Linking two DEV systems

Hi gurus,
We got two DEV systems ("DEV old", "DEV new"). Basically "DEV new" is the copy of "DEV old". They copied the system about 3 months ago. During this period of time, we still developed on "DEV old". Now we were told to move to "DEV new". They said they've setup the transport connection. I need to do a little thing in DEV new before I can transport from "DEV old" to "DEV new".
Can anyone tell me what to do? Thanks!
Jenny.

If you are asking for steps to create a request then go to transport connections -> select the necessary objects to be transported -> drag & drop on RHS then select only necessary info objects & manual & click on package .
once its done then go to se09 then select your request & release .

Similar Messages

Linking two KM systems

Hi,
I want to link two 2004s KM systems.
One KM should be the main system to hold the repository with all data.
The second system should use the same repository as the first one and shall build only a interface to the first system.
The reason why I want to do so is to use the KM API installed on the second system to let a WebDynpro application on the second system search for documents on the first system.
Could anyone please help me how to set up KM to do so?
Kind regards,
Dietmar

Hi,
I have never done it before but you should look into adding external repositories. In the portal you can attach various document locations. This can be your mailserver (a exchange repository), a website or even another KM portal.
I`m not sure but I pretty sure you can add your other KM in you current portal by creating a WEBDAV repository. Webdav being the protocol portalKM`s can talk to each other. Once done you will get an extra KM folder on you current KM showing the complete other KM. (at least if you pick the root)
Go to System ad;ininstration > Knowledge Managment > configuration > Repository managers > Webdav repositories.
Hope this helps
Best
Frederik

Link two Exchange systems

Can't seem to find this exact question via Google.We are physically connected to, but not business associated with another facility. Both facilities share lots of staff and email. The powers-that-be would like the emails that flow back and forth to go across our private fibre for security. Currently, they route through the internet, though they are TLS enabled.We will not be combining domains. Basically, if I email [email protected], the email goes out through the private network. If they email me back, it follows the same path. Regular email goes out to the internet.They are also wondering if it's possible to automatically share address books this way. Currently, we supply each other a .CSV file once a year, and I have a script that crawls the CSV and tells me the additions and removals. Obviously, our directories can be fairly out...
This topic first appeared in the Spiceworks Community

Phil,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

PO No range when we ink two SRM system with One ECC system

Hello Experts,
We have a client requirement to link Two SRM Systems with One ECC system.
In this case what number range we need to maintain in both SRM systems for PO.
-The number range of ECC PO should get update whenver the PO is transferred from any of the two SRM system.
-We have Extended classic scenario.
-Also PO Doc type is going to be same.
Can we handle this by increasing the buffer of the number range in one of the SRM system?
Any idea...pls help urgently.
Best Regards,
Anil
Edited by: anil.s.verma on Oct 1, 2010 4:33 PM

Hello Anil,
Being in Extended Classic Scenario (leading PO being in SRM, R/3 PO number range is concidered as external because PO number is given by SRM), the only solution for you is to:
1- give same number range interval for PO (internal in SRM system 1 and SRM system 2, external number range in R/3), e.g. 3100000000 - 3199999999
2- in SRM system 2, fill in current number with (for example) 3159999999 and let empty (or current value) in SRM system 1
3- assign, in each system for your concerned transaction type, number range as internal in SRM and external in R/3.
In this way, you will avoid overlaping in R/3 between PO numbers coming from SRM system 1 and SRM system 2
Regards.
Laurent.

Linking two ODS objects using a multiprovider

Hello Gurus,
I need to link two ODS objects and both are having 3 common characteristics and the relationship between the two objects are one to many.
My questions would be....
1)When the relationship is one to many can I set it up in the multiprovider to sum it up and show in the report?
2)I have 5 other charaterstics that I need to report(Slice and dice) on, but these are not common ones to both ODS objects. Is it possible for the user to get the report based on these charaterstics also? Or do I need to make sure that these 5 also exist in both DOS objects?
Thank you,
DM

Hi Sh,
Thank you very much for your reply. But I have few concerns.
1)One to many relationship will not have any effect on the data linking since the multiprovider clubs the key figures on common characteristics. I tried this on the system and it worked.
2)The problem would be not having similar characteristics on both infoproviders. So if I want to report on the chars individually it will have a problem( Will come as non assigned values)
But the documentation says the multiprovider supports Homogenous and Heterogeneous cases. Please refer the following link.
http://help.sap.com/saphelp_nw04/helpdata/en/52/1ddc37a3f57a07e10000009b38f889/frameset.htm
I am not sure what I can do now....whether to get all the characteristics in both infoproviders by enhancing the them. Or is there another way?
And lastly the scenario I am looking at is billing and cost of goods. So I might find records in cost of goods which may not have corresponding records in billing.(There can be goods in stock which need to be billed)The problem would be the way multiprovider link records(union) so it will have all the records from both sides even if they do not correspond to each other.
Let me know what you think.
Cheers,
DM

Same logical system name for two productive systems - BW, PI issues

Dear all,
we have a productive system which serves two companies (different company codes). This system is connected both to BW and PI for both companies.
There is a requirement that these two companies must use their own system, so the whole landscape (dev,qa,prd) will be copied to different systems (different server with different system id).
As a result of the above procedure we wll have two different productive systems, as required, but we wll have the same logical system name for the two productive systems, which must be both connect to bw and PI.
However as far as I know:
- we cannot connect systems with same logical system name to BW,PI
- we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
How can we overcome the problem?
Please advice.

> However as far as I know:
> - we cannot connect systems with same logical system name to BW,PI
> - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
Right.
> How can we overcome the problem?
Since you split up systems (or plan to) I highly recommend booking an SLO service (http://service.sap.com/slo). Those people have to the tools and the knowlege to help you. I would not do this on my own.
Markus

SLD: Pointing two business systems to the same client...

Hi Guys,
Is there anyway to make two business systems point to the same client(on the same r/3 technical system)? how about a work around?
Thanks,
Harsh

Harsh,
>><i>Finally all collapse to one client in production.</i>
Even though you will have multiple Business Systems in every envrionment, the final transport will happen from only one environment.
DEV --> QA --> PROD. In this case, objects are moved from dev to qa and then from QA to prod and so, all you will need is the trasnport target created in the QA business systems pointing to the Prod busines system and do the transport.
><i>While transporting to a new SLD(quality to prod) can I choose one transport target for multiple source business systems?</i>
Take a look at this document for multiple SLD transports. Should answer all doubts,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards,
Bhavesh

Two BW systems - one partition/server. How do you divide the resources?

Hi.
We installed a BW DEV system onto a partition of an IBM p570. Roughly 22 GB RAM allocated and plenty disk. Everything was running smoothely until we decided to install a BW QA system on the same partition. Ever since then, the DEV system has become very unstable and hangs and then crashes on a frequent basis. On inspecting the trace/log files, we can see obvious messages about the system running out of SWAP space and then halting sessions/processes. My understanding of the situation is that, when DEV was installed, it obviously "believed" that the 22 GB of memory was exclusively available to it and, now that QA is trying to run and grab resource, the DEV is somehow complaining that it doesn't have the resource that it believes it SHOULD have (in layman's terms).
My question is, in order to get BOTH the systems running optimally (i.e. DEV and QA), what parameters do I need to change/force in order for each of the systems to believe that it now only has 11 GB of memory available? I can only think of checking memory-related parms in the config tool (heap memory, etc.), the PHYS_MEM_SIZE and j2ee/phy_mem_size in the instance profile and then one or two Oracle specific parameters around DB_CACHE_SIZE and SHARED_POOL_SIZE. There are, however, lots of other parameters, e.g. em* parameters, that I can see in the active list (TU02) that appear to be memory related, but I don't know if it is necessary to change these values, or whether they are dynamic.
The two BW systems are ABAP/JAVA combinations (NW2004s) on AIX 5.3 / Oracle 10.2.0.2.
Thanks in advance!
Des.

read SAP note 88416.
I would leave 1GB for OS and provide 21GB for each instance (including Oracle instances)
so basicalyl, size each instance as if you would have about 10GB only available.

Process chain - Two source system issue

Hi Experts,
I face problem when i transport a process chain from BW DEV to Quality.
I have two source systems in Quality ECI and EXS.EXS is a sandbox server(Source system) which we no longer use.
When i transport the process chain from DEV to QA, i get two DTP's automatically added to Process chain in quality for two source systems ECI and EXS whereas i do not want the data to be loaded from EXS client.
I checked the BW dev system, it has only one DTP in the process chain.
Now I want to elminate the other DTP in the process chain in quality.
Please suggest.
Regards,
Srini

I Dont think so a DTP for EXS system has got created automatically when you transport the PC to QA (which actually doesn't exist in DEV).
Please check you DEV system once again, there might a DTP from EXS system also.. other wise go the Release TR and then check the contents-->iif you find two DTP's there then it is there in the dev system..
Any ways if you want to delete the other DTP from the PC in QA.. you can Delete it directly from the PC itself.. Goto change mode of the PC and then select the DTP which you want to delete-->then right click and hten Click on Remove Process -->then activate the PC..
Note: You might have authorization to edit the PC in QA then only you will be able to do the changes..

Linking two imacs?

I know this has probably already been discussed at one point or the other but I need some information.
I have an Intel iMac and a G5 iMac that both have Firewire ports. I do a lot of photography work and have many app open at once. I would like run Photoshop on one machine and Aperture on the other. All I need to do is be able to drag and drop from one computer to the other my image files. Is there any way to link two iMacs to do this. Obviously there is no way to control both computers with the same mouse and keyboard but I would like to at least be able to move files from one to the other with out having to do it over a network (router with ethernet). I just want to hook both computers together with one cable and drag and drop from one computer to the other. Any suggestions?

Target Disk Mode (TDM) effectively turns the Mac that is in TDM mode into an external hard drive for the other Mac. This will certainly allow you to drag & drop files & folders between the two Macs ... but only one of the Macs will be usable while the other basically becomes a hard drive connected to it.
It sounds like you want both Macs running as normal, but you want to share files/folders between them. And you don't want to do it via ethernet for some reason. Why? Networking would work fine.
You can directly connect the 2 Macs via an ethernet cable or via a FireWire cable and network them together that way, no router is needed. In both cases you would have to turn on File Sharing in the Mac whose files you want to share; and log on to it from the other Mac via Go > Connect to Server. (If you use FireWire, you also have to set FW as your preferred network in System Preferences > Networking; also on the Firewire pane, set Configure IPv4 = DHCP.)

Linking two accounts together

Are you able to link two accounts together. For example, I have had an account for a long time, but now my husband has one as well as my son. My son is currently signed in with my account but I would like to give him his own as well as share what I have with my husband.
Thanks,
Stephanee

Sorry, but it is not possible to merge iTunes Store accounts. You can, however, use content from multiple iTunes Store acounts on any given system or device. You just have to authorize the device to each account. You will have to use the account though which any item was purchased for redownloading, app updates, etc.
Regards.

Linking two computers together

Can I link two macs together so I have access to both but the other computer doesn't have access to mine?

If you own both and have admin accounts on them, yes. On the "other" computer, go to System Preferences, Sharing, and turn on File Sharing.
When the two computers are on the same network, you should see the other computer appear in your sidebar in Finder. Click it, authenticate with your admin details (from the other computer), and you now have access to its files.
Matt

ChaRM: Two Virtual Systems?

Hi Experts,
It is possible to have two virtual systems in a ChaRM three tier landscape? DEV -> Virtual System 1 -> Virtual System 2?
This is because only DEV is available now with QAS and PRD following in the future. Thanks!
Best Regards,
Karl

Dear Karl, Please use following documentation to configure CHaRM incase you have only one system present at this moment, Later you can alter the configuration once QAS and PRD are installed.
How To - Configure ChaRM on Single Managed System with multiple client for PoC(Part1)
How To - Configure ChaRM on Single Managed System with multiple client for PoC(Part2)
Hope it helps.
Regards, Amber S | CTS

Connect two BW systems to one source system

Hi Experts!
I would like to know if I can set up two BW systems connect to one source system. We copied and built new BW system (BW2) from existing BW system (BW1). We need to have both system connect to one source system. When I execut Restore from BW2 - RSA1 - Source System, I'm getting a following prompt:
"Connection cannot be used. The connection BB is used in the DEV400 source system as a connection BW1400 to BW. Do you want to delete this connection in source system".
If I select "Delete" then it replace exising connection between BW1 - DEV and creates new connection BW2 - DEV. If I go back to BW1 and do restore then same thing happens as BW2 connection removed.
Is there anyway we can set up two BW systems connection to one source system with restore? Connection works fine since each one can connection with no issues. Just when I do restore, it removes other connection.
Thanks.

Check if it helps:
Loading two different SAP BW system from one SAP R/3

Can One Business system have two technical systems assigned to it

Can One Business system have two technical systems assigned to it

hi,
the technical system describes the physical view and the business system the logical view, respectively.
So in most cases you must define both but while a technical system can only link to one WEB AS, more than one business systems can link to the same technical system.
But one Business System can have only one technical system.
Logical system for senders and receivers in XI can be defined as business systems which is associated with technical systems. You may req to create BS for identifying individual senders and recievers. Technical system is gateway having the technical details and it is in the ID we designate it to be either a sender or a receiver.
Follow the link below to learn moer on it:
http://help.sap.com/saphelp_nw04/helpdata/en/97/9d84494b9f45caabe0713296d89b72/content.htm
Regards
Mamta
Edited by: Mamta Yadav on Sep 12, 2008 11:13 AM

Linking two DEV systems

Similar Messages

Maybe you are looking for