Linking multiple Nike+ Sensors to 6th Gen Nano

Is there a way to link multiple Nike+ sensors to a 6th Gen Nano? I have the Nike+Sports kit with that sensor. I would like to link the sensor that I use with my touch to the nano also.
Please point me in the directions of the correct instructions.
I've tried to link, but the Nano doesn't see the new sensor.
thanks
marc

anyone have any experience with this?

Similar Messages

6th gen nano with nike + playlists don't shuffle

I switched from 1st gen nano to the 6th gen nano last week and one thing that I noticed is my playlists when hooked up to nike + sensor don't shuffle. I hear the same songs in order every run! It's frustrating because the 1st gen nano if shuffle is turned on for songs will shuffle your playlist songs in nike + mode the 6th gen doesn't. I shook the heck out of it and still it's the same song. Turned off shake when shuffle to see if their's a shuffle choice nope. Anyone else find this frustrating?
I have a call in to tech support this morning going to ask them this question seems I missing something or the 6th is missing this option.

I have the very same problem! And the calibration is a pain but it's getting better. "Default calibration... is accurate for many users" pshh...
You should let me know if you find out a way to get past this!

Using nike fitness technology on 6th gen nano

One of the main reasons I chose the 6th gen nano over the shuffle was the feature enabling run tracking. It was my understanding that the newest generation was ready to go and didn't need an added kit like previous nano generations. However, I find that my nano only has the option to use a pedometer on the pre-loaded fitness icon. I'm new to apple technology, so excuse my ignorance, but I can't seem to find a way to track distances, mile times, and similar. Please help me figure out if there are controls that can be changed or additional downloads that must be pursued. Thank you!

You can't. Being able to do so would dramatically decrease your iPod's battery life anyways.
B-rock

My apple 6th gen nano turns on but only has a bright light without images

my apple 6th gen nano turns on but only has a bright light without images

Hi fejevitzky,
Your question, "Based upon that, I believe you are telling me you do not think it is the BIOS--is that correct?" Yes, as long as you dont see any "white" light reveal from LCD bezel back side while with blank screen state. LCD bezel is the cover around LCD, most design put LED modeule at the bottom side next to LCD. While back light is not on during boot up sequence, that means system doesnt have chance to get BIOS program running. It also means, it stuck at state of hardware bring up. Normally motherboard related.
I quickly checked hp.com and found some link that may help. Or 1-800-HP invent (1-800-474-6836) can save times. This forum only intends to quick/simply reply users questions. About another service and repair charge, I have to give you other links to reach.
HP Partner and Store Locator: (I try to search your city, but doesnt work well. Suggest you call for quick response)
http://www8.hp.com/us/en/store-finder/index.do
Contact info:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Contact HP:
http://www8.hp.com/us/en/contact-hp/contact.html
HP SmartFirend Services: (I saw it with price of service)
https://h30617.www3.hp.com/HP/home/index.asp?jumpid=in_r11682_us/en/hho/pps/suppgateway_gi_ob_ds_pd/...
Thank you so much. If you think my reply helps your product, please help to close this case once you feel comfortable. And, click "KUDOS".
I work for HP.

6th gen nano keeps dispalying no radio signal even though I have the earpiece plugged in. Can anyone advise please?

6th gen nano keeps displaying no radio signal even though I have the earpiece plugged in. Can anyone advise? Thanks

Hey there larkandwarbler,
It sounds like you are experiencing multiple issues with this iPod Nano 5th Gen. From what you are describing it seems we can isolate this to either the software or the hardware on the device with a couple of simple steps assuming you have tried another set of headphones. First, reset your iPod with this article:
How to reset iPod
http://support.apple.com/kb/HT1320
How to reset an iPod with a Click Wheel
iPod models with a Click Wheel include:
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano
Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
If you are able to reset it, but the issue persists, or you are unable to reset it, I would next attempt restoring it with iTunes:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
Thank you for using Apple Support Communities.
Regards,
Sterling

Does the 6th gen nano have a mecanical or piezoelectric accelerometer?

I know that there are basically two types of pedomenters: mecanical/spring action and piezoelectric. They maybe 2 or three axis acceleromenters but when it comes to sensors, its one or the other. One has to be vertical to trigger properlly and the other can be thrown in a pocket because it doesn't have to be in a certain position to work. Now this one says that it has a 3 axis acceleromenter but is that mechanical or piezoelectric? I don't hear a click so that makes me think that it must be piezoelectric but you know what they say about assuming things. I can't find this spelled out anywhere except that in the version that required a shoe sensor had a piezoelectric sensor in the shoe. However they say we don't need the shoe sensor anymore, soooooo....does that mean we have it in the 6th gen nano itself? I'd love to know.

Run-mofo,
That's great news.
The reason I don't just delete the 'feat' bit is three fold:
First, like Erik Dyson, I want things to work properly. Second, I like to know who is being "featured" so, if that track strikes me because of the contribution of the featured artist, I can find more information about the featured artist. Finally, I just like to have as much information accessible to me as possible.
Now, the question is, does my Mini Cooper (BMW) iPod control software will use the iPod OS to identify the artist for the "Artist" category or if the Mini Cooper software will ignore the "Sort Artist" ...

6th Gen Nano Backlight

I can't believe it I am on my THIRD 6th gen Nano, all had the same problem - a failed backlight. First one failed after about three months, second one two months, and my third failed after the first time I used it for a workout after I got the replacement.
Symptoms always the same - plays music fine, finish my workout (using the Nike "Fitness"), then as I hit pause and calibrate the distance, the screen flickers on and off a few times, then it's dark.
I can sync it just fine, and have reset it. If I shine a bright light on the screen I can see that it is working and responds to touch. Also, if I shake it hard sometimes it flickers. That tells me it's a hardware problem.
I just can't believe I'm on my third bad unit.
The only thing in common is I am using an older pair of high-quality (around $100) Sony in-ear phones. They play fine. I wonder if there is a problem and the earphones are shorting in the connector, maybe damaging the backlight?
Back to the Genius for my fourth unit. I'm going to use another pair of Apple earphones.
Searching the forum here, I see a lot of backlight issues on the Nano...

If this is the case (moisture damage) I'd be quite surprised.
I clip it to my waistband, with the screen facing outward. It doesn't really get sweaty at all, maybe the backside of the metal clip, and the screen stays relatively dry. Maybe my hands are sweaty, but this is supposed to be a workout-oriented MP3 player for active people, right? I am just using it on an indoor elliptical trainer, and it never sees rain or dripping moisture.
When I get my (fourth) unit, I can try clipping it to my outer pocket, but if this is the problem they are not sealing it very well. What is strange is that the unit itself looks very tightly sealed from the outside and it's hard to believe they cannot do better.

6th Gen nano wont connect to computer or itunes.

Alright so when i connect it itunes identifys that i have plugged in an ipod but it cant properly identify it, usually when you plug in a new ipod you give it a name and all that, but i cant even get that far. My itunes is updated and ive unplugged and plugged in my usb's multiple times and restarted my computer multiple times, used to safely remove hardware button to reconnect it, and turned off my firewall, it seems ive tried everything and its not working.. im about to just take it back becuase im begining to think its defective. It wont show up as a driver on my computer either, and ive tried resetting it without itunes, nothing seems to be working... if theres something i missed leave a post ill try it and get back to ya(:
:EDIT: ive also followed the entire apple troubble shooting page for the 6th gen nanos and it didnt help me at all D:
Message was edited by: xMagicalxMaggotx

The older pods are different from the newer ones. The newer ones need some software to be working correctly that the older ones don't.
It sounds like the apple USB stuff is not installed correctly for you. Here is an article from apple on what to do:
http://support.apple.com/kb/ht1923
Some other things to keep in mind:
- Don't connect the iPod through a USB hub
- Connect it directly to the computer through a USB port on the back, not one in the front. The USB ports on the front of Windows based systems are notoriously underpowered.
hope that helps,
i

Is the latest update to the 6th gen nano a software download or does it come with the new watch faces and larger icons out of the box

Apple shows the new 6th gen nano with the new selection of watch faces and lager icons etc as per new update, but stores still have the 6th gen nano with just 3 watch faces and smaller icons etc. Is the newer spec just a software update that i do after purchase or does it come updated out of the box?
Thx

It should come out of the box with the new 1.2 update, but if it doesn't you can simply connect it to iTunes, download, and install the update from there.
B-rock

HOW do I get the "watch" to stay on and not shut off on my 6th GEN NANO?

After purchasing a $70 cool watchband for my new 6th GEN NANO, I'm very disapointed that I can't get the "watch" function to stay on more than 15 seconds. AppleCare says that it isn't meant to stay on, it would run down the battery. Then why put on 16 watch faces, and show it as a "watch" on everything you publish? Doesn't make sense you can watch TV shows and movies, but doesn't have enough battery to run a watch face. BAD design, and shame on APPLE for selling a dozen different watchbands in their stores. Now don't you think the store salesman would say "are you thinking of wearing this as a watch, or to hold your NANO while you are at the gym"? 15 seconds is often not enought time to get setup and take someone's blood pressure. I don't think I need to offer an explanation of WHY a watch should work more than 15 seconds without pushing a button, do I?

This is getting silly, but I'm not too young to remember the early digital watches. The difference is that we knew what we were buying . jThey were upfont about the FACT that the watches didn't stay on. And how well did they sell as watches? Hmmm I don't think any of us said that Apple was pushing Nano primarily as a watch. That said, this is not a third party "app" either .... 18 clock faces come with the Nano as a "feature" of the product. It's not a "digital time read out"... it's made to look and act like a watch. Apples own website touts that you can change its face "to match your mood or your outfit".... The bands they sell range from $20 bucks to like $150 bucks.... This is a HUGE money maker for them. It is THESE KINDS OF FEATURES that brings people back buying new ipods, because like I said, without them, I have plenty of devices that already "record music", or "store pictures". And your other points have zero merit. Go to the Apple website to the Nano 6 page where Apple touts all of its merits. This is where Apple explains the features of their product. There is a whole section:
http://www.apple.com/ipodnano/features.html
Clock faces. Time to match your mood. Or your outfit.
(copy below)
It’s all in the wrist.
Do you wear your iPod nano on a watchband? With 18 different clock face designs to choose from, you can have a new watch style whenever the mood strikes you. Sport an analog face for a formal event, go digital for a retro feel, or choose a whimsical, animated character like Mickey Mouse or Kermit the Frog. There are also color options so you can match the color of your iPod nano. iPod nano watchbands are available in a range of styles and colors from theApple Online Store.
And last, for the record Sir, I have probably purchased 50 Apple products for myself, my business, and as gifts in the last 10 years. I have had my manufacturing issues which Apple always responsibly took care of. But I have NOT ONCE complained in this forum about ANYTHING. I am a HUGE Apple fan. I felt strongly enough, that this issure warranted warning others about. Mostly, I wanted APPLE to understand the gaff and perceptual problem which was created. Perhaps not to all (like to you), but certainly to some (obviously like me). Let's face it, we BOTH represent groups of the public, like it our not. Especially, since I rarely talk to Apple staff, I'm an early adopter, and for some reason, I hesitated on this product and did talk to a couple staff members when I was in the store FOR OTHER THINGS. I bought one for myself, and three for gifts. I've already returned the ones I bought as gifts, because when I showed my neices and nephews MINE, and the disfunction of the watch, they all lost interest in keeping theirs, and opted for other Apple devices instead. And if you still don't think they are marketing this Nano as a watch more than iphone, touch, pad, or classic, then I throw up my arms, and say Happy New Year. You are Apple washed and whipped beyond repair. NOBODY is perfect, not even Apple. Or, you.

HT1459 my 6th gen nano stopped working and is not recognized by my computer or in itunes. I tried rebooting with directions, it still doesn't work. I've tried pluggin into power source and pushing the on off button with the volume down button- this doesn'

My 6th gen nano ipod stopped working. I figured it was because it was next to my sweaty body, so put it in rice. I sought help from internet and tried all of the troubleshooting steps; i.e pushing down the power button and the volume down button consecutively, plugging it in to a power source, waiting 10 minutes and pushing the buttons while it was plugged in. Nothing has worked thus far. Is there anything else that I can try?

Hi there Betsyell,
You may find the troubleshooting steps in the article below helpful.
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
-Griff W.

I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

Hey Stan1958,
Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M.

6th gen nano not recognized by win7, nor itunes

i've been using my 6th gen nano for a few months now with no problems. suddenly today, i plugged it in and it wasn't recognized by windows and doesn't show up in itunes.
i keep getting errors stating the unknown device is not recognized. i've uninstalled and reinstalled drivers in the Device Manager. i've tried everything on this support page: http://support.apple.com/kb/TS1538. i've also uninstalled, reset, and reinstalled itunes...twice. i've also reset the 6th gen nano several times by holding down the - volume button and sleep button.
the weird thing is, when i plug in my 2nd gen shuffle, it's instantly recognized by win7 and itunes. same thing for my 1st gen nano (using the same cable and USB port).
itunes 10.1.1.4

Start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Cheers,
Patrick

I have a 6th gen nano and windows 8.1. Itunes does not recognise my nano anymore. I have tunes to download

I have a 6th gen nano and windows 8.1. Itunes does not recognise my nano. I have tunes to download

B noir
Yes that is correct
Okay. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Can I somehow teach my 6th gen Nano to tell me how far I've walked in miles rather than "steps," by telling it how long each of my steps is?

Using the pedometer in a 6th gen Nano:
Currently, it (very accurately) tells me how many steps I've taken when I go for a walk. Works fine.
Meanwhile, on my own, I carefully calculated how far each of my "steps" is (2.231 feet/step, in case you're curious).
Thus, after each walk, I multiply the number of steps I've gone by 2.231 to get the number of feet I have traveled, and then divide by 5,280 to get the exact distance I've traveled in miles.
While this system works fine enough, I'd like to avoid having to do a bunch of arithmetic after each excursion. So I ask:
Is there any way to input into the Nano the exact distance of each of my personal steps, and then have the Nano automatically display to me the distance of a walk in mile units of measurement, rather than (or perhaps in addition to) simply the number of "steps" I've taken?

I am working with the very same concept for my project and the auto fade in and out has messed everything up. If I hear or a fix I'll be sure to reply here to let you know!

Linking multiple Nike+ Sensors to 6th Gen Nano

Similar Messages

Maybe you are looking for