 bytes transmitted
      0 class-f frames discarded
      0 multicast packets received, 0 transmitted
      0 broadcast packets received, 0 transmitted
      4486942834 unicast packets received, 108671587794 transmitted
      63 link failures, 62 sync losses,       6 signal losses
      0 primitive sequence protocol errors
      124 invalid transmission words
      0 invalid CRCs, 0 Delimiter Errors
      0 address identifier errors
      0 link reset protocol errors received
      0 link reset protocol errors transmitted
      0 Offline Sequence errors received
      129 Offline Sequence errors transmitted
      0 frames received that are shorter than
          the minimum allowable frame length
          regardless of the CRC error
      0 frames received that are longer than
          the maximum frame length and also have a
          CRC error
      0 waits due to lack of transmit credits
      0 frames received with length greater
          than what was agreed to in FLOGI/PLOGI
      0 frames received with length less than
          the minimum indicated by the frame header
      0 link reset responses received
      0 link reset responses transmitted
      0 non-operational sequences received
      66 non-operational sequences transmitted
      0 fragmented frames received
      0 frames received with EOF aborts
      0 unknown class frames received
      0 8b10b disparity errors
      2 frames discarded
      0 Exchange Link Parameters switch fabric
          internal link service request failures
      294071266 transitions of BB credit out of zero state
      0 transitions of BB credit to zero state
      0 Enhanced Inter Switch Link (EISL) frames
          discarded
      0 framing errors
      0 F8 type LIP sequence errors received
      0 F8 type LIP sequence errors issued
      134 Non F8 type LIP sequence errors received
      129 Non F8 type LIP sequence errors issued
SAN-01# sh int fc 1/5 transceiver details
fc1/5 sfp is present
    Name is CISCO-AVAGO
    Manufacturer's part number is SFBR-5780APZ-CS2
    Revision is G2.3
    Serial number is AGD143284VS
    FC Transmitter type is short wave laser w/o OFC (SN)
    FC Transmitter supports short distance link length
    Transmission medium is multimode laser with 62.5 um aperture (M6)
    Supported speeds are - Min speed: 2000 Mb/s, Max speed: 8000 Mb/s
    Nominal bit rate is 8500 Mb/s
    Link length supported for 50/125mm fiber is 50 m
    Link length supported for 62.5/125mm fiber is 20 m
    Cisco extended id is unknown (0x0)
    No tx fault, no rx loss, in sync state, diagnostic monitoring type is 0x68
    SFP Diagnostics Information:
                                     Alarms                  Warnings
                                High        Low         High          Low
Temperature 36.53 C         75.00 C     -5.00 C     70.00 C        0.00 C
Voltage       3.26 V          3.63 V      2.97 V      3.46 V        3.13 V
Current       7.08 mA         8.50 mA     2.00 mA     8.50 mA       2.00 mA
Tx Power     -2.72 dBm        1.70 dBm -14.00 dBm   -1.30 dBm    -10.00 dBm
Rx Power     -3.94 dBm        3.00 dBm -17.30 dBm    0.00 dBm    -13.30 dBm
Transmit Fault Count = 0
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning
thanks in advance,
Fernando

Remote Delta link setup problem with Bean / Access Service

Hello,
I am trying to setup Remote Delta Link (RDL) between two portals. (Both portals same version - EP 7.0 EHP1 SP 05 - are in the same domain)
I already have the Remote Role Assignment working without any issues.
The following have been done successfully:
1. Same user repository has been setup for both the portals
2. Setup trust between producer and consumer (SSO working fine)
3. Producer added and registered succesfully on consumer
4. Permissions setup on producer and consumer
4. pcd_service user with required UME actions setup
I am able to see all the remote content in the Consumer portal.
When I try to copy the remote content and paste it as local content, I am getting the following error:
Could not create remote delta link to object 'page id'. Could not connect to the remote portal. The remote portal may be down, there may be a network problem, or your connection settings to the remote portal may be configured incorrectly.
After increasing the log severity, I am able to see the following in Default Trace:
com.sap.portal.fpn.transport.Trying to lookup access service (P4-RMI) for connecting to producer 'ess_int' with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
com.sap.portal.fpn.transport.Unable to lookup access service (P4-RMI) with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
AbstractAdvancedOperation.handleDirOperationException
[EXCEPTION]
com.sap.portal.pcm.admin.exceptions.DirOperationFailedException: Could not retrieve the bean / access service to connect with producer
Could not retrieve the bean / access service to connect with producer
Like you can see above, there is some bean / access service which is not retrieved successfully. I am not sure if this is a permission problem on the consumer.
I have checked that the P4 ports are configured correctly (standard - not changed) and I am able to telnet from producer to consumer (and vice versa) on the P4 port.
I am stuck at this point and am not able to find any information on this.
I would really appreciate if some one can point me in the right direction.
Thank you for reading.
- Raj

Hi Raj,
Please check your config of the P4 port on the producer. Is it really 50004 (check SystemInfo of the producer)?
I do think there's a problem with the P4 communication since RDL requires P4 connection.
Do you have load balanced consumer-producer connection? Please refer to this blog for further details
Little known ways to create a load balanced Consumer Producer connection in a FPN scenario
Regards,
Dao

Purch. Req. to COPA link causing problems for PO Goods Receipt

A problem just started occuring in the past week and a half where our Warehouse staff could not receive in goods due to error: "Complete PA transfer structure FI".
What I have found out is that when a Purch. Req. is created with Account Assignment "F" (Internal Order - GR), the corresponding EKBN segment is being created with a Profitability Analysis segment ID (EKBN-PAOBJNR) and the Functional Location field (EKBN-FKBER) is left blank.
Previously, the PA Seg ID has been blank and the Functional Location fields has always contained a value.
This COPA link issue is causing havoc in our Receiving department and I can not find if there was a configurator's transport that caused it (no is fessing up to anything), or if a customer in the MM system set some type of flag -or- is some G/L Account was set up incorrectly that is causing a link to COPA when the PR eventually gets received into inventory.
Help.

I have checked the KEI2 before and for our Assignment 30 we have "Other Costs", and in the "Source" for the Assignment Lines for #30, we have defined a Group (OTHERCOSTS).
This group or set contains the Cost elements which we now have to add to, every time we come across a new cost element or G/L account that is assigned to a PO with line items of Account Assignment Category "F".
The problem is that approximately 3 weeks ago if a PO was created with type "F" line items and the G/L account (cost element) in the Account Assignment portion of the PO was not one that was in the OTHERCOSTS Group/Set ... we had no problem doing the Goods Receipt of the PO -AND- a PA segment was created as well.
For now, we are just adding any new Cost elements to our OTHERCOSTS set if the need arises.

Command link navigation problems in IE but not firefox

Hi,
I've developed an application using JSF and SDO. I have several pages where the user is displayed data from the database and pages where the user can add data , edit data and delete data.
Each page has a jsp fragment contained in the page. This is based on faces and is the naviation menu. Each link in the menu is a command link and has navigation rules which are global. Now the problem I get is that when I sometimes nvaigate between pages using the navigation or command links in a page the page just refreshes and displays the same page again. But if I keep trying to click the link again then after a few attempts the link goes to the page i've requested. I've added system outs on the actions for the links to see if they are getting called when the page just refreshes. The answer is no as the system out line is never printed unless the action of the link is actually executed.
Now the problem is that this only occurs in ie and NOT in firefox. I'm really confused now!!
Here is some techinical details to help narrow down my situation:
I'm using wsad 5.1.2 which has faces 1.0, ie 6, firefox 1.0.3.
Any help would be appreciated!!

doh! i've solved this problem now....well for now its working perfectly but i'll have to do a bit more testing.
For anyone that has this problem here was my solution...
- In IE i went to tools > general tab > settings
from this menu choose check for newer versions of stored pages to automatically. I previously had every visit to the page.
This seems to have fixed my problem and the reason why it worked in firefox was because the settings for caching were different.

Linking Frames Problem

Similar Messages

Maybe you are looking for