Links in Word do not convert to PDF

I have a word document I created in Word 2008 with a lot of links. When I convert it to PDF (Print, Save as PDF), the links do not work in the conversion to PDF - Adobe Acrobat.
I can't figure out what the problem is and I have a ton of similar files to convert.
Does anyone know how to fix the problem?
Thanks

Yes and you keep rubing it in. ;-)
It just sufficient enough to say its not in Mac Version.
You don't have to sound proud of the fact. Or appear to be thumbing your nose at Mac Users about it. We have it tough enough, and no amount of complaining to adobe and other software companies does any good. Until Mac users turn out to 50.1% of the market share will anything change. :-(

Similar Messages

  • I have payed for Adobe acrobat pro but now i can not convert a pdf document to a word format, why?

    I have payed for Adobe acrobat pro for one year and it is valid to november 2015, but now i can not convert a pdf document to a word format, why ?

    Hi m_karhulinna,
    If you have Acrobat Pro, you can save directly to Word format from within Acrobat by choosing File > Save as Other > Microsoft Word > Word Document.
    (It sounds like you may be trying to use the ExportPDF online service, which is separate from Acrobat, and not necessary in your case.)
    Best,
    Sara

  • I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership

    I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership

    You need to contact Adobe Customer Support :
    They will check and assist you. (Live Chat)
    Contact Customer Care

  • What to do when file will not convert a PDF to Word "properly"?

    Is there anything I can do when a file will not convert from PDF to Word (for editing purposes)?
    It converted some of it fine, but most of it is converted into symbols and letters of some text has been changed.

    Hi Michelle ,
    You can simply edit that file in Acrobat itself .
    Or if you could brief us little more about your requirements ,we would be able to assist you intelligently .
    Regards
    Sukrit Dhingra

  • Some fonts do not convert to PDF

    I'm using Pagemaker 7.0.1a on WinXP. Some fonts such as Sanvito (open type) and Myriad Pro (true type) appear fine in PM but do not convert to PDF where they appear as X placeholders as shown below. Top group is Sanvito, bottom is Myriad, Times worked OK. On the other hand, they convert just fine when converting MS Word to a PDF. My system uses Acrobat Distiller 7. Can anyone explain why this is happening?

    Because PageMaker has been a dead program for nearly a decade and is known not to work reliably on the newest OSs, including XP, while Word is still being developed. If I were you, Iwould move on to InDesign while the generous discount upgrade from PageMaker is still available. I wouldn't be surprised if the offer expires when CS5 comes out.

  • Solid color text boxes in MS Word are not importing to pdf

    Solid color text boxes in MS Word are not importing to pdf ... text boxes with pics import and convert fine. Using Word 2013. Any ideas?
    I'm brand new to the forums, so sorry if I'm not asking correctly or asking something already covered.

    Hi Sara!
    Thanks for the response.
    I'm uploading a Word file to my Adobe PDF Packet Annual subscription. I'm running Windows 8.0. Normally I will create a document in MS Word 2013, save it into our dropbox and then when I need to send it to someone (printer in this case) I will log onto Adobe PDF and upload the file to convert. Once it's converted, I'll send the pdf to the client or printer. In this case I created a poster with our logo (in a text box), text, a star (in a text box) and a few solid colored rectangles. Everything converted beautifully - as usual - except the solid text boxes.
    I've used Adobe PDF Packet for a few years and have never seen this. Any ideas or other questions?
    thanks, Dave

  • Adobe Acrobat 8 will not convert a pdf to a jpeg

    Adobe Acrobat 8 will not convert a pdf to a jpeg. It just gives an error message and shuts down every time I to save it as jpeg. Any advice why this conversion will not work?  I use a PC and run Windows 7.

    The Acrobat 8 product family passed into End of Support years ago.
    Acrobat 8 is not compatible with today's OSs.
    Be well...

  • I can not convert my pdf to excell, i paid the fee but it keeps telling me to join

    I can not convert my pdf to excell, I paid the fee but it keeps telling me to join

    Hi,
    I could not find your Adobe ID(under your current email address) in our database for our service so please make sure to use correct Adobe ID you used for your subscription.
    Thank you.
    Hisami

  • I have a 54MB Tiff that will not convert to PDF in the the online or desktop version.

    I have a 54MB Tiff that will not convert to PDF in the the online or desktop version.  It crashes at page 211 in Windows Photo Viewer when trying to print it to PDF.
    Sean
    6023639400

    Sounds pretty definitely broken.

  • Will not convert a PDF file to Word

    Since Wednesday, 12/10, I have not been able to convert a PDF file to Word.  We have a paid subscription to do that and it looks like our account is active and in good standing.  This is very frustrating.  Who do I contact for technical support.

    Sorry, not sure what that means.  Do you mean to convert on the website?  If that is so, it won't convert there either - as I tried this morning.
    If mean something else, please forward the website address.
    Thank you, Kathy

  • Have followed the steps but still could not convert my Pdf to Word

    Have followed the steps but still could not convert Pdf to Word

    You need to update it from iTunes on a computer.
    (73555)

  • Hyperlinks in Word 2007 not appearing in PDF file

    I am not sure if this is more of a Word problem, or an Acrobat problem.
    However, I have a document in Word that contains a table of contents and several cross-references that are hyperlinks to locations in the document. In the Word file, you can CTRL + click and you will be taken to the destination of the hyperlink, for example to a topic in the Table of Contents.
    I used to make these a couple years back and they worked fine.
    I am using Word 2007 on a PC with Acrobat 8.1.2. I have tried both the Standard and the Rich Content PDF job options and neither of them seems to give me hyperlinks in the finished PDF file. Am I missing something?

    I've also had problems carrying links over from a Word file (I'm using Word 2002). External links in footnotes are not carried into the PDF file unless, using Change Conversion Settings - Settings, the 'Enable Accessibility etc.' box is ticked. Even then, in a 2mb file, with a lot of footnotes, whether the links are carried into the PDF file seems to depend on which computer I use. OK with XP and 1.5gb; but with Vista and 3gb the links do not appear in the PDF file. In either case its a 10+ minutes process.
    If you don't tick the box, links in footnotes are carried over only if the actual URL appears in the text. However, the process is much quicker.
    Ed McG

  • Using Word doc after converting from PDF

    I have just purchased Adobe Export PDF purely to complete a Job Aaplication form in Word rather than PDF but the Word document does not allow me to edit it properly - i.e. I cannot expand the text boxes to make them bigger and when I try to add in information like my name and the post I'm applying for, it moves existing text from the original PDF doc onto different lines. I assumed once I'd converted it I could use it like a normal Word doc but it seems not. Please advise what I'm doing wrong, thank you.

    Hi Disc9,
    In order to help you. Let me know which application of Adobe you are using including the version.
    Also let me know the complete workflow how you convert the PDF to docx/doc.
    Regards.

  • Links from RoboHelp don't convert into PDF file when "printing to PDF"

    I need to output my webhelp file to an Adobe PDF. However, my
    links are not converting UNLESS I put in part of the code. mailto:
    links will work if there is a visible @xxxxx on the screen.
    Regardless of the background code, if I don't have the @xxxx
    visible on the page, the link will not work. The "hand" will not
    turn into a "pointing finger" in the PDF file.
    I've looked at the settings, and am beating my head against
    the wall! This is a manual that will be published to a PDF on a
    weekly basis, so redoing all the links in Adobe is not a solution!
    I need my links to other parts of the manual, URLs and email links
    to work as the do in the RH side. All suggestions welcomed!
    Thanks!!
    p.s. I am using RH 5.0.2. The Adobe side is 7.0 Thanks!

    Hi Teri
    Links are retained in the version 6 release.
    Just some food for thought...
    Cheers... Rick

  • How do I get word file to convert to pdf

    How do I get word to convert to pdf? It worked yesterday and not working today.

    Hi Whiteowl 1957,
    What are you using to convert the Word file, and what is happening when you try? Do you get an error message? If so, what is it?
    Are you using Mac OS or Windows?
    Regards,
    Sara

Maybe you are looking for

  • How do I add a digital signature to my online form?

    With regular Adobe (Standard or Professional) software, you can add a digital signature line.  I want to know how I can do it on FormCentral. When I PDF the form I created on FormCentral and try to add the digital signature in Adobe, I get a message

  • IMac Novice Needs Help

    My first desktop was a Macintosh. Since then I have had 22 years of PC's. I am back now with my new iMac but my machine appears to be running slow. Will an upgrade in memory from 512 MB improve performance? The price of an upgrade at the Apple store

  • Doubt about aggregates?

    hai i have doubt that aggregates contain request ids or not? and if one cube has 4 aggregates and i want to load latest request only into 2 aggregates where can we do ? bye srinu

  • Documentation on "Deployment" causing confusion; Clarification needed

    I am new to OWB. I have been reading the first chapters of OWB documentation and the following line causes confusion. "Deployment is the process of copying the relevant metadata and the code you generated in the design center to a target schema." Thi

  • Spinning beach ball when opening CS3

    First I wasn't able to connect to any of my sites, now I'm getting the "spinning beach ball of death" every time I open CS3. It is completely unresponsive and I have to "force quit" to get out of the application.