Links on older Blogs are not working

I am having issues getting to all the parts of The New Class-Based Exception Handling in ABAP, not a recent Blog. IE troubleshooter reports the service does not accept the connection when I click on a link and the connection fails.

Is it these:
The New Class-Based Exception Handling in ABAP - Part 1
The New Class-Based Exception Handling in ABAP - Part 2
The New Class-Based Exception Handling in ABAP - Part 3
The New Class-Based Exception Concept in ABAP - Part 4
The New Exception Handling Concept in ABAP - Part 5
I found them searching for the title using site search (top right of every page).

Similar Messages

Links in the webview are not working.

Hello Everybody,
I am showing data in the webview using one custom html page. In this custom html page , I am using css to make the font better and then passing my required data in the respective tabs. In one this tag i.e. description tag, I am passing the description html data in that links are also present. WebVIew is showing the data in page correctly but links present in that page are not working. When I am clicking on those links, they are not getting open in the webview.
I am working on this issue from two days but no solution I found.
Is there anything , I am missing?
Can anyone here, help me out?
Pandit

Hi Satake,
Sorry for the late response.. I was out for some days...
Actually , there was presence of target= {blank}, but I removed it from that html string as per your advice but didn't work.
The html page which I am showing in the webview is custom webview , I mean it's a html template and I am passing description data in one description tag.. and that description data is having that link that is not opening after clicking on it.
On the other hand , if I passed only html data without html template file then it is working fine.
Is there any problem in my html template page which is a custom page? Or I need to add any property in the description tag to enable the links?
Pandit

Links in pdf doc are not working when viewed in Reader 9, but works with Reader 8

Hello,
When I view a pdf document using Reader 8, the links in the document work. However, when another user views the pdf document using Reader 9, the links do not work for them. Any suggestions?

Are they hyper links or are they spelled out (http://...etc)?
If they are spelled out, it could be because the person using 9 needs to select "create links from URL" in Preferences>General>Basic Tools.

In JEditorPane the links in HTML file are not working

hi,
I am using JEditorPane to dispaly HTML file.
In the html files there are some links to some other pages.
The JEditorPane is showing the links but it didn't work when i click.
Is there any Events which i have to add?

Try posting in the Mac Number forum.
https://discussions.apple.com/community/iwork/numbers
Also, specify the version of Numbers you are using.

Relative links of local drive are not working

I am trying to develop an interactive pdf having animations and links of files placed at same folder having interactive pdf. I tried by using hyperlinks but on export it convert it in absolute addresses.
I also tried by using button (action: open file) but could't get results
Plz help me

Hi Rick.
Thanks for replying, but as I said earlier, I do not want to
use a Shortcut, but wish to only link to the PDF. The more I think
about it, the more I believe I wish to embed the PDF inside the CHM
file, so long as it preserves the formatting and launches Adobe
when the link is clicked. Is there any way to do this? If not, is
there a simple way to launch an HTML file that contains the PDF
links or maybe even an explorer window? I am not willing to use
scripts due to most of my users having very high security settings
on thier computer.
Thanks,
Dan

Links in the document are not working

Hi All,
In my program there shows a document, if the document has any hyper links, upon clicking on the link, its not going to concerned document.
Can you all please help me?
Thanks in advance.
Best Regards,
Prasanth

hi
after doing all the initialisation, this part of the code is called
CALL FUNCTION 'DOCU_GET'
 EXPORTING
 id = 'DT'
 langu = sy-langu "TEST !!!
 object = ld_object
 IMPORTING
 head = ls_thead
 TABLES
 line = gt_texttab
 EXCEPTIONS
 no_docu_on_screen = 1
 no_docu_self_def = 2
 no_docu_temp = 3
 ret_code = 4
 OTHERS = 5.
 CALL FUNCTION 'SAPSCRIPT_WWW_DOCU_TO_HTML'
 EXPORTING
 i_funcname = 'SAPSCRIPT_WWW_ITF_TO_HTML'
 i_keyword = ls_thead-tdname
 i_area = ls_thead-tdname
 i_textid = ls_thead-tdid
 TABLES
 html = gt_htmltab.
Load HTML, generate url
CALL METHOD go_htmlcontrol->load_data
 IMPORTING
 assigned_url = ld_assigned_url
 CHANGING
 data_table = gt_htmltab
 EXCEPTIONS
 dp_invalid_parameter = 1
 dp_error_general = 2
 cntl_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Display generated url in HTML viewer
CALL METHOD go_htmlcontrol->show_url
 EXPORTING
 url = ld_assigned_url
 EXCEPTIONS
 cntl_error = 1
 cnht_error_not_allowed = 2
 cnht_error_parameter = 3
 dp_error_general = 4
 OTHERS = 5
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Have a look and let me know the details
Thanks.
Prasanth

Start menu Pins and Links are not working

Hi,
after upgrade to Build 10061 the start menu links and pins to classic win32 apps are not working anymore. If i click, for example VLC Player, nothing happens. Also if i pin VLC Player again to start menu nothing happens if i click on it. Only through search
and direct explorer access it works as expected.
Are you experiencing the same issue or can you help me out?
Thanks.
Michael

On Sat, 25 Apr 2015 09:55:05 +0000, mknuel wrote:
after upgrade to Build 10061 the start menu links and pins to classic win32 apps are not working anymore
Known issue. Posted on both the Windows blog and in the Insider app. Also,
this forum is for phone issues, not PC/tablet issues.
Paul Adare - FIM CM MVP
Everyone gives lip service to that 7 layer model but that fact is that the
only thing that has ever been truly OSI 7 layer compliant is the
Taco Bell 7 Layer Burrito. -- Kent "Dogman" Dahlgren

Allt he links in the header of any websites are not working, I reinstalled fiorefix and it s the same. No problem in others browser. the tool bar is working but not the link sinside the web page located between the top 300px height

all the links in the header of any websites are not working, the cursor is not changing into pointer and no way to click on any link located at the top of any website page. I reinstalled firefox and it s the same. No problem in others browser. the tool bar is working but not the links inside any web page located between the top 300px height.
So I can t tlog into any website, i cant write an email as the compose button is located in the top of the page.. Please help, i have all my bookmarks into my firefox...

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.

I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.e

I am also looking alternative way using inDesign to create the embed link as like as excel. is there any possible? Thanks for you reply

Links are not working...

I recently created a wedding website for my wedding videos and after I upload my site the buttons/links at the top of the page are not working... I had my site all laid out at one point and everything was fine. But using the templates I was having issues moving picture placeholders so I recreated my pages from a blank page in that template category. After I recreated my pages i uploaded my page and the buttons dont work... Any ideas? Here is the URL for my site.
www.bellsandbridesfilms.com
ANy advice would be appreciated.

Your links are working for me: Welcome/Packages/Montage/Samples/Contact. Clear your browser's cache, quit the browser and restart it and enter your URL again. If that doesn't help, post back with the specific page and link that's not working.
By the way, browsers convert spaces in page names to “%20.” To avoid these symbols, replace the spaces by an underscore when the page name or site name includes a space. For example, here:
http://www.bellsandbridesfilms.com/Bells%20and%20Brides%20Films.html
to:
http://www.bellsandbridesfilms.com/Bellsand_BridesFilms.html

The figure links are not working

The figure links are not working in the latest ADE 4.0.3. The same ePUB figure links are worked perfectly in ADE 3.0.

Your navigation is covering some of your links. You should send the image to the back & or crop it to just the red box.
How I create navigation menus:
http://jeffnitschke.com/Video.html

FF5 mailto: links are not working.

Recently I discovered that mailto: links in FF5 are not working. Haven't downloaded any new addon's. Can someone give me some help on this matter?

i had the same problem...for the dropdown menu options i had, 
i had already made firefox,thunderbird DEFAULT applications 
NO -addons
Always Ask 
__________ 
use Thunderbird (defaut) "this one had no TB icon" 
Thunderbird "this one had a TB icon" 
Use Gmail 
Yahoo 
Other 
__________ 
application details
i chose, Thunderbird, at first, still nothing, 
then i chose "use thunderbird (default)" and w/o reboot,restart of FF it worked.
my specs: 
windows 7 Ultimate 
Firefox:11 
ThunderBird 10.0.2

My links are not working

1st Q: I am new at this and just starting. However, all my hyperlinks work when I am in iweb but after publishing only half are working and the other half don't when it is live. I go back to double check if it is link wrong but again it works when not live and in iweb , but on the url it is a crap shoot. Does anyone know why?
2nd Q: why is my url so long and not just www.web.mac.com/flushdesignsas it says on iweb support, it only opens from the "visit" in iweb or with the huge url
http://web.mac.com/flushdesigns/iWeb/Flush%20designs/home.html.
maybe some one can go on it and see what I am talking about with the links the home mainly does not work.(you should be able to click on "flush designs" to bring you home
I have more issues with it but this is the worst and enough for now.
thanks

Amazing, when I turned off the font Mona Lisa, most
of the body text on some of the pages turns into my
default font Helvetica.
And having spaces in a link/url can cause a link not
to work. I've seen it happen a zillion times. Doesn't
matter if there is a %20. It will cause a broken link.
I noticed that when I looked at my site at my sisters on her Dell. Half of the words stayed as mona lisa while others changed to what looked like futura or something like that. Weird.
Now when I change the site name to one word to get rid of the %20 it wont publish. So I changed it back... but I will try again.
thanks
imac Mac OS X (10.4.7)

All the links to download DREAMWEAVER CS3 Creative Suite are not working. How can I download the file ? I have a serial number of a purchased software.

All the links to download DREAMWEAVER CS3 Creative Suite are not working. How can I download the file ? I have a serial number of a purchased software.

They work just fine. whatever issues you have are specific, but without proper system info, browser info and other details nobody can even begin to guess.
Mylenium

LInks in Flash CC after automatic transition to new scene are not working

I have a flash file containing three scenes- Scene1, Scene2 and Scene3. In Frame1 I have a loading screen animated with motion tween. I also include a function, which automatically transfer me to Scene2 after 10 sec. However after I go to Scene2 the buttons to go to Scene3 are not working. I've tried to remove Frame1 and then the buttons that are linking Scene2 and Scene3 are working, Do you have an idea where the problem might come from? Here is my code:
var loadNumber = 0; stop(); loadingPercents.text = loadNumber.toString() + "%"; /* Countdown Timer Counts down from a specified number of seconds. Instructions: 1. To change the length of the countdown, change the value 10 in the first line below to the number of seconds you want. */ var fl_SecondsToCountDown:Number = 10; var fl_CountDownTimerInstance:Timer = new Timer(1000, fl_SecondsToCountDown); fl_CountDownTimerInstance.addEventListener(TimerEvent.TIMER, fl_CountDownTimerHandler); fl_CountDownTimerInstance.start(); function fl_CountDownTimerHandler(event:TimerEvent):void { trace(fl_SecondsToCountDown + " seconds"); fl_SecondsToCountDown--; loadNumber +=10; loadingPercents.text = loadNumber.toString() + "%"; } stage.addEventListener(Event.ENTER_FRAME, fl_EnterFrameHandler); function fl_EnterFrameHandler(event:Event):void { if (loadNumber > 99) { gotoAndPlay(1,"Frame2"); } }
and for scene3:
import fl.motion.MotionEvent; stop(); BackFromPrizes.addEventListener(MouseEvent.MOUSE_UP, goBackFromScene3); function goBackFromScene3(event: MouseEvent): void { gotoAndStop(1, "Scene2"); }
Thanks

if the code you showed fails (and it's executing), you have no scene named "Scene2".
btw, "Scene2" is not the same as "Scene 2" or "scene2 or "scene 2", which would all be common typos.

Links on older Blogs are not working

Similar Messages

Maybe you are looking for