Linking multiple speaker volumes permanently, how?

I like the new iTunes 10 feature of separately controllable speaker volumes, however I have the house setup so it really needs all of the speaker volumes to remain constant. So far I've noticed that if I have all the speakers playing they will move in sync, but if at night I turn off some of the speakers and only control one set when I wake up they've lost sync. The speakers that get turned off default to the old volume they were at when shut off, not the present master volume. Is there a way to make the speakers always be at the master volume?
Thanks!

Tried and failed repeatedly to get the speakers to all default to the master volume when they are turned on. The speakers always default to their last setting, which if was higher than the current master volume actually alters the master volume higher and leaves the speakers that are on at their level. That means when turning the master volume up the speakers that were already on do not go up in volume in sync with the master volume. Really quite annoying. There needs to be a way to make all remote speakers always default to the master volume, not their last setting. Please make this possible.

Similar Messages

Linking multiple tables in numbers, how can I sort one table and this follow through on subsequent tables in the document?

I am a teacher setting up a tracking system using Numbers for the first time. I have set up a summary sheet with puil information, some of which is "looked up" from other tables within the document. It is working brilliantly until we regrouped the pupils.
When i reorganise the students on the summary page I want the same order to follow on all subsequent tables.
However the pupil lists on all subsequent pages stay in the original order!
Hope this makes some kind of sense as I am about to throw macbook out of the window!
DAve

davidmilce wrote:
I want all of the tick boxes in each row to move with the pupil name when they are reorganised (ie the unique data in each row stays with the pupi no matter where they go when sorted.
Thanks again
Dave
Dave,
I might use Match, Offset and Column in my expressions. There are many approaches to this
Match will tell you which row your person's data is in, and OFFSET will then take you to the row indicated by Match and the column indicated by COLUMN().
Let's say you want to access the data for Pupil A. Further assume that the string "Pupil A" is the content of Column A, essentially the title of the record.
MATCH(A, AF1 :: Table 1 :: A) will return the number of the Row in the source table where Pupil A is found.
INDEX(Main, MATCH($A, Main :: $A), COLUMN()) will get the content, in your case the checkbox status.
You are done if you are happy with displaying "TRUE" or "FALSE"
But if you want, you can substitute graphics, like this:
=IF(INDEX(Main, MATCH($A, Main :: $A), COLUMN()), "☑", "☐")
Regards,
Jerry

How can I get speaker volume contol in the toolbar on my iMac ?

How can I get speaker volume contol in the toolbar on my iMac ?

System Preferences - Sound - Click the box in the graphic below:

My iPhone only has "headphone" volume, no "speaker" volume.How do I fix this so I can hear phone calls?

My iPhone only has "headphone" volume, no "speaker" volume.How do I fix this so I can hear phone calls?

The phone may be stuck in headset mode. Rapidly plug and unplug a headset 10x to free up the switch inside the jack.

How can I re-link multiple "missing" files from my iTunes without doing each one manually?

All of a sudden, hundreds of my songs can't be played because iTunes can't find the files. They are all still on my computer and I can link each of them manually, but that would take days! Is there a way to re-link multiple files at once?

Something must have been done to break the link. Did you manually move files or folders, rename files or folders, or otherwise change where iTunes thinks the files are located? Did iTunes crash at some point?
I haven't seen any truly successful tools to re-link tracks. You can check on Dougscripts website where there's one that uses Spotlight. There's also one that tries to re-link based upon your file being in a logical folder structure.
You could re-link by adding the files again. Of course they will be added as brand new files and not in playlists, and won't have ratings, etc. You can then use one of Dougscripts to automatically remove dead links.

Imac 21" I keep getting ggh'l and the speaker volume screen keeps popping up. Any ideas of what is causing this and how to fix it?

I recently converted from the PC world to Apple and got an IMAC 21". I keep getting the speaker volume screen popping up periodically and also types in ggh'l into whatever application I have open. I have the lastest software and have McAfee antivirus installed. This is a recent problem in the last few days so I'm not sure what is causing it. Any ideas/suggestions?

etresoft a long time contributer to Apple Support Communities wrote a very useful app he called etrecheck which helps in diagnosing many problems caused by third party installs etc.. Go to his website, read his information and from there download and run the program according to his instructions
http://www.etresoft.com/etrecheck
Post the results back here
Pete

How can I increase the speaker volume on my iphone

I have a 3G iphone. After 3 trouble-free days the speaker volume dropped drastically. I can barely hear what is being said. The unit still works well on a handsfree basis. A colleaugue had the same problem but the fault corrected itself. I have of course tried the toggle switches at the side of the phone. Any ideas?
jim

I went into the Apple store yesterday for the same issue. My speakerphone when being used in my car is barely audible. I can't even hear it if I hold it to my ear...but I'm in a convertible. When I'm in my SUV, it's not much better though. In fact, when placing a call, I can barely hearing it dialing. However, I tested all the Iphones on display in Apple and the speakerphones were very low too as was the dialing mode. They agreed that the speakerphone is low but it is the way it works. They suggested using an earpiece, which I hate. I am using a Motorokr T505 speaker box in my car for now. The speakerphone is okay if I"m in an absolutely quiet environment, which is just not the case when driving.

Multiple speaker icon missing

The multiple speaker icon is not visible in lower right hand corner of iTunes. How do I get it to show up?

It is very easy to answer. That feature is gone. Now Safari has tabs to open new web pages. The + sign on the far right of the tool bar will open a new blank tab. You can also still tap and hold down on a link on a web page an select - open or - open in new tab. You can set the tabs to open in the background or turn that setting off and the new page will open in a new tab and make that the current web page so you do not have to select it.
You cannot change any settings for Safari to use the old multiple pages icon. It no longer exists. If you need that feature, download iCab. It will let you open multiple pages that way, and you can use tabs if you like. With iCab, you can swipe left to right to move from one open web page to another which is just one of its many nice features.

Low speaker volume with HDTV on dv7t

I have great reception with the plug in HDTV arial provided
However, with the speaker volume at max it is barely audible.
Speaker volume on internet videos etc is just great
Thanks
Bill

Hi @Qbert58
I understand you are experiencing an low audio difficulty with you notebook.
Please remember when posting to provide your exact model and not just the notebook series for someone to assist you more efficiently.
How Do I Find My Model Number or Product Number?
Have you done all your Windows updates?
Have you ran the HP Support Assistant ?
Here are two links that may also help.
HP Notebook PCs - No Sound from Speakers (Windows 8)
HP PCs - Beats Audio Console (Windows 8)
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I accidently bought a book in the wrong language, swedish, I dont speak swedish. How can I change it to English?

I accidently bought a book in the wrong language, swedish, I dont speak swedish. How can I change it to English?

Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that book, click the arrow to the left of it, click the 'Report a Problem' button :
and then the 'Report a Problem' link on its line :
and select 'inadvertently purchased' as the problem and fill in the details (iTunes support should reply within, I think, about 24 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes, which it is currently doing for me) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption.

HT204053 Link multiple devices to one account

How do I link multiple devices to one master account for purchases with multiple usernames

Hello,
This is a great tutorial using a couple of free DW
extensions.
Check out the "Finished Gallery" example.
You can easily change the settings so the images all appear
in the same
place.
http://www.projectseven.com/tutorials/images/showpic/index.htm
Take care,
Tim
"serestibi" <[email protected]> wrote in
message
news:fpiloc$ruf$[email protected]..
> Hi, beginner here, can you tell?
> I am trying to link multiple images (thumbnails) to one
big picture frame.
> So if you click the thumbnails, each will blow up in the
same frame.
> The easy solution would be to link them to a table, but
it doesn`t seem
> linkable.
> I tried different slide viewers but I can`t personalize
them enough.
> Can I do something within dreamweaver to get this
affect?
> Please sombody help me!
> Thanks , Tibor
>

Unix layout question single vs. multiple logical volumes

Hello friends,
I have a question which I have seen various points of view. I'm hoping you might be able to give me a better insight so I can either confirm my own sanity, or accept a new paradigm shift in laying out the file system for best performance.
Here are the givens:
Unix systems (AIX, HP-UX, Solaris, and/or Linux).
Hardware RAID system on large SAN (in this case, RAID-05 striped over more than 100 physical disks).
(We are using AIX 6.1 with CIO turned on for the database files).
Each Physical Volume is literally striped over at least physical 100 disks (spindles).
Each Logical Volume is also striped over at least 100 spindles (all the same spindles for each lvol).
Oracle software binaries are on their own separate physical volume.
Oracle backups, exports, flash-back-query, etc., are on their own separate physical volume.
Oracle database files, including all tablespaces, redo logs, undo ts, temp ts, and control files are in their own separate physical volume (that is made up of logical volumes that are each striped over at least 100 physical disks (spindles).
The question is if it makes any sense (and WHY) to break up the physical volume that is used for the Oracle database files themselves, into multiple logical volumes? At what point does it make sense to create individual logical volumes for each datafile, or type, or put them all in a single logical volume?
Does this do anything at all for performance? If the volumes are logical, then what difference would it to put them into individual logical volumes that are striped across the same one-hundred (+) disks?
Basically ALL database files are in a single physical volume (LUN), but does it help (and WHY) to break up the physical volume into several logical volumes for placing each of the individual data files (e.g., separating system ts, from sysaux, from temp, from undo, from data, from indexes, etc.) if the physical volume is created on a RAID-5 (or RAID-10) disk array on a SAN that literally spans across hundreds of high-speed disks?
If this does makes sense, why?
From a physical standpoint, there are only 4 hardware paths for each LUN, so what difference does it make to create multiple 'logical' volumes for each datafile, or for separating types of data files?
From an I/O standpoint, the multi-threading of the operating system should only be able to use the number of pathways that are capable based on the various operating system options (e.g., multicore CPUs using SMT (simultaneous multipath threading). But I believe they are still based on physical paths, not based on logical volumes.
I look forward to hearing back from you.
Thanks.
ji li

Thanks for your reply damorgan.
We have dual HBAs in our servers as standard equipment, along with dual controllers.
I totally agree with the idea of getting rid of RAID-5, but that is not my choice.
We have a very large (massive) data center and the decision to use RAID-5 was at the discretion of our unix team some time ago. Their idea is one-size-fits-all. When I questioned it, I was balked at. After all, what do I know? I've only been a sys admin for 10 years (but on HP-UX and Solaris, not on AIX), and I've only been an Oracle DBA for nearly 20 years.
For whatever it is worth, they also mirror their RAID-5, so in essence, it is a RAID 5-1-0 (RAID-50).
Anyway, as for the hardware paths, from my understanding, there are only 4 physical hardware paths going from the servers to the switches, to the SAN and back. Their claim (the unix team's) is that by using multiple logical volumes within a single physical volume, that it increases the number of 'threads' to pull data from the stripe. This is the part I don't understand and may be specific to AIX.
So if each logical volume is a stripe within a physical volume, and each physical volume is striped across more than one hundred disks, I still don't understand how multiple logical volumes can increase I/O through-put. From my understanding, if we only have four paths, and there are 100+ spindles, even if it did increase I/O somehow by the way AIX uses multipathing (SMT) with its CPUs, how can it have any affect on the I/O. And if it did, it would still have to be negligible.
Two years ago, I've personally set up three LUNs on a pair of Sun V480s (RAC'd) connected to a Sun Storage 3510 SAN. One LUN for Oracle binaries, one for database datafiles, and one for backups and archivelogs), and then put all my datafiles in a single logical volume on one LUN, and had fantastic performance for a very intense database that literally had 12,000 to 16,000 simultaneous active* connections using Webshere connection pools. While that was a Sun system, and now I'm dealing with an AIX P6 570 system, I can't imagine the concepts being that much different, especially when the servers are basically comparable.
Any comments or feedback appreciated.
ji li
Edited by: ji li on Jan 28, 2013 7:51 AM

AirTunes (Multiple Speaker Mode)

AirTunes (Multiple Speaker Mode) does not show up.
AE firmware has been updated to 6.3
using Itunes 7.02
Mac osx 10.4.8
I just updated everything to what you see above, I have gone into system preferences, my firewall is off, and udp traffic blocking is unchecked.
I cannot see Multiple speaker mode, but it does list my computer and an external set of speakers, which I can connect to individually but cannot connect to both at the same time.
Any help would be appreciated.
mini mac Mac OS X (10.4.8) Itunes 7.02, firmware update 6.3 for AE

While running iTunes, the small button in the bottom right corner where you choose your output. Click on this and there is an option to connect to multiple speakers. I just updated all the same things as yourselves yestarday and that is how i found it to work.
Pinkster

When i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

when i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

Linking multiple textboxes in a form Acrobat Pro 9?

Hi all,
I'm making an electronic form with Acrobat Pro 9.
The setup was made in Indesign CS3 after which the form boxes were detected by Acrobat Pro 9. There is a larger text area which consists of multiple lines of text (to be filled in by the user).
For this area there are 2 options:
1- Have multiple textboxes linked together so the text flows to the next box automatically when the current one is full.
or.
2- Have 1 multiline textbox with a larger linespacing.
The problem with 1 is, I can't seem to link multiple boxes together in Acrobat Pro 9. The problem with 2 is, I have no idea how to increase the linespacing.
Does anybody have any idea how to accomplish either 1 or 2?
Thanks in advance,
Bas

Linking the text boxes is not really possible, at least in a seamless manner. I've seen a few approaches using JavaScript, but none that are very well implemented. My usual suggestion is to redesign the form to get rid of the lines and just use a single multiline text box, perhaps with a faint border to indicate to the user where the field is.
If you need the lines because the form might be printed and filled by hand or some other means, then you can set up the field with a bit of JavaScript to set the background color to white if the user enters any text, and transparent otherwise. That way, when the document is printed, the lines won't appear if any text is entered, but will if not. You will not need to be concerned about the line spacing of the field matching up with the lines.
George

Linking multiple speaker volumes permanently, how?

Similar Messages

Maybe you are looking for