Linking XDK with g++ on Solaris 2.8

I'm currently porting a project from LINUX to Solaris, and get undefined symbol errors when linking with the XML libraries using gcc. It looks like a name/mangling issue. Is this combination supported?

On Solaris, we use the Sparcworks V6 compiler. gcc is not supported.

Similar Messages

Link Error with Sample on Solaris

I am getting linking error when compiling the sample for XML C++ Parser, help anyone ?
make SAXSample
gcc -o SAXSample -I../include SAXSample.cpp -L../lib -lxml8 -lxmlc8 -lcore8 -lnls8 -lcore8 -lnls8 -lcore8 -lnsl -lsocket
Undefined first referenced
symbol in file
cout /var/tmp/cczSDNUP.o
XMLParser::xmlterm(void) /var/tmp/cczSDNUP.o
XMLParser::xmlinit(unsigned char *, void (*)(void *, unsigned char const *, unsigned int), void *, xmlsaxcb *, void *, unsigned char *)/var/tmp/cczSDNUP.o
ostream::operator<<(char const *) /var/tmp/cczSDNUP.o
ostream::operator<<(unsigned int) /var/tmp/cczSDNUP.o
XMLParser::xmlparse(unsigned char *, unsigned char *, unsigned int)/var/tmp/cczSDNUP.o
ostream::write(unsigned char const *, int)/var/tmp/cczSDNUP.o
ostream::flush(void) /var/tmp/cczSDNUP.o
ld: fatal: Symbol referencing errors. No output written to SAXSample
collect2: ld returned 1 exit status
*** Error code 1
make: Fatal error: Command failed for target `SAXSample'
null

I am getting this problem as well. I see it was also reported by 2 other people earler. Has anyone resolved this yet? I also have these unresolved external problems when using the C V1 XML parser. It is almost as if the libs downloaded are for a different version of Solaris and not recognized by the newly compiled objects. I have tried a number of things to resolve this without success.
Any help would be greatly appreciated.
Thanks
Julie Bartlett
null

Link problem with Solaris 9

hello,
i habe a problem in linking my application under the Solaris 9 os using the forte cc environment. Linking on an older machine under Solaris 8 is ok.
I get this error:
ld: fatal: file fz_df_db_anmelden.o: wrong ELF class: ELFCLASS64
ld: fatal: File processing errors. No output written to FZDFNO
There must be a conflict with 32 and 64 bit libraries. How can i link either in 32 or 64 bit. I need both, because the application shall also run on an 32 bit system.
best regards
Stefan

What about the bios settings ? The sony laptop that I have as an install guinea pig had a host of problems as long as plug and play was turned on in the bios then I turned off IrDa and the box seemed a bit quicker. Once I turned PnP off the USB ports started working as well as an external hp 3button mouse. Still no luck with the PCMCIA NIC's though...

Link error with Forte C++ Update 2 -compat=4

We've just upgraded to the Forte 6.0 update 2 C++ compiler on
Solaris 2.6. I'm getting the following link error when linking
against libraries built with the 4.2 C++ compiler.
Undefined first referenced
symbol in file
__rtaccess(MOperation&) /home/eng/sharonc/AdCORBA/CorbaRv-dev/export/s4_56_FORTE_Debug/lib/libcorbarv.so
__rtaccess(MHash&) /home/eng/sharonc/AdCORBA/CorbaRv-dev/export/s4_56_FORTE_Debug/lib/libcorbarv.so
__rtaccess(MPublisher&) /home/eng/sharonc/AdCORBA/CorbaRv-dev/export/s4_56_FORTE_Debug/lib/libcorbarv.so
__rtaccess(MApp&)
ld: fatal: Symbol referencing errors. No output written to ./tibcorbarvb
gmake[1]: *** [tibcorbarvb] Error 1
I've made sure the required patches for the Forte compiler are installed and the system was rebooted.
I use the following flags when linking:
CC -mt -g -xildoff -pto -KPIC -D_REENTRANT -compat
-features=rtti,namespace,bool,localfor,mutable -zmuldefs
I use -features as I also link with some libraries that use features
of C++ not available in the 4.2 compiler. However the link
errors are from the library that is built with the 4.2 compiler.
Everything compiled and linked fine with Forte 6.0 Update 1.
This is something new with the update 2 compiler.
Any help is appreciated.

Hi There,
I see that youare using the compiler flag -compat
with no value assigned.
This means it defaults 5.0C++ compiler comatibilty mode.
Since you mentioned in your email that you get the error message from the library built with 4.2 C++
compiler, try -compat=4 flag.
See the C++ migration guide for more information
from http://docs.sun.com
....jagruti
Developers Technical Support
Sun Microsystems Inc.
http://www.sun.com/developers/support

Problem with IPSec on solaris 9

Hi all
I'm facing a problem with IPSec on solaris 9 that I didn't have with Solaris 8 (With the Security package installed).
I've an application that creates SA's by using the pf-key interface.
What it does is first doing a GETSPI to a specific SPI and a specific Destination IP Address.
This will create an SA and put it in a LARVAL state. After about a minute my application will do an UPDATE to this SPI and that command should change the state of the SA from LARVAL to MATURE but instead I get an error saying that this SPI & IP address already exist (errno = 17).
Well of course it's already exist that's the all point it should just change the state of an existing SA.
This exact scenarion was is working fine on Solaris 8.
Am I doing somthing wrong (maybe there is a package on the solaris 9 that I need to install ?)
or is this a bug in solaris 9.
If anyone has any idea on how to do that (without using a one step ADD for a new SA) I will be very thankfull.

Sorry for using reply for querying.
I got a problem in creating a Security Association using the PF_KEY Socket (first used SADB_GETSPI and got SPI,with SPI tried to update SADB_UPDATE).
Getting this problem on Sun Solaris 8.
It returns errno 122 . operation not supported.
Here is my mailId [email protected]
I got few more queries regarding PF_KEY socket.
Not much directions are available also for pf_key socket in internet.
Monitor produces the following error.
# ipseckey monitor
"Base message (version 2) type UPDATE, SA type AH.
Error Operation not supported on transport endpoint from PF_KEY.
Message length 16 bytes, seq=4294967294, pid=450."
Here is my mailId [email protected]
Thanks in Advance.
ssundar.

HT5624 my iphone is connected to a old account that i have used in a while i have a new icloud i tried reseting my phone but now i can get in becuase it linked in with my old account how can i fix this so i can log in with my new account?

my iphone is connected to a old account that i have used in a while i have a new icloud i tried reseting my phone but now i can get in becuase it linked in with my old account how can i fix this so i can log in with my new account i reset my phone but i did it before on my new phone but this old is link to a account that i set up when i was so much younger can you advise what to do?
Thanks

Go into Settings App and turn OFF Find My iPhone. It will ask for your old password, but in the future you can use your new Apple ID account. If you need to reset the old password try this: https://iforgot.apple.com/password/verify/appleid?language=US-EN&returnURL=https ://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext

How to link asset with purchase order and PO Item.

Hello,
I have to generate a report which contains columns
Asset No , po no(ebeln) ,PO Item(ebelp),Material no etc
My query is how to link asset with purchase order and PO Item.
I am selecting asset and po no. from anla but how to get
po item no(ebelp)?
po line item is important in this report because every line item has differrent asset and material no.
i tried to match asset no in mseg table but i am not getting asset no in mseg .
how should i proceed ?

Thanks Thomas & Srimanta for the quick response.
When I checked EKKN table by entering PO there is no asset no. in anln1 field.
Also I would like to add that, In me23n for a PO, account assignment category we are entering 'F' for internal order settlement.
Where can i find the link between asset and po no(ebeln) and po item(ebelp)?
Regards,
Rachel
Edited by: Rachel on Aug 11, 2008 7:23 AM

Link SAP with Excel

Hello SAP Gurus-
Every month we have to download various reports from SAP (ME2J, FS10N, FD10N, FK10N and others) and export it to excel. Than in excel, we have to mannually format the same.
Is there a way we can link SAP with excel? Like if anyone in my company posts against particular vendor, it will automatically update the excel file that will have report from FK10N (Vendor Balance Display)
One of my friend at Bloomberg said that their SAP is linked to excel where excel is updated automatic. But I could not get any further details on how it works.
Please let me know if there is a way we can implement this system in our company.
Thank You in advance.
Jai

Hi,
You have to direct download it in to the Excel sheet without export to excel file.
E.g:- If you need to download the balance or any data fron the spreatsdeet amd yu download the file and give the file name as .xls it will download in the excel format.
May hope this is helpgul
Regards,
Kanike

Help!Apache compiling with gcc in Solaris 10

Greetings
I am having problems with Apache 1.3.
When I am running the script ./src/Configure my output is:
#./Configure
Using config file: Configuration
Creating Makefile
+ configured for Solaris 2100 platform
+ setting C pre-processor to gcc -E
+ using "tr [a-z] [A-Z]" to uppercase
+ checking for system header files
+ adding selected modules
./helpers/TestCompile: make: not found
+ using builtin Expat
./Configure: make: not found
+ checking sizeof various data types
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
+ doing sanity check on compiler and options
./helpers/TestCompile: make: not found
** A test compilation with your Makefile configuration
** failed. The below error output from the compilation
** test will give you an idea what is failing. Note that
** Apache requires an ANSI C Compiler, such as gcc.
======== Error Output for sanity check ========
./helpers/TestCompile: make: not found
============= End of Error Report =============
Aborting!
I am root, my PATH is
/usr/bin:/usr/ucb:/etc:/usr/local/bin:/opt/netscape:/usr/css/bin/:/bin:/usr/openwin/bin:/usr/sbin:/
I am missing something stupid, I know but I can't find it!!!!Help please I am a newbie.
I am curious. Has anyone been able to compile succesfully apache server with gcc in Solaris 10?
Thanks,

Thanks,
It was only that.!!!
But now I have the following problem, I can't create executables when I type make. The output is:
when I am in the src/folder
#make
===> regex
<=== regex
===> os/unix
gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED os.c
In file included from /usr/include/sys/wait.h:24,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/sys/procset.h:24,
from /usr/include/sys/wait.h:25,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1096,
from os.c:21:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
*** Error code 1
make: Fatal error: Command failed for target `os.o'
Current working directory /web-download/apache_1.3.33/src/os/unix
*** Error code 1
The following command caused the error:
for i in regex os/unix ap main lib modules; do \
echo "===> $i"; \
case ".Solaris 2100" in \
.OS390 | .TPF) ( cd $i && make SDP='' OPTIM='') || exit 1;; \
*) ( cd $i && make SDP='' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED ' RANLIB='ranlib' OPTIM='') || exit 1;; \
esac; \
echo "<=== $i"; \
done
make: Fatal error: Command failed for target `subdirs'
but when I am typing one step up is.
===> src
===> src/regex
<=== src/regex
===> src/os/unix
gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED os.c
In file included from /usr/include/sys/wait.h:24,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/sys/procset.h:24,
from /usr/include/sys/wait.h:25,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1096,
from os.c:21:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
*** Error code 1
make: Fatal error: Command failed for target `os.o'
Current working directory /web-download/apache_1.3.33/src/os/unix
*** Error code 1
The following command caused the error:
for i in regex os/unix ap main lib modules; do \
echo "===> src/$i"; \
case ".Solaris 2100" in \
.OS390 | .TPF) ( cd $i && make SDP='src/' OPTIM='') || exit 1;; \
*) ( cd $i && make SDP='src/' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED ' RANLIB='ranlib' OPTIM='') || exit 1;; \
esac; \
echo "<=== src/$i"; \
done
make: Fatal error: Command failed for target `subdirs'
Current working directory /web-download/apache_1.3.33/src
*** Error code 1
The following command caused the error:
case "xi86pc-sun-solaris2.2100" in \
x*390*) C89STEPS="0xffffffff"; export C89STEPS;; \
esac; \
cd ./src; make SDP=src/ all
make: Fatal error: Command failed for target `build-std'
Current working directory /web-download/apache_1.3.33
*** Error code 1
The following command caused the error:
make -f ./Makefile root= build-std
make: Fatal error: Command failed for target `build'
I am newbie with Solaris and gcc so I have no so much idea what is missing there.
Thanks,
Juan

Sorting singly linked list with minimum time complexity

Hi ...
anyone could tell me how can i sort singly linked list with minimum time complexity .... ????
Regards...

By MergeSort or QuickSort O(n log n). But then you
have to first extract the objects in the list,sort
them, then rebuild the list. But it will still bealot
faster than by keeping the list linked.Technically, I believe insertion sort is marginally
faster for small n ( <20 or so).Woohoo! So for 20 out of the possible 2147483648 array
sizes Insetion is faster!
Unfortunately, checking for that case probably wastes
all the time you get from using the faster sort...
That would depend on the actual distribution off array sizes. So it's an engineering decision.
Sylvia.

Linked Reports with Web Intelligence Rich Client

Hi,
Is it possible to build a linked report with WebI Rich client without using InfoView?
Assume the following simple report which select some fields of a file transfer information.
TransferID      Filename   Transfer Status
1                        a                       OK
2                        b                       OK
3                        a                       NOK
Now I want to click on the record with TransferID 3 and get some more information for that particular record such as:
TransferID      Filename   Transfer Status Date Duration
3                        a                       NOK         Feb 24      5
In other words, I'd like to do select of that table with the where condition "TransferID = 3" which corresponds to the record I clicked in my initial report.
Thanks a lot,
Kurt

Hi Kurt
Have you found any solution for "to link two tables in one WebI report without InfoView".
I will appreciate if you can share the same.
Regards
Naveed

Re: Fwd: Link Problems With Borland C++ 4.52

I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystal problem.
Many Windows based applications rely on PASCAL calling conventions, which
change the way parameters are handled in function/method calls. They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms for changing
the calling conventions of the prototypes in the generated C++ wrapper
library, so when you compile that code, the linker fails. I think that the
compiler may generate different symbols depending on calling conventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate the distribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI to the appropriate
places in the prototype definitions (see above) and use fcompile to build
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
>
We are trying to wrapper Crystal Reports from Forte. I know that there
are a number of other people in this same boat, as I've seen messages
posted here at various points during the past few weeks. We are having
a particular problem with getting the compile to go through, which we
have sent in to Forte Tech Support. I'm forwarding the message I sent
Tech Support to this group in the hopes that someone here may have
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / Alaiah Chandrashekar]
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to Crystal
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after a day
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message for each
of the functions we are trying to wrapper. We have tried a number of
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someone call
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092

James,
Thanks for your quick response. Yesterday we had been running down
the path of examining the calling conventions and trying to change them
to PASCAL, but without much success. After receiving your note, we
went back over it again, and this time we were able to finally to piece it
together. In addition to editing the Forte-generated .cc file to declare
the functions as PASCAL, we also had to turn off the compiler's case
sensitivity. (The Crystal .lib file had the function names in mixed case,
but the Borland compiler was generating all uppercase for the names.)
Now I had actually tried this yesterday and it didn't work (in fact it
generated a whole bunch of new errors) - because until we took a
second look at it today, I didn't realize that Borland's linker actually has
TWO flags that control case sensitivity. If you only turn one or the
other off, things can get pretty ugly looking. As soon as we turned
both of them off, the compile and link went beautifully. Again, thanks
for your help; hopefully we are over the worst of it now!
Dale
I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystalproblem.
>
Many Windows based applications rely on PASCAL callingconventions, which
change the way parameters are handled in function/method calls.They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms forchanging
the calling conventions of the prototypes in the generated C++wrapper
library, so when you compile that code, the linker fails. I think thatthe
compiler may generate different symbols depending on callingconventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate thedistribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI tothe appropriate
places in the prototype definitions (see above) and use fcompile tobuild
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
We are trying to wrapper Crystal Reports from Forte. I know that
there
are a number of other people in this same boat, as I've seenmessages
posted here at various points during the past few weeks. We arehaving
a particular problem with getting the compile to go through, whichwe
have sent in to Forte Tech Support. I'm forwarding the message Isent
Tech Support to this group in the hopes that someone here mayhave
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc.
[email protected]
>
>>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / AlaiahChandrashekar
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to
Crystal
>>
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after aday
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message foreach
of the functions we are trying to wrapper. We have tried a numberof
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someonecall
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092-----------------------------------------------------------------------------------
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
[email protected]------------------

How to I get Adobe Reader XI to accept links made with Adobe Acrobat XI without asking each time?

How to I get Adobe Reader XI to accept links made with Adobe Acrobat XI without asking each time?

Asking for what, exactly?

Link contract with another PO line item condition

Hi
Need some solution for the following issue:
Explanation of the issue: First the contract is created for the freight and insurance for vendor say V1. Then the PO is created for the material for vendor V2. In the PO line item the freight and insurance is specified in different condition types. When specifying the cost for the freight and insurance they want to link it with the contract that was created with vendor V1. Is it possible to link the contract for freight and insurance with the PO line item cost?
Regards

Need solution

[svn:bz-trunk] 18926: bug fix BLZ-570 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError

Revision: 18926
Revision: 18926
Author:   [email protected]
Date:     2010-12-01 14:07:19 -0800 (Wed, 01 Dec 2010)
Log Message:
bug fix BLZ-570 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError
We put hard limit to the max object nest level to prevent StackOverFlowError. the default max object nest level is 1024 and it can be configured in the endpoint/serialziation section in service-config.xml.
This needs documentation.
Checkintests pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-570
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/io/SerializationContext.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf0Input.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Input.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/AmfIO.java

Linking XDK with g++ on Solaris 2.8

Similar Messages

Maybe you are looking for