Links set in XHTML Transitional with target="_blank" are not opening in a new window. I have allowed popups and turned off ad blocker, but the links still open in the same window.
This is on a Wordpress install. Is there a Firefox setting I'm missing? Otherwise, I shall have to install a javascript plugin to do this, which seems overkill for what used to be common code.
I don't know how to delete my question, anyway I'm not having this problem anymore. In our organisation the IT department deploy Firefox updates with certain settings and limitations, in the tap-options the checkbox for opening new windows in new tabs where checked but disabled. They made some changes to make this checkbox enabled and now it works as expected if it's check new windows open i new tabs and if it's not in new windows. They never opens in the same tab as they did before.
Similar Messages
-
I have been trying to download the movie Prometheus onto my Ipad. It sticks at 793mb and hasn't moved for hours. I have 48gb of space on my i-pad and have hard resetted and turned off and switched back on, always reconnecting with wi-fi immediately. It doesn't resume?
I haven't even received an email stating I have been charged for it???
Any ideas??Well I have an update. I decided to stay as I was so far down the road. They gave me an engineer appointment of 14 of August which was totally disgusting.
I rang up to complain and was promised a call back as they tried to expediate my request. Never happened.
Whilst on these calls I also questioned the validity of sending another engineer unless they first checked that my local cabinet hard an available fibre port. I was promised and promised that they would put the notes on the call and it would not be a wasted engineer visit.
Engineer came today. Wasted visit - no ports on the cabinet.
He was not even sure why he was sent there knowing there were no ports. Talk about the blind leading the blind.
The incompetency of this corporation is absolutely astounding even when their customers are telling them they are going to fail they lie to your face just to appease you on the phone and move you on.
So I ordered my switch from sky to BT on June 6th.. and so far all I have is a phone line.
On top of this I noticed that they have charged me a late payment fee by DD and full line rental for first month. BT were so slow at installing it all that my up front line rental apparently did not cover their initialy switch over. Despite telling me I would not be charged I have been charged.
Now as a web designer I am now tempted to create basic website and use my SEO skills to push it to top of google rankings sharing with everyone of my experience of BT. -
HTC 8X Windows Phone Texting, Missed Calls, and Turn-Off Issues!
First let me say that I've had my Windows 8x phone almost since they first came out and HAVE LOVED IT UP UNTIL the last 5 to 6 months so I don't think the problems are in the hardware or have anything to do with a "paper" SIM card (although - how could I know because we can't take the COVER off!)
Anyway, about 5 - 6 months ago, I started noticing the following:
my battery life (which used to be FANTASTIC) was occasionally dying very rapidly but then would be fine again
I'm getting "No Service" in places where I SHOULD BE.
My text messages no longer go through. Once and awhile I can get them to go through and then they're locked out again. I've tried all of the tricks people have mentioned on this board - sometimes they work; sometimes they don't. Nothing is consistent. Nothing seems to REALLY fix it.
My phone is turning off even when I DO still have quite a bit of battery left.
My phone will be sitting right in front of me, will NOT ring, and I'll pick it up later only to see that I've "missed" 3 calls!
I've been quite fed up with a phone that I USED to love and I've been quite fed up with Verizon!
SOMETHING has changed in the past several months and I wish SOMEONE would tell us what it is!
I contacted Verizon over the weekend and asked what could be done since I'm not eligible to upgrade until December. Based on everything I've read on this board, I wasn't interested in getting a replacement phone of the same type and I need a phone that works. I simply wanted them to waive my upgrade constraint so I could get a reliable phone. ONE representative tried to help me but our call was mysteriously cut off! He didn't call ME back and when I tried to call back in, I wasn't able to reconnect with him. The next rep I got was the typical drone that only knew how to follow the standard script and had me take my SIM card in and out to make sure it was installed properly (GIVE ME A BREAK!) etc., etc.! Once I successfully proved that I was not a Tier 1 bloody idiot, I had the pleasure of waiting two hours to be connected to Tier 2 support. (Thankfully after being hold for about 45 minutes, the rep offered to call me back and actually did once he reached Tier 2 support). Both reps acted as if they'd NEVER HEARD of these issues before but after stating THAT, surprisingly, the Tier 2 rep, was THEN able to tell me whether customers WERE or WERE NOT satisfied after receiving replacement phones.
Anyway - it looked like my only option was to agree to a replacement phone and their scary letter about how if I return MY phone it is is deemed "damaged" that I may be charged up to $500! Well, now that I look at it, the replacement phone has the same software version on it that MINE does so HOW IS IT GOING TO BE ANY BETTER THAN MINE IS?!
I am so disgusted. Verizon can break our phones but feels absolutely NO RESPONSIBILITY to FIX them and then treats US like we're at FAULT! All I want is a phone that works! I NEED a phone that works. And with the prices we're all paying, it is certainly a REASONABLE request!Andrea -
Thank you. I do appreciate your response. I was hesitant to bother but I
did activate the replacement phone and I will admit that SO FAR (about 4
days) that it is functioning OK. I have it set to NOT do any updates. The
NEED to do that bothers me a bit but that may be the only way to "survive"
the situation. I am still having problems with spotty reception is some
locations, but at least it isn't telling me that I have no service. The
battery has been back to full functionality and I'm able to send and
receive texts again.
I'm still angry that this type of thing can happen and that Verizon makes
no concessions, but I do appreciate the replacement phone and hope that it
keeps working.
Thanks again for your response.
On Sat, Jun 21, 2014 at 8:52 AM, Verizon Wireless Customer Support < -
I've search some info about this and it seems like there's a lot of people that are annoyed by links opening in new window/tab and that the 'target="_blank"' is not valid in strict XHTML. I'm guessing this could be reasons why Firefox 5 ignores the 'target="_blank"'. But in some cases you really want to open a new widow, in my case I'm using a flash application and want to open links in new windows from there and then the ctrl-click doesn't work. When opening the link in the same page and then go back the application is reloaded and it's state is lost. Probably should try to find out if there's some other way to open links from a flash application, but I'm wondering if there's a way to make Firefox 5 open 'target="_blank"' links in new tabs.
I don't know how to delete my question, anyway I'm not having this problem anymore. In our organisation the IT department deploy Firefox updates with certain settings and limitations, in the tap-options the checkbox for opening new windows in new tabs where checked but disabled. They made some changes to make this checkbox enabled and now it works as expected if it's check new windows open i new tabs and if it's not in new windows. They never opens in the same tab as they did before.
-
Is it true that is not possible to insert in wiki pages a link to an external page with target set to "_blank" (new page)? If possible, how to do this?
adobe1kenobe066 wrote:
Site with the SWF with the link with target="_blank":
http://solarinkgraphics.com/web.htm • clicking on the IMAGE or the "ENLARGE" link should take you to a target="blank" url
Site it should go to:
http://thehoneymoonphase.com
First off that first link to the graphics site does not work. Getting a page not found error. Although I was able to do a quick lucky guess and added an "l" to the end of the address and it worked.
Second, because the link is embedded within a Flash document, your problem will lie within the ActionScript code as opposed to the HTML. Thus you would be better off posting this in the Flash forum with your ActionScript code to get better troubleshooting responses.
http://forums.adobe.com/community/flash -
Url link with target="_blank" hangs in Internet Explorer 7 BUT works fine in IE6, FF, Safari?
Okay, so I have a SWF embedded on a page, which has a link to a target="_blank" url, and it works in every other browser, INCLUDING the notorious ie6, but NOT in IE7?
IE7 just opens a blank page (without the address in the address field) and displays 'connecting...' and stays there forever.
• I even manually typed in the adress of the site I'm trying to access with the link, and the page opened just fine in IE7.
But when I click on the link from the SWF, it hangs again and doesn't open. I manually typed in both addresses with and without the 'www' (i.e. http://somewebsite.com and http://www.somewebsite.com) and both opened in IE7.
But the link from the SWF ONLY opens a blank page with the 'connecting...' and stays there forever.
• I feel like it was working previously, but I could be wrong. Besides that, it is working in ie6, of all things. So I don't get it?
• This also happens with other website that have a link with target="_blank" in IE7, so it's not only my site.
As always any leads are greatly appreciated.
Site with the SWF with the link with target="_blank":
http://solarinkgraphics.com/web.htm • clicking on the IMAGE or the "ENLARGE" link should take you to a target="blank" url
Site it should go to:
http://thehoneymoonphase.comadobe1kenobe066 wrote:
Site with the SWF with the link with target="_blank":
http://solarinkgraphics.com/web.htm • clicking on the IMAGE or the "ENLARGE" link should take you to a target="blank" url
Site it should go to:
http://thehoneymoonphase.com
First off that first link to the graphics site does not work. Getting a page not found error. Although I was able to do a quick lucky guess and added an "l" to the end of the address and it worked.
Second, because the link is embedded within a Flash document, your problem will lie within the ActionScript code as opposed to the HTML. Thus you would be better off posting this in the Flash forum with your ActionScript code to get better troubleshooting responses.
http://forums.adobe.com/community/flash -
Most of my my target audience are not familiar with iTunes, so I am trying to figure out how to explain how to rate it. Is this the shortest way? “Open iTunes on your computer, click on iTunes Store and search for my podcast. You’ll see it at the top of the results. When you click on it, you’ll see “Write a Review” and will be able to submit your comments and ratings.” Right now they find my podcast because they are on my mailing list, not through iTunes. It would be easy if I could just say, "Go to iTunes.com" or "Go to my web site" - but there are sooooo many steps! Help! Thank you,
MilanaThere is another trick - if you give them this URL:
itpc://feeds.feedburner.com/RecurringRevenueRevolutionPodcast
(note itpc not http)
it will subscribe them directly to your feed in iTunes, but it does depend on their having iTunes installed (and in Windows set as the application to use with 'itpc'), otherwise they will get an error message, so it's a slightly double-edged weapon. You could them the link and say 'subscribe in iTunes' as an alternative to the iTunes Store page. -
Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.
Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.
Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a nItunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell, windows 7 ultimate, no virus or firewall programs installed.
This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013 -
When I try to download them from the Waterstones website I get a message saying:
‘Some file types associated with EPUB files are not associated with Reader Library. Do you want to associate them now? When I reply yes I get another message; ‘Configuration error unable to update EPUB files check network firewall and try again’.
The ‘books’ are saved in the Download directory and I can’t transfer them from there to my E-Reader. I have not had any problems before, it was very simple; I saved the download and it automatically went into the Reader Library.
I contacted HP and they said it is a software error and suggested I contact Waterstones. I contacted Waterstones Customer Support and got the following response:
As the error message is specifically mentioning the firewall it does sound like something in the firewall settings is stopping the download from taking place correctly. However, the files should not be being saved to the Download folder. It would be worth trying again by going to your Digital Order History on your Waterstones.com account and pressing the download button, and then making sure to press "Open" not "Save". When you press Open rather than Save it should give the option to open the file with Adobe Digital Editions. If the firewall message still comes up then I'm afraid something is blocking it on your end.
If the above "Open" download method works but you then still get an error message it could possibly be that you have accidentally created a new Adobe ID when setting up on the new computer, rather than signing in with your old Adobe ID. It would be worth trying the aforementioned download technique again first, but if problems did still persist it would be worth calling Adobe themselves on 0207 365 0735, as they should be able to sort out any account issue.
In response to the first para of Waterstones email I already do what they suggest I do press ‘Open’ not ‘Save’ but I don’t get the open with Adobe Digital Editions (we have installed Adobe Digital Editions on the new computer. Waterstones say we may have ‘accidentally created a new Adobe ID when setting up the new computer’ does that mean that we shouldn’t have installed Adobe Digital Editions on the new computer as it would have already been there? How do I sign in with my old Adobe ID?Hi all after attampting to get some supoport from adobe by phone.... nice people infurating policys as far as support for digital editions or DRM is conserned... However I got no where with support.
I ended up instaling Digital editions on my desktop PC and going through the motions of registering and borrowing a book then returning it. Then I trying on my iPad, Bluefire worked, Over drive did not so I completely removed Overdrive and reinstalled and re registered. all working now.
Maybe some one at adobe did something. Maybe the install of the adobe DE client on a PC corrected what ever was out of wack with my account. Mayby the server that my account lives on did a scan disk and corrected a bad clustrer.
What ever happend My account is actiove and working again. hope this helps others. -
I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respondGenieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller! -
I have finally taken the step of updating my iPhone 4S to iOS8 after learning the hard way last update to wait for the bugs to be worked out. I was horrified to find that the battery was being sucked dry in no time at all. After finding a great article posted elsewhere on the apple forums, I went through and turned off all unnecessary options involving the use of cell data, location services and background refreshing. My battery life has thankfully returned to what it was before the update.
HOWEVER, now, every time I open an app for which I turned these things off, the window informing me of that pops up. I am getting really irritated by this as I made all of these decisions deliberately and am well aware that I may need to go back and change them in order to activate certain capabilities when I want to use them. I had done the same thing with the last iOS, but there were far fewer that needed to be turned off and the battery life seemed to be less affected by those that I left on so it was not the annoyance it has become now.
Is there any way to make the phone stop presenting me with these idiot messages? TIASorry no, there isn't a way to turn off those reminders.
You can send Apple a feedback here http://www.apple.com/feedback/ -
Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
thank you for your help.Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
i've lost my iphone with passcode lock and find my iphone lock on but the wifi n cellular data was turned off so no way i can trace it so the only question remains is will the person who finds it be able to unlock it and use it as his own ?
is it possible to change imei number?
i've tried for so many times n still the phone is offline so i've set it to offline mode with my message but it never shows the last location why?If the device is found, nobody can use it without knowing your Apple ID and password.
The phone will only show it's location if it is connected to cellular network or Wi-Fi. If those options are switched off, you can't locate the phone.
With iOS 7, Find My iPhone includes a new feature called Activation Lock, which is designed to prevent anyone else from using your iPhone, iPad, or iPod touch if you ever lose it. It starts working the moment you turn on Find My iPhone in iOS 7. With Activation Lock, your Apple ID and password will be required before anyone can:
Turn off Find My iPhone on your device
Erase your device
Reactivate and use your device
This can help you keep your device secure, even if it is in the wrong hands, and can improve your chances of recovering it. Even if you erase your device remotely, Activation Lock can continue to deter anyone from reactivating your device without your permission. All you need to do is keep Find My iPhone turned on, andremember your Apple ID and password.
What steps should I take if I misplace my device?
If you ever misplace your device—whether it’s just lost or you think it may have been stolen—you should put it into Lost Mode immediately using Find My iPhone.
Lost Mode locks your screen with a four-digit passcode and lets you display a custom message with your phone number to help you get it back. You can also remotely erase your device if needed, and your custom message will continue to display even after the device is erased.
While Activation Lock works in the background to make it more difficult for someone to use or sell your missing device, Lost Mode clearly indicates to anyone who finds your device that it still belongs to you and can’t be reactivated without your password.
To put a device into Lost Mode, sign in to icloud.com/find from a Mac or PC or use the Find My iPhone iOS app.
For more information, read what to do if your device is lost or stolen.
copied from iCloud: Find My iPhone Activation Lock in iOS 7
Maybe you are looking for
-
Problem to install Oracle 9i on Redhat 7.1
Does anyone has succes to install 9i database on RedHat 7.1 ? My installation failed in LINK (ins_sqlplus.mk)
-
Installing OIM 11g on windows XP
I am a complete newbie to OIM. Is there a document available for installing OIM 11g on windows XP? Also can we use sunone directory server as the LDAP server with OIM? -Arnold
-
Problem with a recent purchase, message appears when I try to install any app
Help!
-
Secure Application Roles in SE.
I'm looking for ideas to implement or replicate the behavior of "Secure Application Roles" feature of EE in SE. Any help/sample are welcome! Thanks, Diego.
-
Pinch zoom not working in firefox
Both pinch to zoom and double tap to zoom work fine for me so long as I am viewing web pages in Safari. But I can't seem to use those gestures in Firefox. Has anyone else had this problem and is there a way to make thse gestures work in FF or are the