Linksys 2102 having no inbound audio on Outbound Calls

We have started to offer Linksys2102 ATA's to our customers and have experienced a unique issue.
When making an inbound call from PSTN to the ATA the audio is fine. No issues whatsoever. Whne making an outbound call from the ATA device the call will complete, however the Voip caller will have no inbound audio whatsoever. This includes hearing the ring. The party on the other end will have their phone ring and can pick up and hear the voip caller with no issue. However the audio coming back is stopped at the ATA.
We also have 2100's and there is not an issue with these. As a matter of fact, you can take the same network cable that you plugged into the 2102 and plug it into a 2100 with no changes to the network and the 2100 will work fine.
Taking packet traces of both the 2100 and the 2102 we have seen the 2100 will send the first RTP packet no matter the direction the call is made, either in or out. If it is an outbound call the RTP packet goes with the SIP INVITE packet.
The 2102 will very randomly exhibit the same behaviour (about 1 out of 10 times) as the 2100 and the call will be fine.
The other 9 times, the 2102 will wait to recieve the first RTP packet which will be delivered to the device's IP address and will choose to ignore it. The bytes recieved on the device do not go past 0.
Has anyone else seen this behaviour and does anyone have any suggestions?
Using STUN does not solve it. The key thing to remember is that the RTP inbound packet gets delivered to the IP address of the ATA, it just seems as if the ATA ignores it for some reason.
Thanks for anyone that can help.

The issue continues. We think it is related to a specific modem/router combo and are trying to configure a workaround.
Since linksys has many 2102s out in the world that are working properly and we are only experiencing this issue with a small amount the tech support callback that I recieved was useless.
I appreciate the reply and we are continuing and once I have worked one out I will post it in case anyone else has the problem.

Similar Messages

Branch phone no audio when making outbound PSTN call - inbound and On-Net calls are good

I am trying a new setup. There are no other phones on branch A configured with CUCM so there is no comparison. I setup another phone in Branch B for comparison.
Scenario:
CUCM (ver9) in Main site
Main Site and Branch A site has VPN for WAN connectivity.
Main Site and Branch B site has VPN for WAN connectivity
Branch A phone is registered to Main site CUCM and configured to use same settings as Branch B phone. Branch B phone has no issues at all
Branch A no audio when making PSTN outbound call
Branch A audio is good when receiving INbound PSTN call and inbound/outbound On-Net call
I am not sure if it is a routing issue or something else. Below is an excerpt from the RTM logs which is attached. I believe issue is on this part after call connects where it shows media error but not sure what to do to correct it. Assuming Firewall is not an issue. If we cant find out what is wrong, i will start looking at the firewall.
called number : 0016326635801
calling number: 4168
Phone IP : 10.100.3.29
Main Site Gateway IP : 10.130.3.9 / H323
CUCM : 10.130.3.115/116
=========================================================================================================
57315658.000 |22:32:55.911 |SdlSig |CcAlertReq |outgoing_call_proceeding3 |StationCdpc(3,100,59,74928) |StationD(3,100,58,2238) |3,100,13,119955.3^10.130.3.9^* |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] CI=60724230 CI.branch=0 FDataType=0opId=0ssType=0 SsKey=0invokeId=0resultExp=Fbpda=F pi.piid=30 pi.l=2 pi2.piid=30 pi2.l=0 pi3.piid=30 pi3.l=0IpAddrMode=0 ipAddrType=0 ipv4=0.0.0.0:0 ctiActive=F ctiFarEndDev=2 ctiCMId=3 media=2 lPart=d8997e28-66b6-7783-a5d6-8f46ef5da368 lPatt=4168 lModNum=tn=0npi=0ti=1nd=4168pi=1si1 lName=locale: 1 Name: India Test UnicodeName: India Test pi: 1 cName=locale: 1 Name: UnicodeName: pi: 0 cn:tn=0npi=0ti=1nd=80016326635801pi=0si1 cVMbox= localPatternUsage=2 connectedPatternUsage=5 lCnPart=e769cfa2-b6d1-b061-1b87-a7658c93fe72 lCnPatt=8.001! rn:tn=0npi=0ti=1nd=80016326635801pi=0si1 lLRPart=e769cfa2-b6d1-b061-1b87-a7658c93fe72 lLRPatt=8.001! lOCdpnPart=e769cfa2-b6d1-b061-1b87-a7658c93fe72 lOCdpnPatt=8.001! oCdpn:tn=0npi=0ti=1nd=80016326635801pi=0si1 oRFR =0 lBridgePartID= lCnBridgePartID= DevCEPN=b5ecff4d-f135-76cd-34a3-6e8adb746d1e lineCEPN=ce6c846c-e5d4-214d-8880-68250ba32103 CnDevCEPN=5265beb5-b11c-6218-5580-48cabc44d380 lrnCEPN=183b0e69-399b-9bd6-a49f-48a4ee886155 oCdpnCEPN=183b0e69-399b-9bd6-a49f-48a4ee886155 lHPMemCEPN= cHPMemCEPN=Supp DTMF=1DTMF Cfg=1DTMF Payload=0 isOffNetDev=T protected=1 geolocInfo={geolocPkid=, filterPkid=, geolocVal=, devType=3} locPkid= locName= deductBW=F fateShareId= videoTrafficClass=0TransparentData=null CanSupportSIPTandN=false TransId=0 AllowBitMask=0x0 UserAgentOrServer= OrigDDName=locale: 1 Name: UnicodeName: pi: 0 mCallerId= mCallerName= ignoreEarlyMedia=F
57315659.000 |22:32:55.911 |SdlSig |CcNotifyReq |call_delivered4 |StationCdpc(3,100,59,74928) |StationD(3,100,58,2238) |3,100,13,119955.4^10.130.3.9^* |[R:N-H:0,N:5,L:0,V:0,Z:0,D:0] CI=60724230 CI.branch=0 lPart=d8997e28-66b6-7783-a5d6-8f46ef5da368 lPatt=4168 lModNum=tn=0npi=0ti=1nd=4168pi=1si1 lName=locale: 1 Name: India Test UnicodeName: India Test pi: 1 cName=locale: 1 Name: UnicodeName: pi: 0 cn:tn=0npi=0ti=1nd=0016326635801pi=1si0 cVMbox= localPatternUsage=2 connectedPatternUsage=5 lCnPart=e769cfa2-b6d1-b061-1b87-a7658c93fe72 lCnPatt=8.001! rn:tn=0npi=0ti=1nd=80016326635801pi=0si1 lLRPart=e769cfa2-b6d1-b061-1b87-a7658c93fe72 lLRPatt=8.001! lOCdpnPart=e769cfa2-b6d1-b061-1b87-a7658c93fe72 lOCdpnPatt=8.001! oCdpn:tn=0npi=0ti=1nd=80016326635801pi=0si1 oRFR =0 lBridgePartID= lCnBridgePartID= DevCEPN=b5ecff4d-f135-76cd-34a3-6e8adb746d1e lineCEPN=ce6c846c-e5d4-214d-8880-68250ba32103 CnDevCEPN=5265beb5-b11c-6218-5580-48cabc44d380 lrnCEPN=183b0e69-399b-9bd6-a49f-48a4ee886155 oCdpnCEPN=183b0e69-399b-9bd6-a49f-48a4ee886155 lHPMemCEPN= cHPMemCEPN= onBehalf= whichSide=1 holdFlag=0 notifyMsg=locale: 1 Name: UnicodeName: promptMsg=locale: 1 Name: UnicodeName: apply Instr=0 s.sv=0 promptMsg.userLocale=1 cgDevName=SEP64D989C258FC ctiActive=F ctiFarEndDev=2 ctiCCMId=3 ctiEvt.evtType=0 ctiEvt.transId=0 ctiEvt.ED.succ=F ctiEvt.PD.ParkPart= secureStatus=(F,0) callState=4 media=1 bitMask=80800000 Supp DTMF=1DTMF Cfg=1DTMF Payload=0 notifiedDName= connType=0 connStatus=0newPL=5newPLDmn=0 networkDomain=suppressMOH=F triggerByJoin=F NotifInd= ni.niid=39 ni.l=0 ni.nnd=0deviceCepn= partitionSearchSpace= geolocInfo=null locPkid= locName= deductBW=F fateShareId= videoTrafficClass=0 dtmMcNodeId=0 dtmCurrentCi=0 isOffNetDevice=T ignCntH=F cmDeviceType=7 ssCause=0TransparentData=null CanSupportSIPTandN=false TransId=0 AllowBitMask=0x0 UserAgentOrServer= OrigDDName=locale: 1 Name: UnicodeName: pi: 0 mCallerId= mCallerName= FDataType=0opId=0ssType=0 SsKey=0invokeId=0resultExp=Fbpda=F mobilityEventType=0 CallInstanceNumber=0
57315660.000 |22:32:55.911 |SdlSig |StationOutputCallState |restart0 |StationD(3,100,58,2238) |StationCdpc(3,100,59,74928) |3,100,13,119955.3^10.130.3.9^* |[R:N-H:0,N:5,L:0,V:0,Z:0,D:0] State=3 privacy=0 Line=1 CI=60724230 SCCP P-level=4 P-Domain=0
57315660.001 |22:32:55.911 |AppInfo |StationD: (0002238) CallState callState=3 lineInstance=1 callReference=60724230 privacy=0 sccp_precedenceLv=4 precedenceDm=0
57315661.000 |22:32:55.911 |SdlSig |StationOutputSelectSoftKeys |restart0 |StationD(3,100,58,2238) |StationCdpc(3,100,59,74928) |3,100,13,119955.3^10.130.3.9^* |[R:N-H:0,N:4,L:0,V:0,Z:0,D:0] Line=1 CI=60724230 SKIndex=8 Mask=ffffffff
57315661.001 |22:32:55.911 |AppInfo |StationD: (0002238) SelectSoftKeys instance=1 reference=60724230 softKeySetIndex=8 validKeyMask=ffffffff.
57315662.000 |22:32:55.911 |SdlSig |StationOutputDisplayPromptStatus |restart0 |StationD(3,100,58,2238) |StationCdpc(3,100,59,74928) |3,100,13,119955.3^10.130.3.9^* |[R:N-H:0,N:3,L:0,V:0,Z:0,D:0] TimeOut=0 Status= UnicodeStatus= Line=1 CI=60724230
57315662.001 |22:32:55.911 |AppInfo |StationD: (0002238) DisplayPromptStatus timeOut=0 Status='' content='Ring Out' line=1 CI=60724230 ver=85720016.
57315663.000 |22:32:55.911 |SdlSig |StationOutputCallInfo |restart0 |StationD(3,100,58,2238) |StationCdpc(3,100,59,74928) |3,100,13,119955.3^10.130.3.9^* |[R:N-H:0,N:2,L:0,V:0,Z:0,D:0] cdpn="80016326635801" cdpnVMB="" cdpnParty="locale: 1 Name: UnicodeName: pi: 0" cgpn="4168" cgpnVMB="" cgpnParty="locale: 1 Name: India Test UnicodeName: India Test pi: 1" oCdpn="80016326635801" oCdpnVMb="" oCdpnParty="locale: 1 Name: UnicodeName: pi: 0" OCdpnReason="0" lCdpn="80016326635801" lCdpnVMb="" lCdpnParty="locale: 1 Name: UnicodeName: pi: 0" lCdpnReason="0" line="1" CI="60724230" callInstance="1" callType="2" CallSecurityStatusType="0" restrictionBits="0" huntPilot="" huntPilotParty="locale: 1 Name: UnicodeName: pi: 0"
57315663.001 |22:32:55.911 |AppInfo |StationD: (0002238) (3,100,13,119947) CallInfo callingPartyName='India Test' callingParty=4168 cgpnVoiceMailbox= alternateCallingParty= calledPartyName='' calledParty=80016326635801 cdpnVoiceMailbox= originalCalledPartyName='' originalCalledParty=80016326635801 originalCdpnVoiceMailbox= originalCdpnRedirectReason=0 lastRedirectingPartyName='' lastRedirectingParty=80016326635801 lastRedirectingVoiceMailbox= lastRedirectingReason=0 callType=2(OutBound) lineInstance=1 callReference=60724230. version: 85720016
57315664.000 |22:32:55.911 |SdlSig |DSetCallState |restart0 |StationD(3,100,58,2238) |StationCdpc(3,100,59,74928) |3,100,13,119955.3^10.130.3.9^* |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] CallState = call_delivered4
57315664.001 |22:32:55.911 |AppInfo |StationD: (0002238) DEBUG- star_DSetCallState(7) State of cdpc(74928) is 6.
57315665.000 |22:32:55.911 |SdlSig |StationOutputCallInfo |restart0 |StationD(3,100,58,2238) |StationCdpc(3,100,59,74928) |3,100,13,119955.4^10.130.3.9^* |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] cdpn="0016326635801" cdpnVMB="" cdpnParty="locale: 1 Name: UnicodeName: pi: 0" cgpn="4168" cgpnVMB="" cgpnParty="locale: 1 Name: India Test UnicodeName: India Test pi: 1" oCdpn="80016326635801" oCdpnVMb="" oCdpnParty="locale: 1 Name: UnicodeName: pi: 0" OCdpnReason="0" lCdpn="80016326635801" lCdpnVMb="" lCdpnParty="locale: 1 Name: UnicodeName: pi: 0" lCdpnReason="0" line="1" CI="60724230" callInstance="1" callType="2" CallSecurityStatusType="0" restrictionBits="0" huntPilot="" huntPilotParty="locale: 1 Name: UnicodeName: pi: 0"
57315665.001 |22:32:55.911 |AppInfo |StationD: (0002238) (3,100,13,119947) CallInfo callingPartyName='India Test' callingParty=4168 cgpnVoiceMailbox= alternateCallingParty= calledPartyName='' calledParty=0016326635801 cdpnVoiceMailbox= originalCalledPartyName='' originalCalledParty=80016326635801 originalCdpnVoiceMailbox= originalCdpnRedirectReason=0 lastRedirectingPartyName='' lastRedirectingParty=80016326635801 lastRedirectingVoiceMailbox= lastRedirectingReason=0 callType=2(OutBound) lineInstance=1 callReference=60724230. version: 85720016
57315666.000 |22:32:55.911 |Created | | |SdlTCPConnection(3,100,13,119956) |SdlTCPConnector(3,100,12,106644) | |NumOfCurrentInstances: 101
57315667.000 |22:32:55.911 |Stopping | | |SdlTCPConnector(3,100,12,106644) |SdlTCPConnector(3,100,12,106644) | |NumOfCurrentInstances: 1
57315668.000 |22:32:55.912 |SdlSig |H245TcpConnectionInfo |waitForSdlRsp |TranslateAndTransport(3,100,21,53370) |H245Handler(3,100,29,1) |3,100,12,106644.1^*^* |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0]
57315668.001 |22:32:55.912 |AppInfo |TranslateAndTransport(53370)::waitForSdlRsp_H245TcpConnectionInfo - received H245TcpConnectionInfo from H245Handler
57315669.000 |22:32:55.912 |SdlSig |TtControlChannelEstablished |waitForTransportEstablishment |H245SessionManager(3,100,28,53370) |TranslateAndTransport(3,100,21,53370) |3,100,12,106644.1^*^* |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0]
57315670.000 |22:32:55.915 |SdlSig |SdlDataInd |wait |H245Handler(3,100,29,1) |SdlTCPConnection(3,100,13,119956) |3,100,13,119956.2^*^* |*TraceFlagOverrode
57315670.001 |22:32:55.915 |AppInfo |H245ASN - TtPid=(53370) [0xb42276e0 1964 bytes] -Incoming #455653 -value MultimediaSystemControlMessage ::= request : terminalCapabilitySet :
sequenceNumber 1,
protocolIdentifier { 0 0 8 245 0 7 },
multiplexCapability h2250Capability :
maximumAudioDelayJitter 20,
receiveMultipointCapability
multicastCapability FALSE,
multiUniCastConference FALSE,
mediaDistributionCapability
centralizedControl FALSE,
distributedControl FALSE,
centralizedAudio FALSE,
distributedAudio FALSE,
centralizedVideo FALSE,
distributedVideo FALSE
transmitMultipointCapability
multicastCapability FALSE,
multiUniCastConference FALSE,
mediaDistributionCapability
centralizedControl FALSE,
distributedControl FALSE,
centralizedAudio FALSE,
distributedAudio FALSE,
centralizedVideo FALSE,
distributedVideo FALSE
receiveAndTransmitMultipointCapability
multicastCapability FALSE,
multiUniCastConference FALSE,
mediaDistributionCapability
centralizedControl FALSE,
distributedControl FALSE,
centralizedAudio FALSE,
distributedAudio FALSE,
centralizedVideo FALSE,
distributedVideo FALSE
mcCapability
centralizedConferenceMC FALSE,
decentralizedConferenceMC FALSE
rtcpVideoControlCapability FALSE,
mediaPacketizationCapability
h261aVideoPacketization FALSE
logicalChannelSwitchingCapability FALSE,
t120DynamicPortCapability FALSE
capabilityTable
capabilityTableEntryNumber 27,
capability receiveUserInputCapability : basicString : NULL
capabilityTableEntryNumber 3,
capability receiveAudioCapability : g711Ulaw64k : 20
capabilityDescriptors
capabilityDescriptorNumber 1,
simultaneousCapabilities
3
27
57315670.002 |22:32:55.915 |AppInfo |DET-H245Log-- : H323-2833. H245CapabilityDefinition lookupOutBandSignalCapEntry: entryNumber=27, receiveInputCap=2
57315670.003 |22:32:55.915 |AppInfo |DET-H245Log-- : H323-2833. H245CapabilityDefinition lookupOutBandSignalCapEntry: No SignalType UserInputCapability, put Alphanumeric type back, entryNumber=27, UserCap=2,
57315671.000 |22:32:55.915 |SdlSig |CeseTerminalCapabilitySet |wait |TranslateAndTransport(3,100,21,53370) |H245Handler(3,100,29,1) |3,100,13,119956.2^*^* |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] SeqNo=1 len=1964 TCS heap-> 0xb42276e0 capCount=2
57315672.000 |22:32:55.915 |SdlSig |SdlDataInd |wait |H245Handler(3,100,29,1) |SdlTCPConnection(3,100,13,119956) |3,100,13,119956.3^*^* |*TraceFlagOverrode
57315672.001 |22:32:55.915 |AppInfo |H245ASN - TtPid=(53370) [0xb27ceab8 1444 bytes] -Incoming #455654 -value MultimediaSystemControlMessage ::= request : masterSlaveDetermination :
terminalType 60,
statusDeterminationNumber 8220
57315673.000 |22:32:55.915 |SdlSig |MsdseMasterSlaveDetermination |wait |TranslateAndTransport(3,100,21,53370) |H245Handler(3,100,29,1) |3,100,13,119956.3^*^* |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0]
57315674.000 |22:32:55.915 |SdlSig |CeseTerminalCapabilitySet |paused |CeseIncoming(3,100,20,53370) |TranslateAndTransport(3,100,21,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] SeqNo=1 len=1964 TCS heap-> 0xb42276e0 capCount=2
57315675.000 |22:32:55.915 |SdlSig |MsdseMasterSlaveDetermination |paused |Msdse(3,100,23,53370) |TranslateAndTransport(3,100,21,53370) |3,100,13,119956.3^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0]
57315676.000 |22:32:55.915 |SdlSig-S |MsdseMasterSlaveDetermination |paused |Msdse(3,100,23,53370) |TranslateAndTransport(3,100,21,53370) |3,100,13,119956.3^10.130.3.9^Port 49839 |
57315677.000 |22:32:55.915 |SdlSig |CeseTransferIndication |capabilityExchange |H245SessionManager(3,100,28,53370) |CeseIncoming(3,100,20,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] len=1964 TCS heap-> 0xb42276e0 capCount=2
57315678.000 |22:32:55.915 |SdlSig |H245CapabilitiesIncomingIndication |waitForCapabilitiesExchange |H245Interface(3,100,185,53370) |H245SessionManager(3,100,28,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] len=1964 TCS heap-> 0xb42276e0 capCount=2
57315678.001 |22:32:55.915 |AppInfo |DET-H245Interface-(53370), star_H245CapabilitiesIncoming , received sdpMode = 0, videoCapable=0, dataCapable=0, videoSetupAfterAudio= 0,mMXOfferNeeded= 0
57315678.002 |22:32:55.915 |AppInfo |DET-H245Interface-(53370)::convertH245CapabilitiesToCapabilities, H323-2833. Incoming OOB user Input Cap choice =2, oobUserInputCap=1
57315678.003 |22:32:55.915 |AppInfo |DET-H245Interface-(53370)::convertH245CapabilitiesToCapabilities, cmCloudH245ICTVersion(0), H323-2833. After incoming TCS DTMFProfile updated, DTMF Method=1, 2833 payloadNum=0, OOB cap=1
57315678.004 |22:32:55.915 |AppInfo |DET-MediaUtility-::getCodecPrefOption, xferModeA=7 xferModeB=4 honorOfferCodecPrefA=0 honorOfferCodecPrefB=0 PREF_LIST
57315678.005 |22:32:55.915 |AppInfo |DET-MediaUtility-::setCodecPrefOptionAndRegionB, audioPassThru=0 myRegion=SIN-REG peerRegion=SIN-REG farEndRegion= regionB=SIN-REG PREF_LIST
57315678.006 |22:32:55.915 |AppInfo |DET-H245Interface-(53370)::setCodecPrefOptionAndOtherSideRegion, otherSideRegion=SIN-REG, PREF_LIST
57315678.007 |22:32:55.915 |AppInfo |DET-RegionsServer::sortMediaPayload-capCount=1, regionA=SIN-REG, regionB=SIN-REG, fkCodecList=911b707a-7d0e-c4cb-cc2a-89b4178491da
57315678.008 |22:32:55.915 |AppInfo |DET-MediaUtility-::getCodecPrefOption, xferModeA=7 xferModeB=4 honorOfferCodecPrefA=0 honorOfferCodecPrefB=0 PREF_LIST
57315678.009 |22:32:55.915 |AppInfo |DET-MediaUtility-::setCodecPrefOptionAndRegionB, audioPassThru=0 myRegion=SIN-REG peerRegion=SIN-REG farEndRegion= regionB=SIN-REG PREF_LIST
57315678.010 |22:32:55.915 |AppInfo |DET-H245Interface-(53370)::setCodecPrefOptionAndOtherSideRegion, otherSideRegion=SIN-REG, PREF_LIST
57315678.011 |22:32:55.915 |AppInfo |DET-RegionsServer::matchCapabilities-- savedOption=1, PREF_LIST, regionA=SIN-REG regionB=SIN-REG latentCaps(A=0, B=0) kbps=64, capACount=1, capBCount=0
57315678.012 |22:32:55.915 |AppInfo |RegionsServer: applyCodecFilterIfNeeded - no codecs remained after filtering so restored original 0 caps
57315679.000 |22:32:55.915 |SdlSig |CeseTransferResponse |paused |CeseIncoming(3,100,20,53370) |H245SessionManager(3,100,28,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0]
57315680.000 |22:32:55.915 |SdlSig-S |CeseTransferResponse |paused |CeseIncoming(3,100,20,53370) |H245SessionManager(3,100,28,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |
57315681.000 |22:32:55.915 |SdlSig |MXCapabilitiesIncoming |waitInterfacesCapabilities |MediaExchange(3,100,138,127079) |H245Interface(3,100,185,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] audioCapCount=1 Caps[4(20)] videoCapCount=0, [] extendedVidCount=0, [] Supp.Payload RFC[0 0 0 0 0 ] h245ICTVersion0 useOldGWBytesForGSMConversion=F cryptoCapCount=0 cryptoVidDataCapCount=0 DTMF Profile(1,1,0,1,F)LatentCaps=null
57315681.001 |22:32:55.915 |AppInfo |DET-MediaExchange-(127079)::canForwardCapsToOtherEnd, activeCapEnabled(0, 0), canForwardCapsToOtherEnd=0
57315681.002 |22:32:55.915 |AppInfo |DET-MediaExchange-(127079)::finishCapExchange, capFromTwoIFs=1,capFromFarEnd=0,aPT=0,vPT=2,capE2E=0,capDone=1
57315681.003 |22:32:55.915 |AppInfo |DET-MediaExchange-(127079)::handleInterfaceVisited, returned finishCapExchange
57315681.004 |22:32:55.915 |AppInfo |DET-MediaExchange-(127079)::handleInterfaceVisited, allowReConnect(1) partyAHasCapsorACE(1)partybHasCapsorACE (0)
57315682.000 |22:32:55.915 |SdlSig |AuReConnectRequest |waitDisconnect |MediaManager(3,100,133,117676) |MediaExchange(3,100,138,127079) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] Party1: MR=0 CI=60724230 audioCapCount=9 region=SIN-REG xferMode=4 mrid=0 audioId=0 MMCap=0x1 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,234,63534) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null Party2: MR=0 CI=60724231 audioCapCount=1 region=SIN-REG xferMode=7 mrid=0 audioId=0 MMCap=0x9 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,185,53370) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null reConnType=0 videoCall=F AllowedCallType=0x0 mtpChanged=F precLvl=5 resCap=0 party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0
57315682.001 |22:32:55.915 |AppInfo |SIG-MediaManager-(117676)::waitDisconnect_AuReConnectRequest, reConnectType(0)
57315682.002 |22:32:55.915 |AppInfo |DET-MediaManager-(117676)::waitDisconnect_AuReConnectRequest, Update AuConnectRequestMsg party capability. isDeviceVideoCapable (party1=0, party2=0) AllowedCallType=0x00000000
57315682.003 |22:32:55.915 |AppInfo |DET-MediaManager-(117676)::waitDisconnect_AuReConnectRequest, ReConnect--sending disconnect, Party1DTMFmethod(1) Party2DTMFMethod(1)
57315683.000 |22:32:55.915 |SdlSig |AuDisconnectRequest |waitCleanup |MediaManager(3,100,133,117676) |MediaManager(3,100,133,117676) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI1=60724230 CI2=60724231 sc=0 disconnType=0 ssReason=1 clearType=0 IF1Created=T IF2Created=T party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0 party1.dtmCall=0 party2.dtmCall=0 reconnectPending=F forceStop=F
57315683.001 |22:32:55.915 |AppInfo |!!ERROR!! -MediaManager-(117676)::handle_AuDisconnectRequest, mCleanupPreallocatedMTP=0
57315683.002 |22:32:55.915 |AppInfo |DET-MediaManager-(117676)::handle_AuDisconnectRequest, mrid(0,0) ci(6072423060724231) size(1), dt(0)
57315683.003 |22:32:55.915 |AppInfo |DET-MediaManager-(117676)::keepMTPConnection, sr(1), resrcAllocateSide(0), party1CI(60724230), bRet(0)
57315683.004 |22:32:55.915 |AppInfo |DET-MediaManager-(117676) - sendDisconnectReqToMX - disconnType=0, Party1DTMFmethod(1) Party2DTMFMethod(1) party1capCount(9) party2capCount(0), MC(0,0), deviceVideoCap(0, 0)
57315684.000 |22:32:55.915 |SdlSig |AuDisconnectRequest |waitInterfacesCapabilities |MediaExchange(3,100,138,127079) |MediaManager(3,100,133,117676) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI1=60724230 CI2=60724231 sc=0 disconnType=0 ssReason=1 clearType=0 IF1Created=T IF2Created=T party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0 party1.dtmCall=0 party2.dtmCall=0 reconnectPending=F forceStop=F
57315684.001 |22:32:55.915 |AppInfo |DET-MediaExchange-(127079)::wait_Disconnect, dt=0,stReason=1,IFHandling(0,0)
57315685.000 |22:32:55.915 |SdlSig-Q |MXInterfaceEstablished |waitStopped |MediaExchange(3,100,138,127079) |AgenaInterface(3,100,234,63534) |3,100,13,119955.3^10.130.3.9^* |
57315686.000 |22:32:55.915 |SdlSig-D |MXInterfaceEstablished |waitStopped |MediaExchange(3,100,138,127079) |AgenaInterface(3,100,234,63534) |3,100,13,119955.3^10.130.3.9^* |
57315687.000 |22:32:55.915 |SdlSig |MXInterfaceStopStreaming |waitForMXCapabilitiesorOfferorAnswer |AgenaInterface(3,100,234,63534) |MediaExchange(3,100,138,127079) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] ClearType= 0 StoppedBy= 0 DisconnecType= 0 StopStreamingReason=1 reconPending= FmHoldingPartyCI= 0mForceStop= F
57315687.001 |22:32:55.915 |AppInfo |DET-AgenaInterfaceBase-(63534)::closeRecvForAllAudioChannels, mAudioIncomingLC2AGIDMap size = 0
57315688.000 |22:32:55.915 |SdlSig |MXInterfaceStopStreaming |waitForCapabilitiesExchange |H245Interface(3,100,185,53370) |MediaExchange(3,100,138,127079) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] ClearType= 0 StoppedBy= 0 DisconnecType= 0 StopStreamingReason=1 reconPending= FmHoldingPartyCI= 0mForceStop= F
57315688.001 |22:32:55.915 |AppInfo |DET-H245Interface-(53370)::handleStopStreaming, stopStreamingRecdInWaitForCapExchgState=0
57315688.002 |22:32:55.915 |AppInfo |DET-H245Interface-(53370)::handleStopStreaming, mInitialCallSendDumyCapsIfNeeded=1
57315689.000 |22:32:55.915 |SdlSig |MXInterfaceStoppedStreaming |waitStopped |MediaExchange(3,100,138,127079) |AgenaInterface(3,100,234,63534) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0]
57315690.000 |22:32:55.915 |SdlSig |MXInterfaceStoppedStreaming |waitStopped |MediaExchange(3,100,138,127079) |H245Interface(3,100,185,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0]
57315690.001 |22:32:55.915 |Stopping | | |MediaExchange(3,100,138,127079) |MediaExchange(3,100,138,127079) | |NumOfCurrentInstances: 1
57315691.000 |22:32:55.915 |SdlSig |MXNewParentPid |restart |AgenaInterface(3,100,234,63534) |MediaExchange(3,100,138,127079) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:2,L:0,V:0,Z:0,D:0] parent pid:nodeId=3.PN=134.PI=1.vPT=2 allow2833=F injectDigitstoMTP=F subscribetoMTP=F passthru2833=F
57315692.000 |22:32:55.915 |SdlSig |MXNewParentPid |waitReconnect |H245Interface(3,100,185,53370) |MediaExchange(3,100,138,127079) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] parent pid:nodeId=3.PN=134.PI=1.vPT=2 allow2833=F injectDigitstoMTP=F subscribetoMTP=F passthru2833=F
57315693.000 |22:32:55.915 |SdlSig |AuDisconnectReply |waitCleanup |MediaManager(3,100,133,117676) |MediaExchange(3,100,138,127079) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI1=60724230 CI2=60724231 sc=0 disconnType=0 ssReason=1 clearType=0 IF1Created=T IF2Created=T party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0 party1.dtmCall=0 party2.dtmCall=0 reconnectPending=F forceStop=F
57315693.001 |22:32:55.915 |AppInfo |DET-MediaManager-(117676)::waitCleanup_AuDisconnectReply, CI(60724230,60724231), disconnType(0), stopStreamingReason(1) DTMFMethod(1 1),MC(0,0),rf(1), nD(1,1)
57315693.002 |22:32:55.915 |AppInfo |DET-MediaManager-(117676)::waitCleanup_AuDisconnectReply, videoCap (0, 0), AllowedCallType=0
57315693.003 |22:32:55.915 |AppInfo |SIG-MediaManager-(117676)::waitCleanup_AuDisconnectReply - recv all disconn replies, send ReConnReq to MC, reConnectType(0), party(60724230,60724231) mrid(0 0) party1DTMF(1 1 0) part2DTMF(1 1 0), MC(0,0), deviceVideo (0, 0), AllowedCallType=0x00000000
57315693.004 |22:32:55.915 |Stopping | | |MediaManager(3,100,133,117676) |MediaManager(3,100,133,117676) | |NumOfCurrentInstances: 1
57315694.000 |22:32:55.915 |SdlSig |AuReConnectRequest |wait |MediaCoordinator(3,100,134,1) |MediaManager(3,100,133,117676) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] Party1: MR=0 CI=60724230 audioCapCount=9 region=SIN-REG xferMode=4 mrid=0 audioId=0 MMCap=0x1 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,234,63534) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null Party2: MR=0 CI=60724231 audioCapCount=1 region=SIN-REG xferMode=7 mrid=0 audioId=0 MMCap=0x9 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,185,53370) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null reConnType=0 videoCall=F AllowedCallType=0x0 mtpChanged=F precLvl=5 resCap=0 party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0
57315694.001 |22:32:55.915 |AppInfo |SIG-MediaCoordinator-wait_AuReConnectRequest, reConnectType(0)
57315694.002 |22:32:55.915 |AppInfo |SIG-MediaCoordinator-wait_AuReConnectRequest - removing MediaManager(117676) from connection list
57315695.000 |22:32:55.915 |SdlSig |AuConnectRequest |wait |MediaCoordinator(3,100,134,1) |MediaCoordinator(3,100,134,1) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] Party1: MR=0 CI=60724230 audioCapCount=9 region=SIN-REG xferMode=4 mrid=0 audioId=0 MMCap=0x1 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,234,63534) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null Party2: MR=0 CI=60724231 audioCapCount=1 region=SIN-REG xferMode=7 mrid=0 audioId=0 MMCap=0x9 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,185,53370) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null reConnType=0 videoCall=F AllowedCallType=0x0 mtpChanged=F precLvl=5 resCap=0 party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0
57315695.001 |22:32:55.915 |Created | | |MediaManager(3,100,133,117677) |MediaCoordinator(3,100,134,1) | |NumOfCurrentInstances: 1
57315695.002 |22:32:55.915 |AppInfo |SIG-MediaCoordinator-wait_AuConnectRequest - new MediaManager(133,117677) started
57315696.000 |22:32:55.915 |SdlSig |AuConnectRequest |waitConnectRequest |MediaManager(3,100,133,117677) |MediaCoordinator(3,100,134,1) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] Party1: MR=0 CI=60724230 audioCapCount=9 region=SIN-REG xferMode=4 mrid=0 audioId=0 MMCap=0x1 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,234,63534) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null Party2: MR=0 CI=60724231 audioCapCount=1 region=SIN-REG xferMode=7 mrid=0 audioId=0 MMCap=0x9 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,185,53370) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null reConnType=0 videoCall=F AllowedCallType=0x0 mtpChanged=F precLvl=5 resCap=0 party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0
57315696.001 |22:32:55.915 |AppInfo |SIG-MediaManager-(117677)::wait_AuConnectRequest, CI(60724230,60724231), capCount(9,1), mcNodeId(0,0), xferMode(4,7), reConnectType(0), mrid (0, 0) IFCreated(1 1) proIns(63534 53370), AC(0,0), party1DTMF(1 1 0 1 0) party2DTMF(1 1 0 1 0),reConnFlag=1, connType(3,3), IFHand(0,0),MTP(0,0),MRGL(5212b81b-1ba4-b897-0a93-0125344b429e,5212b81b-1ba4-b897-0a93-0125344b429e) videoCap(0 0), mmCallType(0),FS(0,0), IpAddrMode(0 0) aPid(3, 58, 2238), bPid(3, 189, 55784) EOType(0 0) MOHAnnConnType(0 0) honorCodec(0 0)
57315697.000 |22:32:55.915 |SdlSig |CACInfoReq |wait |ReservationMgr(3,100,103,1) |MediaManager(3,100,133,117677) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI= 0 aCI=60724230 bCI=60724231
57315698.000 |22:32:55.915 |SdlSig |CACInfoReq |active |LBMInterface(3,100,169,1) |ReservationMgr(3,100,103,1) |3,100,13,119956.2^10.130.3.9^Port 49839 |[T:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI= 0 aCI=60724230 bCI=60724231
57315698.001 |22:32:55.915 |AppInfo |LBMIF: CI: 60724230 INFOREQ 3,100,58,2238
57315698.002 |22:32:55.915 |AppInfo |LBMIF: CI: 60724231 INFOREQ' 3,100,189,55784
57315699.000 |22:32:55.915 |SdlSig |CACInfoRes |wait |ReservationMgr(3,100,103,1) |LBMInterface(3,100,169,1) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI= 0 aCI=60724230 bCI=60724231 pol=0 rsvpStatus=1 sessJoined=F staIdx_no_agent=0 AudioBWReserved eoSent=F aAgent: confID =0 ci =0 capCt =0 reg= mtpType =2 agentCt =0 mmCapSet=0 agentAllo =0 RemoAgent=F DevCap=0 ipAddrMode=0 bAgent: confID =0 ci =0 capCt =0 reg= mtpType =2 agentCt =0 mmCapSet=0 agentAllo =0 RemoAgent=F DevCap=0 ipAddrMode=0 aPort: NumPort =0 bPort: NumPort =0 otherAgentPort: NumPort =0
57315700.000 |22:32:55.915 |SdlSig |CACInfoReq |wait |RSVPSession(3,100,100,79309) |ReservationMgr(3,100,103,1) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI= 0 aCI=60724230 bCI=60724231
57315701.000 |22:32:55.916 |SdlSig |CACInfoRes |wait |ReservationMgr(3,100,103,1) |RSVPSession(3,100,100,79309) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI= 60724230 aCI=60724230 bCI=60724231 pol=0 rsvpStatus=1 sessJoined=F staIdx_no_agent=0 NoBWReserved eoSent=F aAgent: confID =0 ci =0 capCt =0 reg= mtpType =2 agentCt =0 mmCapSet=0 agentAllo =0 RemoAgent=F DevCap=0 ipAddrMode=0 bAgent: confID =0 ci =0 capCt =0 reg= mtpType =2 agentCt =0 mmCapSet=0 agentAllo =0 RemoAgent=F DevCap=0 ipAddrMode=0 aPort: NumPort =0 bPort: NumPort =0 otherAgentPort: NumPort =0
57315702.000 |22:32:55.916 |SdlSig |CACInfoRes |waitCACInfoRes |MediaManager(3,100,133,117677) |ReservationMgr(3,100,103,1) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI= 0 aCI=60724230 bCI=60724231 pol=0 rsvpStatus=1 sessJoined=F staIdx_no_agent=0 AudioBWReserved eoSent=F aAgent: confID =0 ci =0 capCt =0 reg= mtpType =2 agentCt =0 mmCapSet=0 agentAllo =0 RemoAgent=F DevCap=0 ipAddrMode=0 bAgent: confID =0 ci =0 capCt =0 reg= mtpType =2 agentCt =0 mmCapSet=0 agentAllo =0 RemoAgent=F DevCap=0 ipAddrMode=0 aPort: NumPort =0 bPort: NumPort =0 otherAgentPort: NumPort =0
57315702.001 |22:32:55.916 |AppInfo |DET-MediaManager-(117677) - waitCACInfoRes_CACInfoRes- qosType=0 videoEsc=0 mNoVideoResvAttempted=1 VideoCall=0
57315702.002 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::waitCACInfoRes_CACInfoRes, rsvp(0,0), aE2ERegion(64) deviceAcaps(0) deviceBCaps(0),noVideoResv(1), mmAllowedCallType(0x00000000)
57315702.003 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::bothPartiesVideoCapable=0 MainVideoCap=0 SecondVideoCap=0
57315702.004 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::mapCapabilitiesToMMCallType, policy=0, hasRSVP=0, mainVideoCap=0,dataCap=0, allowedCallType=0x00000001, V region(e2e=384, 1)
57315702.005 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::buildMtpXcoderAllocList, savedConnectionCount=0, QosType=0
57315702.006 |22:32:55.916 |AppInfo |DET-RegionsServer::matchCapabilities-- savedOption=3, PREF_NONE, regionA=(null) regionB=(null) latentCaps(A=0, B=0) kbps=64, capACount=9, capBCount=1
57315702.007 |22:32:55.916 |AppInfo |DET-RegionsServer::handleMatchCapabilities()-- BEFORE MATCHING LOGIC applied(after filtering), sideARefCaps=1 refCapsSaveOpt=1 otherCapsSaveOpt=1 capsA[7]::capCount=7 (Cap,ptime)= (4,40) (2,40) (86,60) (15,60) (16,60) (11,60) (12,60) capsB[1]::capCount=1 (Cap,ptime)= (4,20)
57315702.008 |22:32:55.916 |AppInfo |DET-RegionsServer::handleMatchCapabilities()-- AFTER MATCHING LOGIC applied, capsA[1]::capCount=1 (Cap,ptime)= (4,40) capsB[1]::capCount=1 (Cap,ptime)= (4,20) numMatchedCaps=1
57315702.009 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::checkAudioPassThru, param(0,1), capCount(9,1), mtpPT=1, aPT=1
57315702.010 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::preCheckCapabilities, region1=SIN-REG, region2=SIN-REG, Pty1 capCount=9 (Cap,ptime)= (25,40) (4,40) (2,40) (86,60) (15,60) (16,60) (11,60) (12,60) (257,1), Pty2 capCount=1 (Cap,ptime)= (4,20)
57315702.011 |22:32:55.916 |AppInfo |DET-RegionsServer::matchCapabilities-- savedOption=0, PREF_NONE, regionA=(null) regionB=(null) latentCaps(A=0, B=0) kbps=64, capACount=9, capBCount=1
57315702.012 |22:32:55.916 |AppInfo |DET-RegionsServer::handleMatchCapabilities()-- BEFORE MATCHING LOGIC applied(after filtering), sideARefCaps=1 refCapsSaveOpt=0 otherCapsSaveOpt=0 capsA[7]::capCount=7 (Cap,ptime)= (4,40) (2,40) (86,60) (15,60) (16,60) (11,60) (12,60) capsB[1]::capCount=1 (Cap,ptime)= (4,20)
57315702.013 |22:32:55.916 |AppInfo |DET-RegionsServer::handleMatchCapabilities()-- AFTER MATCHING LOGIC applied, capsA[7]::capCount=7 (Cap,ptime)= (4,40) (2,40) (86,60) (15,60) (16,60) (11,60) (12,60) capsB[1]::capCount=1 (Cap,ptime)= (4,20) numMatchedCaps=1
57315702.014 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::prepareInitialConnectionList, Party1CapCount=9 Party2CapCount=1 XcoderRequired=0 xcodingSide=0 allowMTP=0
57315702.015 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::AllocateXcoderandMTPWithZeroSavedConnection
57315702.016 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::isMTPNeededForDTMF, both parties are non-SIP and we'll do OOB for DTMF
57315702.017 |22:32:55.916 |AppInfo |DET-MediaManager-(117677) - isIpv6CapableMTPNeeded(0) ipAddrMode(0 0) mtpside(0)
57315702.018 |22:32:55.916 |AppInfo |SIG-MediaManager-(117677)::handleAuConnectRequest, connCount=0
57315702.019 |22:32:55.916 |Created | | |MediaExchange(3,100,138,127080) |MediaManager(3,100,133,117677) | |NumOfCurrentInstances: 1
57315702.020 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::getAllow2833FortheCall, 2833 is not allowed for the call
57315703.000 |22:32:55.916 |SdlSig |AuConnectRequest |waitAuConnectRequest |MediaExchange(3,100,138,127080) |MediaManager(3,100,133,117677) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] Party1: MR=0 CI=60724230 audioCapCount=9 region=SIN-REG xferMode=4 mrid=0 audioId=0 MMCap=0x1 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,234,63534) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null Party2: MR=0 CI=60724231 audioCapCount=1 region=SIN-REG xferMode=7 mrid=0 audioId=0 MMCap=0x9 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,185,53370) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null reConnType=0 videoCall=F AllowedCallType=0x1 mtpChanged=F precLvl=5 resCap=0 party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0
57315703.001 |22:32:55.916 |AppInfo |DET-MediaExchange-(127080)::wait_AuConnectRequest, party1(CI=60724230, MXIFHandling=0, MediaReq=0,xferMode=4),party2(CI=60724231, MXIFHandling=0,xferMode=7), farEnd(XferMode=0,AC=0,T38=0,FS=0, mediaReq=0), PT(2,2),connType(3,3), farendIpAddrMode=0
57315703.002 |22:32:55.916 |AppInfo |DET-MediaExchange-(127080)::addPartyAandPartyB, party1:xferMode=4, party2:xferMode=7
57315703.003 |22:32:55.916 |AppInfo |DET-MediaExchange-(127080)::setEOOpaqueMediaInfoForInterface, peerEarlyOfferType(0), farEndEarlyOfferType(0), h323EarlyOfferInfo(0)
57315703.004 |22:32:55.916 |AppInfo |DET-MediaExchange-(127080)::setEOOpaqueMediaInfoForInterface, peerEarlyOfferType(0), farEndEarlyOfferType(0), h323EarlyOfferInfo(0)
57315703.005 |22:32:55.916 |AppInfo |DET-MediaExchange-(127080)::setRegionAndHonorIncomingCodecPrefForInterface, Party1: myRegion(SIN-REG), peerRegion(SIN-REG), farEndRegion(), myHonorIncomingCodecPref(0), peerHonorIncomingCodecPref(0), farEndHonorIncomingCodecPref(0) Party2: myRegion(SIN-REG), peerRegion(SIN-REG), farEndRegion(), myHonorIncomingCodecPref(0), peerHonorIncomingCodecPref(0), farEndHonorIncomingCodecPref(0)
57315703.006 |22:32:55.916 |AppInfo |DET-MediaExchange-(127080)::addPartyAandPartyB, videoCall(0), normalStart(0), audioRegion(64), videoRegion(384), party1VidCapable(0), party2VidCapable(0)
57315704.000 |22:32:55.916 |SdlSig |MXNewParentPid |restart |AgenaInterface(3,100,234,63534) |MediaExchange(3,100,138,127080) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:3,L:0,V:0,Z:0,D:0] parent pid:nodeId=3.PN=138.PI=127080.vPT=2 allow2833=F injectDigitstoMTP=F subscribetoMTP=F passthru2833=F
57315705.000 |22:32:55.916 |SdlSig |MXInterfaceRestart |restart |AgenaInterface(3,100,234,63534) |MediaExchange(3,100,138,127080) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:2,L:0,V:0,Z:0,D:0] pid=0.0.0 partySide=A mAudioRegionKbps=64 mVideoRegionKbps=384 mMulticastFlag=F silence=F network=0 sessionId=0 ipAddrType=0 ipv4=10.130.3.9 port=49839 My DTMF (config=1 support=1 2833recvPT=0) Peer DTMF (config=1 support=1 2833recvPT=0) Media DTMF (subscribe=F passthru2833=F injectDigitstoMTP=F allow2833=F) cryptocapcount=0 RSVP nPortsOpened=0 AllowedCallType=0x1 aPT=2 vPT=2 e2eAR0 e2eVR0 capE2E=F dscpRSVPFail=F mtpChanged=F allowOneWay=F my connType=3 peer connType=3 mouth mode=0 mouth party=0 ear mode=0 ear party=0 mIsSRTP=T farEndXferM=0 farEndMediaReq=0 joined=F NormalReconn=T callIpAddrMode(my=0 peer=0 far=0) moh=F mediaReq=0 mPrecLvl=5 allowVideo=F SIPDevMediaInfo: [ vidPref=T isPartyA=F stackIdx=1 SDPInBeginMedia=F isJoined=F videoP=T EO=0 renegMedi=F
57315705.001 |22:32:55.916 |AppInfo |DET-kirra-ipv6 AgenaInterfaceBase-(63534)::initializeMemberData mNegotiatedIPAddrType = 0
57315706.000 |22:32:55.916 |SdlSig |MXNewParentPid |waitReconnect |H245Interface(3,100,185,53370) |MediaExchange(3,100,138,127080) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:3,L:0,V:0,Z:0,D:0] parent pid:nodeId=3.PN=138.PI=127080.vPT=2 allow2833=F injectDigitstoMTP=F subscribetoMTP=F passthru2833=F
57315707.000 |22:32:55.916 |SdlSig |MXInterfaceRestart |waitReconnect |H245Interface(3,100,185,53370) |MediaExchange(3,100,138,127080) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:2,L:0,V:0,Z:0,D:0] pid=0.0.0 partySide=B mAudioRegionKbps=64 mVideoRegionKbps=384 mMulticastFlag=F silence=F network=7 sessionId=0 ipAddrType=0 ipv4=10.130.3.9 port=49839 My DTMF (config=1 support=1 2833recvPT=0) Peer DTMF (config=1 support=1 2833recvPT=0) Media DTMF (subscribe=F passthru2833=F injectDigitstoMTP=F allow2833=F) cryptocapcount=0 RSVP nPortsOpened=0 AllowedCallType=0x1 aPT=2 vPT=2 e2eAR0 e2eVR0 capE2E=F dscpRSVPFail=F mtpChanged=F allowOneWay=F my connType=3 peer connType=3 mouth mode=0 mouth party=0 ear mode=0 ear party=0 mIsSRTP=T farEndXferM=0 farEndMediaReq=0 joined=F NormalReconn=T callIpAddrMode(my=0 peer=0 far=0) moh=F mediaReq=0 mPrecLvl=5 allowVideo=F SIPDevMediaInfo: [ vidPref=T isPartyA=F stackIdx=1 SDPInBeginMedia=F isJoined=F videoP=T EO=0 renegMedi=F
57315707.001 |22:32:55.916 |AppInfo |DET-H245Interface-(53370)::mapRestartSignal, mDTMFProfile oobUserInputCapability=1

Could be a codec issue. Verify what codec you are trying to use when the call fails.
Is this H323 or MGCP, what is the PSTN connectivity, SIP or PRI or FX0?
Might be helpful to post the router config.

Creation of inbound delivery from outbound delivery

Hi All,
Can anybody help me, if I want to create inbound delivery from outbound delivery.
I found this function module "SHP_IBDLV_CREATE_FROM_OBDLV". But I want handling uniits to be entered by the user.
Thanks

Thanks for the feedback. This question is resolved

Having trouble with audio edit to tape, print to video ok

Hi all, please go easy on me, this is my first post.
I am having difficulty getting audio on to tape via 'edit to tape'.
The hardware is blackmagic decklink extreme, feeding component video and analoge audio to a UVW-1800P.
I can do a print to video on a crash record and the audio works that way, but edit to tape does not.
I have tried both deck link and built in audio in the audio settings and the FCP a/v settings, seperate and ganged output settings, I have set the insert settings to 2 channel Sony, reloaded the decklink drivers.
The irritating thing is the audio is there whilst cutting, but as soon as I try edit to tape there is complete silence. The important thing is that it worked a few weeks back but does not now, it must be a setting?
Thanks in advance for your help.
This machine I am working with this week is an Intel MacPro running FCP 5.1.2 and Mac OS 10.4.8
G5 Dual 2GHz-Blackmagic Decklink Pro, G3 with Sonnet G4 upgrade Mac OS X (10.4.8)
G5 Dual 2GHz-Blackmagic Decklink Pro, G3 with Sonnet G4 upgrade Mac OS X (10.4.8)

I had this same problem and this resolved it for me:
-Go to your "Settings" icon and click on the "General" tab.
-About 2/3 way down the page you will see "Use side switch to:" - make sure "mute" is checked rather than "lock rotation."
-Then make sure the side switch, located next to the volume toggle switch on the side of your ipad, is moved to the right (no red dot showing).
My audio worked fine in embedded videos after I did those two things. Hope it works for you.

Still having trouble with audio on Macbook Pro

I had posted a discussion board earlier on this issue. I've been having trouble with audio for certain videos on youtube and basically any website embedded with a video. The audio works for a few seconds that doesn't or it doesn't work at all. My volume is up, not on mute, and the one on the video isn't on mute either. It's funny because I just tried watching a video on Firefox (as opposed to Safari) and it works. Could it possible be something with the settings for safari?

Try restarting your Mac, resetting your router, and resetting your modem. My cable internet has gotten slow at times as well, and when I reset my router everything cleared up.

Send inbound IDOC as outbound(copy)

Hi,
We need to send the same inbound IDOC as outbound IDOC to the customer(they want to get a copy of it) How can we do this? We are getting inbound sales order IDOC's and the customer wants the copy of the same IDOC, not order acknowledgement. Is it possible?
Any inputs are greatly appreciated.
Sarita

I can think of following:
You create your own Process code, Function Module to update your data using Inbound IDOC and at the end generate outbound IDOC using same data and then distribute using MASTER_IDOC_DISTRIBUTE.

What is Inbound Proxy and Outbound Proxies - Client and Serv please help ?

Hi Friends ,
            <b> 1. What is exact meaning for Inbound Proxies and OutBound Proiex ?
                2. Is outbound proxies means sending message to IS ?
                 3. Is Inbound proxies means receiving message from IS ?
               4. Where exactly we need proxy ?
               5. What is Sever and client Proxies ?
                 Is server ( here servre means XI Server ? )means Inbound .
             Then normal meaning of Inbound is to from server right ? Then hwo it will bwecome as inbound ?</b>
           I have gone through many blogs but still i am not clear .Please anyboy can expalin me ?
Regards .,
Shyam

Hi Shyam
1. What is exact meaning for Inbound Proxies and OutBound Proiex ?
2. Is outbound proxies means sending message to IS ?
3. Is Inbound proxies means receiving message from IS ?
Ans ::
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
How to integrate or Establish connection between SAP XI and BIW?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da
4. Where exactly we need proxy ?
5. What is Sever and client Proxies ?
Ans ::
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies - Activate Proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies - ABAP Server Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
Proxies: are interfaces which will get executed in the application system.They can be created only in the system from message interfaces using the proxy generation functions.
The biggest advantage of the proxy is that it always by passes the Adapter Engine and will directly interact with the application system and Integration engine - so it will and should give us a better performance.
The literal definition of a proxy is an object / process authorized to act for another; an agent or a substitute. In simpler terms, proxies in the XI context are objects used to encapsulate the creation (from a sender system) or parsing of XML (at a receiver system) as well as the communication with the relevant runtime components required to send or receive those messages. The Proxy Runtime controls these objects / processes, and can itself be controlled by the applications it communicates with.
The Proxy currently has the following components available:
1. ABAP Proxy Communication using XI or Web Services
2. Java Proxy Communication using XI (J2EE)
JAVA Proxies:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
ABAP Proxies:
/people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
Just refer these links u will get the answer of ur all 5 Question
<b>Pls reward if useful</b>

In UCCE TCD table how to indentify inbound and outbound call records.

Hi
I'm using TCD table to build custom report. I would like to know is there any flag to differentiate Inbound and outbound call records in TCD table.
Please advice.. I would be much appreciated.
Thanks
Regards,
Param

Hi Geoff and David
Thanks you very much for your reply.
I have used "PeripheralID" to classify the call.
Thanks
Regards,
Param

Converting Inbound idoc to Outbound idoc

Hii,,
How to convert inbound idoc to outbound idoc.
I have IDOC -> SOAP -> IDOC Scenario.
In case of error at SOAP side , it return idoc with 51 status.
Now i need to convert the Inbound idocs to Outbound Idocs and send it back to the Sender system...
How to do accomplish this??
Regards,
Siya

Hii,
By using we19 and by exchanging sender & receiver we can convert outbound idoc to inbound idoc.
Just want to confirm is it proper way??
Regards,
Siya

What is IDOC Inbound process and Outbound Process?

What is IDOC Inbound process and Outbound Process?
can any one explain about the inbound and outbound process step by step?
Tks in advance,
Phanikumar

Hi,
Inbound means transfer legacy data to SAP system and
outbound means transfer SAP system data to legacy system.
Regards,
Prashant

7921 - no outbound audio for pots calls

I also posted this in IP Telephony. Not sure which section is more appropriate for my problem, but I really need help here.
I have an odd problem.
I have a 7921, which registers as it should in an CUCME 8.6 environment.
4 ephones, (3) 7975G and (1) 7921. One incoming / outgoing pots line. No voip.
My problem:
calls made from the 7921 to internal extensions work perfectly. Audio in both directions.
Calls made from the 7975's to internal extensions and to external numbers via pots (VIC2-2FXO) work perfectly - audio in both directions.
Calls made from the 7921 to external numbers via pots, however, have no outgoing audio. Inbound audio works fine.
Any ideas? Config is attached

Duplicate post.
Go HERE.

IPCC Enterprise: Outbound calls priority over inbound calls

How can I get outbound calls presented to the agents in SG-A even though there are calls queued to SG-A ?
My customer wish to service callbacks before queued calls.
To me it looks like the dialer doesn't issue the reservation call quick enough to get the agent reserved before the queueing mechanism is grabbing him.
Thanks
/Claus

The reason inbound calls take priority is because they are queued.
With personal callbacks, we try to reserve the agent even if it is currently busy so we have an opportunity to queue them.
With preview and predictive, we check the skill group once every 2 seconds and only attempt to reserve agents to see if there are available agents. So we won't attempt to reserve an agent if agents are busy with inbound calls. So if you have inbound calls queued up for a skill group that share the same agent pool as the outbound skill group, then those agents will likely be kept too busy with inbound calls. The Dialer won't try to make a reservation request if no agents are available and so there won't be an opportunity to add the calls to queue.
With Transfer to IVR campaigns, you can queue and route customer calls to agents. This would give you more flexibility, but there are some pros and cons.
PROS
You can make smart decisions in the routing script whether it is marked as Answering Machine or Live Voice.
You don't tie up an agent in reservation call waiting to find a customer.
You can prioritize the dialer calls over inbound calls in the scripting.
CONS
Customers will likely spend some time in queue, and may drop out.
The scripting to throttle calls is a little trickier.
The campaign reports and Dialer Detail records no longer tell you whether the call was handled by an agent or not. They stop tracking once the call is sent to the IVR. You only have the inbound call Termination Call Detail records and the inbound skill group and call type to track what happened ot the transfer to IVR calls.
David

Trying to change Inbound IDOC to Outbound IDOC for testing....

Hi Friends,
I am trying to do the following
1) In our legacy system SAP R/3 3.1H we have received an IDOC from our partner. This has been stored correctly.
2) We now need the same functionality in our SAP R/3 4.6C system so I have created the IDOC type + segments accordingly. I have also set up the partner profiles
3) We need test data but our partner can not send yet so the only other way is to send this INBOUND IDOC from 3.1H to 4.6C.
4) HOWEVER, i have tried everything to do this like using WE19 to edit the idoc, but I can not process it for OUTBOUND processing.... You can in 4.6C but there is no option in 3.1H.
HELP!! Rewards

Hi Friend,
        The test programs allow you to skip certain sections of the processing chain between applications to localize errors. However, they can also be used to simulate an entire business process (for example, purchase order on the customer side with posting of the purchase order on the vendor side) in an SAP System (without any other systems). For this reason, the test programs are an important tool for configuring the IDoc Interface and defining new IDoc types.
Use
You can use the test tool to generate an IDoc manually and send the IDoc for either inbound or outbound processing. You are not restricted to a specific port type. You can start with an IDoc type (an empty IDoc) or use an old IDoc as a template and edit the IDoc, that is, add segments or change data. This is a good way to test new IDoc types, in particular.
You can forward your new IDoc for standard inbound processing (checking partner profiles and so on). You can also call a function module directly. You can therefore test new function modules for new IDoc types.
Activities
·        Start the test tool with SAP Menu ® Tools ® IDoc Interface/ALE ® Test ® Test Tool (WE19). You can use a template for your test IDoc.
You can choose IDoc types as a template, either directly or according to a specific message type. You can use the F4 Help for IDocs used as a template, which searches for IDocs by selection criteria, in the same way, for example, to IDoc Display. When an IDoc file is used as a template, the IDocs are read from this file and are available to you for selection. A default value for the IDoc file gives you the system using your test port which you can enter in IDoc Administration . This test port must therefore be of the file type. The default file is the inbound file entered there.
·        You generate the IDoc using .
The IDoc is displayed as a tree structure. If you do not use a template to create the IDoc type, at least one more segment must be added.
·        To create segments in the form of tree nodes (colored fields) place the cursor on an existing node (for example a control record at the top) and choose .
You can cut, paste or copy individual segments or entire segment groups by positioning the cursor on the relevant segment and selecting the required action from the Edit menu.
·        Click on the white fields to change data in the segments.
In the case of the control record, only the fields which are relevant for standard inbound processing are displayed. Do not forget the required entries in the partner profiles if you want to send the IDoc for standard inbound processing! You can also change all of the control record data by choosing All fields in the edit screen.
In the All fields editor screen you must enter the non-language specific partner function (for example AG for vendor). This is the only screen in the IDoc Interface in which the partner function is not translated into your language (in English AG becomes vendor VD) - in the partner profiles or in the IDoc display the field is always translated. Thus, you see the partner functions here in the way they are saved in the database. This is a unique value in the SAP System and therefore protected against mistakes.
·        The additional procedure depends on whether you want to test inbound or outbound processing.
Test: Outbound Processing from MC
Use
Use this test program if you have chosen the Message Control module and want to test generation of an outbound IDoc from an existing message status record (table NAST).
Prerequisites
You must be able to post the application documents which are to be converted into IDocs by the Message Control module correctly so that a message status record can be generated. In the case of the Materials Management (MM) and Sales and Distribution (SD) components, the following entries are required:
·        Customer or vendor records
·        Material records
·        Info records
·        MC condition record: The output medium 6 (for EDI) must be entered here. The condition records are maintained as messages from the respective application.
The appropriate file ports and partner profiles must exist in the IDoc Interface.
Outbound processing must be stopped when the message status record has been generated to allow the test program to intervene. To do so, you must set the Message Control dispatch time to 1 (output with selection run) in the corresponding condition record in the application. This test program, therefore, is simply used to start a selection run which retrieves the Message Control records and sends them for further outbound processing. The program is report RSNAST00, which is also generally scheduled with dispatch time 1 in live operation.
Activities
Once the application document has been posted, outbound processing stops after the message status record has been generated and is triggered again by the test program. Choose SAP Menu ® Tools ® IDoc Interface/ALE ® Test ® Outbound ® Outbound from MC.
Errors are stored in the Message Control processing log (document header) and in the status records of the IDocs. The status records, however, are only available if the IDoc was successfully generated.
Use
This test program selects one or more outbound IDocs and forwards them to the external system. You can choose the IDocs according to various criteria (for example, recipient or business message).
Prerequisites
You require outbound IDocs which were generated without errors (no error status). The partner profiles, therefore, must be maintained completely.
Outbound processing must stop when the outbound IDocs have been generated to allow the test program to intervene. You can check this by setting the output mode to Collect IDocs in the partner profile for the IDoc Interface. If you now generate an outbound IDoc for the partner (for example, using the application or the test tool), the IDoc is only generated in the SAP System and is not forwarded to the external system. This test program, therefore, is simply used to start a selection run which retrieves your IDoc(s) and sends them to the external system. The program is report RSEOUT00, which is also generally scheduled with the output mode Collect IDocs in live operation.
Activities
You start the test program by choosing SAP Menu ® Tools ® IDoc Interface/ALE ® Test ® Outbound ® Outbound from IDoc (WE14).
You can decide whether the output mode is set to Start subsystem or Do not start subsystem in the partner profile. This defines whether the external (sub) system processes the IDocs further.
Use
This program is used to test whether status confirmations for an outbound IDoc are sent correctly from the external system to the SAP System. The port type here must be set to File.
Prerequisites
A correct status file which can be generated by an EDI subsystem, for example, is required. The status file must refer to an existing outbound IDoc in the SAP System. You can also generate such a status file yourself.
The sender port must be recognized by the receiving system. The port must therefore be maintained as a port of type File in the port definition for the IDoc Interface. The entry for the inbound file must also be given here.
Features
The SAP System reads the status file. The IDoc number contained in the file refers to the outbound IDoc, to which the status confirmation relates. The confirmed statuses are credited to the relevant IDoc in the form of status records in the SAP System.
Activities
Start the test program with SAP Menu ® Tools ® IDoc Interface/ALE ® Test ® Status ® Edit Status File (WE17) and pass the inbound port, name and directory of the file. These entries overwrite the standard values which you have stored in IDoc administration using the test port.
Test: Inbound Processing: Modified Outbound File
Use
This program converts an outbound file with IDocs to a correct inbound file and sends the new file for inbound processing. The outbound file is not modified and can therefore be used more than once. The port type here must be set to File.
Prerequisites
You need a correct outbound file, for example, a file which is generated by the test tool or using a standard outbound processing. In this case, a port of the type File must be specified in the partner profile for the IDoc Interface, so that the IDoc(s) can be written to a file.
The sender port must be recognized by the receiving system. The port must therefore be maintained as a port of type File in the port definition for the IDoc Interface. The entry for the inbound file must also be given here.
Features
The program imports sender and recipient data as input parameters from the user. The program reads the IDoc file and changes the corresponding entries in the IDoc control record. The changed data is written to a second IDoc file at the operating system level.
Standard inbound processing is then triggered;
·        Reading the modified file
·        Generating the IDoc(s) in the SAP System
·        Processing in the application
Activities
Start the test program with SAP Menu ® Tools ® IDoc Interface/ALE ® Test ® Inbound ® Inb. Mod. Outb. File (WE12).
Set the sender and recipient data, as well as the outbound file and the inbound file to be generated (path and name). Your entries for the inbound file overwrite the standard values which you have stored in IDoc administration.
The recipient in this case is the SAP System. The port is used for identification purposes:
·        SAP (for example RSMITH
Test: Inbound Processing: Original Inbound File
Use
This program reads an inbound file and sends the file for inbound processing. If all data has been successfully read, the file is deleted.
Prerequisites
You require a correct inbound file. In this case, correct means that the:
·        Sender and recipient in the control record are correct
·        Direction in the control record is set to 2 (inbound)
·        Client in the control record and data records are correct or empty
The sender port must be recognized by the receiving system. The port must therefore be maintained as a port of type File in the port definition for the IDoc Interface. The entry for the inbound file must also be given here.
Features
The program reads the IDoc(s) from the inbound file and sends them for standard inbound processing (with processing within the application).
The file is deleted after being read successfully!
Activities
Start the test program with SAP Menu ® Tools ® IDoc Interface/ALE ® Test ® Inbound ® Inb. Orig. Inb.File (WE16) and pass the following data:
·        Inbound port
·        Name and directory of the file
These entries overwrite the standard values, which you have stored in IDoc Administration using the test port.
Thanks

Is any one else having problems converting audio books in WMA format with the new v5

Is any one having trouble with audio books in WMA formatting converting with the new ios v5

Since updating to OS5 in my itouch I have lost all my library audio books. I have downloaded a couple of new library audio books. The books look like they are being loaded into my itouch but are not there. The only way I can access them is to make a playlist for each book and drag the numbered files into the playlist folder. There are a lot of problems with this method - book chapters are not in order (I have to tried to reorder them without success) and if I stop listening to a book, when it starts again it starts at the beginning of the chapter. Before OS5 I had no trouble with WMA files or anything for that matter. I hope there is a solution soon.

Inbound logistics and Outbound logistics

Can anyone
1).list what all processes come under Inbound logistics and Outbound logistics
2).what is Backorder processing in Inbound logistics and its implications in the business
-Pallu

1).list what all processes come under Inbound logistics and Outbound logistics
Config:
go to SPRO-MM-purchasing-Confirmation-setup confirmation control
here select the 10 and check the check box Create inb delivery
then select the line and click on the confirmation seq and make GR relevant, MRP relevant and GR assign (all three box checked)
Process Flow: -
1. ME21N - In PO, Confirmation Tab, select the confirmation control key as "Shipping Notification" or "Inbound Delivery"
2. VL31N - Create Inbound Delivery w.r.t. PO
3. MIGO - Goods Receipt > Inbound Delivery
Outbound:
Create the sale order delivery using VL01N
post goods issue

Linksys 2102 having no inbound audio on Outbound Calls

Similar Messages

Maybe you are looking for