Links Not Working With Secondary Display

I have several website links in my presentation. When I am in presentation mode on my MacBook Pro and click a link, it opens up in Safari. All fine. However, if I hook up a secondary display not in Mirror Mode, so that my presenter screen/notes are on my MacBook Pro and the presentation is actually running on the secondary display - and I then mouse to the secondary display and click one of the web links, they do not open in Safari. Nothing happens.
Is this the correct behaviour? I would have though the links would still open in Safari?
Any help asap would be greatly appreciated!
EDIT: Upon further investigation, I found that deselecting the preference "Allow Expose, Dashboard and others to use screen" allows the links to work again. Of course, the problem now is that when I return to Keynote after clicking a link, my slide builds have all been reset which is not good. Am I stuck with one problem or the other?!
Thanks,
Mike

Oh, well, it just randomly started working. Nevermind! Please
delete...

Similar Messages

  • Navigate Value Interaction not working with UNIONs displayed as pivot

    hi all - If created dozens of requests the uses drilling. Now I'm getting strange behavior in a certain scenario...
    I have a request that is a pivot view and contains UNIONs. One of the columns, employee name, is set up as 'Navigate' for the Value Interaction property. The request drilled to has employee name set up as 'Is Prompted' in the criteria.
    If the main request is displayed as a table view, the drilling works fine - the drilled to request opens with the intended employee that was clicked on in the main request. However, if the main request is a pivot view (which is the view I want) instead of a table view, the drilling does not work as intented - the drilled to request opens with all the employee names. I just want to drill on the clicked upon employee, not all the employees.
    I'm using OBIEE 10.1.3.4.
    Any suggestions as to why this would work as a table view but not as a pivot view?
    Thanks!

    The best solution is to define hyperlink for the detail report in the report column itself. Change the expression of column to HTML hyperlink. (Make sure value interaction is disabled) Use Go URL syntax to navigate to detail report and pass parameter, something like below:
    <pre>'&lt;a href=”saw.dll?Go&Path=/Shared/ReportName&Action=Navigate&P0=1&P1=eq&P2=Emp.Name&P3=’ || Emp.Name || ‘">’ || Emp.Name || ‘&lt;/a>’</pre>
    This link has more details:
    http://www.iwarelogic.com/2010/09/integrating-oracle-obiee-content-using-go-url-850/
    http://www.iwarelogic.com/wp-content/uploads/blogimg/2010/09/image006.jpg
    Hope this helps

  • IWeb Page Navigational Links not working with Internet Explorer 7

    I'm hoping someone can help me out here? My wife created her 1st website using iWeb. I am testing the sites functionality before we publish it. All the pages and links work fine on Firefox and Safari for windows. However, the page navigational links are not working on Internet Explorer 7. All I see is a dot to the left side of where the page links should be. When I start the site in IE7 I get an Active X script warning and I am asked if I want to allow the script to run; to which I reply yes. After I allow the Active X script the dot to the left side of where the page links should be disappears, but the links do not appear.
    Is there anyway to resolve this? Most of the members of her club have Windows based PCs and are using IE7.
    Message was edited by: cviz821

    Yes, Javascript is running on IE7 and other java script applets appear to be working with the exception of the Navbar script.
    It would be great if my wife's friends used a "real" browser, unfortunately 70% of the people on the web use IE7, so this is a real concern if we can't get this to work. I'v seen other iWeb site on IE7 that seem to function fine, so I'm not sure what the issue is here.
    Message was edited by: cviz821

  • Screensaver/ not working with 2 displays (Boxee, XBMC)?

    Hi there, i've got following setup;
    2011 iMac 27" at 2560x1440 (Display 1)
    Sony 42" LCD connected via MiniDV to HDMI at 1920x1080 (Display 2)
    Boxee mediaplayer software for OSX (http://www.boxee.tv/make), however the same issues apears with XMBC software (hereafter Mediaplayer)
    Configuration:
    - Mediaplayer has been configurated to use Display 2 only
    - OSX Screensaver is set to kick in within 5 minutes on Main Screen Only (=Display 1)
    - Display sleep is set to kick in at 20 minutes
    Issue description:
    - Mediaplayer works perfectly, plays movies on Display 2
    - However the screensaver does not kick in on Display 1 while Mediaplayer is active, even not after some hours, same for Display sleep
    - FYI there are no overlapping items or windows from Display 1 to 2 and vice-versa.
    Questions:
    Does anybody have a clue what could be wrong here?
    How can i blank (or at best turn off) Display 1 while watching a movie on Display 2 either by using standard OSX settings or by some utility?
    Thanks

    Have had same issues trying to edit HD video with Mac Pro system using ATI Radeon 4870 HD, with latest snow Leopard sw rev. SOMETIMES the card works fine- displaying Final Cut Pro Browser video on my 30" Apple cinema display coming out from the multi pin output of the 4870, and a Sony 46" Bravia for client review, via the mini DVI output, using an Apple purchased Moshi, mini DVI to HDMI converter. An earlier posting suggested that the sequence of booting up was the root cause, but I'm not sure about that. Apple FCP support pointed to plist corruption, which also seemed to resolve the problem for awhile, but again, it resurfaced. Now Apple claim that they will not certify that it will provide HD video out from that configuration (mini DVI to HDMI), which is strange since it works, but not consistently. A friend who has the same card, suggested root cause may be that Quartz Extreme support under my System Profiler / Hardware / ATI Radeon 4870HD is missing! Another person reported that when he upgraded recent SW, it disabled Quartz Extreme- not sure whether this is root cause yet or not. Still not resolved. Suggestions welcome.

  • Mercury Transmit not working with vertical display arrangement

    I've been using Mercury Transmit with my displays side-by-side successfully.
    Today, I moved my 1080p external monitor behind my built-in retina laptop display, and I can no longer transmit to the built-in, while working on the external.
    However, I am able to work on the built-in while transmitting to the external, but this is not ideal, since the built-in has more accurate colours.
    This works ^^^
    but this doesn't work:

    2 positions (top or bottom) * menu bar position * Transmit which Display = 8 combinations
    Of these eight, only two work: Arrangement 1 and Arrangement 5
    Arrangement 1 is bad because I am transmitting to the external monitor which has poor colour gamut.
    Arrangement 5 is bad because the screens are placed inverted to their physical positions; I have to travel upwards to go to the bottom screen.
    Arrangement 7 is the target.
    The picture at the bottom is the limit when Mercury Transmit will stop working. If I move the lower screen any further to the right, Mercury will stop.
    1A
    1B
    2A
    2B
    3A
    3B
    4A
    4B
    5A
    5B
    6A
    6B
    7A
    7B
    8A
    8B
    LIMIT

  • Aperture fullscreen not working with external display

    Hi,
    I have a Macbook Pro, however when I am using Aperture and have my 23" display connected, it won't let me use fullscreen mode on the display even though it has the Aperture window there. The display simply become black and Aperture starts up fullscreen mode on my Macbook display instead.
    Why is this? How can I get Aperture to do fullscreen on my external display?
    Thanks!

    To choose what the secondary monitor will display you have to click on the button on the bottom left of the screen (with a monitor on it).
    Unfortunately Aperture won't allow you to choose which is your primary or secondary display, you'll have to do it in System Preferences - Displays, then in the arrangement section drag the top bar from one to the other. That will make your external monitor primary for all the applications.

  • Index.html as a link not working with Weblogic 6.0 SP2

    we use weblogic as a webserver with one of our web applications.
              The index.html page is a soft link pointing to one of 2 pages.
              1 page is a site up page and the other is a site down page.
              Using a soft link worked fine with WL60 sp1 but when we moved to SP2
              we now get a 404 when trying to load the index.html page.
              Any ideas why this would be broken?
              Terry Carter
              

    Terry,
              This is a known problem, and CR058420 was opened to address this
              issue. For 6.0, there is not a patch available. The recommended
              solution is to upgrade to 6.1 and apply the appropriate patch.
              Thanks,
              Simon
              Developers Relation Engineer
              BEA Support.
              Terry Carter wrote:
              > we use weblogic as a webserver with one of our web applications.
              > The index.html page is a soft link pointing to one of 2 pages.
              > 1 page is a site up page and the other is a site down page.
              >
              > Using a soft link worked fine with WL60 sp1 but when we moved to SP2
              > we now get a 404 when trying to load the index.html page.
              >
              > Any ideas why this would be broken?
              >
              > Terry Carter
              

  • FireFox 13 Search Bar not working with TB display

    I have a strange problem.  I have a new 13" MB Air (mid 2012 model) and I have it attached to a Thunderbolt display.  I use FireFox 13 for browsing.  When my MB Air is solo (i.e., not hooked up to my TB display), the search bar in the top right of the FireFox screen works normally.  When I have the TB display hooked up (both in clamshell and extended desktop mode), the search bar doesn't work (keep getting an error that the connection was reset).  I am having the same problem with the address bar search function as well.
    I have tried deleting the appropriate files in the FireFox Profiles folder (formhistory.sqlite, search.json, search.sqlite...all after quitting FireFox), but to no avail.  Sometimes after doing this the search bar will work once, but then on a subsequent search I get the same connection reset error.
    Thoughts?

    I have a strange problem.  I have a new 13" MB Air (mid 2012 model) and I have it attached to a Thunderbolt display.  I use FireFox 13 for browsing.  When my MB Air is solo (i.e., not hooked up to my TB display), the search bar in the top right of the FireFox screen works normally.  When I have the TB display hooked up (both in clamshell and extended desktop mode), the search bar doesn't work (keep getting an error that the connection was reset).  I am having the same problem with the address bar search function as well.
    I have tried deleting the appropriate files in the FireFox Profiles folder (formhistory.sqlite, search.json, search.sqlite...all after quitting FireFox), but to no avail.  Sometimes after doing this the search bar will work once, but then on a subsequent search I get the same connection reset error.
    Thoughts?

  • Rapidshare link not working with WRT110 wireless router

    I am trying to download using rapidshare but after the countdown timer reaches zero and the download link button appears, i couldn't get the link for the download file. This happens when i am wireless but when i connect my laptop directly to the linksys WRT110 router via LAN cable, i can get the link for the download file without problems.
    What settings do i need to do to fix this?  The rapidshare says it might be due to a rotating IP address or something. Only the rapidshare website is having this problem, other downloading sites doesn't seem to have this problem.
    i am using a WRT110 router, with no security, on a wireless connection on my laptop on windows vista, using firefox.

    Tried Internet Explorer 7, its the same problem. it still takes some time before i can get the link for the download file. Although i sometimes can get it faster with IE than with firefox.
    Any solutions to this problem? I still thinking its the Routers configuration that has to be modified to solve this problem.

  • Email link not working with office 201o wont open word when i click on a email address

    when i click on a email address. firefox does not open word for sending a email nothing happens. works fine in internet explorer and worked in firefox till i upgraded says it loaded office 2010

    Check the '''Action''' for ContentType '''mailto'''.
    https://support.mozilla.com/en-US/kb/Firefox%20keeps%20opening%20many%20tabs%20or%20windows#w_change-the-action-for-a-content-type

  • Command Link not working with Tabbed Pane

    I am calling one action on click of CommandLink in a DataTable,
    When I submit the action from an individual page , It is working fine,
    When I include that JSP in the TabbedPane , it is throwing JavaScript error "Error on the page" and action won't submit.
    Please help me in resolving out this issue.
    Thanks
    Gifin

    please put here the problematic code...

  • TS4139 I had 2 MobileMe email addresses, but only went thru ICloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with both addresses? Can I get that address back?

    I had 2 MobileMe email addresses, but only went thru iCloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with each address? Can I still get that secondary address to work with iCloud?

    It was totally separate. I just now went back to a previous email from Apple to that secondary address which urged me to transition to iCloud. I followed the link and it prompted me thru the process and the address is now able to send/receive emails. Thanks.

  • On updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.i cant see menu page on display screen

    on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
    i cant see menu page on display screen

    http://support.apple.com/kb/HT1808

  • FaceTime HD Camera (Display) not working with most applications

    The Thunderbolt 27" LED Cinema displays built in camera is not working with most applications. The camera does not work with FaceTime, iChat, Skype and Google Talk. FaceTime says "There is no connected camera", even though there is. Weird thing is it DOES work at http://www.testmycam.com. I can't get it to work with any other flash based apps, just testmycam.com.
    My MacBook Pro 17" (late 2011) built in camera works perfectly with everything.
    Things I've already tried:
    - Shutdown
    - Restart
    - disconnect/reconnect
    - removing power from display
    lame, lame, lame. $1k monitor, flippin' webcam doesn't work.

    I think I have found the problem. I decided to go page by page through the forums and found this argument when running a Java program through the console:
    -Dsun.java2d.noddraw=true
    So it would be like:
    java -Dsun.java2d.noddraw=true SwingSet2
    That works flawlessly, so it has to do with direct draw (So it's either DirectX or my video card drivers which are up to date).

  • Display not working with new operating system

    I recently installed OS X version 10.8.2 and now my large apple display will not work with the MacAir.  Anyone know how to fix this?

    Return to place of purchase while in your 14 days from date of purchase window. You may have a defective monitor or GPU.

Maybe you are looking for