Linking PM Notification to different SAP Objects from different SAP Components

Hi All,
I have a requirement to link notification to three follow on actions namely:
1.     Work order creation (IW31?)
2.     PPM to create project
3.     Change request to review document (CC31?)
These activities are actions required from Root Cause Analysis. RCA is being done by an external system. An interface is to be used to create a notification in SAP PM. The notification is to be configured with an Action Box containing these three activities as follow on actions.
Is this possible to achieve? And if so, what FM can be used for each of the three SAP Objects?
Will there be a link between the three created objects and the Notification?
Will it be possible to update the Notification with the statuses of any one of these three objects automatically?
Your response would be very much appreciated.
Kash

Kash
Not sure this helps, but we managed to link a notification to multiple objects using a development in Services for Object.
You were then able to see these links as follows:
Useful info
Useful info 2
I used function module BINARY_RELATION_CREATE_COMMIT with the following:
OBJ_ROLEA-OBJKEY = full notification number
OBJ_ROLEA-OBJTYPE = BUS2038 (for notification)
OBJ_ROLEB-OBJKEY = full plan number
OBJ_ROLEB-OBJTYPE = BUS1020 (for maintenance plan)
RELATIONTYPE = ASGN
PeteA

Similar Messages

  • Linking PM Notification to SAP Objects from different SAP Modules

    Hi All,
    I have a requirement to link notification to three follow on actions namely:
    1.     Work order creation (IW31?)
    2.     PPM to create project
    3.     Change request to review document (CC31?)
    These activities are actions required from Root Cause Analysis. RCA is being done by an external system. An interface is to be used to create a notification in SAP PM. The notification is to be configured with an Action Box containing these three activities as follow on actions.
    Is this possible to achieve? And if so, what FM can be used for each of the three SAP Objects?
    Will there be a link between the three created objects and the Notification?
    Will it be possible to update the Notification with the statuses of any one of these three objects automatically?
    Your response would be very much appreciated.
    Kash

    Hi Maheswaran,
    Thank for your response.
    I am looking beyond work order. I know this is standard from PM Notification screen. However, any possible linkage with other objects like Change Request, Project etc.
    Regards.
    Kash

  • *How to Delet one same object from different roles*

    I need to delete one auth object from different roles, Couls any one please advise me how can i do this and if there will be any complications involved with tis.
    Best regards:
    Maq

    In PFCG, it may be that you have added some objects manually. To remove them you will have to go to pfcg.
    Even if you first remove the objects from su24, you will have to go to all the roles through pfcg to generate them in expert mode by selecting the third option (edit old status and merge with new data)

  • Is it too much to ask from apple, an option for different volumes levels from different apps, including alarm, text, email, basically from every posible app?

    Is it too much to ask from apple, an option for different volumes levels from different apps, including alarm, text, email, basically from every posible app?

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Upload documents to filenet p8 for sap objects from SAP

    Hi..
    Appreciate if anyone can let me know the process of uploading documents to Filenet P8 from SAP for relevant SAP objects.
    This will also create the link to object and document in the SAP LINK tables..
    Any documents are urls related to this topic are appreciated.
    Thanks.

    Hi,
    The EMC Solutions design center offers a free SAP storage sizing regardless of your current storage vendor.   It can be as easy as providing SAP Earlywatch reports.  See https://community.emc.com/docs/DOC-11310  If you are just looking for the incremental needs from the upgrade to the new release, that is more specific to SAP and your config.  Good Luck

  • Importing Objects from Different Server

    Hi,
       I would like to know is there is any way to import
    the objects (like tables , progams) from a different sap server to my sap system without establishing STMS(Transport Management System).
    Looking for your views..............
    Regards,
    K Vijayasekar.

    Hi Vijayasekar,
    I'm not an authority on this, but I can think of one good reason why it cannot be done.
    If you do not have the TMS between the two SAP systems, then how can the system resolve the possible naming conflicts and perform the consistency shecks?
    For example, let us say you want to import a database table (some 'Z' table) into your target system. Now there are quite a few things that have to be ascertained before the import can be done - does a table with the same name already exist in the target system? are all the data-elements and domains used by this table available in the target system? etc.,
    There might be some other checks required, but I'm not certain of the specifics.
    In summary, I don't think it is possible to import without passing through the TMS. May be it should not be possible to do so unless there is a very strong alternative.
    Regards,
    Anand Mandalika.

  • Accesing same object from different servlets

    Hello all!
    I am developing a web control project. I am using a simulator of a factory (with java). The engineers are supposed to be able to change some variables from the web.
    I am using servlets to change this variables. My problem is that, to be able to change variables, I need to create an instance of this FactorySimulator object.
    If each servlet ( there are many servlets) calls an instance, they will be updating different FactorySimulator objects.
    How can I make reference, or have acces to the SAME object, from any servlet?
    Thanks! I hope my question is clear =)

    package com.yourcompany.somepackage;
    public class TheFactory
        private static FactorySimulator factory = new FactorySimulator();
        private TheFactory() {} // Static methods only, do not instantiate TheFactory
        public FactorySimulator instance()
            return factory;
    }From each of your servlets you can call TheFactory.instance().doWhataver(). Methods in FactorySimulator need to be suitably synchronized of course.

  • How to access form objects from different class?

    Hello, I am new to java and i started with netbeans 6 beta,
    when i create java form application from template i get 2 classes one ends with APP and one with VIEW,
    i put for example jTextField1 with the form designer to the form and i can manipulate it's contents easily from within it's class (let's say it is MyAppView).
    Question>
    How can i access jTextField1 value from different class that i created in the same project?
    please help. and sorry for such newbie question.
    Thanks Mike

    hmm now it says
    non static variable jTree1 can not be referenced from static context
    My code in ClasWithFormObjects is
    public static void setTreeModel (DefaultMutableTreeNode treemodel){
    jTree1.setModel(new DefaultTreeModel(treemodel));
    and in Class2 it is
    ClasWithFormObjects.setTreeModel(model);

  • Registry.lookup() return Remote object from different ip address

    I've got this error using
    Registry reg = LocateRegistry.getRegistry(serverName, Registry.REGISTRY_PORT);
    service = (ILogin) reg.lookup("service");and when I use debugger I've got this
    RegistryImpl_Stub[UnicastRef [liveRef: [endpoint:[10.240.161.66:1099](remote),objID:[0:0:0, 0]]]]
    Proxy[ILogin,RemoteObjectInvocationHandler[UnicastRef [liveRef: [endpoint:[10.240.161.54:2074](remote),objID:[-4308ea07:116adade605:-7fff, 9133145996543447416]]]]]Why the Registry return a service from different IP address ?
    I've run this code for several times and it works. But today it cannot connect to the RMIServer.
    Any idea ?

    Thanks, i found my missing prppertis is
    // optional. Defaults to localhost. Only needed if web server is running
    // on a different host than the appserver
    props.setProperty("org.omg.CORBA.ORBInitialHost", "localhost");
    // optional. Defaults to 3700. Only needed if target orb port is not 3700.
    props.setProperty("org.omg.CORBA.ORBInitialPort", "3700");
    to set the port and host back

  • I downloaded a program and it never shiowed up in the download box. I can't find it anywhere on my computer. I tried it a few different times and from different sites but still nothing. What can I try next?

    I downloaded a program several times and from different download sites. It never showed up in the download box but it said all downloads have completed. I searched for it anywhere on my computer but the search produced no results.

    I suppose there is a possibility that you have security software than may be blocking quarantining or even deleting the downloaded file.
    Normally if Firefox says in the download manager that the file is downloaded then it is on your computer, and if you right click you should get the option to open the folder the er the downloaded file is in.
    #Use keyboard keys '''Ctrl + J''' to open Firefox's download manager
    #* or use ( press''' alt''' to display the menubar) Tools -> Downloads
    # in the downloads window find the file entry you are looking for and right click
    # use the option ''open containing folder''
    * see [[downloads window]] <-- clickable link --
    * and [[unable to download or save files]]
    Please post back with how you get on.

  • Triggering SAP workflow from non-SAP system

    I am trying to use WF-XML to trigger a workflow in SAP from non-SAP system. 
    I have already created a workflow template in SAP and want to test the scenario if this will be really hit by the incoming xml message.
    Questions:
    1. How the data from incoming xml is tranferred to workflow container element? IF system does it, how is done? If not how to address it?
    2. Do we have some tool here, to simulate this situation - to create a test xml incoming message with SAP and really see if that triggers the desired workflow template. Pupose is testing the scenario first in SAP and then going to the other system to test the real interface.
    This is somewhat similar that we see in incoming IDoc. In Idoc we can simulate the incoming IDoc structure and test.
    Is any one here who can guide on this?
    Thanks in advance.
    Rgds.

    Hi,
    You don't need a triggering event. In the xml it says which workflow should be started. You don't need a class to fill the container. The service does this.
    I think there is a way to generate an example xml but I don't know exactly how. In the <a href="http://help.sap.com/saphelp_nw70/helpdata/en/54/de9e3887d6174fe10000009b38f842/frameset.htm">SAPHelp</a> there are some examples of the documents. Check also the entry above it about the creation of a WF_XML document. In the first and third example it shows a container element and its value (QUESTION).
    Try to get a copy of the book "Practical workflow for SAP" by Alan Rickayzen. It has got a part about this.
    Also check this link from the SAPHelp:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/e8/ea8d380be34e6ce10000009b38f842/frameset.htm">Call Tab Page</a>
    Regards,
    Martin

  • Data load into SAP ECC from Non SAP system

    Hi Experts,
    I am very new to BODS and I have want to load historical data from non SAP source system  into SAP R/3 tables like VBAK,VBAP using BODS, Can you please provide steps/documents or guidelines on how to achieve this.
    Regards,
    Monil

    Hi
    In order to load into SAP you have the following options
    1. Use IDocs. There are several standard IDocs in ECC for specific objects (MATMAS for materials, DEBMAS for customers, etc., ) You can generate and send IDocs as messages to the SAP Target using BODS.
    2. Use LSMW programs to load into SAP Target. These programs will require input files generated in specific layouts generated using BODS.
    3. Direct Input - The direct input method is to write ABAP programs targetting on specific tables. This approach is very complex and hence a lot of thought process needs to be applied.
    The OSS Notes supplied in previous messages are all excellent guidance to steer you in the right direction on the choice of load, etc.,
    However, the data load into SAP needs to be object specific. So targetting merely the sales tables will not help as the sales document data held in VBAK and VBAP tables you mentioned are related to Articles. These tables will hold sales document data for already created articles. So if you want to specifically target these tables, then you may need to prepare an LSMW program for the purpose.
    To answer your question on whether it is possible to load objects like Materials, customers, vendors etc using BODS, it is yes you can.
    Below is a standard list of IDocs that you can use for this purpose to load into SAP ECC system from a non SAP system.
    Customer Master - DEBMAS
    Article Master - ARTMAS
    Material Master - MATMAS
    Vendor Master - CREMAS
    Purchase Info Records (PIR) - INFREC
    The list is endless.........
    In order to achieve this, you will need to get the functional design consultants to provide ETL mapping for the legacy data to IDoc target schema and fields (better to ahve sa tech table names and fields too). You should then prepare the data after putting it through the standard check table validations for each object along with any business specific conversion rules and validations applied. Having prepared this data, you can either generate flat file output for load into SAP using LSMW programs or generate IDoc messages to the target SAPsystem.
    If you are going to post IDocs directly into SAP target using BODS, you will need to create a partner profile for BODS to send IDocs and define the IDocs you need as inbound IDocs. There are few more setings like RFC connectivity, authorizations etc, in order for BODS to successfully send IDocs into the SAP Target.
    Do let me know if you need more info on any specific queries or issues you may encounter.
    kind regards
    Raghu

  • How to manage non-SAP objects types with SAP Netweaver ?

    I would like to know how it is possible to integrate into the SAP software configuration managment tools (NWDI CTS, CTS+...) non-SAP objects like shell scripts or SQL requests ?
    These shell scripts are, for example:
    - external host scheduler jobs
    - general scripts for start/stop application
    - parameters needed by application at the os level
    My goal should to store into a DEV SAP system these objects, in order to take benefit of SE80 version management. So, it should be possible to create transport order in SE10 and to transport these non-SAP objects in test and production system.
    Thank in advance for your answers.
    Daniel Ouin

    the standard functionality for this up until 4.72 is to call RFCs/BAPIs through a RFC binding library for the third party software, e.g. the language of your choice is PHP then you use the PHP RFC library found [here|http://saprfc.sourceforge.net/], if you have to connect from a .NET environment you might try to get the SAP .NET connector.
    anton
    PS: RTFM and/or using the search facilities here on SCN would help you a lot with your task.

  • Extract Tables/views into ECC 5.0 SAP system from Non-SAP system

    Hi,
    I am looking for some inputs on how to set up the following scenario of extracting data stored in tables/views in a non-sap external system into my SAP ECC 5.0 SAP database.
    Currently we are using a middleware between SAP and the external system to fetch data. I would like to get rid of the middleware and set up a scenario to call this non-sap external system and pull data stored in views into our SAP system directly. Is that possible in SAP version 5.0? If yes let me know the steps to be performed... do I need to set up XI ?

    maybe you can access sap data using some connector such as java or .net connector.

  • Problem in moving object from one SAP system to another....

    Hi,
    I have created a transport request in System A client 800.
    I am trying to move the Transport request to System B client 900.
    (Note: A and B are different SAP systems)
    I first release the object going in system A client 800 using transaction se09.
    Now I go to System B client 900 and then to transaction STMS. After this I click on display import queue for System A inside transaction STMS in System B. Then I go to EXTRAS ->Other Requests Add. The import queue name is defaulted by System A and then I add the Transport Request number. Then the system asks me to login in Sytem A client 800. I login successfully. But I get an error message:
    "Transport control program tp ended with error code 0247
    Errors: addtobuffer has problems with data- and/or cofile"
    Can someone tell me how to solve this error ? What is the issue ?
    Regards,
    Rajesh.

    Hi Rajesh,
    Check this link:
    tp ended with error code 0247
    http://www-1.ibm.com/support/docview.wss?rs=2366&context=SSZ8F3&dc=DB520&uid=swg21243429&loc=en_US&cs=UTF-8&lang=en&rss=ct2366tivoli
    Solar_migration to different sid
    http://www.sapfans.com/forums/viewtopic.php?p=790715&sid=3528f52126b6764d5cb28acb67f752fe
    http://www.sapfans.com/forums/viewtopic.php?t=221340&view=next&sid=0e5e06508287d3f738bc97ce7aea8426
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/transport-request-to-import-queue-with-error-740676
    Hope any of this link helps you out.
    Regards,
    Vivek

Maybe you are looking for