Linking Issue on AIX Machine

Hi All,
I am porting C code from LINUX to AIX Machine. I am using a xlc compiler to compile my C code. I was successfully able to compile the code and generate 64 bit XCOFF format object modules.
But, i am stuck one liking issue which i am unable to resolve.
The error message thrown by the linker is like this
ld: 0711-715 ERROR: File /ade/aime_aixtesting/oracle/lib/stubs/libdl.so cannot be processed.
The file must be an object file, an import file, or an archive.
gmake: *** [ade/aime_aixtesting/pfcore/addev/bin/adpatchnew] Error 8
When i run "file" command on the file libdl.so i get
../oracle/lib/stubs/libdl.so: ELF 32-bit LSB version 1 shared obj 80386
The RDBMS Lable from which this libdl.so is picked is
/ade_autofs/ade_release_unix/RDBMS_11.1.0_AIX.PPC64.rdd/RELEASE_11.1.0.7.0
Surpirsingly, this label which is meant for AIX, contains Shared objects with ELF format instead of XCOFF.
Can AIX understand ELF Format ? any inputs will be appreciated.
Thanks in Advance
Edited by: user767192 on Nov 9, 2009 1:22 PM

Hi!
I suppose you will find an answer to your question at AIX forums instead Oracle forum. Only a Linux C programmer can solve this.
Chao!

Similar Messages

Error in starting startInstGui.sh in AIX Machine

I am in the process of installing SAP in AIX Machine
I am getting the follwoing error when i start SAP installatble. Pls help
# /oracle/master/startInstGui.sh
Java Runtime found in PATH environment variable
Path: java
Start mode: gui (GUI only)
Connection parameters:
GUIServer host: localhost
GUIServer port: 21212
Starting...
The java class is not found: SDTGui
The contents of ENV file is as follows
TMP=/usr/sap/DBW/install/tmp
MAIL=/usr/spool/mail/root
LOCPATH=/usr/lib/nls/loc
LIB_PATH=/sapmnt/DBW/exe
USER=root
AUTHSTATE=compat
SAPINST_JRE_HOME=/usr/java14_64/jre
DISPLAY=192.168.79.139:0.0
SHELL=/usr/bin/ksh
ODMDIR=/etc/objrepos
JAVA_HOME=/usr/java14_64
HOME=/
TERM=xterm
MAILMSG=[YOU HAVE NEW MAIL]
PWD=/oracle/master
LD_LIBPATH=/sapmnt/DBW/exe
TZ=MST7
A__z=! LOGNAME
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
LIBPATH=/sapmnt/DBW/exe
The output of Java -fullversion is J2RE 1.4.2 AIX 5L I have logged in as user root to do the activities

Hi,
setup environment veriables correctly for java.. for example.
if using from root,
type: export JAVA_HOME=/.../.../.../ full location
type xhost + in seperate new terminal. should work.
also, use J2SDK 1.4.2.11 from below provided link...
http://java.sun.com/products/archive/j2se/1.4.2_11/index.html
Thanks,

GC installation on AIX machine

Hi Guys,
If any one has a good link or documents to install GC on AIX machine, Kindly forward it to me.

hi,
I have just completed an install on AIX5. let me know your details and I will forward it to you.
rgds
alan

Oracle client for an AIX machine

I need the client oracle 9.2.0.1 for an AIX machine.
But in the download page I don't see any link for the oracle client. There is only this
link:
http://www.oracle.com/technology/software/products/oracle9i/htdocs/aixsoft.html
Thera are 4 different download:
server_9201_AIX64_Disk1.cpio.gz (523,867,845 bytes)
server_9201_AIX64_Disk2.cpio.gz (629,432,127 bytes)
server_9201_AIX64_Disk3.cpio.gz (620,873,250 bytes)
server_9201_AIX64_Disk4.cpio.gz (221,310,704 bytes)
Is the client there?

Oracle doesn't offer the client as a separate download.
You need to download all 4 files (can not help it),
fire up the installer, and choose a Client install.
Hth
Sybrand Bakker
Senior Oracle DBA

IS AIX Machine I-series

hi ,
I have BW 7.0 system installed in AIX Machine(Oracle Database)
I am trying to make a source system connection from BW Server to a DB2 Database running on AS/400.
pls tell me whether AIX 5L is I-Series or not

Hi Balaji,
Check this link,
http://www-03.ibm.com/systems/i/os/aix/
Regards
Juan

Lion 10.7.4 issues with Virtual Machines

Hi,
I'm having lot of issues with virtual machines (both Parallels and VMWare)
since having update to lion 10.7.4.
I make myself:
If I switch on Mac OS a run any vitrual machine software
I can run Windows XP and Ubuntu at same time with no issue and very fluently.
But, if I switch on Mac OS and start using Eclipse, Safari 5.2 and other production stuff and
want to use vmware or paralles
they become unusable even if I quit all the tasks ans "purge" memory.
(eg: if i click start button on windows I have to wait seconds before the start menu pops up)
Any Idea?
I have MacBook Pro 13 Unibody mid 2009 with SSD Drive AND 4GB of RAM
and I had no such issues with Lion 10.7.3

alex_75 wrote:
As you wrote before, virtual mchines need big chunks of contigous RAM and
2,5 GB of free RAM wuold have enough ammount of such a RAM.
No, it wouldn't. 2.5 GB of free RAM could consist of 5 chunks of 500 MB of contiguous RAM, separated by RAM allocated by other processes.
Here is a hypothetical memory map. Assume a is application memory, o is operating system memory, and - is free memory.
boot:           oooo--------------
run app1:    ooooaao-----------
run app2:    ooooaaoaaaaaaoo---quit app1:   oooo---aaaaaaoo---
Maybe there is some issue in the way 10.7.4, in some perticolar situations, handle the process of freeing RAM.
What you can't accept, and I don't know why, is that before the update to 10.7.4 everithing was fine.
I don't know why you don't beleve me.
There is nothing in the 10.7.4 update description that mentions a re-write of the virtual memory system. http://support.apple.com/kb/HT5167
I just worte here to see if someone could give any advice to do further invesigations.
I know the price of upgrading RAM but I think that this would be a "microsoft like" solution
and I'm trying to find what service or task or whatever is creating this issue.
The only thing "Microsoft like" about buying more RAM is the fact that you need it to run your Microsoft operating systems. It has been this way as long as I can remember. I upgraded my MacBook to 4 GB RAM in 2008 just so I could run Windows more easily.
Perhaps you have your virtual memory settings too high. Depending on what you are doing in the VM, you may not need the default settings. XP will run low-intensity tasks with a 500 MB VM size. It will run just about anything in 1 GB. Linux should run fine in the same range too.

Slow program response, crashes when creating titles and dynamic link issues

Dear reader,
I am now trialling Adobe CC OSX with Premiere Pro and After Effects before deciding to subscribe but I am experiencing a lot of issues while working.
I am now working on an animation, but editing raw mxf files also gives crashes and slow responses/ program refreshes.
1) Slow mouse response
2) Slow program refresh while key framing visuals
3) Rendering in PP is extremely slow when AE is open in the background, when closing AE and re-initiate the render in PP it renders super fast
4) Crashes. When I overlay titles in my time line PP regularly crashes
5) Dynamic Link issues when working combined in AE and PP where file connections in the time line get lost when the AE project has too many sequences
I am curious to find out if other people are also experiencing these issues.
I am indecisive in getting the paid yearly plan or move to FCPX instead? Or should I get a new MacPro and is this model too old?
It worked fine 2 months ago, however I was still working on FCP7. After updating it is really bad working with it...
My system consist of:
MacPro mid-2010
OSX 10.9.5 (13F34) (new installation)
2x2,66Ghz 6-core Intel Xeon
24GB DDR3 ECC
Nvidia Quadro K5000, 4GB
2x PCIe SSD 1TB
2x HDD 3TB
2x HDD 2TB
Feedback is much appreciated! Best regards, Alexander

this does work for basic colour correction but not when trying to grade an entire suqence to achieve a specific style, applying a vingette or certain effects have to be done in after effects.
I want to try and get my whole sequence into after effects but preserve the edits and effects added in permier pro, is there any way to do this?
rich

Having trouble finding command prompt on AIX machine

I've successfully set up the server stats monitor to collect stats from iostat, vmstat etc. on a solaris box, but I'm having trouble getting the same information from an AIX machine using ssh.
-- I'm able to plink and login successfully to the aix machine
-- I've added the rsa2 key fingerprint to the registry of the windows machine where eload is installed.
Here's the top of the error message:
"Monitor configuration failure alert: monitor id=<ip address>:ds_ConsoleEngine_<ip address>_null_4.16 alert=<ip address>:ds_ConsoleEngine_<ip address>_null_4.16
(message id=console.configFailureAlert): Error returning value: host key fingerprint is....
<snip>
When I scan the rest of the error message, I can see that I was successfully logged in. I have a feeling that the command prompt wasn't found.
Any suggestions?
thanks.

Some additional info...
If I open a windows command prompt and use plink to login to the servers, this is what I get on solaris:
C:\Empirix\e-LoadDataCollector\bin>plink -ssh userid@solarismachine
returns a command prompt that looks like:
←]0;userid@solarismachine:~←[m←[m←[m←[Uuserid@solarismachine:~#> ←[K
The AIX box returns the following as the command prompt:
←]0;userid@aixmachine:~←[m←(B←[m←[m ←[Uuserid@aixmachine:~#> ←[K
I specified ~#> as the command prompt in eLoad.

Steps to create a SOLMAN key for NW2004s installation in AIX Machine

I have installed a SOLMAN in a Windows system
I need to install SAP NW200s in a AIX Machine.
Pls let me know the steps to create SOLMAN key for the installation.

Hi Balaji,
Before doing the steps said by Kanthi, you have register that system. Please follow the steps to do:
SMSY>Server>Create new system with assistant
Here you have to specify the details like System ID, Instance number etc.,
Then follow the steps:
System Landscape>other object>Specify the System ID(Which you have registered as i said in the provious step)-->select the generate key icon.
Hope it is helpful for you!!
Thanks & Regards,
Santhosh P

URL link issue

Hi
I am trying to create a link in my project to one of our
company intranet pages. I am using a click box and the URL - it
works fine in the Preview from Slide or next 5 slides, but when I
Preview in Web Browser it doesn't connect. Any suggestions as to
what might be the cause?
Thanks
Alex

Hi Alex
Hmmm, before investigating too deeply, I'm seeing some
familiarity here. For starters, the first link is to a .PDF. It's
been my experience that links to .PDF and Word .DOC files is "iffy"
at best. If you truly copied and pasted the links, I'd first try
removing the %20 from that first link. That's something the browser
normally inserts for a space. So instead of:
http://wlgweb/Corporat/HumanResources/Staff%20Conduct/EmailInternetUsagePolicy.pdf
Change it to read:
http://wlgweb/Corporat/HumanResources/Staff
Conduct/EmailInternetUsagePolicy.pdf
This may help and it may just be twisting in the wind. But
I'd try that first. I've often seen linking issues arise from that
silly %20. If possible, try to avoid that. I'm guessing here that
it may not be possible to control in your case as someone else may
be in control of those names. I've personally always opted to
either use a mix of upper/lower case names ( StaffConduct ) or
substitution of an underscore where spaces would normally occur (
Staff_Conduct ).
Other wierdness I've seen when linking to .PDF content:
* I personally had a different PDF reader (Foxit) installed
as my default. When Foxit was my default reader, PDF links refused
to open.
* I think this one is IE specific, but I've also seen it
where if I have a .PDF in the same folder and open that way, even
though the address is totally correct, the first time through, the
link fails. With the totally correct address showing in the address
bar. I simply refresh the page and bingo, the PDF shows! Go figure.
I really don't believe that this one is related to Captivate and
the way it calls the links. My gut tells me it's an IE thing. But I
have nothing to back me up on this.
I'm not sure what to say or suggest for the second link. I
tested it myself and it doesn't work, which tells me that either
the link is simply incorrect, or possibly it's located on an
intranet site.
Sincerely... Rick

Connection with sapinst get broken: Netweaver 2004 on aix machine

Hi
I am installing Netweaver 2004 on aix machine.
Java instance
database : maxdb
When I run sapinst , connection with it get broken in between.
Warnings and errors are as follows:
Current (soft) resource limit stacksize should be unlimited but it is 33554432. This may cause core dumps. Stop the installation set the limit to unlimited and start again.
WARNING 2007-05-08 13:19:56 [sapinst.cpp:124]
 CSapInst::initMessaging()
Current (soft) resource limit stacksize should be unlimited but it is 33554432. This may cause core dumps. Stop the installation set the limit to unlimited and start again.
Current (soft) resource limit datasize should be unlimited but it is 134217728. This may cause core dumps. Stop the installation set the limit to unlimited and start again.
WARNING 2007-05-08 13:19:56 [sapinst.cpp:139]
 CSapInst::initMessaging()
Current (soft) resource limit datasize should be unlimited but it is 134217728. This may cause core dumps. Stop the installation set the limit to unlimited and start again.
iauxsysex.c:317: child /tmp/sapinst_exe.631026.1178648293/sapinst (pid 753700) has crashed. Executable directory is /tmp/sapinst_exe.631026.1178648293. Contact Support.
iaextract.c:885: child has signaled an exec error. Keeping directory /tmp/sapinst_exe.631026.1178648293
What is the solution for this?

"Current (soft) resource limit stacksize should be unlimited but it is 33554432. This may cause core dumps. Stop the installation set the limit to unlimited and start again."
-> plz check your root values using SMITTY -> Security & Users -> Users -> Change/Show Characteristics of a User -> insert 'root' -> check parameter 'Soft STACK size' -> value should be '-1' (minus one)
GreetZ, AH

OCCI linking issue on HUPX11

Hello,
I am trying to make an OCCI9.2 sample application (occidesc) getting linking issue. I am don't think I have all the required Oracle library in my linking options. What am I missing?
My development environment: HUPX11, g++3.3.2, OCCI 9.2
===============================================
Link flags:
LDFLAGS = -L$(ORACLE_HOME)/lib32 \
-L$(ORACLE_HOME)/rdbms/lib32 \
-locci -locci9 -lclntsh \
`cat /u01/home/oracle/product/920/lib32/sysliblist`
========================================================
Linker errors:
/usr/ccs/bin/ld: Unsatisfied symbols:
typeinfo for oracle::occi::SQLException(first referenced in occidesc.o) (data)
oracle::occi::SQLException::SQLException[in-charge](oracle::occi::SQLException const&)(first referenced in occidesc.o) (code)
oracle::occi::Environment::createEnvironment(oracle::occi::Environment::Mode, void*, void* (*)(void*, unsigned long), void* (*)(void*, void*, unsigned long), void (*)(void*, void*))(first referenced in occidesc.o) (code)
oracle::occi::MetaData::getBoolean(oracle::occi::MetaData::AttrId) const(first referenced in occidesc.o) (code)
oracle::occi::MetaData::operator=(oracle::occi::MetaData const&)(first referenced in occidesc.o) (code)
oracle::occi::MetaData::getUInt(oracle::occi::MetaData::AttrId) const(first referenced in occidesc.o) (code)

I can't find any documentation referencing supported compiler for OCCI. Do you know of any from Oracle that support my environment?
Environment:
Oracle 9.2
HPUX B.11.00 A
Thanks,
Minh

JAVA CORE DUMP IN AIX MACHINES

Hi,
we got a java core dump in a AIX machine .
The excerpts of the core dump file is as below. Please can anyone suggest me what the core dump is all about and what i need to do to fix the problem :
NULL ------------------------------------------------------------------------
0SECTION XHPI subcomponent dump routine
NULL ==============================
1XHTIME Wed Sep 14 09:48:39 2005
1XHSIGRECV SIGILL received at 0xd2a36cfc in /iscp/node/lib/libmocj.a. Processing terminated.
1XHFULLVERSION J2RE 1.4.1 IBM AIX build ca1411ifx-20040810 (141SR3)
NULL
1XHCURRENTTHD Current Thread Details
NULL ----------------------
2XHCURRSYSTHD "Thread-16" sys_thread_t:0x36866028
3XHNATIVESTACK Native Stack
NULL ------------
3XHSTACKLINE at 0xD2A2FC40 in changeTimeOut__FP8__clienti
3XHSTACKLINE at 0xD2A36CFC in ismc_getUsersOnsite__FRCQ2_3std4listXTQ2_3std12basic_stringXTcTQ2_3std11char_traitsXTc_TQ2_3std9allocatorXTc__TQ2_3std9allocatorXTQ2_3std12basic_stringXTcTQ2_3std11char_traitsXTc_TQ2_3std9allocatorXTc____RQ2_3std4listXTQ2_3std12basic_stringXTcTQ2_3std11c
3XHSTACKLINE at 0xD2A4D8D0 in Java_com_telcordia_iscp_moc_libj_cgp_RPC_getUsersOnsite
3XHSTACKLINE at 0xD2821CE8 in mmipInvoke_O_O
3XHSTACKLINE at 0xD27E9370 in mmipExecuteJava
3XHSTACKLINE at 0xD27E1FB4 in xeRunJavaVarArgMethod
3XHSTACKLINE at 0xD27E2260 in xeRunDynamicMethod
3XHSTACKLINE at 0xD27CFFFC in threadRT0
3XHSTACKLINE at 0xD293CD10 in xmExecuteThread
3XHSTACKLINE at 0xD2940BF4 in threadStart
3XHSTACKLINE at 0xD2A75408 in _start
3XHSTACKLINE at 0xD005277C in pthreadbody
NULL
1XHOPENV Operating Environment
NULL ---------------------
2XHHOSTNAME Host : cu11sv01_if0:10.104.148.79
2XHOSLEVEL OS Level : AIX 5.2.0.0
2XHCPUS Processors -
3XHCPUARCH Architecture : POWER_PC (impl: unknown, ver: unknown)
3XHNUMCPUS How Many : 2
/jni
4XESTACKTRACE at java.lang.Object.wait(Native Method)
4XESTACKTRACE at java.lang.Object.wait(Object.java:438)
4XESTACKTRACE at com.inprise.vbroker.orb.ORB.run(ORB.java:261)
4XESTACKTRACE at com.telcordia.iscp.moc.server.config.ismc_config_mgr.main(ismc_config_mgr.java:125)
3XHNATIVESTACK Native Stack
NULL ------------
3XHSTACKLINE at 0xD005D814 in eventwait
3XHSTACKLINE at 0xD0069740 in condwait_local
3XHSTACKLINE at 0xD0069B98 in condwait
3XHSTACKLINE at 0xD006A6F8 in pthread_cond_wait
3XHSTACKLINE at 0xD2A7C8AC in condvarWait
3XHSTACKLINE at 0xD2A7B718 in sysMonitorWait
3XHSTACKLINE at 0xD286B1F8 in lkMonitorWait
3XHSTACKLINE at 0xD27E0234 in JVM_MonitorWait
3XHSTACKLINE at 0xD2832168 in sysInvokeNative
3XHSTACKLINE at 0xD281CE58 in mmipInvokeJniMethod
3XHSTACKLINE at 0xD27E9370 in mmipExecuteJava
3XHSTACKLINE at 0xD27E192C in xeRunJniMethod
3XHSTACKLINE at 0xD2819F58 in invokeJniMethod
3XHSTACKLINE at 0xD2813D4C in jni_CallStaticVoidMethod
NULL
NULL ----------------------------------------------------
2XMFULLTHDDUMP Full thread dump Classic VM (J2RE 1.4.1 IBM AIX build ca1411ifx-20040810 (141SR3), native threads):
3XMTHREADINFO "Thread-16" (TID:0x300E9E88, sys_thread_t:0x36866028, state:R, native ID:0xF37) prio=5
4XESTACKTRACE at com.telcordia.iscp.moc.libj.cgp.RPC.getUsersOnsite(Native Method)
4XESTACKTRACE at com.telcordia.iscp.moc.libj.cgp.RPC.getUsersFromSite(RPC.java:27)
4XESTACKTRACE at com.telcordia.iscp.moc.server.config.RPCThread.rpcGetUsers(RPCThread.java:111)
4XESTACKTRACE at com.telcordia.iscp.moc.server.config.RPCThread.run(RPCThread.java:60)
4XESTACKTRACE at java.lang.Thread.run(Thread.java:568)
3XHNATIVESTACK Native Stack
NULL ------------
3XHSTACKLINE at 0xD2A2FC40 in changeTimeOut__FP8__clienti
3XHSTACKLINE at 0xD2A36CFC in ismc_getUsersOnsite__FRCQ2_3std4listXTQ2_3std12basic_stringXTcTQ2_3std11char_traitsXTc_TQ2_3std9allocatorXTc__TQ2_3std9allocatorXTQ2_3std12basic_stringXTcTQ2_3std11char_traitsXTc_TQ2_3std9allocatorXTc____RQ2_3std4listXTQ2_3std12basic_stringXTcTQ2_3std11c
3XHSTACKLINE at 0xD2A4D8D0 in Java_com_telcordia_iscp_moc_libj_cgp_RPC_getUsersOnsite
3XHSTACKLINE at 0xD2821CE8 in mmipInvoke_O_O
3XHSTACKLINE at 0xD27E9370 in mmipExecuteJava
3XHSTACKLINE at 0xD27E1FB4 in xeRunJavaVarArgMethod
3XHSTACKLINE at 0xD27E2260 in xeRunDynamicMethod
3XHSTACKLINE at 0xD27CFFFC in threadRT0
3XHSTACKLINE at 0xD293CD10 in xmExecuteThread
3XHSTACKLINE at 0xD2940BF4 in threadStart
3XHSTACKLINE at 0xD2A75408 in _start
3XHSTACKLINE at 0xD005277C in pthreadbody
NULL
Thanks

Take a look at this IBM article to see if it helps:
http://www-128.ibm.com/developerworks/eserver/library/es-javaonaix_core.html

Secure link issue

I cannot update my I tunes. I get a secure link issue when I run a diagnostic check. This is using windows xp system

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

CS-MARS 4.x and AIX Machines?

hi,
i have a Oracle database instance running in my AIX machine. I want to do a incidence management for the AIX servers along with the Oracle database. Currently i am having CS-MARS 4.x running in my network.
Can anyone help me with this..please?
-Mainak Biswas

hello,
When I upgrade the mars to 4.3.1. I've noticed that the mars doesn't received any logs from IPS,ASA and other reporting device. But when I check ASA and IPS, i'm pretty sure that the ASA and IPS were sending syslogs alerts to mars the only problem is the mars could not receive. I can ping the IPS / ASA in the mars console but failed when i test the connectivity/discover in Web Interface.
I also execute the pnstart and pnstatus command in the CLI console.
This is what i get:
[pnadmin]$ pnstart
[pnadmin]$ pnstatus
Configuration error: host name does not match janus.conf::janusBoxName.
Please contact Cisco for support.
[pnadmin]$
Any ideas about this?...
Carlou

Linking Issue on AIX Machine

Similar Messages

Maybe you are looking for