Links to discussion in a discussion board does not work from a Custom View

Hi,
I need to limit the number of Items shown in a discussion board the the 3 latest discussions.
The solution to do this is to created a new few where I set the item limit.
.. or so I thought.
The view shows only the 3 newest items however the link to the discussions are not working. If I change the view back to the normal "Subject/AllItems.aspx" view it works fine. 
Anyone has a solution for this? hovering over the title link with the mouse I can verify that the links are different.
With the standard subject view where it works:
Home.aspx?RootFolder=%2Fsites%2Ftestsite%2FLists%2Ftest%20discussion%20board%2Ftest%203%202820&FolderCTID=0x012002000DF957D933C11F498845E0406B80727A&View=%7BF54786F4%2D10EB%2D4DB1%2DA686%2D7743DD17635A%7D
With my custom view where nothing happens when I click the link:
Home.aspx?RootFolder=&FolderCTID=&View=%7BF54786F4%2D10EB%2D4DB1%2DA686%2D7743DD17635A%7D
Thank you

check this post
http://social.technet.microsoft.com/Forums/sharepoint/en-US/9fc02732-3124-4c41-b7ce-ae26f6c3c00d/how-to-limit-the-discussion-board-webpart-to-show-only-10-discussions?forum=sharepointgenerallegacy
Another article
http://technet.microsoft.com/en-us/library/cc768269.aspx

Similar Messages

  • Why does right clinking on link and selecting open in new tab does not work?

    Why does right clinking on link and selecting open in new tab does not work?
    It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • In 5s, personal hot spot does not work from time to time. Not detected

    In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.  

    Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
    also avoid special characters making a password. hashtags or open brackets for example doesn't work too good.

  • Right click on a link and selecting "open in new window" does not work. How do I gewt this feature to work? PS Right click on a link and selecting open in new tab does.

    No matter where the link is - in an e-mail or on a web page - the "Open in new window" feature does not work. Very annoying. Also I close Firefox in a session, but then cannot re-open it. When I shut my PC down I get a prompt to End Task -[ Firefox ] and a window opens asking if I want to save tabs and quit; quit; or cancel. After closing Firefox it does not show as an application running in Task Manager
    == This happened ==
    Every time Firefox opened
    == I recently re-installed Firefox.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • HT1933 'Report a problem' link in the email with purchase receipt does not work.

    While opening itunes I get an error "unable to connect to itunes",then a screen with the text: "your request produced an error.NewNullResponse".It's in-app purchase, magazine subscription.How do I report a problem if the link does not work?

    Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report your issue to the iTunes Store.
    Regards.

  • html:link action="" input type="button"... does not work under IE browser

    Greeting,
    I have the following codes in struts1.3.5. It works fine under Firefox, but it does not work at all under Internet Explore (IT) at all. Any clues why under IE it does not work?
    <html:link action="/private/search">
    <input
    type="button"
    value="Search"
    class="search-button">
    </html:link>
    Thanks a lot!

    This would probably generate a HTML in which there will be a button inside anchor tag.
    This is not a standard HTML feature and no wonder this is not supported by IE. I copied the generated html codes into test.html to try on IE, the button does not work at all.
    Firefox is probably lenient here. True. test.html works in Firefox.
    You might want to just have a link or do a form submission on button click.The action designed does not need an actionForm. I updated my code to :<html:button onclick="location.href='processSearch'"
    property ="Search"
    value ="Search">
    </html:button>
    And now both Firefox & IE works fine.
    Thanks a lot!

  • Magic mouse forward backward swiping does not work from time to time

    Hello...
    from time to time the forward/backward swiping functionality of my magic mouse does not work (The scrolling works though). Disconnecting and reconnecting does not do the trick. So I guess it might be a software problem. Restarting the iMac does not always help at once. After a couple of times it will work though again.
    Can anyone help?
    Regards
    Bjoern

    your answer should be here.
    http://discussions.apple.com/thread.jspa?threadID=2211072&start=0&tstart=0

  • Error: ELM does not work from UI

    Hello guru´s,
    hard to explain this briefly, but here it goes.
    We´re trying to upload an ELM from UI, and it doesn´t work. But the thing is, if you just SAVE from UI (not launch), and then you go to CRMD_MKTLIST and you flag required fields, it works. But obviously, we need to do that from UI.
    Besides this, we´ve implemented a Badi CRM_MKTLIST_BADI for a specific format but it´s never called from UI; however, if we simulate the execution from SAP GUI, this BADI works correctly.
    Thanks in advance.

    SunSudio Express (December 2006 release) introduces some
    interesting new features, but there are still problems. For the first time,
    I was able to debug Fortran 90 applications in Linux, but debugging is
    still very limited. This is good to know that you were able to debug a f90 application
    on Linux. What problems do you see? Please, report them, and we
    will file them as bugs or RFEs (requests for enhancements).
    Furthermore, the Fortran error parser does not work, even when
    compiling using Sun's f95 compiler. Yes, you are right, this feature does not work yet.
    This is a heavy disadvantage. I assume that Fortran error parsing
    is not supported on Linux, although the tutorials don't make this
    point clear: Yes, it does not work yet on all platforms.
    In the Options window, there are settings concerning C/C++ (and
    its parser), but there are no similar options for the Fortran parser,
    even in "Advanced Settings" (which are similar to the old Options
    window). There will be similar options for Fortran.
    My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.JDK 1.5.0.09 is ok.
    We do not target Debian system, but we assume everything
    should work there (we test on Red Hat and SUSE).
    Good to know that our assumption is correct :-)
    I don't think that I'm doing something wrong, but I want to ask, just
    to be sure: has someone had seen the Fortran error parser working
    on Linux? No. It does not work on Linux, and it does not work on other platforms.
    What about Fortran word completion? No, this feature is not implemented yet.
    Thanks you for trying Sun Studio 12 Express release and for your report.
    Nik

  • Icloud log in with Apple id  does not work from my mac when i try to run on photo stream

    When I try to active photostream or sharing via icloud it does not work I get an errormessage that there is communication problems with icloud. I cant get around to administrate the stream from the Icloud site or via my imac directly. It has never worked!

    yes, the apple id works for everyting else, but not for icloud. on my phone and ipad it is set up with the correct apple id and password. however, when i try to log on to icloud under system by clicking the icon the erromessag that i get is unknown apple id or password.

  • Automatic text comparison does not work from child to Master in CUA

    Hi,
    When trying to transfer role specifications to CUA master from our child system the application log is displaying as seen in slg1.png.
    On our master system we are running 7.31 SP7 which is fine according to Note 1642106.
    Our client system is 7.31 sp5 and there for we went to note 1141736 and installed note 1580217 as the other three notes is not compatible with our system.
    we have also implemented the switch "CUA_AUTO_TXTCMP_ROLE" with YES in table USR_CUST on both systems.
    The "error" does not go away and the "synchronization" does not seem to be activated between the systems.

    Hi,
    This is a list of many Routing Modems and routers
    http://portforward.com/routers.htm
    AS you will see the Netgear section is quite long.
    Of those that are Wireless most will be G type devices.
    I am not saying DO the Port Forwarding.
    If you click on your Model and then Dismiss the Advert in the next page > Then Choose iChat in the Next List you will be told the Default Access info
    Most likely this will be 192.168.0.1 and admin and password as the Default Info.
    Once in the Set up pages you need to Check the menu on the left for UPnP and make sure it is Enabled (No Need for Port Forwarding then).
    In the WAN Page you need to Disable DOS (Or SPI) and Allow Response to Internet Pings on the WAN port.
    The 4500 was a typo, sorry about that. Should have read 500kbps
    On Adding Buddies.
    Apple Names (@Mac.com and @me.com) and AIM ones need to be added to an AIM Buddy list.
    By that I mean one that Logs into AIM.
    If you have a @mac.com name then you should have selected the @mac.com option when choosing the Account type.
    See the Drop down item in the middle of this Start Up Screen
    From http://www.ralphjohns.co.uk/versions/ichatvers4/howtoStartiChat.html
    Similarly you need to chose the account type the Buddy is as well.
    More info with pics
    So adding the Apple Test accounts requires that you type the same info as the iChat Software adds the @mac.com when you chose to add an @mac.com Buddy
    Sample of middle Drop down in Add Buddy but set to @me.com instead
    If you have a Jabber ID (And GoogleMail names work as GoogleTalk IDs and they are Jabber as well) you can add Jabber Buddies as well.
    There is a way with some Jabber Servers to Add the ability to Text chat to MSN and Yahoo Buddies.
    7:51 PM Monday; May 11, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Swf file does not work from InDesign

    I am not sure if this is a Flash or InDesign question, so i will post on both..
    I am trying to embed an “animated” swf file (that was created in flash) into an InDesign layout and then export the InDesign layout to swf. in the resulting html file my navigation works ok but the swf file does not play “animate” when viewed in html or flash. It only shows up as a graphic. 
    I have tried exporting the ID file to xfl and bringing it into flash but then none of my animation works. What am I doing wrong?
    any help would be appreciated.
    thanks
    mattG

    You´re doing nothing wrong. SWF export of InDesign CS4 doesn´t support any media files. You can place videos, sounds and animations into indesign layout, but if you export to SWF, they won´t work in resulting SWF. They work in interactive PDF.
    And you can export your basic layout to Flash CS4 by using XFL export and import those media elements in Flash, but that may be quite a job. I have been strugled a lot with that method. My files used to go really messy when I open them in Flash.

  • Crm pc ui F4 Help does not work properly for custom field

    Hi ,
    I am having a issue with F4 help. For a custom field I have enabled BP search. The custom field gets populated with selected BP number from the search screen.
    Problem is, 
    Once opportunity is saved, for standard fields BP name gets displayed while for my custom field BP name does not get displayed only BP number stays at the place.
    What should be custom field size to accomodate BP selection?
    Have anybody done something like assigning BP search with custom field ?
    Any Ideas if I am missing something?

    Hi Bhatt,
      Your problem isnt in the F4 application. The problem is the logic of class corresponding to fieldgroup that your field is contained.
      You need a development like standard.
    Regards.
    Manuel

  • Scine installing FF4, I have to right click on a link to open it. Standard clicking does not work all the time.

    In most websites I have to right-click a link and select open in new tab or new window to get the link to open. I cannot left click on a link and get the link to open.

    Try disabling the Ask Toolbar extension.

  • My wireless key board does not work but wireless mouse does?

    I can not get my wireless keyboard to work again after i changed the batteries, It work sonewhat before I chaged the batteries but don't work at all now. I tried removing the thing pluged into the usb port and i pushed the connect button on the bittom of keyboard but nothing works. The wireless mouse works fine. What could be wrong?

    Not sure which KB you have, but I'd check a few things.
    1) You might have a dead battery or two - perhaps try batteries known to be working in another device, such as a TV remote control.
    2) The KB shouldn't need to be re-synced just via a battery change.   However, if you do resync - you might need to hold the sync button longer.   On my TouchSmart IQ804, I usually push mine about 10 seconds or so.   I can pull the USB tranceiver out of the back of the unit and put it in the side/front port, that way I can watch the LED that indicates sync/transfer better.
    I know that there are some good wireless KB troubleshooting documents on the HP website - here is a link to one of them.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006821&lc=en&cc=uk&dlc=en
    -DM (a long-time HP employee)
    -DM (HP Retiree)
    NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
    If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

  • Driver CD which comes with KT4Ultra board does not work

    I have an driver CD with comes with the KT4Ultra that is starting up with a screen that says: Setup loading, please wait; and then it hangs and has a processor load of 99%. You cannot kill it. I'm using Windows XP professional.  ?(

    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=356&MODEL=MS-6590
    links to right will get you every thing on disk
    ring msi ,i would think they will send another

Maybe you are looking for