Linking from individual photos on photo page to new page

On a photo page is it somehow possible to make some of the photo titles be links to new pages, but still let the page be a slideshow like normal? And how would you do it? Thanks,

I guess you could still have a slideshow of the various photo album thumbnails this way.... What you are asking for, I believe, is a photo index page. You can make it out of the Photo template, except clicking on the thumbnail photos actually brings you to a new Photo page, like a link to the real photo album page. Here are some directions written up by Michael Wong....
http://www.rowan-cottage.co.uk/Site/Graphics%20Tips.html
Look under the section that says "How to Create a Photo Album Index." Good luck!

Similar Messages

  • Setting up a link from a grid to another page

    All,
    Is there a way to create a link from a grid to another page?
    Thanks.

    You will need to find a tutorial for a drop down or cascading menu.  What you should try is to Google "AS2 drop down menu tutorial" and "AS2 cascading menu tutorial".  You may not find exactly what you are describing, but will hopefully find something you can figure out how to adapt to meet your goals.

  • Can you link from Word to a specific page in PDF without a webserver?

    I am trying to add a link within Word that opens a specific PDF file and goes to a particular page within the PDF.  Is there a way to do this without a webserver?

    I have a similar problem I would like to solve. I am also running Word 2003, Windows XP and Acrobat Professional 7.0.
    I can create a hyperlink in a word document to open a separate PDF file.
    I can then use PDF Maker to convert the word document to PDF.
    No problem.
    When I click on the new link in the PDF document it opens the separate file in the same window and the original PDF file is closed.
    I do not want the original file to close.
    When I set up a new link from within Acrobat then I get the option to "Open in new window". This link works the way that I want.
    As there are multiple hyperlinks in the word document, I will need to recreate new links everytime I modify the Word document. This is very time consuming
    Question - how do I get the automatically created link to open in a new window?
    Thanks in advance

  • Linking from SWF files to web pages

    Hi
    I'm using the latest Flash CS3.
    Basically, I want to link from the SWF file to a webpage.
    Here's what I've done so far.
    Created the FLA file, imported the quicktime movie into it
    etc etc.
    I've then added a behaviour by clicking on the inserted
    movie, then BEHAVIORS >WEB> GO TO WEB PAGE> and filled in
    all the relevant text for the link.
    Then I have saved the file. Then I have published then OK.
    I have embeded the SWF file in a web page, but when I click
    on the movie, it shows there's a link, but it won't link to the
    webpage.
    What am I doing wrong? I dont understand.
    Can't get my head around this!
    When I go to the FLA file, then publish preview > flash,
    and the movie appears on its own, the link works... but the SWF
    file doesn't.
    Basically what do I need to do to make it work.
    The coding I am using in my web-page is:
    <p align="center"><center>
    <object width="165" height="100">
    <param name="movie" value="
    http://homovision.media7london.com/wordpress/Newcontribute.swf"
    />
    <embed src="
    http://homovision.media7london.com/wordpress/Newcontribute.swf"
    width="165" height="100" />
    </object>
    </p></center>
    The movie plays, the "link hand" appears above it, but when
    it is clicked nothign happens.
    Any help would be greatly appreciated.
    Simon

    Did you inport to the stage and put a stop (action script) on
    the frame?

  • Links from pinned tab do not open in new tab, why?

    When I open a link from a pinned tab the link opens in the pinned tab not in a new tab. This just started happening did I somehow turn off or on something? How do I get the tabs working the way they should?

    My mouse doesn't have a middle button. Interesting that a pinned tab isn't protected unless you have an extension because until two days ago my pinned tabs were protected. Am I the only one who could do this?
    thanks for trying to help.

  • Links from old threads are not parsing in new "Communities" Forum - Fail!

    As much as I am yet to be impressed with the new Communities look and feel this is functional aspect which need to be patched by Apple, and fast.
    Old threads used the [Anchor text | uri link] syntax to define hyperlinked text. The new Communittees site is not parsing it correctly so old threads are full of this syntax in plain text — NOT PARSED to create links.
    Everybody in QA and beta testing on this Forum Site at Apple needs a rocket under there ares for this very basic miss.(presumably it was made at Apple although I know RADAR is outside-ware)

    [text | uri ] not parsed:
    https://discussions.apple.com/message/13304539#13304539
    Ridiculous cascade threading because of massive changes to the style of boards. Column's of text in this thread are now down to as little as 3 char wide:
    https://discussions.apple.com/message/13333695#13333695
    Apple this really *****. Totally apart from the look and feel of Communities which I'm reserving judgement on until I give a fair trial (but so far that ***** even more than the parsing junk). Why everything except the box I'm typing in has to be oversized to Duplo scale (are kindergarten kids using Communities already?) semi-bold font-face I can't guess.

  • I have two related keyword problems.  Some keywords get "broadcast" to every photo in an event.  It's almost impossible to delete these keywords from individual photos.  I select the keyword, hit delete and it reappears after a few seconds.

    I have two related problems with keywords in iphoto 11.  Sometimes, keywords get magically "broadcast" to every photo in an event or album.  It's difficult to delete these keywords.  If I select one and try to delete it it vanishes.  About half the time, it reappears again either in a couple of seconds or after I go to another photo and then return to the previous one.  When thios happens, I need to delete the keyword two or more times before it actually vanishes.  With several hundred photos in an event that all have a bad keyword, this is a tedious process.  I've tried rebuilding the library once, but with only the first (I think) option checked on the rebuild.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • How do I remove Ken Burns effect from individual photos?

    The instructions say to " In the Photo Settings window, deselect the Ken Burns effect checkbox and then click apply". My interface shows the word "update" instead of "apply" which has worked when I change other settings such as the length of time a photo is displayed. However every time I deselect KB...it comes back! I have also tried to constantly save the project, trying to save the deselect process.
    Has anyone an idea? BTW the KB effect is very poor for most vertical pictures as it will cut off the top of the photo.
    powerbook G4 Mac OS X (10.4.9) iMovie 6.0.3 version

    • Yes, the Photo Settings window says Update instead
    of Apply because you are updating an existing clip,
    not importing a new one.
    However every time I deselect KB...it comes back!
    • Not sure exactly what you mean there. Do you mean
    that in spite of unchecking the Ken Burns checkbox
    the Updated clip doesn't change? It still has the Ken
    Burns effect?
    YES - see solution I found below.
    If so, it sounds like iMovie may be failing to save
    the updated clip to disk. That can occur if the
    project resides on an external disk that uses the
    wrong disk format. iMovie requires the Mac OS
    Extended disk format. To check yours, see this:
    http://discussions.apple.com/message.jspa?messageID=41
    76921#4176921
    I had our office software person check this out.
    BTW the KB effect is very poor for most vertical
    pictures as it will cut off the top of the photo.
    • The Ken Burns effect can't read our minds. It only
    does what we tell it to do. For photos that have a
    portrait orientation it's normal to adjust the
    zoom/pan so the rendered clip stays within the photo.
    Note that it's possible to drag the photo in the
    Preview window to adjust both the Start and End
    points. So for a tall photo you may want to zoom/pan
    up-or-down instead of side-to-side.
    Note too that the settings in the Photo Settings
    window always accept those settings of the last photo
    we imported, updated or clip clicked on. So once
    you've imported a tall photo with the Ken Burns
    settings you like, you can easily apply those
    settings for another photo. Just click on that
    previously-rendered tall clip in the Timeline before
    importing your next tall photo.
    Karl
    Karl,
    Thank your for your input and in the last couple of days I have been able to produce the iMovie. But I now have another question about burning it.
    Let me point out that I was able to deal with the Ken Burns issues by deleting the photos I wanted to change and replacing with new photos and using your tips + the help menu on "adding motion to your photos" to zooming right / left / vertically (which was very helpful).
    Now that I have my project I cannot burn it as I get the following:there is not enough space to encode the aspects and in the pull down: "iDVD needs 2.350 GB of disk space to encode the remaining assets, but only 1.231 GB are available" I tried to cut down the files by deleting 5 chapters thus reducing the menu to one page showing chapters. I also re-saved the project with a new name.
    BTW - I did burn it once but needed to fix it as the opening menu didn't have sound and I saw some other small photo details I wanted to fix. This version had 11 chapters on 2 menu pages with photos in the background. Essentially all I did was add a few more photos in motion and add the sound. That is why I thought maybe it was too much and removed the chapters saving one remaining page with music. I also do not have it on wide screen format as that uses more memory.
    Can you help me with this? I don't understand why I'm getting the same message no matter what I do.
    Many thanks,
    Rozy

  • No working mailto: links on published photo page

    hi! i have this page:
    http://web.mac.com/cbalu/iWeb/gyuru/D7736C9A-22C5-4C2F-B7DB-31C3CDEB0690.html
    now. have a lot of mail addresses on it. but when it published to my mac account, it converts to picture all the tags, and there are no working mailto: command in the text. before this page was on another theme, but on this it just doesbt work. can anybody tell me, how to and what to change, to force iweb to keep the texts in text? my english is poor, so im just hoping, its understandable!
    thanx in advance...

    ok. so. i generated a new page, and rebulided only one picture, and plaintexted copy-pasted only one text:
    http://web.mac.com/cbalu/iWeb/gyuru/probaoldal.html
    it works. so i have to rebuild the whole part of my site.
    so the end of this, this is another iweb bug, if you copy-paste photos with captions, it converts to pics. so i rebuild now all... ehhh...
    anyhow thanx to all of You for trying to help... have to hurry, couse its night here, nad wanted to sleep...

  • Link from a portlet to a page

    I've made a JSP portlet that contains a table with an overview. When you want to see the details of a subject, you've to click on a link.Then there should be opened a new window with a another JSP (contains the details). The window has to contain a new page (which will contain the new JSP portlet)
    I've tried to do this with the following code :
    <a title="Click here to view the details of this call"
    target="_blank"
    href="<%=HttpPortletRendererUtil.parameterizeLink( request,
    PortletRendererUtil.PAGE_LINK,
    HttpPortletRendererUtil.portletParameter(request, "next_page") +
    "=open_call_detailsView_Browse.jsp&id="+
    currentCall.getAttribute("INQUIRY_ID")) %>">
    I give one parameter with the URL.
    But this code opens a new window with the previous page with the new JSP portlet on the place of the old JSP-portlet(this code is derived from the multipage-sample).
    So, what has to come instead of PAGE_LINK ?
    How can I find the String ?
    Thanks,
    Bart

    Hi Bart,
    The scenario you've described works exactly as it should.
    If you want to display your second JSP on an entirely new portal page, you need to create that page first and then refer to it. Try to define the URL of that second page, and change the PortletRendererUtil.PAGE_LINK in the parameterizeLink() method accordingly. If that page contains a multipage like portlet, keep the next_page parameter. Otherwise you won't need it.
    If you want to display your second JSP on its own, not on a portal page, you have to make your JSP available from the browser directly and point the link to it (without the next_page parameter).
    Hope this helps.
    Regards
    Peter

  • I have never owned an apple thus all my data is windows based.  i want to buy the macbook air.  will i be able to transfer my windows data from quicken, photos, etc to new macbook?

    can i buy an apple macbook air and trasfer my windows based software?? i use quicken, and microsoft photos, etc???

    Yes and No. You cannot run Windows software on a Mac with OS X. But you can run Windows on a Mac and use your Windows software by booting the Mac into Windows directly or use virtualization software to run Windows:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    6. Last is Q.  Q is a freeware emulator that is compatible with Intel Macs.  It is much slower than the virtualization software, Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • I recently updated to version 12. Now when i click on a web link from outlook 2010 the web page opens in an existing tab. I want it to open in a new tab.

    I recently updated to the latest version of FF (12). Now when i try to open a URL from an email INSIDE Outlook 2010 it opens in what ever tab FF has opened. I want to be able to open the URL in a new tab. Using the CTRL feature does not work from inside Outlook.

    Hi,
    Try this:
    Preferences > Tabs > Open links that open in a new window in: New Tab

  • LInks from iWork in Main Discussion Page

    Today's update resulted in incorrect labels on the iWork links on the main discussions page.
    Jerry

    Hi Again Jerry,
    Is this how it should look?
    iWork
    Numbers
    Keynote
    Pages
    ali b

  • Safari cannot open the page because the server cannot be found. This is the message I get many times when I try to open a webpage or click on a link from facebook or email. Pages don't open for a while in spite of refreshing and suddenly it works.

    During this problem, the internet works perfectly fine because my laptop can access every page smoothly. Please do let me know why this happens every so often.

    That's really annoying..
    a) Reset network settings (Settings > General > Reset.)
    b) May I ask you to tell me DSN.. is it spefied by your internet provider ?

  • Is there a way to set links from the book title / cover page?

    Mavens!
    I am attempting to design an interactive decision tool with iBooks Author and would like to set some hyperlinks from the actual book cover to avoid the linear book experience.
    Is there a way to do this?
    The widget inspector greys out when you select "Book Title"  in the side bar.
    Ciao
    Russ

    I found it thank you. Need to highlight name then press delete button

Maybe you are looking for