Links in mails forwarded by an inbox rule get broken/removed

Hi,
after I upgraded from Exchange 2007 to Exchange 2013 I got a weired problem with auto forwared e-mails as this mails end up with broken (empty).
Only links with custom protocol headers are broken/removed, HTML links (http://, https://) are not removed.
Only internal mails forwarded by an inbound rule (created with outlook) have this problem, mails forwarded directly with Outlook or mails auto forwarded (inbox rule) to an external receipient are ok.
Original links in HTML Mail Source (partly) look like this
<a href="MIS:\\VGD12_1_KS\2014\0623\VGD12_1_Kreditsanierung_TM604_D20140623.xlsm?openmode=0">VGD12_1_Kreditsanierung_TM604_D20140623.xlsm<
and end up as
<a href="">VGD12_1_Kreditsanierung_TM604_D20140623.xlsm<
Any suggestion to solve or further analyse this problem is welcome.
Regards
Martin

Hi Martin,
From your description, I recommend you send the following message to an internal recipient directly and check if it will be corrupted.
<a href="MIS:\\VGD12_1_KS\2014\0623\VGD12_1_Kreditsanierung_TM604_D20140623.xlsm?openmode=0">VGD12_1_Kreditsanierung_TM604_D20140623.xlsm<
I look forward to your response.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Similar Messages

Link to discussion detail view or flat view gets broken If new subject view is created

Hi,
Whenever I try to create new subject view of discussion board with different name, the link to flat view for discussion detail is broken rather it opens the new subject view again. Does anyelse had this problem? and is
there any solution for this?
BR,
Alamzeb

Hi Alamzeb,
According to your description, my understanding is that when you click the subject in the new subject view, it opened the new subject view rather than going to the Flat view.
I could reproduce this issue. To fixing this issue, we need to modify the new subject view, and set it to show this view in the top-level folder. You can do as opening the view->Modify View->Folders, under ‘Show this view’, select ‘In the top-level
folder’, click OK.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Disable Inbox Rules for Disable Users

I have found that when our helpdesk disables an AD user account (terminated employee) that has an Outlook inbox rule to forward the email to an email address outside the organization, emails sent to the former employee are still forwarded to that outside
email address. I would like to run a script each day that queries AD for all disabled accounts, removes any forwarding SMTP adresses, then removes all mailbox inbox rules. I have been trying to use get-aduser against a DC and export the list of
disabled users, this works fine. I then take that csv, import it and use -foreach-object to set the forwarding smtp address to null. I would then like to use the same csv file to run the -removeinbox rule command against the list. I am having
a hard time time combining the commands I need into a PS script that works against both AD and Exchange.
Anyone have some powershell kung fu to assist me? Thank you!
~Eric

Hi Eric,
According to your description, I understand that you want a script to get a list of disabled AD user, then removes any forwarding SMTP addresses, then removes all mailbox inbox rules.
We can run following command to get a list of disabled AD user in PowerShell:
Get-ADUser -Filter 'Enabled -eq "false"' | select name,userprincipalname
More details about “How Can I Get a List of All the Disabled User Accounts in Active Directory? “, for your reference:
http://blogs.technet.com/b/heyscriptingguy/archive/2005/05/12/how-can-i-get-a-list-of-all-the-disabled-user-accounts-in-active-directory.aspx
Also, run below command to disable forwarding SMTP address and inbox rule:
Get-Mailbox -Identity xxxx | Set-Mailbox -DeliverToMailboxAndForward $false
Get-InboxRule –Mailbox xxxx | remove-InboxRule
However, we recommend use this disable AD user to disable mailbox.
By the way, this question will related to the script of Exchange server, please contact relevant team so that you can get more professional suggestions. For your convenience:
http://technet.microsoft.com/en-us/scriptcenter/dd742246.aspx
Best Regards,
Allen Wang

Mail Forward Rule Not Working

I have a few mail forwarding rules set which don't seem to be working. I see no forwarded emails in my send mailbox, and when I click the small arrow in the message window that indicates it has been forwarded, I get a message that says I must have deleted the message, which is not true. This is what the rule looks like:

Mail rules only work on incoming mail. Once the mail is listed in your Inbox, the only way to use a rule is to manually run it. Given how rules work this may render your rule as non-working.

How can I move an e-mail forwarded as an attachment into my inbox?

I recently migrated from MS Outlook 2003 to Thunderbird 24.4.0 for my personal e-mail because I can't afford the latest MS Outlook and wouldn't really want version 2013 anyway. Prior to the migration, any time someone sent me a personal e-mail at work, I would forward it home as an attachment and move that attachment into my inbox at home. In Thunderbird, I find that when I drag the e-mail attachment from the attachment section to the Inbox folder (the actual folder in the navigation pane or the list of e-mails in the inbox), I get the unavailable symbol (circle with slash through it). I am guessing this is not going to be something I can do in Thunderbird, but wanted to check here and see if anyone had other ways to get the same end result.
The reason I have done this historically is to preserve the original e-mail and have the mail client show me who sent it to me. Viewing the forwarded message is fine, but if I want to look for it later, I have to look for a forwarding e-mail from myself instead of the original message that was sent to me.
Beyond getting people to use my personal address (really not sure why/how they have my work one), does anyone have any advice that could make this happen? For the record, I also tried resending the e-mail to my personal address as if it were from the original sender, but that won't fly at work due to the security configuration in the Exchange server.

Save the attachment, and give it an eml extension if it doesn't have one (messages attached to TB messages are named 'Attached Message'), then drag the eml file from the Explorer folder where you saved it and drop it on a TB folder in the Folder Pane.

Mac Mail - Forward Symbol Appearing On All Messages In Inbox??

My mac mail app has started automatically adding the forwarded mail symbol (small right-pointing arrow) on all messages that I receive within my inbox. When I click on the forward symbol, I also get an error stating 'Error - Mail was unable to find your reply to the message “XXX”. You may have deleted the message.'. This is correct because even though the messages have the forward symbol...they have never actually been forwarded or replied to which explains why Mail can't locate the forwarded message. I have tried rebullding my inbox both through the 'Mailbox / Rebuild' menu command as well as by deleting the envelope index file within the Library/Mail/V2/MailData folder and still the problem persists.
I have 3 separate IMAP email accounts set-up within mail and this bug is happening on all messages received in my inbox. The forward arrow is also appearing on the messages when I view them in Mail on my iPhone or iPad but only after the arrow was added to the message within Mail on my Macbook Pro. In other words, when I receive messages in my inbox on my iPhone or iPad, the arrow does not get added so it'se defintely a bug with the Mail app on my Macbook Pro.
Any feedback/advice would be greatly appreciated as it's very annoying having all of my email messages marked with the forward symbol!!

Thanks for the update. I guess it would be great if both Apple and MS come up with a solution for this issue as it is very critical. Please keep me posted if hear from them.
I found some article in Apple support with the following details. I tried both the options and it doesn't work either. More info here http://docs.info.apple.com/article.html?path=Mail/2.0/en/ml1002.html
Reindex mailboxes. To do so, quit Mail and, in the Mail folder in your home Library folder, move the Envelope Index file and any folders that begin with "Mac-", "Exchange-", or "IMAP-" to a different location, such as your desktop. When you open Mail, it reindexes all messages in local mailboxes or POP folders and re-downloads all messages from the mail server. This process can take several minutes depending on how many messages are in your mailboxes.
For a POP account, reimport mailboxes. To do so, choose File > Import Mailboxes, and then choose "Mail for Mac OS X." In the Mail folder in your home Library folder, select the folder that begins with "POP-" (for example, [email protected]). If the problem persists, try again, this time choosing "Other" and then selecting the affected mailbox itself (for example, Library/Mail/POP- [email protected]/Inbox.mbox).
Message was edited by: Santhosh Paramesh

Gmail filters vs. Mail Inbox Rules: Who wins?

I have both Gmail filters and Apple Inbox Rules. If both Gmail and Apple Mail are running, whose filter runs first?

mdh98368 wrote:
If both Gmail and Apple Mail are running ...
I believe this part of your question is irrelevant. For "both Gmail and Apple Mail to be running", it sounds like you're talking about running two separate, independent, but possibly conflicting apps on your Mac. If that's what you're doing, you should shut one of them down.
The normal series of events would be that incoming email would hit your gmail account (out there on the web) and your gmail filters would be applied at that time. Then, the gmail server would send the incoming message to your Apple Mail, which would apply its rules at that time. This assumes you have your gmail account set up in the Apple Mail app.

This is regarding CBMA in SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the mails to Business workplace inbox in ECC.

This is regarding CBMA in single stack SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the alert mails to Business workplace inbox in ECC.
So I need to set up PI to redirect mails to ECC Business workplace user inbox (sbwp). From here rules are set up & routed per distribution list.
Please guide me how I can achieve this requirement.

Hi,
yes, it is a little bit different. This is the issue.....
But I am not sure if your links will help:
1) /people/william.li/blog/2008/02/13/sap-pi-71-mapping-enhancements-series-using-graphical-variable
is about a different solution. I do not need to count the number of lines of the source message.
And the second variable is about concat line by line from unbound node to unbound node.
My issue is:
Souce:
Message line (0...unbound) ! ! ! ! ! ! ! !
.    ResultLine   (1..1)
Mapping:
=>   ResultLine1
       ResultLine2
       ResultLine........          => into UDF to an element (1..1) in one mapping operation.
So that all "ResultLine"s are included.
The result is explained in the given link for Mail attachment with UDF.
So I am not sure how to use this thread for my issue.
In the comments of that blog Christoph Gerber writes that the new variable feature can only handle single values.
So it is not suitable for my purposes as I have a list of values here that needs to be moved into the target message field.
2) http://wiki.sdn.sap.com/wiki/display/Java/UsingEditJavaSectioninMessageMapping
shows where to find the button "Java section" which is not available here in 7.1
3) /people/sap.user72/blog/2005/10/01/xi-new-features-in-sp14
too is about the nice little button for Java Section that is no longer existing on PI 7.1 screen for mappings.
So my issue is: How to replace the Java section function with global variables in PI 7.1?
Best regards
Dirk

Forward from SAP Inbox to Outlook

Dear Experts,
User would like to forward automatically all his messages from SAP Inbox to the external mail address.
In Inbox->Settings->Office settings->Automatic Forwarding Tab the user define address to forward and assign Forward all documents .
The only messages that are forwards to the external mail address are in class "documents" ,
But class "workflow"are not forward to the external mail address .
Please advise where is the problem to forward also the class "workflow" to external mail address.
Thanks,
Moshe

Hello Moshe,
You will have to configure SMTP and SCOT for this sending of mails
Please refer to following link for the documentation on this:
http://mysapinkpot.blogspot.com/2007/11/configuration-sending-mails-from-sap.html
Let me know if you have any issues
Rohit

How can I send just 1 message for 2 mail accounts under mail forwarding

Hi everyone
I have a question for mail forwarding.
I have 2 inbound mail servers,4 outbound servers and many store servers.
User A set his mail forwarding address to B, and B set his mail forwarding address to A.
So 2 guys can receive each others message.
In this case, If two users have same "mailhost' value(ex, x.test.com), forwarding mail goes just once for each accounts.
If "mailhost' values , however, are different (ex, x.test.com and y.test.com - and also two mail servers connected as internal server),
forwarding mail goes 4 times for each accounts.
So sender gets 4 messages and receiver gets 5 messages.
How can I set mail server configuration to send just once not 4 times for 2 users?
Any advices would be welcomed.
Thanks
Message was edited by:
1231dugi
Message was edited by:
1231dugi

Hi,
User A set his mail forwarding address to B, and B
set his mail forwarding address to A.
So 2 guys can receive each others message.You have just created a mail loop. This is not a good thing.
Any advices would be welcomed.I would advise creating a mailing list which has both userA and userB as members, and then have emails sent to that address OR have a third account which they can both access (IMAP shared folders) and have email sent to that OR have them share each-others INBOX.
The fact that userA & B didn't get multiple copies when they were on the same mailhost is due to good luck only.
Shane.

New IMAP mail not appearing in inbox

I've been having trouble with new mail appearing in the inbox. Mail is set to check every minute, and the account is enabled. New mail will only appear in the inbox if I click on another mailbox and then re-select the inbox. It will also appear if i rebuild the mailbox, restart mail, or take mail offline and then online again. Manually checking mail doesn't cause new messages to appear. The account is an IMAP account, and I've since turned off all of the rules to no effect. Is anyone else having this type of problem? Any ideas how to get mail to update properly?
MacBookPro Mac OS X (10.4.8)

Do you happen to check your mail from different mail clients on different computers? For example, when I check mail from both my laptop and my desktop, I've noticed that one of them can stop getting new mail or even get confused about which message it's displaying. The subject might say one thing, but when I click on it, I get the body of a different message. I've found that the mail client can get confused about how many messages are in the mailbox if the other client deleted some messages.
That's when syncing the client with the server is necessary.
If I delete two messages from one client, then I don't see new mail in the other client until I get more than two messages, and even then I never see those first two unless I sync.

Grant mail forwarding privileges? - OWA 2013

In a locally hosted Exchange 2013 environment I would like to allow some users to be able to go through /owa and enable forward all mail to '[email protected]' I have it set up but nothing is happening. Is there a rule that needs to be enabled to allow
mail forwarding, I don't want to have to create external contacts for each external address they send to.
Let me know!
Thanks!

Hi
Auto Forwarding is by default not enabled in an Exchange environment.
It is a organizational setting that can be enabled on a "remote domain basis"
only and not for an individual user.
Set-RemoteDomain
http://technet.microsoft.com/en-us/library/aa997857(v=exchg.150).aspx
If you don't want to do that (=understandable) then your only option is to create MailContacts that your users can use in the rules they create.
Martina Miskovic

Mail forwarding in Lion

In Workgroup Manager on Snow Leopard Server when you edited a users account settings, there was a "Mail" tab which you could enable/disable the mailbox, or, have the email forwarded to an external mail account.
So where is the equivalent option to do this in Lion Server? I can find the option to enable mail services for the user in the Server.app, and I can add mailbox aliases (using secondary shortnames) to Workgroup Manager, but I can't find anywhere to allow mail forwarding to an external address.
Any ideas anyone?

This problem was crippling a large client after migrating from Microsoft Online Services (now Office 365) to Lion Server.
Not having this feature is simply unacceptable.
However, I have finalized a way to get group emails working. It involves adding the LDAP 'mail' attribute to each group that you would like to have members 'subscribed' to for group email (simply by being in that group) by doing the instructions below.
Open Directory Utility on your Lion Server. Authenticate as the LDAP Admin account (usually diradmin) and edit 'groups' in LDAPv3/127.0.0.1. You can add an object type called EMailAddress for any group in LDAP. Add the accounts to the group that you would like to receive email.
I preferred creating my own file called /etc/postfix/ldap-groups.cf, but you can use the provided /etc/postfix/ldap-aliases.cf if desired.
In it, I put the following information to make postfix find the email address for the group, and then expand memberUid to uid, then formatting the results in an acceptable email format.
/etc/postfix/ldap-groups.cf
server_host = localhost
search_base = cn=groups,dc=domain,dc=tld
version = 3
query_filter = (mail=%s)
result_attribute = memberUid
result_format = %[email protected]
Once that is configured, you can test it by the Terminal:
$ postmap -q (EMailAddress)@domain.tld ldap:/etc/postfix/ldap-groups.cf
It should return users' email addresses.
After that, add the following information into main.cf
virtual_alias_maps = ldap:/etc/postfix/ldap-groups.cf
Restart postfix
# sudo postfix reload
Send yourself a test email and enjoy the functionality of what should have been included in Lion Server in the first place.
I am currently looking for a way to query OpenLDAP in a similar way, but instead be able to get the group email address to forward to users in it and to addresses outside of only LDAP users: e.g. forward to uid1, uid2, name(at)gmail.com.
Also, being able to have some kind of rules for who can email the group ... would be nice. However, it seems that Apple has run out of nice.

Mail won't "open link behind mail" in Mavericks

Is anyone else having this problem? I get weekly digests from a number of groups as well as google alerts. My usual workflow is to read through the digest right-clicking on any links that I am interested in and selecting "open link behind mail". When I do this in Mavericks... nothing happens! Safari opens but it does not load the page. so that means that now I am stuck swiping backwards and forwards between Safari and mail - opening a link, then back to mail to open the next one.

I have the same problem with mail that I receive from LinkedIn groups that I follow. I found that if you press and hold the Command and Option keys when you click a link it will open behind mail, in Safari.

Sent mails duplicate copies in Inbox

I have setup a POP gmail on Mail 4.1. It seems that every mail sent from my Mail app, it will forward a copy to my inbox right away. (It's already unchecked on the Composing tab, that says "Automatically cc: myself")
Is there any way to stop this? Thanks in advance!
Des

V.K. wrote:
desmawn wrote:
I have setup a POP gmail on Mail 4.1. It seems that every mail sent from my Mail app, it will forward a copy to my inbox right away. (It's already unchecked on the Composing tab, that says "Automatically cc: myself")
it looks like that option was not cleared in the mail preference file.
try checking that option. close mail preferences. then open mail preferences and uncheck that option. see if that helps.
Hi VK, appreciate your information, but it's still sending the mail back to my inbox again. I wonder if I might have messed up with some applescripts earlier that I have used to delete duplicates messages in mail. Is there any way to undo applescripts? (in case it's the script that triggers my problem.)
Once again, thanks!

Links in mails forwarded by an inbox rule get broken/removed

Similar Messages

Maybe you are looking for