Links in my PDF work in Acrobat Pro and Apple Preview, but not in Adobe Reader.

Links are created in InDesign. Is there a solution for this?
I need the forms to work in Readder as well.

What kinds of links?

Similar Messages

  • I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7

    I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7. Surely there is software that will allow older scanners to work on OS10.7. My MacBook Pro runs 10.6 and the

    Although the HP Scanjet shows up in the system profile for the computer it is generic and is not configured (as in screen shot).  It also does not show up in the ;ist of pritnters, scanner when I open Image Capture.  I can't load the software that came with the printer because it is out of date so that would make it impossible to configure the scanner on the new iMac. see below:  Too bad there isn't some generic profile I could load that would cover the 5550c. I have a new all in one printer-fax-scanner but the old one can scann in slides and negatives which I have.

  • HT1386 I am having trouble synching all 1700 songs that I just put into iTunes Music Match onto my iPod Classic device. It worked on my iTouch and iPad devices but not the Classic. How do I transfer the music successfully

    I am having trouble synching all 1700 songs that I just put into iTunes Music Match onto my iPod Classic device. It worked on my iTouch and iPad devices but not the Classic. How do I transfer the music successfully

    It should sync the same if the songs are the same. You can try:
    - Unsyncing all music and resysncing
    - Restoring the iPod
    BTW, yo posted in the iPod touch forum

  • PDF is searchable with FoxIt but not in Adobe Reader X. Exact same .PDF file is loaded. Why?

    I have been trying to figure out why my .PDF file was not searchable in Adobe Reader X. I downloaded and installed FoxIt PDF software to see if it was a problem only in Adobe Reader X and to my amazement it was Adobe Reader X that is the failure. But why? Does anyone else experience this issue. That is, loading .PDF files that are not searchable in Adobe Reader X but work perfectly fine in FoxIt?

    Hi,
    What i understood from "searchable" is "searching text in a PDF document" , am I right?
    which version of Adobe Reader are you using ?
    Please also share the PDF file in which you are facing the problem in searching with Adobe Reader.
    Thanks.

  • Pdf files viewable in ibooks but not in adobe reader?

    I can open and view pdf files in ibooks but i downloaded adobe reader and they arent even showing up. The file is a text book and is too big to email myself. any suggestions?

    Adobe recommends against have different versions of the same application installed at the same time. They also discourage having Reader and Acorbat installed at the same time. I would install version 6 and repair or reinstall version 9.

  • .pdf works in Acrobat Pro 8 but not Adobe Reader 8

    I have a dynamic .pdf that I created in Livecycle Designer.
    It works perfectly in Acrobat Pro 8 but not Adobe Reader 8.
    There is a function that highlights a form field orange. It is called from the enter event of every form field.
    There is another function that highlights a form field red if the field contains an invalid value. This is called from the exit event of every form field.
    When I enter a field in Reader 8, it highlights orange as it should but does not allow me to enter a value and it adds an additional blank page to the .pdf. Also, it does not highlight red as it should on exit.
    If I remove the enter script, the exit script works fine.
    I sent the .pdf to somebody to test and it worked perfectly for him in Reader 8.00 but not for me in 8.00 or 8.01 which makes me think maybe it is just a problem with my settings.
    Can anybody help?
    Thank you.

    Okay, I just upgraded to Acrobat Pro 8.1 and the .pdf fails there now too.
    So my problem is not an inconsistency between Acrobat and Reader, it is that the .pdf works in the earlier 8.0 but not the latest 8.1.
    I am happy to send the .pdf to anybody who wants to see it. Hopefully the problem is with my code and not the update.
    Thanks.

  • Created a pdf from a word-file and inserted formfields. The fields works in other pdf-readers(nitro,reader etc), but not in adobe reader and acrobat. Please help.

    Hi,
    I have created a pdf from a word-file and inserted formfields for a work related file. I've used nitro pro to create the formfield. They works in nitro, reader, foxit etc. but not adobe reader. From page 3 and out, the font wont show when writing in a formfield. Some formfield doesnt even show.
    Please help me fix this (hopefully before the presentation at work friday) :-)
    File in question: Dropbox - Byggeplassperm_bico_prosjektledelse_2.pdf
    Kind regards
    Tobias

    Agreed. Adobe makes no claims that their Reader will work properly with forms made from third party software.

  • PDF opens and works correctly with Windows 8 Reader, but not with Adobe Reader.  Why?

    Hi,
    My sister-in-law has this PDF order form from one of her company's distributors that opens and allows editing of specific fields.
    The only application that opens the file correctly (visually and functionally) is the Windows 8 Reader.  If I open the file in Adobe Reader or with the Mac viewer things do not line up, fonts are too large, and when editing fields sometimes symbols show up and sometimes way over-sized numbers show up.
    This behavior has been observed on both a Windows 8.1 PC as well as on a Mac Book Air.
    Can someone please tell me why this is happening?  Is there something that needs to be configured differently?
    Thanks,
    Matt

    This is what I see when I open that PDF in Adobe Reader 11.0.07:
    Can you tell me which parts are not correct?  Obviously the Submit button is a bit strange.

  • Form Sends Email from Adobe Pro X but not from Adobe Reader x

    I have windows 7, adobe pro X and adobe reader X, and thunderbird 9.01 email client.
    I have a PDF form (created in lifecycle 9.0.0.2_) that is complete and is reader extended though adobe pro x.
    It will send the email correctly in abobe pro x, it opens all the correct windows etc and sends, and I receive the filled out PDF form.
    When I open the form in adobe reader X it opens the correct window as before, but never sends the email.
    Can any one here be of some help.
    Thanks
    Steve

    Did you reader extend the form?
    Open the form in Adobe Acrobat PRO.
    Goto Advanced menu -> Enable usage rights in Adobe Reader and save file..
    Thanks
    Srini

  • Form save works in Adobe Reader 8 but not in Adobe Reader 9

    We have an FDA form that customers fill out and save in Adobe Reader.  The form worked perfectly with Reader 8, but we are seeing the following Adobe Reader error with Reader 9:
    "This document enables Reader capabilities that are no longer in this Reader version."
    Also, in Reader 8, the purple bar at the top reads:
    "Please fill out the following form. You can save data typed into this form."
    However, in Reader 9, the purple bar reads:
    "Please fill out the following form. You cannot save data typed into this form.
    Please print the completed form if you would like a copy for your records."
    The same PDF form was used for both readers.
    Does anyone have any ideas?  Did Adobe really disable this capability in Reader 9?  Their website states you can save forms with Reader 9.

    Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.

  • Accessing SOAP Web Services: Running on Acrobat 9, But NOT on Adobe Reader 9.

    Hi All,
    I am using webservice to populate form control. It is working fine in Acrobat 9 but When I am opening form in Adobe Reader 9 its NOT WORKING. Its niether giving any error nor any respone. Do Adobe Reader need some extra code to access/run web services or where I am wrong? Please help.
    Thanks.
    Abhinav

    Hi Anhinav,
    Because reader is not "extended" Web Services will not work on Reader.  They do however (as you've noted) work in Acrobat, which is "extended".
    To make web services work in Reader, you will need to purchase the LiveCycle Reader Extensions.
    Hope that helps.
    Jay

  • PDF won't print in Preview but OK with Adobe Reader

    Periodically (and rarely) I run into a problem where an application yields a PDF for printing, is submitted to the print queue of my Laserwriter 16/600 PS, and instead of printing, the following message pops up briefly before the job is wiped out:
    the process "cgpdftops" terminated unexpectedly on signal 6
    The same problem occurs if I choose to preview the output first, in which case the job is submitted by Preview, and that yields the same result.  However, I open the same PDF document using Adobe Reader, it prints fine.
    Any thoughts?

    On the Print dialog under Page Sizing & Handling, did you try Fit or Shrink oversized pages?

  • Printing from web pages is excruciatingly slow with most recent upgrades of Firefox .Use an iMac and an HP officejet printer. Printer works fine with Safari and woodprocessed files, but not with Firefox and web pages.

    Printing from web pages is excruciatingly slow since downloading most recent upgrades of Firefox Mozilla. I have a desktop iMac, OS 10.6.8, and an HP officejet printer 4500 G510n. The printer works fine with the Safari Browser and with woodprocessed files, but not with Firefox and web pages. Help please! It used to print fast with earlier versions of Firefox.

    Hello and welcome to the Apple Discussions Forum.
    I have hardly any experience with HP printers but since your posting has not been replied to yet I thought I'd offer some assistance.
    With the printer status and ink levels working, it shows that you have a connection to the printer. So I would look at the issue being with the protocol being used for the print queue on the Mac.
    Since you have XP and Vista working, I would check the printer queue configuration on either box. In XP, go to the Properties and select Ports. Click the Configure Port tab to view the connection. If you are using RAW, then this is known as HP Jetdirect-Socket on OS X. So if you are not sure what protocol was used before I would create another printer queue, this time selecting IP > HP Jetdirect-Socket. Then enter your IP address and select the K5400dn from the Print Using menu.
    If this still fails to print then please reply. There may be limitations with adding the HP driver this way that I am not aware of. There may also be other driver options you can look at, such as HPIJS. If Greg Sahli reads this posting he has expert knowledge on this matter and will be able to offer some guidance.
    PaHu

  • Rh10 - HTML Help - linking to pdf shows when generate CHM and 'view results' but not when double-click on CHM in project folder or in product help

    I have several PDFs in Baggage Files that are linked to topics in the Table of Contents.  When I generate the CHM file and 'View Results' I am able to pull up/access the PDFs with no problem.  When I go into the project folder and just double-click on the CHM file, I cannot pull up/access any of the PDFs nor can I access them in the product help.  Any ideas?  Is a setting "off" somewhere in my project?
    I am using RoboHelp 10.
    Thanks!

    eeddings wrote:
    Thanks for the idea, but I can't switch the project to WebHelp.  This .chm project consists of a master project with 18 slave projects and a slew of remote jumps.  I'd have to recreate all of the remote jumps if I switch to WebHelp.
    Hopefully Adobe can fix this issue.
    Well, first off, even though it would be WebHelp, it would be inside a CHM container. So for all intents and purposes it would be a CHM file. But having said that, I'm not sure there is a way to merge these hybrid types of CHM files.
    If your statement about Adobe fixing the issue is meaning that they can either remove the Print icon from the CHM Viewer, I wouldn't hold my breath because as I said, that's in Microsoft's lap and they haven't updated the CHM viewer in a long while. Doubtful they ever will.
    The only hope would then be for Adobe to update the code used for the Mini TOC. The only way that will happen is if enough folks submit this as a bug via the following link:
    http://www.adobe.com/go/wish
    Until that would happen, your likely best bet is to simply avoid using the Mini-TOC feature or just insert a warning that if the topic is printed, it will cause issues. Or, you could use bookmarks and links to establish your own verision of a "Mini-TOC"
    Cheers... Rick

  • Msft ent desktop 7000 works with Macbook Pro 10.5.8 but not mini 10.6.1

    I just purchased a Mac Mini with 10.6.1. I'm using it as an entertainment system hooked up to my 60 inch plasma. I bought a Microsoft Bluetooth Entertainment Desktop 7000 keyboard and mouse. i like the keyboard and it all works except for the integrated trackpad. At first i thought it was because it wasn't fully Mac compatible but when I tried it on my Macbook Pro 10.5.8 the trackpad worked fine.
    Any suggestions??

    Hi,
    This is a guess: The MacBook Pro has a built-in trackpad, while the Mac Mini doesn't. Maybe it's missing a driver. When you have it connected to your MacBook Pro, try to look at your "Trackpad" system preference. Does that exist on your Mini? Also, try comparing the System Profiler outputs, especially concerning your USB.
    It makes it a little more challenging when your systems aren't both the same OS level :-D, so some things will be different between the two systems just due to the OS levels.
    David

Maybe you are looking for