Linking to a phone dialer in Muse

In the new videos about how to create mobile versions of your site, both instructors show that you can add a "click to call" feature to the phone number. This allows the person visiting the site to just tap on the phone number to bring up the phone's dialer. However,  neither one shows how to do this. I've looked in the links menu and there is no option for a phone dialer (and yes, I'm in the phone version of the editor). How do I do this?

I am having trouble with this myself.  I thought it was a matter of just simply putting the phone number  555-555-5555 into the links bar where it says "add or filter links".
So I highlighted some text and linked it to that number..
But that did not work, as i tested it out on my mobile. 
so then I tried to enter this into the links bar:  mobile: 555-555-5555.
That did not work either.
I know for the text feature you put in "sms: 555-555-5555" and that does work.
So I am lost as well. 

Similar Messages

  • IPhone 5S lost voicemail and when I tap vm icon the phone diales voicemail and gets busy signal.  No other options show.

    iPhone 5S lost voice mail and when I tap vm icon the phone dials voice mail and gets busy signal.  No other options show.
    started yesterday.  No voice mail at all.  When I tap the voice mail icon the phone immediately dials some number and that number rings busy.  I can't select anything else.   Using Virgin mobile/  I am stumped.
    I have already tried a soft boot... power and home button....
    Help!

    Other than changing the SIM card, you don't mention any troubleshooting you did with your phone.
    If you haven't already, try the following steps as needed:
    Settings > General > Reset > Reset Network Setting.
    Reset phone - press both home and sleep/wake buttons until the Apple logo appears.
    Restore phone in iTunes using a backup
    Restore in iTunes as a new iPhone
    IF the last step doesn't fix it, there is a hardware problem and you should make an appt. with an Apple Store Genius Bar. The fact that you haven't dropped the phone by no means rules out hardware issues.

  • Is it possible to edit a number in the phone dial keypad or we have to wait till iOS 12?

    I use an iPhone 5c and and i've been waiting for a cursor on the dial pad after every iOS update since I started using an iPhone.
    one most annoying thing is realising you omitted a number from a long phone number or a recharge code, you have to clear all and start again.
    Check the image below, If you want to insert the number 2, you'll have to clear everything, and start all over.
    One more thing is number suggestion or smart dialling; if I wanna call 'Joe' in my contacts, shouldn't I be able to press 5-6-3 to get names suggestions within that number combinations?
    Why does Apple want to wait for iOS 12 to do this? Do they ever check other phone OS? I love iPhone but sometimes its hard we have to wait for two years before they introduce some simple feature that already existed.
    Just because they're focusing on new groundbreaking features doesn't mean they can't make that possible?
    We know its impossible for Apple to put FM radio in the iPhone because they want to sell the iPhone 8 with a new fm radio feature; but a better dial keypad, come on!! Make some upgrade.
    My question here is... is it possible for Apple to make the phone dial pad editable aside Copy/Paste options or make it suggest names when u start dialling; or is there a Setting I need to change to make that possible?

    Hi ChrisJ4203,
    I see you didn't comment on editing the numbers in the keypad, I believe you have that problem too but you forgot to click "I have this question too".
    By the way I've sent a couple feedback messages to Apple already and thanks for reminding me, I guess I'll have to be doing that more often.
    Enjoy your day

  • How can I disable a hover link in the phone view size?

    Hola
    How can I disable a hover link in the phone view size?
    I got this site where I got a gallery page,
    the pics have a hover/link state (?) where as you click in them
    they will open a bigger pic. (Prettyphoto)
    Thanks good.
    What I want to do, is that the hover state (?)
    won't show in the phone size.
    I know that I will need a media queries, but I'm not sure
    where or how to tackle this problem.
    This is the code where I have the pics
    <div class="grid_3 project-item bar">
                                             <figure class="project-img">
                                                 <img src="../images/gallery_pics/memos_bar_s5.jpg" alt="Memo's Cocina & Tequila Bar" />
                                                    <div class="overlay"></div>
                                                    <div class="mask">
                                                       <a class="icon-image"
                                                            href="../images/gallery_pics/memos_bar_b5.jpg"
                                                            rel="prettyphoto[gallery]"
                                                            title="The Bar">
                                                            <i class="icon-search"></i>
                                                     </a></div>
                                           </figure>
                                          </div>
    Thanks for your help

    If you don't want a :hover state to show in the phone css of a fluid grid layout, you would remove it from the global settings and only include it in the tablet and desktop media queries.
    Or are you trying to do something else?

  • Unable to get Phone Dialer working

    Hello everyone,
    I have setup a brand new client. And I am unable to get the dialer working correctly.
    I have followed the directions here: Re: The Top10 most frequently asked questions and answers (FAQ) January 2009
    - Telephony service is started
    - Windows XP Phone and Modem settings correctly configured
    - Phone Dialer does work and does show the progress of the "manual" test call
    - Phone Dialer is running and minimized
    - SAP/b1 General Settings/Service is setup with an area code.. nothing needed for an outside line
    When I pull up a Business Partner and hover over a phone number, I hit CTRL+TAB and nothing happens... the next field is just highlighted and no dialing occurs.
    Any thoughts as to what I'm missing to get this working correctly?
    All input is welcome.
    Thanks!
    ~ terry o.

    Finally got this working. Please setup your dialer using these directions;
    - Telephony service is started
    - Windows Phone and Modem settings correctly configured with any required settings like area code or country
    - Run Phone Dialer (dialer.exe) and confirm it does work and does show the progress of a "manual" test call
    - Change SAP/b1 General Settings/"Service" is setup with an area code.. and outside line requirements
    Open SAP/b1 and hover your cursor over a phone number. When the "phone" icon is displayed, press "CTRL + double-click".
    The dialer should open and you should see the progres of your call.
    Good luck!
    ~ terry o.

  • How do i create a link to an Anchor in Adobe Muse so that i can add the link in an email?

    How do i create a link to an Anchor in Adobe Muse so that i can add the link in an email?

    Create your anchor normally then in your email for example if your anchor is on your index page your link would look like http://www.yoursite.com/index.html#youranchor

  • IMessage issue to be linked to my phone number

    Dear Apple Support team,
    Recently I have changed my phone operator along with my iPhone to the new i5s and been facing some issues to activate my iMessage along with my phone number. It works perfectly via my Apple ID but no link to my phone number which is very annoying. I have checked in the phone and noticed that under "My Number" it shows UNKNOWN and I reached my operator "Omantell" about it and they told me that they cannot do anything about it because this feature is blocked by Apple!
    Is there any way to unblock this feature so I can identify my phone number and use iMessage normally.
    Your support is highly appreciated!

    Hi gracefromsa,
    Check your settings: Settings>General>Messages> click on Send and Receive, scroll down to where it says "Start New Conversations From"....
    If your email is checked there, then check your Phone Number instead.
    Cheers,
    GB

  • Call microsoft phone dialer from forms

    Has anyone included the phone dialer in their forms application either with activeX or tapi.dll? Please tell me what to do. Thanks.

    I want to do something similar to what is being asked for here. I would like to use javascript radio button to determine which of a list of Oracle BI reports loads in a dashboard section.
    Choose Report to view:
    * - Report One
    - Report Two
    - Report Three
    - Report Four
    === REPORT SECTION ==============================
    Report One is shown by default, but changes when radio button is moved.
    Can someone give me some example code of how to do this?
    Thanks in advance!

  • Hello Apple I work in one of the shops phones in the Kingdom western Saudi Arabia you now restore a backup to the customer by mistake recovered to copy another client now been linked to the phone and ask me to check, I do not know PIN number

    Hello Apple I work in one of the shops phones in the Kingdom western Saudi Arabia you now restore a backup to the customer by mistake recovered to copy another client now been linked to the phone and ask me to check, I do not know PIN number
    <Edited by Host>

    These are user forums. You are not speaking to Apple here. I'm sorry but we cannot assist you. Contact your Apple vendor in your country. Customer Service: Contacting Apple for support and service - this includes international calling numbers.

  • Anyway to disable Smart Dialing and add Edit before dial in phone dialer

    Is there any way to disable Smart Dialing in OS 10.2, my old BB with OS 7 can set the country code to "null"
    The feature is annoying as in Greater China, we have have 1 sim card with 4 nnumber for HK, China, Taiwan and Macau all with different country code.  The smart dialer alway add the country code to the phone number and call dial unsucessful.   
    Also in old OS 7 it allow edit before dial, but in OS10.2 I can never edit a phone number after paste in phone dialer, since here we always need to change country code, area code, add a "+" etc 

     I would suggest what you mentioned as blackberry can support multiple numbers in one contact, so you would only have one contact for say John Smith... but a contact for in country and out of country. Aside from that, I dont believe there has been an app developed for this specific issue.
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

  • Hyperlinking/activating a phone number in Muse

    I want people who visit my site to be able to touch the numer and have the option to call. Can someone please help me, Adobe MUSE customer service is absolutely horrible!!!!!!!!
    Thank you!!

    Just put the number as you would do so in a typical website. It's the moible browers that recognise the fact it's a phone number, not Muse dictating the fact via code.

  • How to send a link to a phone for downloading

    Sorry for the obvious noob question, but I've been plaing with win32 forthe last 2 years. I have a basic jar and jad that work on the emulator, but my phone still doesnt have an easy drive type file upload system.
    I can put the jad and jar in a web directory and goto the jar with the phones browser but not the jad. How do I package these and design the web link so the phone will download it? and store it in the applications?

    Hi,
    create simple .wml page to be browsed using WAP browser of the phone:
    <?xml version="1.0"?>
    <!DOCTYPE wml PUBLIC "-//WAPFORUM//DTD WML 1.1//EN" "http://www.wapforum.org/DTD/wml_1.1.xml">
    <wml>
    <card id="Sucrerey's homepage" title=" Sucrerey's homepage ">
    <a href="http://IPAdress/MyApp/MyApp.jad">MyApp</a>
    </card>
    </wml>Then make sure the .JAD file points to proper .JAR file. Your best bet is to use absolute path:
    MIDlet-Jar-URL: http://IPAdress/MyApp/MyApp.jar
    Storing in the applications depends on phone implementation.
    HTH,
    Peter

  • How does a linked PDF show up in a Muse site?

    If I link to a PDF from my Muse site, will the user be able to see the complete full-size PDF in their browser, or will they have to download it? I want them to be able to just view the PDF without having to download and save. Thanks!

    Most modern browsers have PDF support built-in, so a user would be able to view the PDF as soon as he clicks on a link to .pdf through his browser instead of being prompted to download.
    Thanks,
    Vinayak

  • Where is "phone dialer"?

    I have a love/hate relationship with my 8330. I love it but it is so frustrating. I would like to use the letter shortcuts but I can't figure out how to turn off whatever it is in "phone dialer." I don't know where phone dialer is. EVERY key seems to go to address book.
    I watched the tutorial and I even bought a book but I am still tearing my hair half the time. 
    Solved!
    Go to Solution.

    Hi and welcome to the forums!
    beachgeek wrote:
    I have a love/hate relationship with my 8330. I love it but it is so frustrating. I would like to use the letter shortcuts but I can't figure out how to turn off whatever it is in "phone dialer." I don't know where phone dialer is. EVERY key seems to go to address book.
    I watched the tutorial and I even bought a book but I am still tearing my hair half the time. 
     Green key, then from the phone screen, menu key, select options, general options. Scroll down to dial from home screen
    This gets you dial from the home screen.
    Back to the same path to Phone options, general options, phone list views, can be set to "name".
    This lets you type "R" and get users starting with "R".
    Is this what you are looking for?
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • How to put webpage in separate folder but linked to menu bar in adobe muse?

    How to put webpage in separate folder but linked to menu bar in adobe muse? Need to do this because I want to make this page password protected from the rest of the website.

    Hello,
    While uploading only that page from Muse to your host, use the "Host Directory" option to upload it to a different folder. You can choose to upload selective page by disabling/enabling "export page" option for the pages from plan view in Muse, as shown in this screenshot: http://screencast.com/t/vpuIEjtVdZRS
    To link selective pages to the menu, use "Manual" menus. This will allow you to link any page to the menu, even an external page. You can change the menu type from here: http://screencast.com/t/Ej8x2KrJ
    Hope this helps.
    Cheers
    Parikshit

Maybe you are looking for