Links take more than one click (at least two) to open

I'm experiencing a very strange problem with FF where I have to click links more than once (at least twice) to open them (e.g in Google search results).
I have tried starting in safe mode to check whether it was a bad addon. That didn't work.
I tried nuking my install, removing all the traces, running a registry clean, then reinstalling without any addons. Didn't work.
I'm at a loss as to what could possibly be causing this. Very frustrating and I haven't found any solutions by searching though it seems a lot of other people have had this problem.
Anyone have any ideas..?

Also this doesn't happen with Google Chrome.

Similar Messages

  • Why is all my icloud account linked with more than one apple id?

    why is my iphone 5 merged with more than one account?

    What do you mean by "merged with more than one account" and "linked with more than one Apple ID"?  What exactly are you seeing on your phone?

  • How to make an indicator takes more than one input

    Hello,
    I want to know how to make an indicator ( like gauge for example) response to more than one case strrcuture result. In other words, how the indicator can take more than one input and move based on different input values ( the arrow of the gauge moves to different angles basesed on the logic structure and not only to one degree).
    Thanks in advance,
     

    YES, you got it right Coastal !
    This is what i want to do,
    I dont know how to establish this output in the software, i am still learning LabVIEW.
    I put a merge block to join the outputs but it didnt work.
    check it in the attached VI file.
    I am sure it is an easy thing but I dont know how to implement it.
    Any help you provide is appreciated,
    Best wishes 

  • Every time I login, I have to select Country. It takes more than one attempt to select one.

    Every time I login, I have to select Country. It takes more than one attempt to select one. What could be done to save it so I don't have to select it repeatedly?

    Is this PSE 12? You should not be logging out. In PSE 12 log in = activate. When you log out you are deactivating PSE. Just leave it logged in.

  • Light Switch 2011 "C#" How to allow filter which take more than one entry to take * and show all other entries?

    Dear All,
    I have created the following code which extended my filter functionality and allowed a to take more than one entry (Comma have to be inserted after
    each entry). 
    For example:
    "Country Filter" can take ----> Germany,Egypt,Holand<o:p></o:p>
    "City Filter " can take ---------> Berlin,Münster
    if (Country_PAR != null)
    String[] Country_Array = Country_PAR.Split(new Char[] { ','});
    query = from p in query where Country_Array.Contains(p.Hotel_Country) select p;
    if (City_PAR != null)
    String[] City_Array = City_PAR.Split(new Char[] {','});
    query = from p in query where City_Array.Contains(p.Hotel_City) select p;
    Now want to extend it more and say something like:
    If  * is included ---- > Give me all entries        
         ex. Ge*     This will give me everything which starts with Ge
    If <> is entred -----> Give me entries which are not equal to a certain entry
         ex. Country Filter = <> Germany          give me all other entries except Germany
    Thanks alot,
    Zayed

    Thanks your reply. I mean no one know my feeling. except if the new car is your. If Geek Squad can't install it. Just let me know and go. right? I ask many time? Are you ok to finish? He said yes. First time fail after 5 hours long wait and tow my car to Toyota repair. Second time said only take 20 to 30 minutes to program the key. but fail again after about 4 hours 30 minutes long wait and head light is not automatic turn on at night. I have to take a day off drive to Toyota repair. My time is money. wait there more than 10 hours and done nothing. 5 days no car and take the subway Bus and long walk. How do I feel? I m the customer. if without the customer. How you get pay? Geek Squad use my remote start and alarm and I can't return it. I loss time and money. My new car has a repair record. That is what Bestbuy want to do for the customer. Geek Squad work for Bestbuy. right? You are not just loss one customer. You will loss more and more than the remote start alarm cost. Bestbuy will not know? How come just 200$ remote start alarm and the 50$ module. Bestbuy don't want to reimburse. I m not tell you to pay me 5 days for rental car. why don't just want a happy ending? Bestbuy is big company. I m very small. 250$ it cost Bestbuy nothing. You can't let the customer loss money because you. right?

  • Can a position be linked to more than one org unit by A012 relation in SRM?

    Hi All,
    In the HR Org structure in ECC, a position (S) can have more than one A012 relation with different organization units (O).
    For example:
    S 123 has a A012 relation with Org unit A; validity date: 04/04/2006 to 12/31/9999
    S 123 has a A012 relation with Org unit B; validity date: 06/01/2006 to 12/31/9999
    org unit B falls under Org unit A in the Org unit hierarchy structure.
    But, in SRM I find that only one relation A012 linking S to O can be maintained, which is:
    S 123 has a A012 relation with Org unit B; validity date: 06/01/2006 to 12/31/9999
    I tried passing the data again through PFAL transaction (update mode), but the data in SRM does not change.
    Is this standard behaviour? Can't a person manage more than one org unit in SRM?
    I am currently working on SRM 5.0 with ECC 6.0 as backend.
    Regards,
    Ancy

    Hi,
    This functionality only relates to users who are professional
    purchasers. It means that they can be responsible for more than one
    purchasing group. In past releases, they were responsible for the
    purchasing group that they hung from in the org structure. Since some
    customers wanted that they could be responsible for more than one
    purchasing group, but the system would not allow the purchaser to belong
    to more than one org unit. Hence they introduced the new functionality
    that I described above. However it is not technically possible for a
    user to belong to more than one org unit since this would lead to
    inconsistencies in the way that the attributes work.
    I hope this helps.
    Kind Regards,
    Edel.

  • Link to more than one Mac?

    Can I link my ATV to more than one Mac?  We have two in the house.  It would be handy to link both, rather than deleting one and setting up with the other.

    If they are using different home sharing ID's then you can only do one at a time. However, multiple Macs can be used when using the same ID.

  • More than one library (on the same computer) open?

    In the new iTunes 9 it is possible to access several libraries on my home network from the open iTunes window, which is really cool. I wondered if this means it may now be possible to have access to several libraries on the same computer (or connected drives) at the same time. I use 3 different libraries on my work PC and my mac at home and the process of shutting down iTunes, holding down shift/option, reopening itunes, selecting library is rather cumbersome. Having each of the libraries accessible the same way they are for other libraries on the network would be really useful.
    Is it possible?

    pajagsfan wrote:
    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)
    I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library.  See if the files are elsewhere on your hard drive, or in the Recycle Bin.  When you find them, get them back into your own library.  Now you are ready to help your wife.
    As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly.  It is better to set her up with her own Windows user account. She can have her own iTunes library there.
    Get a copy of your entire iTunes folder to start her off.  She can delete stuff she doesn't want without messing you up.

  • Why does it need more than one click to follow a link on my friend's laptop?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/824689]</blockquote><br>
    I sometimes uses my friend's laptop when in room.
    but when I use the laptop, I always have to click numerous times before it follows the clicked link.
    On facebook, google, yahoo.. just everything as long as it is a web page.
    But it does not happened when I use my pc in the office. so it must be the laptop..
    any setting needed? I tried to reinstall FF 3.6.15 and windows xp professional sp.2 but nothing solve the problem.
    Like following the email confirmation link from this forum as I register, I need to open and close new tab more than 7x before it says 'email confirmed'.
    Please help...

    It isn't, something has gone awry. Hold the power button for about 10 seconds to perform a forced shutdown. Then restart as normal. When you turn to the System Preferences, Users and Groups tab you will probably find that the account was deleted. But it may not be. If you chose the option to delete the user's folder, make sure that it is indeed deleted. It will probably be a good idea to start in recovery mode - restart holding the command R key - and use Disk Utility to repair the hard drive, just in case.

  • Why do I have to use more than one click to bring objects in - Keynote?

    I have built a number of presentations and when I play some of them back, I have to click the mouse more than once to move an object in.  Any one help me as it would be easier just to click once.  Thanks

    Check to see if the animations are set to start "on click: and there  is not a delay set.
    What animation is used on the objects that need two clicks?

  • Why does printing a pdf take more than one hour?

    Printing a single page from a pdf document (simple text) takes well over one hour. Surely, this can't be normal. Is this a known bug or is something wrong with my setup? Is there a solution/workaround?
    Mac OS X 10.7.3, Canon MP550 printer.

    jmsuijkerbuijk wrote:
    The size of the document is 15.3 MB. I only needed to print one single page from that document, which took me about 70 minutes.
    For the record it is possible to have a large text-based PDF. What can increase the file size is the presence of images in the document. I have a training document I created in Word with lots of screen grabs that is 17MB. After converting it to PDF using Acrobat Pro the resulting PDF is 9.6MB. I also have a Snow Leopard manual - one of the David Pogue missing manuals - that is 15.2MB. So a large PDF file does not automatically mean it is image-based as has been suggested. And even if it was image-based file, which is usually TIFF encoded for b&w and JPEG encoded for colour documents, a single page of that document should not take that long to print.
    With the document open in Acrobat you can select File > Properties and under the Description section you will see what application created the document and under the Advanced section you will see what application was used to create the PDF. This will give you some insight into the type of document you have. But if you did not create this PDF then there is not much you can do anyway.
    If the same single page prints fine using Preview, then there could be a print setting in Acrobat that is causing the long delay. One setting is located in the Advanced print dialog menu. With the print dialog window open, you will see the Advanced button (outlined in red).
    With the Advanced setting window displayed you will see the setting "Print as Image". Having this enabled can dramatically increase the file size of the document to be printed.

  • Linking to more than one point in a PDF from a browser

    Hi guys, i have been tasked with creating a website to house a few pdf's. I have set this up so that you click a link in the navigation and it displays the pdf in a frame on the right side of the page and goes directly to the page i specify. The problem comes when i try to click a link directed into the same pdf on a different page, it doesnt go to the page once the pdf has been opened by the first link and just stays where it is in the pdf. Does anybody know of a way to reload the pdf upon clicking the hyperlink? I have tried turning off caching in meta tags but this has made no difference. I am using Internet Explorer 8.
    Thanks in advance,
    Simon Ineson

    Does nobody know of a way to get this to work? It seems to be leaving my pdf open in the background even when i click off it and put something else in the main section of my frame and come back to it. Seems a little odd to me that i have no control over the pdf from the HTML once it has been opened.

  • Login Using tns entry takes more than one minute

    Hi all,
    I have created one 11g R2 database. I am trying to login to the instance and it works fine when I login using just the username and password. But when I try to login using tns entry its taking too much time to login. Also when I try to connect from a remote machine using Toad or any other client its getting timed out or takes too much time to login. Once I get connected everything works fine.
    The Database is installed on Rehat Enterprise Linux Server relase 5.3
    Regards
    Navas

    Hi,
    The output of tnsping is pasted below.
    tnsping IDMREPO
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 06-OCT-2010 12:37:53
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /home/orarepo/app/orarepo/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.5)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = IDMREPO)))
    OK (0 msec)
    Regards
    Navas

  • Can't take more than one picture through Messages

    I've had this problem since I first received my iPhone 6 and I always thought it just needed a software update, but I'm beginning to think that even that can't help. Basically when I try to choose the 'Take photo or video' option when sending a picture through Messages, I end up with a black screen (not entirely a black screen, but where I should be viewing the photo/video that I'm about to take). I'm only able to use that option once throughout the whole day and then if I try it again some other time all I end up with is a black screen or like today, an image of the last picture I took using that feature. I've tried resetting and rebooting my phone but to no avail. Two other people in my household are also iPhone 6 users and they don't seem to have a problem with this feature. So, not really sure if anyone else has had this problem or it's just me. I wanted to consult someone here first before taking it to the Apple Store to have them take a look at it.

    Something definitely wrong.
    There's probably another fix but what I'd do is re-fresh Aperture, and that's easy to do.
    Hold down the Alt+Apple keys while turning on Aperture and follow the prompts.

  • ATV can it be linked to more than one computer.

    I am using a iMac 2008 and a MacBook unibody 2009 with sharing in iTunes. Can I set up ATV on both computers? If I can How is it done?

    You can set up one mac as a primary library and the other as a secondary library.
    See This
    (Please excuse my unsupported nomenclature)

Maybe you are looking for