Links in iframe won't work

I have iFrames in a number of my pages that have been working fine but now all of a sunnden none of the links or scrollong will work in Safari or Firefox.
Any suggestions
http://condosofclearlake.com/condos-for-lease-over_1000.html

Hello,
As I can see from the code of the page, you seems to have a invisible rectangle (one with blue border and rounded corners) on top of the iframe HTML item.
You need to select the rectangle and then Right click>Arrange>Send to back to place it behind the html.
Hope this helps.
Regards,
Sachin

Similar Messages

Renamed Home page to "index," now my other pages' links to home won't work

I made a website on Iweb, bought a domain name from Hosting4less, and got an ftp client (cyberduck) to upload it. The Hosting4less support guy told me to rename my "home" page to "index" so that everything would actually show up once I'd uploaded it. This worked, and now, starting from home, I can go to any page. However, from the other pages, when I click back to the home link, I get this:
The requested URL /Home.html was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
I guess the renaming mixed up the other pages' links to the home page. How do I fix this? I don't know code, so I can't really go in and fix it that way. It seems like Iweb won't allow it either... help???

Hi and welcome,
with iWeb you don't need to rename any page to "index" as publishing already creates a page called "index".
I guess you're publishing to a folder, the result of publishing is an index.html file and a folder named with the name you gave to the site in iWeb. You have to upload the folder and the index.html file.
Pages should never be renamed after you publish as that breaks the whole structure of the website (all the links that refer to this page).
Republish from iWeb and reupload (also don't name a page index in iWeb as that may conflict with iWeb already generating such files).
Regards,
Cédric

Links in Google won't work properly.

For example, if I type "green bay packers" in the Google window, then search, a link might appear that reads"Official Site of the Green Bay Packers" with a URL "www.greenbaypackers.com" at the bottom of the link. However, when I click the link, it'll open "Flurry", Infomation", or some other site I don't use, nor intend to use. (However, I can copy the URL & enter it into the URL box at the toppa the page & it'll work properly. My bookmarx are not bothered by this prob.)
I use Google as my home page.(Not Chrome.) The prob also exists in Safe mode.

Hello,
As I can see from the code of the page, you seems to have a invisible rectangle (one with blue border and rounded corners) on top of the iframe HTML item.
You need to select the rectangle and then Right click>Arrange>Send to back to place it behind the html.
Hope this helps.
Regards,
Sachin

After safari 7.1.3 upgrade some features and links in websites won't work

I upgraded to safari 7.1.3 for mavericks. I have a macbook pro 13". Everything worked fine before, but after the upgrade some features and links in different websites just wont work. what can I do? Also different pop ups like mackeeper keep coming up, and that didn't happen before.

There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
          com.something.daemon.plist
and
           com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
          com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
           something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
            v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

"Link to" slides won't work with external monitor

I built a presentation with a lot of "link to" commands in it. It works perfectly when I run it on the desktop (MBP retina), but when I plug in a second monitor none of the link to's will work. Why would that be and how can I fix it?

I tried a different adapter and this solved the problem.

Hot Key of Link to action won't work

Hi,
tried to create a link to action witha hotkey, but unfortunately the action is not triggered. Action is triggered when I click the link
using 7.1.1
is there something else i need to activate? Tried it with IE7 and FF
Stefan

Hi,
tried to create a link to action witha hotkey, but unfortunately the action is not triggered. Action is triggered when I click the link
using 7.1.1
is there something else i need to activate? Tried it with IE7 and FF
Stefan

URL Hyperlink that wraps from line to line won't work in PDF

What's going on with the hyperlink feature that I can't make my links work in the PDF (or in InDesign). I searched for this topic on here and found a couple things that I tried, but with no success.
I am using a PC, InDesign CS2 and Acrobat 8.
A couple of my hyperlinks have lengthy addresses that wrap to the next line. Even when I change the Name to a shortened name and try to link them they won't work. All the addresses are correct and work on their own.
Do you have to use http:\\ or the www.? That would resolve one of my links, but the others all have the www included in the title, but still don't work.
Thanks!

It sounds as if you are not actually making your hyperlinks in InDesign, but relying on Acrobat to interpret them. This
is a shortcoming in Acrobat that it will interpret a www.~~~ type format as a hyperlink, but stops at the end of the line.
Your best option to guarantee hyperlinks working in the PDF is to form them properly in InDesign using the Hyperlinks panel.
k

Firefox froze up. So I removed from computer and reloaded. If I close Firefox, can't restart by clicking on the icon. Have to end process in Task Manager. It then starts. Some links on some web pages won't work.

Hi,
As I say in the question I don't know what happened but Firefox just stopped operating and then became erratic. So I removed the firefox programme from my computer and reloaded Firefox.
It now runs normally but I can't run Firefox on two tabs, only one, and if I close it down during a session I can't reopen it using the desk top icon. I go to task manager, processes, and end process for Firefox - then I can start it using the icon on the desktop.
I have also noticed that some links on a web page won't work - javascript is involved.
Thanks for your herlp,
Mike FD

It sounds like you are getting in a hurry.
If you force Firefox to close in a hurry, then it won't normally start until you re-start the computer. There are ways around this, but I'm not going to go into them right now.
None-force way to close Firefox down: Close the program and wait. Do something else. Firefox appears as if it is closed, but it's not. Firefox cleans out cookies and it's cache after you close it. That takes a few minutes. You can't restart it while it's doing house cleaning.
After it is done, then you can restart Firefox normally. You can watch it in the Task Manager.
The same applies if you are installing javascript. You have to wait a few minutes.
As for running it with multiple tabs, I usually have 5 or 6, or more, tabs open at a time. Have no idea what the problem is there. Firefox needs special permission by use of a pop-up option to close with multiple tabs open.

My safari won't work unless I click a link?

Recently I used AdwareMedic to clean off adware that had made its way on my computer. Once it was cleaned, I restarted my computer to be safe. Since the restart, every time I open my Safari a page comes up that states, "Safari Can't Open the Page." It goes on to state that the server unexpectedly dropped the connection, and to wait a few minutes then try again. However, time isn't helping my problem. I've restarted it again, I've updated my software, and I can't find any other discussions about this. (Forgive me if I've just missed it.) Then, I tried to click a link that was texted to me through the Messages app, and Safari worked (mostly). Some websites still wouldn't work, but I could get on most everything else. Does anyone know how to fix this problem? I'd like to use Safari without clicking a link that was sent to me through a text. Thank you very much.
(-Safari 8.0.2; -4 GB memory; 261.98 GB free of 319.21 GB; -2.66 GHz)

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Touchgraph link browser right click won't work; jre 1.4.2_03 linux

touchgraph link browser right click won't work; jre 1.4.2
Wanted to mention that the touchgraph link browser(java client) client starts correctly in Redhat 9, but i found one problem when trying to edit links. The problem being that I can't open the small popup menu when i right click in linux RedHat 9. left clicking while dragging on a selected link (in edit mode) lets you create a new link both in microsoft windows 95a and in Redhat 9. When i right click in win95a, a small menu appears that allows me to edit a link, but this menu doesn't appear after right clicking a link in edit mode in redhat 9 (which does work with TG link browser in win95).
I tried using a 2 button mouse with 3 button emulation. I also tried to use a 3 button logitech trackball which works with the old logitech c7 setting in Redhat. I also tried to operate the mouse with it's three buttons using the number keypad in linux, which works in other applications under linux. The same problem still happens in trying all of these methods.
I was told that unix and windows use different "select," "extend," and "menu" buttons(in relation to the mouse).
Maybe, microsoft windows is using a different method of interpreting the right mouse button than redhat linux 9. if so, maybe there is a way to do this in linux (really, i have no idea how this could be done, but am open to try).
If there is a solution, i would appreciate knowing how to go about doing it. .
note: I am using Sun's java 1.4.2_04 in windows 95a and I am using Sun's java 1.4.2_03 in Redhat 9. Both are the most current, i just downloaded them recently.
note: touchgraph link browser is an open source java client and applet under the GNU general Public License. I think that the source code was included with the binary. I am using touchgraph link browser v 1.20 . I downloaded from sourceforge.net
in google i found the following:
https://lists.xcf.berkeley.edu/lists/advanced-java/1999-September/000532.html
note: mara, you helped me before when i was practically installing redhat 9 and i had a problem with the installation and you mentioned that it was a faulty cd-rom drive. with your help, i am enjoying in learning about linux for the past 5 months since your answer helped me install redhat 9 successfully. Thank you very much since my very first question to you.
Answer Hello,
I downloaded the program and, if I think of the right situation, the right-click doesn't bring a menu for me. The thing I noticed is that when I drag a new link and (with left mouse button pressed) press right button it has an effect of 'canceling' the link. That's why I think that right mouse button works correctly. The problem is why the menu does not appear.
I can see two reasons, both causing problems not easy to solve: bug in the program or incompatibility between Windows and Linux java versions. The second one should not happen.. but it doesn't mean it's impossible. A bug in the program should be easier to find, but not by me (with not very big Java experience it'd take me several days).
What I'd do in your place is to mail the program developers (or report a bug). It won't make things worse, but can fix things.
Sorry that I can't help more
Mara
notethe second half is a post i made to all experts.com

http://www.realvnc.com/pipermail/vnc-list/2001-February/020570.html
this Url has a comment on this problem in linux. just wanted to post this. it might help.

After the Firefox update this week (Sept 7?) links from emails won't open. I get an error message. So I've temporarily set IE as my default browser, and the links work.

After the Firefox update this week (Sept 7?) links from emails won't open. I get an error message. So I've temporarily set IE as my default browser, and the links work.

Hi everyone, I have Snow Leopard 10.6.8. I have been very very frustrated by this problem. [I could not create new windows, and anything that opens new windows, such as trying to see what Add-ons you have etc would not work]. I read about changing screen alignment to the top... I have one screen so the option does not exist. The above messages would not fix this problem. I searched hard and did find a solution in the end. I read stuff about removing Add-ons until the problem is fixed, but its simply not the case.
First of all open Firefox. next go to options: Help --- 'Restart with Add-ons disabled'. Tick the box for add-ons, restart firefox. Next go to Tools --- Add-ons. Next (In the Add-ons Manager' click on 'Plugins' on the left hand side pane. Look for the small blue writing that says 'Check to see if your plugins are up to date'.
Now notice it should say 'Missing Flash'. "For your safety, Firefox has disabled your outdated version of Flash. Please upgrade to the latest version". I followed this, reinstalled Flash and it now works as it always did, no problems. For people where the above fix didn't work, try this one out. Hope it helps people!
:o)

External links won't work once published

Hi, I'm self taught so don't always understand everything and I'm a complete novice with iWeb, used Front Page before getting a Mac.
I'm in the process of building a new website using iWeb and I'm having problems with getting links to external pages to work. They work fine in iWeb. 'Enable as a hyperlink' and 'make hyperlinks active' is ticked for all links. I've formatted the links to be coloured red, then orange when visited and blue with an underline on roll over, grey if disabled. All works fine in iWeb but then when I publish the links won't work. They will momentarily and then they won't. If I refresh the page then one or two will work but when you go back to the page they won't work again. I've deleted them all and redone them, still the same problem. Tried it in Safari and Firefox, same problem. Deleted the site from the server and republished, same problem. Anyone got any ideas?
On the page in question I have a widget to SkyScanner, thought that was maybe causing a conflict. Deleted it and republished, same problem.
Here's a link to the page I'm having problems with http://www.marbella-rentals.co.uk/MarbellaRentals/flights.html and it's the links to airlines on the right that I can't get to work.
Also I have another couple of questions. How do you resample images? I have used a background image on the pages and I've managed to get it to stay static by altering the code slightly but don't know how to resample it so that the page will load quickly. Ditto with all the rest of my images. Don't want to have to resize them all manually if possible. Also, with the background image I don't know what size I should make it if I was to do it manually.
Last question... How do you change the title of your page and add a favicon?
If anyone can help me would be much appreciated.
Thanks

You have an image covering some of the hyperlinks - GraphPaper_01_3.png
Do a Command A on the iWeb page to find it.
Your background image seems to load OK. Use an optimizer to to get it and the whole site to download faster...
http://www.iwebformusicians.com/Search-Engine-Optimization/Optimize.html
See this page for howw to add a favicon...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html
To add title tag and meta description you need to open each HTML file post publishing and add them with an editor app. More conveniently, you can use iWeb SEO Tool...
http://www.iwebformusicians.com/Search-Engine-Optimization/Tags.html
Here's a checklist for the publishing workflow if you are adding SEO tags and Optimizing...
http://www.iwebformusicians.com/Search-Engine-Optimization/Website-Publishing-Wo rkflow.html

RAID DRIVE WON'T WORK IN LINK MEDIA BROWSER

I have a RAID 5 drive connected to my MACPRO (MacPro5,1), OSX 10.9.2. Its working fine on OS. In Premiere Pro CC I can import files from it no problem, everything seems to be fine until I try to link media from it. The link media browser won't access it. I can see it, I can see the RAID drives icon, but it won't access the files.
In the link media browser it won't show on the Local Drives list on the left pane. When I double click on local drives, on the right pane I can see the RAID HD icon, but when I click on it it won't open it. It knows its there but can't access it. I don't get it. I can import files from it, etc, but not link files. I would have to redo the whole sequence with files from that RAID drive and its days of work.
I would appreciate enormously any help with this issue.

Adobe CC 2014 v8.1
iMac 27" 3.4GHz w/12GB Ram.
OS 10.9.5
OWC Mercutry ELite Pro Dual.
RAID 0
Thunderbolt.
No adapters or daisy chaining going on.
The RAID is new and only has about 700GB of data on it.
I read on Creative Cow that alexojedav522 was able to figure out that the size of the drive was his issue:
https://forums.creativecow.net/thread/3/954245
After reading that I tried repartitioning my RAID into two sections of 2tb each (let's call them Partition1 and Partition2).
So Partition1 is just the original partition (which was 4TB) shrunken down to 2TB.
Partition2 is the brand new partition.
Oddly enough, I can access Partition2 via Media Browser just fine.
And when I move media onto it I can relink it as well).
But Partition1 is still not accessible via Premiere at all.
I am currently moving everything off of Partition1 and onto Partition2, so that I can at least relink my project and get to work.
But obviously that isn't a permanent solution.

Firefox won't work unless I click a link twice, or it refuses to load a page

Ever since I upgraded to 3.6.13, Firefox will often not load a webpage unless I click the link a second time. The first time, I'll click it and...it might work, but most likely it won't work and I won't notice it hasn't worked until about minute has gone by and it's done nothing. I saw that I had clicked it, because the link is highlighted..it just refused to do anything. So I'll click it again, and then it'll go.
I've noticed this when I get a Page Not Found page. I go to click "Try Again", and I've seen that I clicked the button...but nothing happens, it doesn't even try to reload the page. I'll click it a second time, and then it'll go.
This is so frustrating!

I have the same problem on my website. It only happens in Firefox. IE, Chrome and Safari are working fine.
Very strange behaviour. Check this page: http://1stlook.nl/webdesign-eindhoven.html
You have to push the orange button twice. First time it only drops. Only if you click in the right corner it works???

I updated and it kept freezing up. i deleted it. put IE on and have no hyper links now, fire fox won't work at all either, this is on my work comp. please help me now

i upgraded on my work comp and it kept freezing up. i had to delete it from the comp. i can't us IE because the hyper link process is now missing for some reason, it was there before. i can't put firefox back on because it simply won't work. please help me because this is happening on my work comp.

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Links in iframe won't work

Similar Messages

Maybe you are looking for