Linking Olap universe built on two different BEx Queries

Hi,
I need help on following:
I have a universe A build on Bex query 1 and universe B build on Master Data.
I want to link Universe A to Universe B so that i can filter the values in universe B based on user logged in and use them in Universe A.
Can any one let me know if this is supported at first place linking two olap universes in BusinessObjects XI R3.1 SP2/SP3?
If yes how can i acheive this?
Is ther any document that has details about linking the Olap universe in BOXI R3.1 SP2/SP3
If anyone knows about this please let me know ASAP.
Thanks,
Shashank
Edited by: smisha23 on Dec 23, 2010 8:43 AM

Hi Ingo,
thanks for the help.
Let me explain my scenarion so as to why i am trying link universe option.
I have a requirement where in i am suppose to populate the Lov's based on userlogged in BOXIR3.1
i have a BEx query from which i have build a universe when I develop a report from this universe I get some default prompts coming from the bex query which has all the values from master data table now i want to limit this lovs to pouplate only those values which are specific to that user instead of all the values.
Please can you sugeest some way around for this?
Thanks,
Shashank

Similar Messages

  • Urgent ! Assigning (or Linking ) the same workbook into two different roles

    Hi Gurus,
    Coul you tell how to link the same workbook to two different roles.
    I am assigning the same workbook to two different roles, but in the second role the workbook is displaying with different structure than in the first role. I want the workbook should be displayed with same structure in both the roles.
    This is Urgernt.
    Thanks in advance.
    Best regards
    Hari

    Hello hari,
    Both the roles should diplay the same layout for a single workbook.
    please ensure that both the users(with these 2 roles) have similar (all the other)authorisations.
    it's possible that one of the users may have further restrictions in authorisations. check out for z-authorisation objects if any.
    hope it helps..
    thanks,
    (*Don't forget to Assign points on SDN)

  • Creating a universe on Multiple Cubes or Bex Queries

    Dear SDNers,
    Can we create a single universe on Multiple cubes or DSOs or BEx Queries and how do we do this?
    Can you plese tell me step by step.
    Thanks,
    Swathi.

    Hi swathi,
    yes, we can create multicubes from single universe from webi rich client/deski, create a single report  from BEx Query it makes as single micro cube.
    and Next Edit Query--> Add Query--> select same universe.  This Query makes as another Micro cube.   so you can design a report from those Microcubes. if you add additional object to query panal the microcube updated from data base.
    This Link help for you,
    [http://reports.is.ed.ac.uk/areas/itservices/busintel/TrainingMaterials/advUser/Lesson6-Step1.html]
    Thanking you,
    Praveen

  • OLAP Universe and Voyager connection on BW Queries

    Hi,
    I have successfully created an OLAP Universe and Voyager Connections pointing to SAP BW Cubes. I want to do the same connecting to the SAP BW Queries. But when i get connected to the SAP BW system, I get a dispaly of just the Cubes and I am not able to see any Queries. We have created multiple queries in BW pointing the Cubes. But none of them are listed down.
    Please let me know if this is an issue with the rights given to user which we use for logging into SAP system or some other reason.
    Any suggestions and answers will be really helpful.
    Thanks,
    Suma

    Hi Suma,
    Please check if you have released the BW query for OLE DB for OLAP. Goto properties of the Query and on the Advanced tab see if the check box for "Allow External Access to this Query" is checked or not. If it is not checked then please check that box for the query to appear in your Universe Designer.
    Regards,
    Srikalyan

  • Cascading LOV in BEx Query OLAP Universe + BEx variable

    Hi gurus,
    we have an universe where a Cascading LOV has been defined based on a BO Hierarchy ( based on a BW hierarchy), the OLAP universe is based on a BEx query.
    Now, when the users create a WebI report selecting a value from the value list, the Cascading LOV appears and the user selects the value, descending by the nodes.
    We are analyzing the universe performance and we are testing to add some time BEx variables in the query ( in the current version no variables are used).
    Everything works properly but when we try to select a value from the Cascading LOV and try to select a lower level the webI returns a mdx error indicanting that the time variable is not informed. (WIS 10901: A database error ocurred; MDX query can not be executed: specify a value for the variable Z... )
    We thought that the mdx for the LOV get values from the MD table because in the infoobject definition, it has the Business Explorer Settings:
       Query Def. Filter Value Selection = Value in Master Data Table
       Query Execution Filter Val. Selectn  = Value in Master Data Table
    The Query Execution Filter Val. Selectn  can be defined at the infoprovider also (with the provider specific Properties of the infoobject) and also at the query, whe have not modify none of them.
    My first question is which settings has efect at OLAP Universes, the infoobject settings; the infocube settings or the query settings ?
    Are the Cascading LOV integrated with BEx Query OLAP Universe?
    Is it an application error?
    Many Thanks in advanced.
    Best Regards,
    Nuria

    Hi Ingo,
    many thanks for your quick answer.
    That was one of the possibilities we have analized but the problem is that the user has to inform the hierarchy level for all the reports, that kind of variables is translated in the universe as a prompt
    Now we have only one universe and some business analists users create reports themselves for the business area based on that universe.
    The users create WebI filters without prompts,just filtering the hierarchy node. If we add the BEx variable then the user sould inform the prompt for all the reports based on that universe.
    We want to avoid that prompt, we have several hierarchies in the query for different infoobjects.
    Thanks again.
    Best Regards,
    Nuria

  • Olap universe(creating new object)

    All,
    I am using bo 4.0 version and i have created an olap universe on top of bex query.i am new to olap universe.
    I have a need to create a new customized object in my olap universe out of two existing objects.As of now i am creating variables in my webi report generated out of the olap universe to fit my need.Instead i want to create a condition object or some kind of object in the universe itself.
    how can i do this?Any ideas or suggestions.
    For ex:
    my requirement looks like this,not exactly the same as indicated below but similar.
    existing objects
    city object has certain values 'hyd','new york'
    currency objecthas 'rupee','dollar'
    new person object out of the above mentioned existing objects
    if city='hyd' and currency='rupee' then 'indian' else 'non indian'
    how can i do this?Any ideas or suggestions.
    Regards,
    Reji.
    Edited by: reji2011 on Dec 7, 2011 11:10 PM

    Hi,
    there's a function builder / formula editor in Universe Designer, with OLAP universes this uses MDX syntax with XML markup.
    to build up some logic, you need to use the "IIF" operator.
    regards,
    H
    p.s.  in BI 4.0,   route-one should be the BICS BEx connection, not the OLAP .unv ..

  • How Many SAP BW BEx Queries can be embedded in a Universe

    Hi,
       I need to create 5 reports based on five different SAP BW BEx Queries. These are charts with 3- axes i.e. X,Y,Z.
       The example requirement is to create Line charts (Vertical Mixed Line Charts) and deatils are as follows: The chart should show CPU Utilization % for different servers (eg. Servers1,2,3,4,5) for each day in a particular month.
    Axes details:
    X- Axis - Date eg: 01 /09/2010 to 30/09/2010
    Y-Axis - CPU Utilisation Percent
    Z-Axis - Servers from 1 to 5
    The above detailed chart comes from a BEx Query . In this way there are four more BEx queries which should give four other charts.
    My query is: Is this possible to have five different BEx queries in a single Universe and Create 5 different charts(one chart from each BEx Query) in a single tab as in the current manual report.
    (All the five Line charts should be downloadable to a single sheet in Excel)
    One more, should I use Web intelligence only? Is any other tool that helps for this requirement.
    Please advise.
    Nanda Kishore.
    Edited by: Nanda Kishore B on Oct 13, 2010 4:17 PM

    Answers for your qns:
    Is this possible to have five different BEx queries in a single Universe ?? NO
    Create 5 different charts(one chart from each BEx Query) in a single tab as in the current manual report. ?? YES
    All the five Line charts should be downloadable to a single sheet in Excel ?? Possible- YES
    should I use Web intelligence only? *WebI * or  Data Federator
    Nanda Kishore,
    As you are in SAP BI, I suggest you to go with BO Universe==>>WebI or DataFederator.
    Solution for your problem:
    Sol1 : Why you are creating 5 BEx queries?? Is there any calculations or restrictions??
    YES, then Design 5 Universes for each BEx query.
    @ WebI Report: Develop report/chart based on Universe-1 and in BO query panel click on Add Query and do it for 4 other Universes.
    Save all Charts in single report. (After running second time query, it will prompt for 3 opt's: 1. Insert new report  2. Insert data with in the existing report 3. Indulge objects without creating new report )
    Here, go with Opt:2 or Opt3 or opt:1, no problem. And develop all Charts in single report by just dragging & dropping chart type and objects to it.
    Now your problem solved.
    Sol2: If no need of 5 BEx queries: Just drag all the Characteristics, Keyfigures and other what you want for Charting.
    @Designer: Design Universe on top of this BEx master query.
    @ Report : use this Universe and drag objects to 5 diff charts.
    Hope you got it.
    Thank You!!
    Sent from iPhone

  • Load Balance guest Internet access via two different DMZ zones at two sites

    Hi Sir,
    My customer has the following unified wireless guest access requirement:
    - There are 2 internet links and dmz zones at two different locations, Site A and Site B
    - Data centre is at Site A
    - WiSM is proposed to be installed at the Cat 6500 in Site A
    - Lightweight AP are distributed across Site A, Site B and other branches
    - Only one anchor WLC is proposed at Site A, DMZ zone to provide guest internet access
    My customer would like to load balance the guest via the two internet link at Site A and Site B but with the same SSID across all locations. Can it be done since only one anchor at Site A? How about puttting another anchor WLC at Site B, DMZ zone? But how can i establish two EoIP tunnel to two different anchor WLC from a single WiSM?
    Thanks for your help
    Delon

    You can... but you can't control where the traffic will flow. The wlc will determine which DMZ wlc it will use. The wlc will load balance, but traffic in site A might go to site B. I currently have deployed that senerio in multiple client installations....

  • Updating OLAP Universe Automatically

    hi,
    We have created Universes on the top of BEx queries. What happens in BEx query is that some of the column headers are getting updated every week. Beause of this everytime we have open the Universe refresh and export it back. This recurrent activity is very cumbersome. We are using BOXI 3.1.
    So can we automatically refresh an OLAP Universe?
    Thanks
    Aravind

    Hi,
    bespoke mean 'customised to your personal requirements'
    SDK is the development kit/kernel for extending the APIs used by our products.
    start here on SDN, developer library http://www.sdn.sap.com/irj/boc/sdklibrary
    this is purely for C or Java developers,  custom-code is not supported nor maintained by SAP etc.
    regards,
    H

  • Can I create one single  crystal report using 2 bex queries

    HI all,
    I have 2 bex queries and has to develope a single crystal report .Is it possible???? If so, than how to connect two bex queries  and develope  one single crystal report.Any other option is also fine. I mean ....no need to use crystal..( I can go for one single webi..).But need to know the approach ...
    or else...can I create universe on 1 bex and other universe on other bex ..and go for one single webi report..
    Only problem is client is particular about one single report(either crystal or webi)
    if i go for webi ...I know we can use link universe option but I dont know whether it works fro OLAP environment.
    Please let me know if I can link OLAp universes and go for 1 single webi report.
    Any help is appreciated.
    Thanks in advance,
    Mahathi

    You can use either CR or WebI.
    In CR Designer create the report using the SAP toolbar (Create report from query) based on the 1st BEx query. Then use the Database expert (first entry in the Database menu) to add an additional connection to your 2nd BEx query (+Create new connection->SAP BW DX query). You can then join the results of the 2 different queries in the database expert also.. Please note that if you do NOT want to join the result sets, then it is more efficient to use subreports. Create two different CR reports, each based on one of the BEx queries and then use one of those as your main report and insert the other one into it as subreport. Once embedded you do not have to keep the separate .rpt file of your second report.
    For Webi you must build 2 universes, each based on one of your BEx queries. In your report you can add multiple queries based on different universes. You can join the results sets here by using the Merge dimensions button in the report editor area.
    Regards,
    Stratos
    PS; Keep in mind that joining a large number of rows at report level (either in CR or WebI) can cause performance problems. If this is your requirement, how many rows do you expect to get back from each individual query?

  • Crystal Report with multiple BEX queries

    I have a Crystal Report that uses 6 different BEX queries.  The report needs to display the results from each query, there is no need to join these queries.  The Crystal Report is using subreports and displaying the data one BEX query after another.
    The issue I have is that these BEX queries all have the same mandatory variable.  This is causing Crystal to prompt the user to enter the same variable filter once per BEX query.  
    If we change the BEX queries so only the first BEX query has a variable and use Crystal to filter the other 5, the performance is unacceptable.  My guess is the other 5 queries are experiencing client side filtering instead of the filter being passed down to BW.
    Is there a way to have multiple BW queries with the same variable and have Crystal only prompt the user to enter input one time?
    Thanks,
    Andy

    Hi Andy,
    My understanding of the issue is :
    --You have 6 Bex queries and are displying on after the other becaused you have inserted all these queries as sub report.
    --All your Bex queries are having same parameter / prompt / variable which will take user input and filter the data.
    --Now the report is prompting the user to enter prompt / variable 6 times.  You are looking for an option to proimpt only ones insted of 6 tiems.
    If I understood correctly follow the method to link sub reports to grab the parameter value form main report parameter :
    Right click on sub report go in Change Subreport Links, select main reort prompt / varieable and then select sub report prompt / parameter / variable.
    Do the same for all your sub reports.  This will eliminate asking / prompting the same parameter value several times.
    Thanks,
    Sastry

  • OLAP universe on top Bex query

    Hi all,
    I have a Bex query with a single mandatory Hierarchy variable. This hierarchy variable was created over GL Account infoobject. I have to different active hierarchies.
    I generated a OLAP universe based on this Bex query.
    The problem is it doesn´t generate any sub-class for hierarchy and for level objects.
    I can't see any filter in OLAP universe GL account dimension.
    Any ideas?
    Thanks in advance
    Regards
    David

    Hi Ingo,
    Thanks for your help.
    Yes, I can see both hierarchies in result set when I run the query in RSRT.
    Both hierarchies are not time dependent and very simples.
    I made a lot of test (working with query designer 3x, query designer 7) and to me it is a problem with integration kit.
    There is no filter related to my hierarchy characteristic, nor level generated in OLAP universe.
    Hope your comments.
    Regards
    David
    Edited by: DAVID GALLEGO on Nov 8, 2010 3:45 PM

  • How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

    How can I send email using two different email address that both link back to my one exchange account on my Ipad mini? 
    On my PC I simply have a master return email address and use a POP for the secondary address.  Both are through the one exchange account without a problem.  I need to be able to do the same on my Ipad.

    Ah, I should have made that clear.  My domain didn't come from google.  It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail.  I actually have a bunch of domains (with websites).
    Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such).  Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender.  I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

  • How to link the same horizontal page for two different vertical pages without duplicate them?

    Hey guys,
    Is there a way to link the same horizontal page on two different vertical pages without duplicate the horizontal page?
    I have a doublepage of a book splitted in two parts in different vertical pages but i want link the fullsized image in the horizontal page for both of them. Got that? hahaha
    Thank you all

    Confusing But interesing.
    I think it's possible. I have a idea. It will need one advanced trick.
    To explain it, I need test simply haha.

  • Hello, I want to perform a simple task. I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage

    Hello, I want to perform a simple task.I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage and i have not purchased anything with it. My other Adobe ID account is linked to an email i rarely use and don't particularly want to use. i have tried changing the linked email account to my regular one i use. But it obviously does not allow me because of it already being linked to my other non used obsolete Adobe ID account. Is there any solution to this?? Please help.

    Adobe contact information - http://helpx.adobe.com/contact.html may help

Maybe you are looking for