Linking one Position To All Organizations
Hi All,
I need a way to link common positions like (Driver) to be available for all the organizations in the company.
so that, we will have to create it only once.
Thanks in advance.
position can be linked to one and only organization.
if you require to have one title available for all orgs; you have to go through jobs.
just define the job "driver" and in the assignment screen add this job to all drivers and no need to add positions for these employees.
good luck
Similar Messages
-
One position on multiple organization unit
I see ,one postion belongs to only one org unit (A 003). But Let's assume we have production engineer position(code: 5000100). I want to use this position in Bus production org unit and in Car production org unit. Sap doesn't allow to do this. I don't mean percentage working also i don't mean same employee on different org units. I mean same position-different person-different org units. I don't understand why do we have to re-create same named ,same qualified position again for another org units? So we see a lot of same position in our list. Is there any way to use an already created position with different org units?
I belive U must have two positon. Afterall those two different Org. Units.
For Example:-
We got org units like this
HR , Finance
HR Executive is a positon
Fin Executive is postion
Both are executives but still there is a differene in the similar way you have the differeces
Experts please correct me if i am wrong
Regards -
All Department's should report to one Position
How can I show All Department's reporting to one Position in reportiing structure
please throw some light on this....I ran PPSS Transaction code by giving evaluationpath SAP_ORG when i see in reporting structure Its not displaying....
There are 5 department's report to one position....
I can see PPSS Transaction Code is for diaplay Not able to save evaluation path when I run PPSS...
Could you check once please let me know about this
Sorry, it is the evaluation path SAP_ORG that you need to use. Please check out the details in table T778A.
Hope it helps,
Kind Regards
Christine -
When I back up my library, the pictures do not go to my external HD as albums/pastes, they are copied all together, so I have to arrange one by one to get all organized. It takes too long. Is there any option to organize it automatically? Thanks
If you backup correctly to a correctly formatted drive (Mac OS extended (journaled) )then everything can be restored exactly as it was prir to the backup
How exactly are you "backing up"?
LN -
Transfer one position from One Org unit to another -For multiple positions
Hello All,
I want to know is there any easy way to transfer one position form one org unit to diff org units? I <b>dont want to delete the position</b>, infact I want to transfer the same position (the position Id will remain same) to another org unit.
I need to do multiple positions, hence pls suggest an easy way to do so.
I know it can be done thorugh<b> PPOM -by drag & drop option ,</b> but the transfer record does not get stored in IT 0000 (actions) for the respective pers no.
Hence, I want to easy wat, where we can do it for many positions , aslo the record gets stored in IT 0000. I tired with PA40, transfer action....
but still more easiest way?
Thanks in adv,
N.babuHello Nithi,
Have a look at this link.It may help you.
http://doa.louisiana.gov/hrhelp/content/orgm-changereportingstructuretoadifferentorganizationalunit/cc/html/index.htm
Reward points if helpful.
Regards,
Manoj. -
OM - Many holders one position
Hi All,
I am able to assign many holders to one position, within same validity intervals and 100% assignment,
how is it possible? any thoughts?
also what is the differnce between holder, person and user object types in OM?
KavitaHi Kavita,
It is technically possible that more than one person can be doing the same job 100% of their time.
SAP permits more than one person on the same position.
However, as an SAP Best Practice advice, you should always assign only one personnel to one position as rationally a position refers to the place that person sits in the organization and should be unique to the personnel.
All business partner, central person, person and user can be assigned as the holder of a position. Person is the employee and user is the SAP user name maintained thru SU01 (in case you might not have implemented PA module).
Best regards,
Dilek -
Combining 2 iphones to one pc retaining all data?
Ok, so I have searched far and wide and am frankly pretty shocked that I cannot find information on my question/situation:
My new wife and I are expecting! Yay! So, this means that my basically obsolete destop PC is getting eliminated and the computer desk is getting booted out of the office to make way for a nursery. [Seriously, who uses desktop PC's anymore unless your a PC gamer, which I am not..]
So, what does this mean? My Wife and I both have our Iphone 4's synced/linked to our own itunes librarys on our own computers. Now, my wife doesn't have hardly any music on her itunes, and doesn't care about playlists, playcounts, ratings, etc... but I DO VERY MUCH... so, we need to figure out how to get her iphone along with its apps and data onto my itunes library.
I have found plenty of info around the internet about how to add your iphone to a new computer, but it's all assuming there is no itunes library established on said new computer.
There has to be a legit way for us to consolidate down to one computer with all our library's/devices...?is bumping allowed in this forum? Can anyone offer any help? I tried following these steps that I found on mac-forums...
"So here's the process, this is all done on the new iTunes you want to synch to:
1. In iTunes, get the latest software, authorize the new computer, and download all your previously purchased apps, music, etc.
2. Open the new iTunes, go into Preferences then Devices and select "Prevent iPhones, iPods, and iPads from synching automatically." You DO NOT want to synch when you first hookup your iPhone.
3. Now, hook up your iPhone. When it appears in iTunes under Devices right click and select Backup. You should also be able to backup with iCloud just the same, but I didn't do it that way. Once this finishes you can now backup and restore from this computer.
4. Now go through the menus at the top of iTunes and select all the stuff you want to synch, apps, photos, and such. But not stuff you synch over iCloud. You'll get a message that your iPhone will be erased and it will, click Ok or Proceed or whatever.
5. Now synch your iPhone. It might take a while and when this is done a bunch of stuff will have been erased.
6. Next go back to the left side of iTunes, right click on your iPhone and select "Restore from Backup..." This will take a while too, it will load everything right back onto your iPhone just the way it was before.
7. Last step, do another synch. This time, it won't erase everything as your iPhone is no longer new to this iTunes. Check everything thing over on your iPhone and it should all be back to normal. Now you are synching on the new computer.
If you ran into problems or if this didn't work, you should be able to go to your old iTunes and restore from backup to get your iPhone back to normal."
I tried following these steps, however it seems that "restore from backup" re-sets the iphone to the original computer that it synced too, thus making the process useless in the end.
Any help here??? Main concerns are apps, app data, contacts, emails, texts, stuff like that.
Thanks. -
Problems assigning BP to a position in the organizational structure
I tried to assign a bp to a position in the organizational structure,
but I receive this message "Object cannot be assigned to object CliC
Agent in the period 21.12.2006 - 31.12.9999".
Also, I notice that in the screen, the checkbox where i can select for
the business partner is missing.
However, I can assign a user to the org structure.
Before upgrading, it was working. This is the support packages that it was in.
SAP_ABAP: Level 9
SAP_BASIS: Level 9
PI_BASIS: Level 9
SAP_AP: Level 6
BBPCRM: Level 6
After the upgrade to the following,
SAP_ABAP: Level 10
SAP_BASIS: Level 10
PI_BASIS: Level 10
SAP_AP: Level 7
BBPCRM: Level 7
The assigning of business partner to a position no longer works.Hi,
we're facing exactly the same problem, it was all going well until we went on production.... we applied note 997009 which results in a different error... did you manage to find a solution yet ?
Regards,
Jacob. -
Error message appears when linking one project to another.
I keep having problems linking a captivate project to another project. The projects are saved as .cp files stored in the same folder as all of my other Captivate files. I did publish them to .htm files and it worked.
Why would they not link properly when they are in .cp format? It also gives me a message that states the directory the file is in does not exist. However, I have checked the pathfile name twice and it is correct.
Any ideas what may be happening?The last Captivate version to use .cp format was Captivate 4. So you must be speaking about version 4 or earlier here?
The .cp format is the source project file, not an output format like HTML/SWF or PDF. You may be accustomed to other software apps like MS Office where the output is the same as the source (DOC, PPT, XLS, etc) but Captivate is a different beast.
There's no point trying to link one Captivate project file to another. What you are probably hoping to do is link the OUTPUT from one Captivate project to the OUTPUT from another project. Is that correct? -
Is Pages 5.0.1 is there any way to link one Pages document to another Pages document? If so, Please, How?
Well, you could trade it in for a white one!
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
Hi ,
Any one please help me on why the global navigation links are visible to all group users even after applying a specific target audience group to the link. I Checked , User profile service and User profile synchronizing services
and they are running fine. Test environment is running fine even both the services are not running. Please let me know is any relation should be there between target audience and User profile services?
I am wondering that the Target Audience is not working in global navigation suddenly in production server and the same is working in test server.
Thanks & Regards,
NareshRaju YV,
Infosys.Hi NareshRaju,
Did you add SharePoint Groups to Target Audience ? if yes please refer http://social.technet.microsoft.com/Forums/sharepoint/en-US/7862f182-c6a2-4d2e-9025-b11514575ac3/audience-targeting-for-navigation-link-issue?forum=sharepointgenerallegacy and
you will get solution
Let us now if this helps, thanks
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful. -
Hello,
Can we Extend BizTalk ESB Exception Handling to manage exception for all organization wide application ( both biztalk and external) exception ?
Is it something a good option or there are better approach to do this.
Business requirement is Exception management should be single window for complete end-to end application ( source-Biztalk - destination)
Tarun
TarunHi Tarun,
ESB Toolkit framework for exception handling is not complete OOTB. it is intended as a framework and set of patterns that can and should
be extended based on the customer’s needs.
One way of extending the capabilities is by using Standardized Exception Management or SEM in short.
SEM solution extends the capabilities of the Microsoft ESB Exception Management Framework and follows a design pattern that provides a flexible
approach to exception monitoring and enables error responses to originate from outside of the solution. While SEM is primarily targeted to Microsoft BizTalk Server applications, it can also be leveraged by other applications that are able to call a Windows
Communications Foundation (WCF) or web service.
Refer: Standardized Exception Management
Standardized Exception Management (SEM)
Rachit -
Unable to create position hierarchy in organization model
I was unable to create position hierarchy in organizational hierarchy. I want to maintain position hierarchy within an organization. But SAP CRM is not allowing that. I was able to create organizational hierarchy. Please let me know, how can I maintain the position hierarchy within the same organization?
--hariHi hari,
it is only possible to have a hierarchy with two levels on position level. Therefore you create two positions below your organization (tx ppoma_crm). At one of these positions you set the flag "Head of own organizational unit" at the Basic data tab of the position (To see this, you need to display the Details of the positions at the bottom of the screen). Now you can assign a business partner (or more) to this position which is (are) the Head of this unit.
If you need a more complex hierarchy you have to use organizations to show this.
Hope it helps!
Kind regards
Christian -
Link one iphone to multiple stereos
Hello,
I'm not sure if an apple product would solve this, but I think I remember seeing a video on how to do this a while ago, not sure though.
I need a way to link one iphone, to play on multple stereo systems, such as vehicles. This could maybe work with bluetooth, but when in vehicels the signal is not strong and wide enough. Is there some way to do this with airport or something?
Thanks.Hello PLCman,
You can achieve this by connecting the same signal to the trendWidth datamembers of all the HyperTrends.
For example, if you are using a Pot1 to scroll (by connecting it to the trendWidth datamember), you would connect the same Pot1 to the all other HyperTrends' trendWidth datamembers.
Hope this helps,
Khalid -
HR ABAP - Retrieving the list of positions in an Organization Unit
Hi all,
Could anyone let me know the procedure in retrieving the list of positions in an organization unit?
Thanks,
RajaHi
Go to
SPRO->PERSONER MANAGEMENT->PERSONER ADMINISTRATION-->
DEFINE POSITIONS
There you will find all the postions.
Thanks
thiru
Maybe you are looking for
-
After updating my software my phone will no longer send imessages
My phone will no longer send iMessages ever since I updated to the new software. Does anyone know how to fix this?
-
Can I downdload Snow Leapard from Tiger 10.4.11?
Thanks.
-
Open Configurator embedded in iStore directly from a weblink
We have a requirement to embed the iStore product link in company website. The product is a configurable product, so within iStore, when we click on the product link, it opens up the Configurator model. So, when the user clicks on the weblink, the us
-
Hi All, During the implementation of support packages on our new Solution Manager 4.0, we get the following error during the 'import proper': Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1801 > RFC MESSAGE/ERROR : 104 RFC_ERROR_SYSTEM_FAILURE CPIC-CAL
-
Problem with iPhoto import from camera (gets stuck)
Hi, I am having an issue with an import from digital camera to iPhoto. I've had this camera and this MacBook for years without any trouble. The import I am trying to do has about 1600-some photos and a handful of short videos in it, but most are dupl