Links stopped working

Can someone look at these links and see why they might have
stopped
working?
http://righttax.org/pdf.html
There are three buttons in the middle of the page which were
working. I
was surprised to see that they have stopped. The files are
all on the
site, the links work locally and they load if I access them
directly:
http://righttax.org/pdfs/nk06.07web.xls.pdf
(takes a long time to
load, sorry)
I'm stumped and would really appreciate any help.
Thanks

Harvey Waxman posted in macromedia.dreamweaver
> Can someone look at these pages and see why one works
and one
> doesn't? The three button links are identical
>>
>>
http://righttax.org/pdf.html
>>
http://righttax.org/pdftest.html
You are using form submit buttons without using the
<form> element.
>>
http://righttax.org/pdf.html
With JavaScript off, the buttons do nothing at all. With JS
on, I get
all three files. As you mentioned, they are very slow
loading. I
recommend using a simple text link that includes the file
sizes.
Something like:
<a href="pdfs/NK06.07web.xls.pdf">N. Kingstown 06/07
data</a> (3.7 MB)
You can dress that up with CSS if you want it to have a
different look
than your other links.
This has the added benefit in that users can right-click and
Save As or
choose to open in a new window/tab (if their browser is set
to load PDF
files in the browser).
>>
http://righttax.org/pdftest.html
The submit buttons don't work even with JS turned on. The
reason is
that there is no MM_openBrWindow() function available. That
function is
typically inserted into the head section when you create such
a link.
If you did this in a different file, look for the JavaScript
in the
head section of that file.
My recommendation for text links applies here, too.
Side note: If you're recommending Adobe Acrobat (Adobe
Reader), I
recommend linking to Adobe's reader.
http://www.adobe.com/products/acrobat/readstep2.html
Otherwise, you might want to recommend PDF Reader/Writer
since that's
where you're linking.
Mark A. Boyd
Keep-On-Learnin' :)

Similar Messages

  • Embedded Flash video makes links stop working

    I have a strange problem.
    I embedded a flash FLV video file into Dreamweaver site and I
    published it.
    All the links in my site works fine as long as I do not look
    at the video page more than twice.
    If I keep going back to look at the video page, some of the
    links stop working.
    Does anybody experienced this?
    I made my website with Frontpage before and I embedded a WMV
    video file to my page but I never had this problems.
    This give me such a headache because if this keep happening,
    I can,t make websites for my client.
    Please somebody help me.
    If you have to look at my site, my site is
    http://www.1000arts.co.uk/theartoftaichi
    and the video page is under the Classes drop down menu.
    Thank you very much in advance.

    Hi all
    For those of your that may of experienced the same issue Cisco have a known bug for it which is fixed in version 5.3.
    I will upgrade our version from 5.2.2 to 5.3 and let you know how it goes.
    CSCth09724 - Video embed code doesn't work till auto-play is set to true for video
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCth09724
    As per the TAC engineers notes “Disregard the found-in/fixed-in notes. The bug was in 5.2.1 and I have confirmed that it is fixed in 5.2.3”
    The hardware support notice for 5.2.3 is located below, so it’s worth checking the hardware version to ensure it’s compatible. If the server is not in the hardware list below, this means it will support 5.2.3.
    Server Appliance
    End   of Sale Date
    Last   Date of Support
    DMS   Support
    MCS   7825-H2
    30-November-2008
    30-November-2011
    Up   to v.5.2.2.x
    MCS   7825-H3
    13-March-2009
    13-March-2012
    Up   to v.5.2.2.x
    MCS   7835-H1
    13-September-2007
    13-September-2010
    Up   to v.5.2.2.x
    MCS   7835-H2
    13-March-2009
    13-March-2012
    Up   to v.5.2.2.x

  • After Updating to Flash Player 9 Links stopped working

    After I updated my flash plugin to 9 some of my flash links
    stopped working. Our site uses CMS to upload the flash files. I
    built them using actionscript 2. It's not all of the Swf that were
    affected just some of them, but they were all built the same. On
    release, get URL script. I tried it on a mac and a pc and neither
    worked in firefox, safari, IE, or opera. I did a uninstall and
    installed flash player 8, and everything works again. Its pretty
    random anybody have any ideas?
    Heres the page that does'nt work, but just the pant and
    jacket links, not the ones in the header at the top.
    http://www.sessions.com/snow.php?sid=3&gtype=M

    It's just a regular link.
    on (release) {
    getURL("
    http://www.sessions.com/thumbs.php?psid=204&sid=2&gtype=W",
    "_self");
    I didn' t build the site could it be something in the
    php?

  • Bookmark links stop working after security applied - v7.1.0

    System:
    Windows XP SP2
    Office 2007 SP1
    Acrobat Pro 7.1.0
    In Word 2007, I created a top menu of links that use bookmarks to jump down the page to various topics. When I Save As to PDF, the created PDF top menu links work. When I secure the PDF with a password, the top menu links stop working. However, Web links continue to work. What is causing the top menu links to stop working?

    >The links are in the document, not the Bookmark panel.
    Ok, that's fine. They are form fields, almost certainly.
    > How does one allow form filling for a document that is not a form?
    Actually, if the links are form fields, it really is a form. But that
    doesn't matter.
    You just have to set Changes allowed: filling in form fields and
    signing existing signature fields in the Permissions box.
    Aandi Inston

  • Links stop working

    I created a link in a PDF to open a file and it worked just fine. Now after several Adobe updates they stopped working both using Acrobat 8 Pro and Reader 9. I checked the link and in the link it points to the correct location of the file on the hard drive or DVD drive but Windows says it can not find the file.
    The message that appears is "Windows cannot find '01_01_welcome.mov'. Make sure you typed the name correctly, and then try again." the next message comes from Adobe Acrobat "Could not open the file ''01 Introduction/01_01_welcome.mov'.
    I checked the properties of the link and in Actions it is listed as Open a file, File:D:\Quickbooks Pro Training\01 Introduction\01_01_Welcome.mov
    On my laptop I uninstalled Reader 9.3.4 and installed Reader 8.1.2 and the links worked. I then uninstalled Reader 8.1.2 and re-installed Reader 9.3.4 and they stopped working.
    Any suggestions to help me fix this issue?
    Thanks

    This bug has been reported by others and appears to have been introduced with 9.3.4. I have not heard of any fixes, you you may have to wait for a future update from Adobe.

  • Behringer UCG102 Guitar Link stop working after upgrade to Lion

    Hi,
    I  have a Behringer UCG102 Guitar Link that worked in the past (using Mac OS X Snow Leopard without any special driver, before upgrading to Mac OS X Lion) without any problem but now has stopped working. The device is working properly on Windows computers. Also I recently bougth a Behringer Xenyx  2442USB mixer and tested on a windows computer and it works perfectly. So I think it is not a problem with my mixer hardware neither my guitar link unit.
    But when I try to use it any of them on my Apple MacBook Pro running Mac OS X Lion (10.7.3) they do not work. I can reproduce sounds coming from my computer to the mixer, but I'm not able to record nothing. I've followed the indications. In the Audio/Midi settings application I select USB Audio Codec as default Input and output device. I did the same on the "System Preferences -> Sounds".
    Also in any recording application tested (Audacity, GarageBand, EnergyXT2.5) I selected again as input source the one labeled as "USB Audio Codec", but no sound is recorded.
    I've noticed that in "System Preferences -> Sounds" in the input section, when I select "USB Audio CODEC" as device for sound input, it is not possible to change the settings for that device (it shows "The selected device has no input controls" and the Input level bar is completely at left. If I select the integrated microphone I'm able to select the input level and the bar shows the sounds the microphone record.
    Something similar happens with the Audio MIDI Setup application where in the input section of the USB Audio CODEC all the level controls (Master, 1, 2) are disabled and grayed
    It is clearly a problem in the driver in the latest version of the operating systems, and it seems this bug have been already reported by many people. Does Apple have any plan to solve that issue?

    If you can put a step by step tutorial with pictures I would greatly appreciate, because i could not make the UCG 102 work and I used it a lot on my other computer with windows to use Impulses to simulate cabs, so if you can do it I would love it !!! Sorry for my bad english

  • Dynaic Link stopped working in  new installation

    Hi,
    I just installed the 64 bit CS5 on a brand new Windows 7 64bit HP PC with plenty of performance power (Windows Experience Index 5.9).  Anyway, during the very first use, as soon as I started working, I got the "Dynamic Link has stopped working" error.  Why would this happen on a new computer and new installation?  Is it something to worry about or that will casue a loss of unctionaltiy?
    Thank you,
    Mike

    I deleted your other post.
    I also made a change so that your problem.jpg shows on this page.

  • HELPPP Blackberry link stopped working

    Hey Everyone!!!
    Am on a dead end. Have made several attempts to uninstall and install again blackeberry link nothing seems to work. As soon as click to load the program so that i can back up or sync my Z10, I keep gettin an error message "Blackberry Link has stopped working".
    I havent done a back up for a while and need to do asap.
    Everything was working perfectly up to a month ago. Been trying to find a solution for weeks now.
    PLease help. Sucks sucks

    Hello Zjaydee
    Welcome to http://supportforums.blackberry.com/
    I recommend you download the latest version of BlackBerry Link
    Check you have installed on your PC, Net Framework 4 or higher.
    Regards...
    BBM Channels  PIN: C0007093A
    Do not forget to give LIKE    Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
    BlackBerry Protect and  BlackBerry Link constantly.  #ichooseBlackBerry10 Gutijose14 Forums Veteran I

  • Flash 8 Links Stop Working!

    I've gone through the forums here and elsewhere but found no solution. I apologize if I've over-looking something.
    I use Flash 8.
    I'm making this very simple Nav Box where on certain links open in a new window/tab. Those links work great.
    But most of the links are set to open in the same window that the Nav Box is on. When saving the SWF and HTML, the links work great.
    The problem comes when I place it on other pages/sites. The "Self" links never work. Here are samples.
    This is the HTML exported via Flash8
    http://ex3communications.com/Samples/NetLinks.html
    Here are two different test pages consisting the SAMEswf file (loaded to the page correctly).
    http://midgeorgiafellowship.net/index4.html
    http://www.dovm.org/DOVM_AVP-NewLayout.html
    Neither page nor link in the Nav Box requires a Iframe nor anything "special" to work.
    Here are to version of the AS2 code I've tried (Using the Day Of Victory Ministries link as a sample)
    #1
    on (release) {
    getURL("http://www.dovm.org/DOVM_AVP.html");
    #2
    on (release) {
    getURL("http://www.dovm.org/DOVM_AVP.html","_self");
    ========================================================
    MINOR UPDATE
    ========================================================
    The file still doesn't work. But I uploaded it to another section of the server (not sure why I did that) and it worked.
    BUT, there's a catch. It only works on pages that are ON THAT SERVER.
    I've tried it on 2 different servers (Aa & Bb) with the same results.
    Anyone know what might be causing this? Both directories are public.
    Even trying to add the Flash to a page through a embedding code yields the same results.
    Examples:
    Flash is place on server Aa & the page that holds it is on server Bb, then the links don't work (and vis-versa).
    But Placing the both the Flash and the page that holds it on the same server ends in success.
    Unless I'm mistaken, the way flash works, it matters not which server it is on so long as it's directory is public. This enables the flash to be placed on any page (via it's root link / Embedding code) and still have it's buttons work. Especially if the button's links are full "http:// www.  Website  .com" address as I've used here.
    What am I missing?
    Thanks in advance
    Message was edited by: SEspider Included small update

    THANK YOU!!
    I had literally spent all day Tuesday trying to solve this simple issue with no success.
    It now works.
    Thank you so much!

  • Safari 5.1.2 links stop working

    While working in a Internet site I will click on a link and Safari does not respond, no errors, no nothing. I have Firefox and Opera on my MacBook Pro and they also fail in the same manner. I have checked that all software is up to date, clear the cache and use reset in Safari repair permissions and so on.
    Now if I try the same websites that are failing to respond on my Mac on a Windows 7 laptop running IE8 it works as it should, no problems. I have also seen Safari fail when trying to login into an Internet site, input my username and password click enter and nothing...
    MacBook Pro (late 2008) 2.4Mgh, 8GB of ram, 500GB hard drive running MAC OS X 10.7.2 and Safari 5.1.2

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is localized to your user account, or is system-wide. Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select “Help” from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Any application you run will behave as if you were running it for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    As Guest, launch Safari and test. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.

  • My tabs and links stopped working. It was fine one night, and the next day nothing worked right.

    One night Firefox was working perfectly. The next day (I didn't make any changes) my tabs and links didn't work. What could be wrong?

    Have you tried plugging the iPod into a different USB port or using a different USB cable to see if that makes a difference?
    B-rock

  • Reminder email links stop working

    Creating a Reminder from an e-mail by dragging from Mail to the Reminder App works fine but often, when I go back to the reminder and click on the link 'Show in Mail', I get an error message saying 'Mail was unable to open the URL “message:%[email protected]%3E”. '
    The messages have not been moved from their original location but they are on an Exchange account.
    Can anyone explain why this is happening please, and how to remedy it!!
    Peter H

    I also have the same problem.
    URLs created by dragging a mail message (whether to iCal or elsewhere, or by extracting the URL from the iCal message) don't work and fail as above.
    As above, this is on my MS Exchange email and only happens with the sent items, not inbox items...
    Any thoughts? Thanks in advance...
    David.

  • IWeb 08, Publish Videos, Navigation Bar link stops working.  Why?

    In iWeb, I am building a site with that includes two movie pages, each has a video (QT H.264, 640x280, medium quality). One movie per page. When I publish to a folder, I test both with Safari and Firefox. Each displays the same problem. When I click on the navigation bar link and go to the first video, the navigation bar ceases to work after I'm on the movie page. I can play the video, but I have to browser back because the navigation bar doesn't highlight, rollover, or anything. Both browsers exhibit this. Thanks.

    Make sure you don't have any other objects overlapping the navbar.
    OT

  • Bank links stopped working after 5.1.4 Update

    I use Safari to download my banking information.  After the last Safari upgrade (5.1.4) I can log on but cannot open links to the different accounts.  I can "exit" but cannot navigate deeper into the site.
    Using early 2008 MacBook Pro 15 with Lion.  It won't work using my iMac but will work using Internet Explorer on a PC.

    HI ..
    Try deleting the cache.db associated with Safari.
    Quit Safari.
    Go to    ~/Library/Caches/com.apple.Safari/Cache.db. Move the Cache.db file to the Trash.
    Relaunch Safari to test.
    If that didn't help, install the Java for OS X Lion Update 1
    Then restart your Mac. Try Safari again ..
    ~ (Tilde) character represents the Home folder.
    For Lion v10.7x:  To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library
    edited by:  cs

  • When i export my muse website my youtube video links stop working. Why is this?

    I'd like to fix this

    You can use Muse's publish feature to publish your site to a temporary Adobe BusinessCatalyst site, then you can assign the URL to that site.
    You can also purchase hosting from a 3rd party web hosting provider, and use FTP upload to upload your muse site to that location.
    Here are some videos & tutorials explaining the process:
    http://tv.adobe.com/watch/muse-feature-tour/muse-choose-your-hosting-provider/
    http://helpx.adobe.com/muse/tutorials/upgrading-launching-your-muse-site.html
    http://www.adobekb.com

Maybe you are looking for