Linking movieclips together

Is there a way to link the actions of movie clips together,
so that if movie1 is playing, movie2 will also be playing. But if
movie1 is paused, movie2 will also be paused? Thanks!

if you can't easily determine when movie1 is playing or
stopped you would have to start a loop that continually checks
movie1's and movie2's _currentframe and check it against the
previous _currentframe to see which is playing and which is stopped
and execute the desired code to bring their play status
in-line.

Similar Messages

The text in my links run together.

The text in my links run together. Any ideas how to fix this? Here's a link to the page: http://bodyprecision.com/main-line-pilates-teacher-training/pilates-full-training-test.htm l Thank you!

Sunflower19714 wrote:
Thank you for doing this. I fixed everything that was noted and ran the code through the validator again. It came out clean but the problem still exists.
Ok, this is a weird one I'd say, it happens.
The issue is in this stylesheet:
../../bp-styles.css
Can you do a test for me. Grab everything in that stylesheet and paste it between <style> </style> brackets directly in your pages code before the closing </head> tag:
<style>
PASTE ALL CSS FROM bp-styles.css HERE
</style>
</head>
Then comment out the orginal linked bp-styles.css style sheet to stop it working by adding  (see below)

What happens when you view the page then?
I think you may just have a corrupt file somehow.

I am new to pages and want to know how to link elements together to create one unified element that I can then duplicate several times on the same page?

I am new to pages and want to know how to link elements together to create one unified element that I can then duplicate several times on the same page?

I think you are talking about grouping objects.
1. They must all be floating objects
2. Command click on each in turn
Menu > Arrange > Group
Peter

Error When Linking Projects Together in Captivate 4

Hello!
I've been having some challenges linking multiple captivate projects together. I've done some research on the forums here and have noticed that this is a pretty common issue. But unfortunately for me, after following the advice that I've read, I'm still having problems. There's obviously something that I must be missing, so I'll do my best to outline what I've done in as much detail as possible in hopes that someone can help me.
Software:
I'm using Captivate version 4.0.1. Build 1658
Situation:
I'm creating an e-learning that it is made up of 8 separate projects:
Project A - Welcome Page (1 slide) which has a button that is linked to Project B
Project B - Home Page (1 slide) made up of 6 buttons, each one links to one of the 6 captivate projects (C-H) listed below
Project C - Lesson 1 (41 slides)
Project D - Lesson 2 (45 slides)
Project E - Lesson 3 (36 slides)
Project F - Lesson 4 (33 slides)
Project G - Lesson 5 (29 slides)
Project H - Lesson 6 (30 slides)
Links:
All of the links are made through text buttons, and when each button was created, in the area where it asks "If the user clicks the button", I select the "open other project" option. Then I browse to the .cp project that I want to launch after the user clicks the button. Only the relative path of the project I selected is showing in the "Project" field, then I click Apply, then OK.
Publishing:
I created a folder on my C: Drive named "MyName Captivate", and I published all of the projects to that folder. Additionally, all of the projects are also in that folder as well. When publishing the projects, I'm publishing them as Flash (.swf) files. On the publishing screen, on the "Project Title" field, I left that field unchanged (it defualts to the project's name). The "Folder" field has C:\MyName Captivate in it. I checked "Publish Files to a Folder" and "Export HTML" under Export Options.
Flash Security Settings:
I went to the Flash Security Settings and made sure that the "Always Allow" radio button was clicked, and then I went to the "Edit Locations" drop down box and navigated to the "C:\MyName Captivate" folder where all of my .cp projects are located and added it to the "Always Trust Files in These Locations" field.
The Problem:
After all of the files have been published, and I test it out in my web browser, I get the following error message when I click the button to go to the linked project (in this case, when clicked, the button is supposed to take me to Project B): "Cannot find file:///C:/Users?HP%20User/AppData/Local/Temp/cp4Temp/~Cal55B/ProjectB.htm. Make sure the path or Internet address is correct." I am confused about where that internet path is coming from, because I made sure to place all of the project files into the "C:\MyName Captivate" folder, and the button when clicked should "open other project", which in this case is Project B.
I hope that all made sense. If anyone can help guide me in the right direction, it would be greatly appreciated. Thanks so much for your help!

WestCoast,
I believe this is an extremely common issue. Personally, I gave up trying to link projects together like this. I also wanted to offer my users a more "perpetual" interface. I wanted the user, at any time, to be able to switch to another Captivate movie - rather than being forced to navigate through more slides to find the right button to click. So, I created a product called the Launch Pad. It works by using one web page with a menu. Clicking a menu item pulls in a seperate .SWF file into the web page.
One suggestion might be to have your buttons link to fully qualified (http://myserver/myfolder) URLs instead of "projects". Each button links to the HTML file that Captivate publishes. Full URLs with the entire URL of the HTML file seem to work better than relative URLs.

Help to link buttons together

I got 9 buttons thats needs to work together.
When pressing Bench PWR. The Bench PWR. and OFF goes ON.
When pressing NO LOAD, OFF buttons goes off and Bench PWR. stays on.
When pressing 200VA Unity, NO LOAD goes off and Bench PWR. stays on.
And sow on, the Bench PWR. button must always stay ON, and the other buttons must change.
When pressing Bench PWR. to OFF all buttons goes off.
I also want all the buttons abow Bench PWR. not to work if Bench PWR. is not ON.

Hi Kimlorentz,
If i well understand the requirement why you are not planning to use radio button.
Look the attached VI.
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!
Attachments:
Link Buttons Together.vi ‏14 KB

Linking Apps Together

I was watching Adobe TV and I noticed that the instructor hsd edge code linked within the Illustrator app. There were different icons for different apps at the top underneath the option tabs. Does anyone know how I can do this with my apps? Thanks in advance. By the way, I'm using CC but I also have all the CS6 apps as well.

From: [email protected]
Sent: Friday, July 12, 2013 7:45 AM
To: robert.fiore1
Subject: Linking Apps Together
Re: Linking Apps Together
created by <http://forums.adobe.com/people/%5Bscott+w%5D> in Illustrator - View the full discussion <http://forums.adobe.com/message/5499176#5499176

Linking songs together

i was wondering if there was a way to link songs together so when playing music in shuffle mode i can set certain songs to play together before moving on to another random song. basically how can i make 2 or 3 songs play as if they were 1 song. for example, Pink Floyd's "Another Brick in the Wall Pt1" "The Happiest Days of our Lives" & "Another Brick in the Wall Pt2" is sort of a trilogy of songs that should be played in their respective order one after the other. However when playing in shuffle mode, it will randomly select songs and never plays them in order or one after the other. How can i make it so iTunes thinks the three songs are actually just one, and therefore always plays them together and in order. I have other songs that i'd like to do this with as well. Any help would be appreciated.
Thanks in advance, GL

With iTunes you can only do this while ripping from a CD. (See the option in the "Advanced" menu.) For existing files you'd have to use some other application.
Alexander.

Link everything together to be used in Python

for linking python and c i use this instruction:
    g++ -shared func.o func_wrap.o -o _func.so
but I get this error:
    ld: symbol(s) not found for architecture x86_64
    clang: error: linker command failed with exit code 1 (use -v to see invocation)
I tried different place for -v but it dose not work.
what is problem?
I compiled through these commands:
// Compiling the actual function
    g++ -c -fpic func.c
// Generate the wrapping C code using SWIG
    swig -python func.i
// Compile the wrapping C code
    g++ -c -fpic func_wrap.c -I/usr/include/python2.6
// Link everything together to be used in Python
    g++ -shared func.o func_wrap.o -o _func.so

Hello,
on which version of BPC are you running ?
Can you try to make all your SSIS variables upper case, it helped me on earlier versions of BPC.
Be aware too that if you have an instruction like GLOBAL(STR,some_value), BPC will do a string replacement within the MODIFYSCRIPT variable : "STR" -> "some_value".
for example :
GLOBAL(STR,some_value)
TASK(STR TSK,....) will be replaced by TASK(some_value, ....).
Vladimir.

Is there a way to link documents together?

Okay basically, I'm new to macs, and I am a uni student so when i'm doing notes etc I have to open up a pages document and usually a pdf file on preview. I was wondering if there was any way to somehow link these two documents together so that when I open one of them, the other one opens... I don't know if maybe i could add the pages file as a comment to the pdf or something. And I don't want to just merge the two files together so that the pdf is at the end of the notes, I still want 2 documents that are seperate but open automatically together... I know that sounds so lazy but I have sooo many different files I need that it takes me forever to find the corresponding ones!
Hope you can help!
Shannon x

In the words of the Rolling Stones, "you can't always get what you want."
So you have documents that have unfilled pages, each of which has an assigned page number that you synched through the book panel, but now you want the text in these documents to flow as one continuous thread? How do you think InDesign is going to be able to thread text in different files, and what do you expect to happen to your page numbering?

Link persons together to get the total Household value

Version
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
Hi
i am trying to find all possible link and spouses to the persons and bring them together to find out the total sum for that household.
We have a person table which lists all the persons in out DB
a link table wich links identical persons
a spouse table which has spouse relation
Can some one please help me in building this logic.
Persons in our database = 100 / 200 / 300 / 400 / 500 / 600 / 700 / 800
Ids linked together that means they are the same people.
100 --> 200
200 --> 300
200 --> 800
300 --> 700
400 --> 500
Spouse
100 -- 600
200 -- 500
400 -- 500
Required Output
ID ID2     VALUE   VIA_WEPID
100 100 --> 1000   100 ** Direct Link
100 200 --> 2000   200 ** Direct Link
100 800 --> 8000   200 ** In Direct Link
100 300 --> 3000   200 ** In Direct Link
100 300 --> 3000   300 ** In Direct Link
100 700 --> 7000   300 ** In Direct Link
100 600 --> 6000   600 ** Direct Link
100 500 --> 5000   200 ** In Direct Link
100 400 --> 4000   500 ** In Direct Link
/* Formatted on 8/24/2012 8:28:39 AM (QP5 v5.115.810.9015) */
WITH PERSON AS (SELECT   100 ID, 1000 VALUE FROM DUAL
                UNION ALL
                SELECT   200 ID, 2000 VALUE FROM DUAL
                UNION ALL
                SELECT   300 ID, 3000 VALUE FROM DUAL
                UNION ALL
                SELECT   400 ID, 4000 VALUE FROM DUAL
                UNION ALL
                SELECT   500 ID, 5000 VALUE FROM DUAL
                UNION ALL
                SELECT   600 ID, 6000 VALUE FROM DUAL
                UNION ALL
                SELECT   700 ID, 7000 VALUE FROM DUAL
                UNION ALL
                SELECT   800 ID, 8000 VALUE FROM DUAL
    PERSON_LINK AS (SELECT   100 ID, 200 LINK_ID FROM DUAL
                    UNION ALL
                    SELECT   200 ID, 100 LINK_ID FROM DUAL
                    UNION ALL
                    SELECT   200 ID, 300 LINK_ID FROM DUAL
                    UNION ALL
                    SELECT   300 ID, 200 LINK_ID FROM DUAL
                    UNION ALL
                    SELECT   200 ID, 800 LINK_ID FROM DUAL
                    UNION ALL
                    SELECT   800 ID, 200 LINK_ID FROM DUAL
                    UNION ALL
                    SELECT   300 ID, 700 LINK_ID FROM DUAL
                    UNION ALL
                    SELECT   700 ID, 300 LINK_ID FROM DUAL
                    UNION ALL
                    SELECT   400 ID, 500 LINK_ID FROM DUAL
                    UNION ALL
                    SELECT   500 ID, 400 LINK_ID FROM DUAL
    SPOUSE AS (SELECT   400 ID, 500 SPOUSE_ID FROM DUAL
               UNION ALL
               SELECT   500 ID, 400 SPOUSE_ID FROM DUAL
               UNION ALL
               SELECT   200 ID, 500 SPOUSE_ID FROM DUAL
               UNION ALL
               SELECT   500 ID, 200 SPOUSE_ID FROM DUAL
               UNION ALL
               SELECT   100 ID, 600 SPOUSE_ID FROM DUAL
               UNION ALL
               SELECT   600 ID, 100 SPOUSE_ID FROM DUAL)
SELECT   *
FROM   person, person_link, spousei am trying to implement this logic but i am no where near to the reqired output
SELECT   ID, ID ID2, VALUE FROM person
UNION
SELECT   a.ID, LINK_ID ID2, VALUE
FROM   Person a, person_link b
WHERE   a.id = b.id
UNION
SELECT   a.ID, spouse_id ID2, VALUE
FROM   Person a, spouse b
WHERE   a.id = b.idEdited by: new learner on Aug 24, 2012 6:05 AM
Edited by: new learner on Aug 24, 2012 7:56 AM

Does this make sense:
with
person(rid,the_value) as
(select 100,1000 from dual union all
select 200,2000 from dual union all
select 300,3000 from dual union all
select 400,4000 from dual union all
select 500,5000 from dual union all
select 600,6000 from dual union all
select 700,7000 from dual union all
select 800,8000 from dual
person_link(rid,link_id) as
(select 100,200 from dual union all
select 200,100 from dual union all
select 200,300 from dual union all
select 200,800 from dual union all
select 300,200 from dual union all
select 300,700 from dual union all
select 400,500 from dual union all
select 500,400 from dual union all
select 700,300 from dual union all
select 800,200 from dual
spouse(rid,spouse_id) as
(select 100,600 from dual union all
select 200,500 from dual union all
select 400,500 from dual union all
select 500,200 from dual union all
select 500,400 from dual union all
select 600,100 from dual
person_link_x(rid,link_id) as
(select 100,200 from dual union all
select 200,300 from dual union all
select 200,800 from dual union all
select 300,700 from dual union all
select 400,500 from dual
person_link_x as
(select rid,link_id
   from person_link
where rid < link_id
spouse_x(rid,spouse_id) as
(select 100,600 from dual union all
select 200,500 from dual union all
select 400,500 from dual
spouse_x as
(select rid,spouse_id
   from spouse
where rid < spouse_id
)the order of rows is changed for readability
the <tt> factors person_link_x </tt> and <tt> spouse_x </tt> are there to eliminate cycles
using <tt> factors person_link_x </tt> by following links (connect by ...) you can get the following trees (hierarchies) - No Database at hand to do it myself
1:   100     200   200   300   400
      |       |     |     |     |
2:   200     300   800   700   500
     / \      |
3: 300 800   700
    |
4: 700thus you discover there are just two individuals in the table denoting the same persons as the trees in the middle are all subtrees of the first tree.
taking the root values 100 and 400 as person ids and replacing all "alias" values with the corresponding root values in spouse_x you get
spouse_x(rid,spouse_id) as
(select 100,600 from dual union all
select 100,400 from dual union all
select 400,400 from dual
)the last row makes no sense (data entry error, ... ) and: either she has two husbands or he has two wives ;)
Regards
Etbin

My MAcBook has 10.7.5 I wanted to update to Mountain Lion. I am told I cannot do this. Why? Also, my desktop has Calendar and MacBook has ICal I cannot link them together. Any help there?

My MacBook is 10.7.5 I wanted to update and purchase Mountain Lion app. I was told that I couldn't. I can understand, why? Also my newIMAC has Calendar and my MacBook has ICal. They are not linking together. CAn anyone help?

No, the model 4,1 Early 2008 MacBook will not be able to run Mountain Lion.
It's mainly the video card. The Models 2,1 through 4,1 have video cards with non-upgradeable 32bit drivers. The model 5,1 Late 2008 and newer have at least the NVIDIA GeForce 9400M with 64bit drivers. Mountain Lion requires 64bit native drivers. Mountain Lion no longer supports Intel's GMA 950 or GMA X3100 graphics processors.
While Lion used some 32 bit and a lot of 64 bit code, Mountain Lion is pure 64 bit, which excludes more systems than Lion did. It's not something you can add memory to, for example, as it involves the base architecture.
http://reviews.cnet.com/8301-13727_7-57470261-263/older-64-bit-macs-out-of-the-p icture-for-mountain-lion/?tag=mncol;txt
http://reviews.cnet.com/8301-13727_7-57387846-263/will-your-mac-run-mountain-lio n/

Linking contacts together

I just recently updated my software on my Droid X. Everything is fine except I can't link my contacts together. Before I updated my software I was able to link my contact with their facebook contact, that way they would only appear in my contact list once instead of twice and have all their info from facebook under one general contact instead of two. If someone could help me that would be wonderful!

tb244907 wrote:
I just recently updated my software on my Droid X. Everything is fine except I can't link my contacts together. Before I updated my software I was able to link my contact with their facebook contact, that way they would only appear in my contact list once instead of twice and have all their info from facebook under one general contact instead of two. If someone could help me that would be wonderful!
In gingerbread, contacts are combined with several different sources. If you open a contact, you will see where that contact originated from (Google contacts, Backup Assistant, and I am assuming Facebook would be included there too).
From there, you can delete the multiple contacts from the different sources. If you want just Facebook Contacts, then delete the Contacts from Google Contacts, Backup Assistant etc.
Also check your settings in Gmail (on the web). The default is that if you send an email, and it doesnt exist in Google Contacts, it will add the email address to your Google Contacts.
I found this happening when I upgraded to Gingerbread. I always had my contacts in Backup Assistant, but Android and Backup Assistant do not play nice with each other on Birthdays/Anniversaries. So I exported them out of Backup Assistant, imported them into Google contacts and then deleted them from Backup Assistant. No more doubles on Contacts.

Linking families together in AddressBook

Is there anyway to link family members together in address book without making them a group? I need many families to be in a group.
If not does anyone know of some solid free software that can make a directory for households while still breaking down the individual details (cell phone, email etc.) THANKS!

Hi Thomas
there are 2 ways for doing this-
1. Using relationships as explained by Adrivit. But since you want to manage/edit the relationships via Portal Interface using APIs, I am not sure how effectively they are supported by APIs. Please check API capabilities below- http://help.sap.com/javadocs/mdm/sp06/com/sap/mdm/data/commands/ModifyRelationshipsCommand.html
2. Using Lookup Main fields which you have tried. You can make this field Multivalued and assign 4/5 child records. This is well supported by APIs and will be easier to manage in Portal.
Based on previous experience I can share with you that working with relationships has some limitations and going with Lookup(main) field will be a better solution.
Best regards-Ravi

Linking schematics together

To create virtual wiring you can rename the Net to an identical name found elsewhere, and a 'virtual wire' will be created. This is only for a single schematic page however.
How can you link multiple schematics together, for example, having a bus be common between the two. Or having a wire or pin leave one schematic and enter another. Is there terminology for this that I can search the help files for?

Don't you just hate when that happens.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

Linking classes together

hi, do u guys know of any tutorials about linking two or more classes together?
i need to learn anything and everything about it.
thx,
gildan2020

class A
    public static void main(String[] args)
        // uses static PrintStream object in System class and
        // calls the println() method on that PrintStream object.
        System.out.println("Hello World");
}http://java.sun.com/docs/books/tutorial/
http://java.sun.com/learning/new2java/index.html
http://javaalmanac.com
http://www.jguru.com
http://www.javaranch.com
Bruce Eckel's Thinking in Java
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java

Linking movieclips together

Similar Messages

Maybe you are looking for