Links in emails unable to open when clicked

Hi,  I'm having a rather difficult time opening links in emails.  I have tried all but this route so far to get to the bottom of this issue.  I figure it must be a security issue and noticed it happening since all websites I visit are now
"https" and  since that began months ago slowly I'm unable to now open links within emails. I have tried to delete the "s" on some sites only for there to be more conflicts and most won't open for me.  This site is unavailable
to me >>  http://www.aweber.com/z/c/?8948cc11-7005-4322-952c-4177647842c2  It was to open link for accepting subscription to a newsletter.  Others are links to forums or other 3rd party sites that are recommended reading.  I'm not
that computer savvy so could use some help here.  Please and thank you for your time and consideration in this matter as I'm not the only one that is experiencing this issue.  I have friends on f/b with the same issues.

Hi,
This issue might be related to the cache stored or security settings you have configured for the browsers, while please understand that we don't support Chrome or firefox, and we're not familiar with its settings, you might need to contact
the browser's vender support.
I'd like to share the following link with you as convenience
https://www.veracode.com/blog/2013/03/browser-security-settings-for-chrome-firefox-and-internet-explorer
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Change email program that opens when clicking an email address in Safari?

    Can I set Safari to open Microsoft Entourage as my default email program? Currently Safari always opens Eudora when I click on an email address. I found a place in Firefox to set it, but I can't find a place to set it in Safari. Safari Help was useless as usual.

    Thanks. It didn't occur to me to open Mail, because I don't use it for my email. How many programs let you select their competitors? Usually they ask to be selected over their competitors. And the fact that I could set my preferred mail program within Firefox suggested that I should be able to do the same in Safari...

  • Links in email won't open

    I updated to Firefox 5.0 today. I was reading email in Thunderbird and clicked on a link. Nothing happened, the page did not open. I then tried to right click and select open link in browser. Again, no window opened.
    Please help, as properties allowing me to copy paste is not an option, and hunting down a page that I should be able to click and link to is very time intensive!!
    Thanks!

    thanks for replying!
    I actually did have firefox open when clicking the links when I wrote about the issue I was having. However, the issue seems to have corrected itself, so YAY! I can't remember now if I rebooted before I asked for help, but I suspect I did not, and that was the solution; the next time I turned on my computer, it worked correctly.

  • After the Firefox update this week (Sept 7?) links from emails won't open. I get an error message. So I've temporarily set IE as my default browser, and the links work.

    After the Firefox update this week (Sept 7?) links from emails won't open. I get an error message. So I've temporarily set IE as my default browser, and the links work.

    Hi everyone, I have Snow Leopard 10.6.8. I have been very very frustrated by this problem. [I could not create new windows, and anything that opens new windows, such as trying to see what Add-ons you have etc would not work]. I read about changing screen alignment to the top... I have one screen so the option does not exist. The above messages would not fix this problem. I searched hard and did find a solution in the end. I read stuff about removing Add-ons until the problem is fixed, but its simply not the case.
    First of all open Firefox. next go to options: Help --- 'Restart with Add-ons disabled'. Tick the box for add-ons, restart firefox. Next go to Tools --- Add-ons. Next (In the Add-ons Manager' click on 'Plugins' on the left hand side pane. Look for the small blue writing that says 'Check to see if your plugins are up to date'.
    Now notice it should say 'Missing Flash'. "For your safety, Firefox has disabled your outdated version of Flash. Please upgrade to the latest version". I followed this, reinstalled Flash and it now works as it always did, no problems. For people where the above fix didn't work, try this one out. Hope it helps people!
    :o)

  • Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

    I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

    Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
    Thank You!
    I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
    BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
    Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
    Incidentally, whats up with all of the Java Console Add Ons?
    I have:
    Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
    Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
    What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
    Also, .NET Framework 0.0.0 Should I uninstall it?

  • IMovie shows up in Mission Control, but doesn't open when clicked.

    Can't open iMovie. iMovie shows up in Mission Control, but doesn't open when clicked. It just disappears up in the top left corner of the screen. The controls on the top of the screen (like; iMovie, File, Edit, View, Text, Share, etc) are al there, and they seem to work, but the window just won't show up.
    It happened after installing Mountain Lion on my Macbook Pro.
    Any ideas?

    Disable screen saver. Restart.

  • Desktop icons wont open when clicked on

    Hi to all Happy New Year just installed Leopard on both of my computers- on Macbook -desktop icons open when clicked on but not on my Imac computer- tried restarting numerous time any suggestions. Any thoughts. Kevin

    I have a friend that has the same problem. Seems related to plugging in an external monitor. When she unplugs, her Desktop icons are unresponsive and can't be clicked on. In the Terminal I issue:
    killall Finder
    and that temporarily fixes the problem. Wondering if there is a permanent fix. Perhaps I'll delete the Finder .plist.

  • I've upgraded to FF4 uing windows 7 64-bit - won't open when click on shortcut, have tried to reinstall etc, prev ok with version 3+

    I've upgraded to FF4 uing windows 7 64-bit - won't open when click on shortcut, have tried to reinstall etc, prev ok with version 3+

    I found something that could be a workaround ... wel at least it's gotten me one step further (windows 7 now recognizes the scanner as the right device (symbol usb sync cradle), but step 8 keeps failing.
    source : http://www.pocketpcjunkies.com/Uwe/Forum.aspx/wince/5660/Windows-CE-5-or-6-with-Vista-and-Windows-Mobile-Device-Center
    1. Install WMDC 6.
    2. Plus the Windows CE based device.
    3. Close the "Found new hardware" wizard.
    4. Right-click on "Computer" and select "Manage"
    5. Open the Device Manager, then select the Windows CE based device.
    6. Right-click and select "Update driver..."
    7. In the wizard, select "pick from a list..."
    8. In the list, select "Microsoft USB Sync [Microsoft]".
    9. ... nothing else! It works!
    Anything else I could try now?The first time I tried step 8, the microsoft usb sync driver was in the list but I got an error while updating the driver. The second time, it didn't appear on the list anymore. I'm thinking this is more of a 64-bit driver problem.
    Thanks, Joachim

  • Adobe XI doesn't open when clicked

    Hello,
    I have a user who has problems opening Adobe XI. I have searched the forums for answers and tried a number of things. I was hoping someone had a clear explanation for this issue or any additional suggestions.
    Problem: Adobe doesn't open when clicked. The AcroRD32.exe shows in the task manager but the GUI never comes up. When reinstall the software the user is fine for about a month and then the issue comes back.
    Solutions attempted:
    Repair the installation
    Reinstalled the software
    Adjusted registry settings
    Solutions to try:
    Delete the user profile
    Change the Enable Protect Mode at startup settings
    End all task related to Adobe and try to open
    Thanks,

    Also here is a copy of the Windows log errors that keep coming up with the program doesn't open:
    [11/12/2014 1:14 PM]
    Log Name:      Application
    Log Name:      Application
    Source:        Application Error
    Date: 11/12/2014 10:59:54 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      3XT41M1.rocgroup.com
    Description:
    Faulting application name: Acrobat.exe, version: 11.0.9.29, time stamp: 0x5412b52e
    Faulting module name: Acrobat.dll, version: 11.0.9.29, time stamp: 0x5412b501
    Exception code: 0xc0000005
    Fault offset: 0x00cef2ee
    Faulting process id: 0x15e4
    Faulting application start time: 0x01cffeaad7378bd7
    Faulting application path: <C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe>
    Faulting module path: <C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.dll>
    Report Id: 1608dff9-6a9e-11e4-8f30-0026b9cf21cb
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-11-12T18:59:54.000000000Z" />
    <EventRecordID>100608</EventRecordID>
        <Channel>Application</Channel>
    <Computer>3XT41M1.rocgroup.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Acrobat.exe</Data>
        <Data>11.0.9.29</Data>
        <Data>5412b52e</Data>
        <Data>Acrobat.dll</Data>
        <Data>11.0.9.29</Data>
        <Data>5412b501</Data>
        <Data>c0000005</Data>
        <Data>00cef2ee</Data>
        <Data>15e4</Data>
        <Data>01cffeaad7378bd7</Data>
        <Data>C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe</Data>
        <Data>C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.dll</Data>
    <Data>1608dff9-6a9e-11e4-8f30-0026b9cf21cb</Data>
      </EventData>
    </Event>

  • Book icon not opening when clicked

    I have an odd problem here.
    In my Contents tab on the left side, I have eight Book icons
    that, when clicked, open to reveal the Help topics inside them-
    just like any normal RoboHelp project would work. However, the very
    last Book icon in the list does not open when clicked. I checked
    the original file and all of the help topics are under the Book
    like they should be. When I compile the file and do a View Primary
    Layout, this last Book icon opens correctly. The problem only
    occurs once the project is built into the software I'm doing the
    Help for. When I move the Book icon up in the list (so it's not the
    last one anymore) it works correctly. But then the Book icon that
    becomes the last icon doesn't open when clicked. So whichever Book
    icon is last in the list doesn't open when clicked. Anyone have any
    clue what would cause this? Thanks alot.

    Hi Scott45 and welcome to the RH community.
    Have you tried deleting the book and adding it again? Also
    you can open the project's .HHC file in Notepad (or something
    similar) and check that the relevant TOC entry is displayed
    correctly there.

  • IMessage won't open when clicking on icon.  Is there a fix?

    Messages icon won't open when clicking on the icon since downloading Maverick.  Is there a fix?

    Hi,
    Open the Font Book and check the AppleGothic Font is Active, not duplicated and Validates (File Menu).
    In the list of fonts it is a long way down.
    After that check Helvetica Neue and Lucida Grande.
    The first deals with the iMessages Login.
    The next is the Font used in the app to display the text.The last is the one that title the Group Bars in Buddy lists (even if you don't show then you need this)
    If they check out go to Applications/Utilities and open the Disk Utility and then Repair Permissions.
    This checks them against the database on the Mac which is updated when the apps and OS are updated.
    9:06 pm      Wednesday; March 25, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Links in email won't open. When I click on a link, it goes to open tabs in FF, but the new link doesn't open.

    When I get a link sent in an email, the link no longer opens when I click on it. When I click on the link, Firefox and the open internet tabs appear on my screen, but the new link does not open. I must manually copy the link, then paste it in the address bar to get it to open.

    I have the same problem with FF 3.6.13, and Mac OS 10.6.5.
    Clicking links in Mail opens FF, but does not open the URL. Safari has no problems when I reset it as my default browser. The problem seems to develop over time. At first, links open fine, but then all of a sudden they won't.
    My remedy has been to reinstall FF, but I've had to do it twice in the last couple of weeks, which is getting a bit annoying.
    I have not experienced the problem on either of my two older Macs (running 10.4, and 10.5).

  • SkillBuilders Modal Page not opening when click edit link in a Manual Tabul

    Hello,
    This thread is related to a recent thread I created (Column Link is not working on a Manual Tabular Form I am using Apex 4.1.1.00.27, Oracle DB 10.2.0.5.0.
    In summary, I have a collection that retrieves the information from the EMP table, a manual tabular form based on that collection, and a link in the DEPTNO field that branch to another page with a Form based on the DEPT table.
    What I want to accomplish is to call the DEPT Form as a modal page that opens from my EMP Page.
    What I did so far:
    1. DEPT Page uses the popup template and branch to itself.
    2. The Link Attribute of the Link Column (DEPTNO) is set to: onclick= *"return false;"*
    3. I created a DA using jQuery Selector: *td[headers="LINK"] a*. Action: SkillBuilders Modal Page plug-in. URL Location: Attribute of Triggering Element. Attribute Name: href. Event Scope: live (Dynamic in Apex 4.2).
    4. Changed the Application Security to Allow Embed in Frames.
    My problem is that when I click the DEPTNO column, is it not opening the Modal Page.
    I created an example on apex.oracle.com in case some of you want to look into it:
    Workspace: EDIAZJORGE
    Username: test
    Password: test123
    App Name: Sample App
    App Number: 12231
    I appreciate any help.
    Thank you,
    Erick

    You were using a wrong jQuery selector. There are no columns with headers "LINK". Evidently, you want the modal to open through clicking the icon in the "DEPTNO" column, so all that is required is to change the selector to
    td[headers="DEPTNO"] aYou can always easily test your selectors when you use a tool like Firebug. Simply run the selector in the console, and it'll show you all selected object. In your case, executing $('td[headers="LINK"] a') showed nothing. Dropping "a" still gave nothing. At that point i was pretty sure there were no columns with such a header...

  • Key to force "in tab" open when clicking a link?

    is there a key i can hold down when I click a link to force it to open "in tab" (instead of popping out into a new window)

    HI,
    Try holding down the Control key and click the link.
    Carolyn

  • QT not open when clicking on .mov link

    I have searched and searched for an answer to this and can't find it.
    Scenario: When I click on a .wmv link, Windows Media Player opens and plays the file. This is great!
    Problem: When I click on a .mov link, nothing happens except a new tab (IE7) opens up, then when the download finishes in status bar, it says "Done" and nothing appears on the page nor does QT open.
    I CAN goto File>Open URL and copy and paste, but this gets irritating!
    I want to click a .mov link and have QT automatically open.
    YES, I have file types of mov set to go with QT....
    Any help would be appreciated.

    Yes.
    We do make better stuff and encode it in QuickTime containers for easy viewing.
    How hard to copy/paste a URL?
    If the browser is set to open the QuickTime file format via its plug-in a click on the link will do what it's told and the file will open in a browser window.
    Your Mac users at these forums could learn a trick or two by using QuickTime Media Link files.
    They are also text based links but they hold some special "magic" only QuickTime could deliver:
    http://homepage.mac.com/kkirkster/.Public/RedneckTexasChristmas.qtl

Maybe you are looking for