Links/Documentation Content Conversion for SenderJMS/MQ adapter?

I spent hours to find SAP documentation for this, but I could not find. I look for the counterpart of StrictXml2PlainBean to transform plain text into xml, if it comes in via a sender JMS/MQ adapter.
Please provide me some links. Thanks you.

Use MessageTransformBean
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Regards,
Prateek

Similar Messages

Query on Content conversion for Receiver SFTP Adapter

Hi Experts,
We have the receiver structre as follows:
<DT_Receiever>
<Header>
<field1>abc<\field1>
<field2>1234<\field2>
<\Header>
<Detail>
<field3>nhj<\field3>
<field4>bshsrt<\field4>
<\Detail>
<\DT_Receiever>
We should do content conversion for the above structure using SFTP adapter at the receiver end.
Kindly provide us some tips in achieving the same.
Thanks
Suganya.

Hi Suganya,
You can use message tranform bean for ur case.
U have to use "StructXML2Plain"
Please follow below link for ur reference If you face any problem please let me know....
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Thanks,
Enivass

Content Conversion for Sending Communication Channel using File Protocol

I have a file as follows:
CUSC,CRCA,OBAL,DATE
10197,0111,15250094.05,20071008
10758,0111,8131440.17,20071008
12939,0111,8212006.53,20071008
13129,0111,6953749.77,20071008
13331,0111,8607294.15,20071008
13579,0111,11972774.95,20071008
13676,0111,6636698.47,20071008
What is the content conversion that I can proceed with so that I can go with the mapping. I have to use File Adapter?
Please Help

Hi,
Check below links for Content conversion.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward points if Helpful

File Content Conversion in Sender File Adapter

Hi,
I am implementing a scenario, where I need to do Content conversion in My file Adapter.My input file is as follows
BGN00S-A200711281003ET4
REF38381012
DTP007D820071128
N1P5P5MicrosoftFI58-0612397
INSY18030XNAN
REFZZZZ666666666
DTP336D819970331
NM1ILIL1AdamsMarkE34666666666
PERIPIPHP770555-5555
N31470 Georgia Club Drive
N4StathamGA30666
DMGD819571022MM7
HD030HLTAE1D
My data type is as below.
<header>
     <BGN>
          <A></A>
          <B></B>
          <C></C>
          <D></D>
     </BGN>
     <REF>
          <A1></A1>
          <B1></B1>
          <C1></C1>
          <D1></D1>
     </REF>
     <DTP>
          <A2></A2>
          <B2></B2>
          <C2></C2>
          <D2></D2>
     </DTP>
</header>
<Content>
     <N1>
          <A></A>
          <B></B>
          <C></C>
          <D></D>
     </N1>
     <REFAR>
          <A1></A1>
          <B1></B1>
          <C1></C1>
          <D1></D1>
     </REFAR>
     <DMP>
          <A2></A2>
          <B2></B2>
          <C2></C2>
          <D2></D2>
     </DMP>
</Content>
My issue is, How do I set my parameter in Sender Comm channel for content conversion especially at record structure.
I have provided the value as Header,1,Content,*
But its not working.
If I do provide like
BGN_REC,,REF_REC,,DTP_REC,,N1_REC,,INS_REC,,NM1_REC,,PER_REC,,N3_REC,,N4_REC,,DMG_REC,,HD_REC,* then ,I am not getting above XML format. Please suggest or How can I modify my Data type which competes to configure in Channel
Thanks
Manmadha

Hi All,
I am sorry for the Jumbled Content. I dont know what happened.
I should get the XML output as below.
header>
     <BGN>
          <A></A>
          <B></B>
          <C></C>
          <D></D>
     </BGN>
     <REF>
          <A1></A1>
          <B1></B1>
          <C1></C1>
          <D1></D1>
     </REF>
     <DTP>
          <A2></A2>
          <B2></B2>
          <C2></C2>
          <D2></D2>
     </DTP>
</header>
<Content>
     <N1>
          <A></A>
          <B></B>
          <C></C>
          <D></D>
     </N1>
     <REFAR>
          <A1></A1>
          <B1></B1>
          <C1></C1>
          <D1></D1>
     </REFAR>
     <DMP>
          <A2></A2>
          <B2></B2>
          <C2></C2>
          <D2></D2>
     </DMP>
</Content>

File Content Conversion Parameters in FIle Adapter

Hi
I am doing a scenario - XML file to Text file using File content conversion parameters in Receiver File Adapter Channel.
I given FCC Parameters like:
DATA.addHeaderLine - '0'
DATA.fieldSeparator - ,
DATA.endSeparator - 'nl'
But im getting error in Receiver File Adapter as - fieldSeparator not specified.
i would be greatful if any one help me.
Regards
Rajesh

Hi Rajesh,
There are lot of blogs which explain File Content Conversion in different scenarios:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
I hope this helps.
Regards.
Praveen

Hierarchy on file content conversion for receiver?

Y'all,
I'm stuck in this problem and I haven't find a solution to solved it... so, all your clues and reply's are really appreciate...
The basic problem is a File content conversion for a receiver C.C. that is not working and it's raising some errors in the RWB, I have gone thru some blogs but I still having a lot of doubts...
I want to produce a flat TXT file that will have a line for every node or subnode, it doesn't matter if it's not represented as hierarchical structure like this one... but the records must be produced or written in the same order...
Man_Del_Header as main node with Man_Header, Delete_Detail and Trailer as subnodes...
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_DISTRIBUTOR_DELETE xmlns:ns1="http://xxx.com/xi/POSout">
   <Man_Del_Header>
      <MD_Header>|HM|1|</MD_Header>
      <MD_StoreNumber>051</MD_StoreNumber>
      <MD_filler1>|2|0000|3|</MD_filler1>
      <MD_EffDate>09/17/07</MD_EffDate>
      <MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
      <MD_BatchNumber>500</MD_BatchNumber>
      <MD_fiiller3>|8|</MD_fiiller3>
      <MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
      <MD_filler4>|10|D|</MD_filler4>
      <MD_linef>1</MD_linef>
      <Man_Header>
         <Man_Header>|HM|1|</Man_Header>
         <Man_StoreNumber>051</Man_StoreNumber>
         <Man_filler1>|2|0000|3|</Man_filler1>
         <Man_EffDate>09/17/07</Man_EffDate>
         <Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
         <Man_BatchNumber>500</Man_BatchNumber>
         <Man_filler3>|8|</Man_filler3>
         <Man_BatchDescription>Delete Distributor</Man_BatchDescription>
         <Man_filler4>|</Man_filler4>
         <Man_linef>Constant</Man_linef>
      </Man_Header>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005010</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005011</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Trailer>
         <Trailer>|T|1|</Trailer>
         <TotalRecCnt>00005</TotalRecCnt>
         <filler1>|2|</filler1>
         <NoOfHeaders>00002</NoOfHeaders>
         <filler2>|3|</filler2>
         <NoOfAdds>00000</NoOfAdds>
         <filler3>|4|</filler3>
         <NoOfChanges>00000</NoOfChanges>
         <filler4>|5|</filler4>
         <NoOfDeletes>00002</NoOfDeletes>
         <filler5>|13|</filler5>
         <NoOfSubstitution>00000</NoOfSubstitution>
         <filler6>|</filler6>
         <linef>1</linef>
      </Trailer>
   </Man_Del_Header>
   <Man_Del_Header>
      <MD_Header>|HM|1|</MD_Header>
      <MD_StoreNumber>061</MD_StoreNumber>
      <MD_filler1>|2|0000|3|</MD_filler1>
      <MD_EffDate>09/17/07</MD_EffDate>
      <MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
      <MD_BatchNumber>500</MD_BatchNumber>
      <MD_fiiller3>|8|</MD_fiiller3>
      <MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
      <MD_filler4>|10|D|</MD_filler4>
      <MD_linef>1</MD_linef>
      <Man_Header>
         <Man_Header>|HM|1|</Man_Header>
         <Man_StoreNumber>061</Man_StoreNumber>
         <Man_filler1>|2|0000|3|</Man_filler1>
         <Man_EffDate>09/17/07</Man_EffDate>
         <Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
         <Man_BatchNumber>500</Man_BatchNumber>
         <Man_filler3>|8|</Man_filler3>
         <Man_BatchDescription>Delete Distributor</Man_BatchDescription>
         <Man_filler4>|</Man_filler4>
         <Man_linef>Constant</Man_linef>
      </Man_Header>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005012</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005013</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005014</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Trailer>
         <Trailer>|T|1|</Trailer>
         <TotalRecCnt>00006</TotalRecCnt>
         <filler1>|2|</filler1>
         <NoOfHeaders>00002</NoOfHeaders>
         <filler2>|3|</filler2>
         <NoOfAdds>00000</NoOfAdds>
         <filler3>|4|</filler3>
         <NoOfChanges>00000</NoOfChanges>
         <filler4>|5|</filler4>
         <NoOfDeletes>00003</NoOfDeletes>
         <filler5>|13|</filler5>
         <NoOfSubstitution>00000</NoOfSubstitution>
         <filler6>|</filler6>
         <linef>1</linef>
      </Trailer>
   </Man_Del_Header>
</ns1:MT_DISTRIBUTOR_DELETE>
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005010|1
|D|901|170|0000005011|1
|T|1|00005|2|00002|3|00000|4|00000|5|00002|13|00000|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005012|1
|D|901|170|0000005013|1
|D|901|170|0000005014|1
|T|1|00006|2|00002|3|00000|4|00000|5|00003|13|00000|1
So as you can see, i wanna produce a flat file that will have line or record for each node, it doesn't matter that it has a hierarchy or a deeper level, it should be a simple flat file...
The thing is that i have been trying to setup the receiver comm. channel and it's raising some errors like Could not process due to error:
<i>java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'XXXX')', probably configuration error in file adapter (XML parser error)'</i>
I have checked this blog:
/people/karthiknarayan.kesavan2/blog/2007/08/22/file-content-conversion-for-multi-hierarchical-structure
Unfortunately i don't know if there's another way to achieve this...

Jerry,
it easy if you go with multi mapping concept and without BPM if you are above >XI3.0 SP14.and use Append mode in the receiver file adapter.
just create the target structure like root under that Man_Del_Header,Man_Header,Detail,Trailer at the same level but got be careful with occurences.
<b>Source:</b>
I think from your structure you have
Man_Del_Header (1-unb)
Man_Header   (1-1)
detail   (0-unb ) may be (1-unb)
trailer (1-1)
create <b>target DT</b> like:
ROOT
..Man_Del_Header (1-1)
..Man_Header   (1-1)
..detail   (0-unb ) may be (1-unb)
..trailer (1-1)
all are at same level under ROOT.
create MT,MI,MM,IM.
in MM just map correspoding fields and if you have any unbounded onces map the nodes too. and map Man_Del_Header in the source to MT_XYZ (important)
and in the MM go to MESSAGES tab and change the occurences of the target Message to 0-unbounded same way in the interface mapping 0-unbounded.
here it create anothe extra node in the mapping something like Message1,this is ok.
and in ID just create all other objects like as usual except creating Interface determination ,in that select the extended radio button.
in reciever File CC use FCC ,would be very simple in the recordsetstrcture give
your four nodes Man_Del_Header,Man_Header,Detail,Trailer.
and use either fixed or field seperator.use append mode in recv File CC otherwise it will generate files as many occurences your source "Man_Del_Header" has ,cos we are mapping it to the MT--xyz .
thats it you are ready to go...
if any error post back here again.
you can make use of this thread
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible (here there are two target DT ,but you just create one DT,remaining are similar)
good luck.
Babu

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Content Conversion in File Receiver Adapter

Hi,
I am doing a Content Conversion in File Receiver Adapter.
Input to the Adapter is:
<ns1:FileResponse_MT xmlns:ns1="http://www.bpmtest.com/bpm">
     <OrderID>123</OrderID>
     <Quantity>98</Quantity>
    <Price>76.23</Price>
</ns1:FileResponse_MT>
Desired output is: <b>OrderID# Quantity# Price (123#98#76.23)</b>
I tried to accomplish this with different settings in Recordset Structure and Conversion Parameters but could not achieve it, every time an empty file is produced.
Would appreciate any help on this.
Best Regards,

Hi,
Enclose your structure with a parent element like this.
<ns1:FileResponse_MT xmlns:ns1="http://www.bpmtest.com/bpm">
<parent>
<OrderID>123</OrderID>
<Quantity>98</Quantity>
<Price>76.23</Price>
</parent>
</ns1:FileResponse_MT>
Then give the parameters, it will work.
parent.fieldSeparator = '#'
parent.endSeparator = 'nl'
Regards,
P.Venkat

File Content Conversion for Unequal Number of Columns

Hi,
Iam following this thread FCC for Unequal Number of Columns.
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
when iam doing ,iam getting an error
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'TOTALSET.fieldFixedLengths' or 'TOTALSET.fieldSeparator' is missing Consistency check: no. of arguments in 'TOTALSET.fieldFixedLength' does not match 'TOTALSET.fieldNames' (0 <> 1)
My conversion parameters are
Recordset Structure                      : TOTALSET,*
TOTALSET.fieldNames                 : ITEMSET
ignoreRecordsetName                   : true
TOTALSET.fieldSeparator              : 'nl'
My file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
Please help in resoving the error.
Thanks in Advance
Srinivas

Hi Srivinas,
your file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
So it's easy, you have to use KEYFIELD option, coz you have something like that :
Line 1 : keyfield = 01 following by a limited number of columns (e.g 30 fields for Structure1)
Line 2 : keyfield = 02 following by a limited number of columns (e.g 14 fields for Structure2)
Line 3 : keyfield = 03 following by a limited number of columns (e.g 23 fields for Structure3)
Thanks to the Keyfield, you define a field which is present in each line that you can used to distinguished the different structures of lines. In your case, it seems that the keyfield is the first column (01, 02, 03).
Try to use that:
Recorset = TOTALSET         (and don't use option "ignoreRecordsetName : true")
Recordset structure =Structure1,1,Structure2,(star),Structure3,(start)       (the difficulty will be to find the good use of "*" and "1", but after some tests you will find the good one).
Note: replace (start) by the character " * "
Key field value = keyfield
Key field type = String (case sensitive)
Structure1.fieldNames = keyfield,field2, field3 etc.. of Structure1
Structure2.fieldNames = keyfield,field2, field3 etc.. of Structure2
Structure3.fieldNames = keyfield,field2, field3 etc.. of Structure3
and then you will have a XML like that:
TOTALSET
Structure1 and all its fieldN
Structure2 and all its fieldN
Structure2 and all its fieldN
Structure3 and all its fieldN
Structure3 and all its fieldN
TOTALSET
Structure1 and all its fieldN    because I used Structure1,1
Structure3 and all its fieldN
Regards.
Mickael
Edited by: Mickael Huchet on Apr 20, 2009 5:18 PM
Edited by: Mickael Huchet on Apr 20, 2009 5:19 PM

Content conversion for multilevel varying structure File to Idoc

Hi All,
I have following file structure.
VO
C1
S1 1 to unbounded
     H1 1 to unbounded
          D1 0 to unbounded
          D2 0 to unbounded
          U2 0 to unbounded
          UC 0 to unbounded
My Idoc structure.
ISU_EL34
     IDOC 0 to unbounded
          E1ISU34 1 to unbounded
               ZSEGMENT 0 to 1
I have applied the content conversion for the length specific file as follows.
Recordset structure: VO,1,C1,1,S1,1,H1,1,D1,,D2,,U2,,UC,
Do I need to do any changes over here to satisfy the above file structure.
V0 and C1 occurs only once in a file.
for S1 I should have H1 compulsory and others are optional, but i need to create Idoc when D1 data is available only.
I'm able to read the total file with the above content conversion.
MY requirements:
1) I need to create the Idoc based on the occurance of D1 node. I'm using H1 data also in the idoc not S1.
2) My doubt is whether the content conversion I have provide is applicable to the structure I have prepared.
3) When I'm trying useOneAsMany function for the above ie H1 data should repeat in Idoc as and when D1 repeats.I'm failing the error is both queues are not contain same number of data..
Could anyone suggest how I should approach for the above scenario.

Hi Sravya,
It is really helpfull answer , Thanks for sharing my problem .
It worked for this purpose, but I'm facing following problems
MY scenario
The file contains records V0,C1,S1,H1,D1,D2,U2 and Uc
In which Im using the data of H1,D1,D2,U2 and UC for creating target Idoc.
Every H1 contains at least 1 D1 record, If D1 exists D2 ,U2 and UC may or may not exist.If exists those are in a sequence and should consider the data of them to create Idoc.
Idoc should be created for every D1.
Problem facing:
Do we have any mechanism to group the D1 records to the relevant header.since Im unable do this with content conversion.
I think bcz of above problem; some records (D2 & U2 & UC) data is populating in Idoc even there is no D2,U2 and Ucs.
Thanks,
venu.

How to use content conversion for Complex structure

Hi All,
I want to know how to use content conversion for the following complex structure:
Data
...Details            1 to Unbound
.....Header           1 to 1
.......HF1
.......HF2
.......HF3
.......ITEM           1 to unbound
.........ITF1
.........ITF2
all are of type string.
Thanks & Regards,
Viswanath
Message was edited by: Viswanath Mente

Hi,
In the content conversion,
give ur
1.document name as message type
2.give ur recordstructure as Details,,Header,1,ITEM,
3.mention ur keyfield.
conversion parameter
Header.fieldFixedLength - give the field lengths
Header.fieldNames=mention all the field name
Header.keyField=enter the value of keyfield
Header.endSeparator='nl'
repeat the same for Item
regards
jithesh

I need this file "How to Use the Content Conversion Module in JMS Adapter"

Can someone send me this file:
"How to Use the Content Conversion Module in JMS Adapter"
I am not able to find it.
Thanks
Antonello

pls refer guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-adapters/how%20to%20use%20the%20content%20conversion%20module%20with%20xi%203.0%20j2ee%20jms%20adapter.pdf
Regards,
Swetha.

File sender adapter: Content conversion for very deep nested structure

Hi all
I have a file which looks like this
HDOCKET    9800000660980000061911062009AA123456bbWM100012349800000619
DDOCKET_TEST001 4012YAG1
WZOA00000000010000000001
WZOA00000000020000000002
WZOB00000000030000000003
IAAXX000001
IAAXX000002
C0000000000000000000100000000000000000001000000000000000000020000000000000000000300000000000000000004
T2
and my structure is
Header - 1
Detail     - 0....Unbounded
        Bag     - 0.....Unbounded   (sub node of detail)
        Track - 0.....Unbounded    (sub node of detail)
        Customer - 0.....Unbounded    (sub node of detail)
Trailer    - 1
and in the file sender adapter i mentioned the following content conversion setting
HEADER,1,DETAIL,*,Bag,*,Track,*,Customer,*,TRAILER,*
But when i go and see in the monitoring i received the following conversion
<?xml version="1.0" encoding="utf-8" ?>
<ns:MT_REQ xmlns:ns="http://royalmail.com/dd_c">
<HEADER>
<ID>H</ID>
<INT>DD</INT>
<CAR>9899999660</CAR>
<CUS>9899999619</CUS>
<POST>11062009</POST>
<NUMBER>AA123456bbWM10001234</NUMBER>
<ACC>9899999619</ACC>
</HEADER>
<DETAIL>
<ID>D</ID>
<Bag>DOCKET_TEST001</Bag>
<S>4012</S>
<Code>YAG</Code>
<mat>1</mat>
<count/>
<Mixed />
</DETAIL>
<Bag>
<ID>W</ID>
<Zone>ZOA</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>ZOA</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>ZOA</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
</Bag>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Track>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Tracked>
<Customer>
<ID>C</ID>
<OrigCustomer>00000000000000000001</OrigCustomer>
<Field1>00000000000000000001</Field1>
<Field2>00000000000000000002</Field2>
<Field3>00000000000000000003</Field3>
<Field4>00000000000000000004</Field4>
</Customer>
<TRAILER>
<ID>T</ID>
<Count>2</Count>
</TRAILER>
</ns:MT_REQ>
whereas i wanted it like:
<?xml version="1.0" encoding="utf-8" ?>
<ns:MT_REQ xmlns:ns="http://royalmail.com/dd_c">
<HEADER>
<ID>H</ID>
<INT>DD</INT>
<CAR>9899999660</CAR>
<CUS>9899999619</CUS>
<POST>11062009</POST>
<NUMBER>AA123456bbWM10001234</NUMBER>
<ACC>9899999619</ACC>
</HEADER>
<DETAIL>
<ID>D</ID>
<Bag>DD_TEST001</Bag>
<S>4012</S>
<Code>egg</Code>
<mat>1</mat>
<count/>
<Mixed />
<Bag>
<ID>W</ID>
<Zone>zzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>zzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>zzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
</Bag>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Track>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Tracked>
<Customer>
<ID>C</ID>
<OrigCustomer>00000000000000000001</OrigCustomer>
<Field1>00000000000000000001</Field1>
<Field2>00000000000000000002</Field2>
<Field3>00000000000000000003</Field3>
<Field4>00000000000000000004</Field4>
</Customer>
</DETAIL>
<DETAIL>
<ID>D</ID>
<Bag>DD_TEST002</Bag>
<S>4012</S>
<Code>egg</Code>
<mat>1</mat>
<count/>
<Mixed />
<Bag>
<ID>W</ID>
<Zone>zzzzzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>ZOA</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>zzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
</Bag>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Track>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Tracked>
<Customer>
<ID>C</ID>
<OrigCustomer>00000000000000000001</OrigCustomer>
<Field1>00000000000000000001</Field1>
<Field2>00000000000000000002</Field2>
<Field3>00000000000000000003</Field3>
<Field4>00000000000000000004</Field4>
</Customer>
</DETAIL>
<TRAILER>
<ID>T</ID>
<Count>2</Count>
</TRAILER>
</ns:MT_REQ>
i.e. i need all Bag ,Track and Customer inside detail tag.
could anyone help me in this..i've already searched SDN and got some link as useful but none of them were totally related.
Regards
Naina

Naina
Pls. check my forum link, i had the single level hierarchy XML file which I converted into nested structure & then into flat file.
File Conversion in Rec File Adapter with subnodes
This can give you an idea how to go ahead. Let me know in case you need any more info about this.

Content Conversion for J2SE Adapter

Hi,
I have configured the J2SE Adapter properly,
Still content conversion is not taking place for my file and it is going unconverted to xi.
Following is the process.
I have the file as:
<b>0000665811     0111     500.00     20071217</b>
I Require the xml as
<b><ns0:Mt_Customer_Balance_Info xmlns:ns0="http://aoa.nestle.com/fi">
   <RECORDSET>
      <CUSC>0000665811</CUSC>
      <CRCA>0111</CRCA>
      <OBAL>500.00</OBAL>
      <DATE_REPORT>20071217</DATE_REPORT>
   </RECORDSET>
</ns0:Mt_Customer_Balance_Info></b>
I have configured as follows:
<b>mode=FILE2XMBWITHROWCONVERSION
xml.processFieldNames=fromConfiguration
xml.fieldSeparator='0x09'
xml.lastFieldsOptional=NO
xml.endSeparator=nl
xml.fieldNames=CUSC,CRCA,OBAL,DATE_REPORT
xml.structureTitle=RECORDSET
xml.documentName=FILE
xml.documentNamespace=http://aoa.nestle.com/fi</b>
Can you help me regarding this?

hi anupam,
u may refer this and see if u have done the configuration correctly.
http://help.sap.com/saphelp_nw04/helpdata/en/88/0f453cf1fcc85ee10000000a11402f/frameset.htm
regards,
latika.

File Content Conversion for Multi Hierarchical Structure for Sender Adapter

Hi Gurus,
My text file is coming as
Header,filed1,field2(Occurrence=1)
Content,field3,field4(Occurrence =1-Unbounded)
Detail,field4,field5(Occurrence = 1-unbounded)
Trailer,fieldN(Occurrence=1)
My requirement is to write a file content conversion, so that, in the resultant XML Structure the Detail will come under Content.
I have defined the Record Set Structure as
Header,1,Content,*,Detail,*,Trailer,1
But after FCC, the Detailed record is coming in the same level as the Content Record. But the business requires that, the Detailed Record should come under Content Record, so that they can correlate.
Could any one advise?
Regards,
SS
Edited by: Subhendu Sahu on Jun 17, 2011 4:43 PM

Hi,
Please use the below parameters -
○       NameA.keyFieldValue
Specify the value of the key field for the structure.
This entry is mandatory if the key field name is set. Otherwise, the entry is ignored.
NameA.keyFieldInStructure
■       If the key field of the substructure is to be added to the XML document, enter add. This is the default.
■       If the key field is to be ignored, enter ignore.
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/6713ec3f914ddee10000000a1553f7/frameset.htm
cheers,
Sunil

Links/Documentation Content Conversion for SenderJMS/MQ adapter?

Similar Messages

Maybe you are looking for