Linksys and P2P problems?
Hi all,
I'm aware of the problems (or firmware bug) with Linksys routers and P2P software, where too many connections crash the router. I had a WRT54G v2 sometime ago and had to reboot the router twice weekly, before it died.
Well time has come for me to get a new wi-fi router for my Wii.
Have the problems been fixed yet concerning the mentioned bug with newer firmware, or should I get a router from another manufacturer.
I can't believe that a networking company, as Cisco would allow such a bug to exist for so long.
Thx
Access the setup page of the router by launching an
Browser and type on the address bar, 192.168.1.1 and press enter. When
it prompts for the username and password, leave the username field
empty and provide password as "admin" (Without quotes)
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If you are getting Ip - 192.168.1.X ...change the LAN Ip to 192.168.2.1 ....Power cycle for 3-4 minutes ...
Try going online
If still not working ...use Internet Connection type as PPPOE .... Use Username & Password provided by Service Provider ....
Click save settings....
Look for WAN IP address again under status page ....
Try going online ......
Similar Messages
-
My switch Linksys srw224g4 has problem and I need someone help
Hello,
My switch Linksys srw224g4 has problem that it keeps rebooting continuously and cannot bootup successfuly. Can someone tell me how to fix this problem? Firmware version is 1.2.2b , boot version is 1.0.2
Here is console capture:
==================
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
Device configuration:
Slot 1 - SRW24F4G HW Rev. 0.2
Tapi Version: v1.3.3.1
Core Version: v1.3.3.1
01-Jan-2000 01:01:09 %SYSLOG-F-OSFATAL:
L FATAL ERROR: ROOT: ABORT DATA exception
***** FATAL ERROR *****
SW Version : 1.2.2.16
Version Date: 20-Mar-2007
Version Time: 11:44:49
Instruction 0x121fc0
Exception vector 0x10
Program state register 0x20000013
***************** SYSTEM RESET *****************
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
DelScr fatal Error: Invalid Variant type01-Jan-2000 01:01:03 %SYSLOG-F-OSFATAL: DelScr fatal Error
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 1.2.2b (date 20-Mar-2007 time 11:44:49)
***************** SYSTEM RESET *****************
Thanks,
TienHi,
Please follow the steps in this link to reload the image:
http://www.cisco.com/en/US/products/ps9967/products_qanda_item09186a0080a36371.shtml
And this is the link to download boot code 1.00.86:
http://ip.gliebetronics.com:800/firmware/Linksys%20SRW2024/Firmware/
Hope this help. -
WRVS4400N and WPC4400N Problems
This is part rant and part problem report.I don't know who's listening, maybe someone who knows more than I do.
Let me preface this by telling you I am a reseller of Linksys products and a Linksys Partner. I have had pretty good experience with the products. I am currently installing several of their products a week. I've been doing IT support for over 12 years. I have configured a lot of routers.
So I think why not treat myself to a top of the line router and test out 802.11N at the same time.
Here is the setup:
Dell D520 with fresh reload of WinXP SP2
Linksys WRV4400N
Linksys WPC4400N
First problem was I installed the card with the CDROM it shipped with. Big mistake. The driver and utility would not connect when WPA was configured. Ok my mistake, always download the latest drivers.
Second problem was my HP2600n that is connected to the router was unable to get print jobs. It was connected on the LAN, could ping but print jobs would fail, more on this later.
Third problem is that my wife could no longer get connected to her corporate VPN over this router. They use a Cisco VPN solution. Yes, VPN passthrough is enabled. Hey it worked fine on my WRT54G! She has a dell D630 with an Intel Pro 2200 WLAN card. It worked PERFECT with the WRT54G.
Fourth problem is the wireless connection would periodically disconnect.
Fifth problem is that I pulled the WRVS4400N and reinstalled the WRT54G and now the Linksys WPC4400N has a fluctuating signal level. The router is in the next room and with my build in Dell WLAN card the signal stays strong.
Yes, I upgraded the firmware on the router to the latest version.
IN regard to problem number two, it turns out the WRVS4400N uses 192.168.1.3 for the WLAN interface. That was the same IP I had on my printer. OK, now you all know that you need to resever 192.168.1.3 on your LAN if you use a WRVS4400N
IN regard to number three, no amount of tinkering allowed the Cisco VPN client to connect. I changed MTU size, turned off the firewall, added port triggers, you name it. Nothing worked but replacing the router. Now this is just supposed to work. I should not need to be a network engineer to make a WRVS4400N work. VPN's are supposed to pass through!!!
In regard to number 4, periodic dropping of Wireless, connection, I tried going to channel 1, even removing wireless security. Nothing seems to work except revert to the Dell WLAN card. This issue was seen on the WRVS4400N and the WRT54G. Acutally worse on the WRT54G and WPC4400N combination. I also noticed my Dell card was picking up about 10 WLAN's in my neighbor hood and the Linkys only 2.
So there is a special support phone number for partners. I waited for 55 minutes on hold and did not get an answer.
One Disapointed Linksys Reseller---- quote "cmartell" ----
Fourth problem is the wireless connection would periodically disconnect.
In regard to number 4, periodic dropping of Wireless, connection, I tried going to channel 1, even removing wireless security.
---- end quote ----
I have a WPC4400N PCMCIA card, and I am having this same exact problem too. I am using drivers 1.0.2.5, which also carries the designation of "Lite" - what the heck is up with "Lite" anyway? I want the full blown drivers!
Anyway, I can't seem to stay connected for too long, even though my router (ALSO a Linksys product, a WRT350N, with updated Linksys firmware 1.03.7) is only 4 feet away, if that.
My wireless card (the WPC4400N) keeps dropping connection, even if the router is right next to it! And of course, when I had my wireless router all the way across my apartment (roughly 20 feet) it would keep doing the same thing too, kept disconnecting periodically! Any kind of adjustment to driver parameters in my network card settings would just simply not help it at all, and I don't know what the problem is!
Can anyone please help?
My brother is a CISCO C.C.I.E. (Linksys is owned by Cisco), and I have yet to ask his help, but somehow I doubt even he could help me with this one.
I should not have to change my channel #, nor my security method, in order to keep a connection, especially when it has problems while the PCMCIA network card is being only 3-4 feet away from the router!! -
Linksys wifi connection problem
I have a strange issue here. I cannot connect to any OPEN linksys wifi router. If the router useses WPA or WPA2 I can connect without prboblem. I've tried it with my home linksys router and I get the same results. I used to be able to connect to any OPEN linksys wifi without problem. It suddenly stop working and now I am not able to connect to any linksys OPEN wifi anymore. Other branded OPEN wifi connections (no problem)
Is there any "*.plist" file(s) that I can delete and reset the airport back to default ? This happen before the 10.4.8 update. Even after the 10.4.8 update, I still having the same problem.What is the Model no of the Router ?
Are you able to go online with another wireless computer ?
Try to lower down the security to WPA or WEP then,try to connect the wireless network.If still doesn't work then,upgrade the router's firmware and reconfigure it... -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
A new IMac, old xp pc, Linksys and a new Hp All in one...now what?
Someone please point me in the right direction. I need to share all the functions of the HP all in one, printing and scanning with my new mac and old xp PC. Sharing files will be nice as well. At this point all will be hardwired. I may add a PC notebook wirelessly in the future. The Imac and the pc are hardwired to the router ( Linksys WRT54G Version 2). At this point I can access the internet fine. The printer HP CM1312nfi MFP is still in the box.
What do I do next. My router is out of warrantee and Linksys will not help. Apple care tells me to call Linksys and HP says the same.
I need a simple step by step guide that I can understand. I have been searching the internet for days and I simply give up?
Please help.
Thanks in advance!
Message was edited by: soundman5000I can't help with your proposed network stuff, but Camelot addressed that. Once you've gotten that taken care of, see these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
MacFixIt Tutorials,
MacTips, and
Switching to the Mac: The Missing Manual, Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac. -
BOSD, Battery issues and Heating problem after iOS 8 upgrade
i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.
The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV -
I am making code to try to make a game and my problem is that my code......
I am making code to try to make a game and my problem is that my code
will not let it change the hit everytime so im getting the first guy to hit 1 then next hits 8 and so on and always repeats.
Another problem is that I would like it to attack with out me telling it how much times to attack. I am using Object oriented programming.
Here is the code for my objects:
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class rockCrab {
//Wounding formula
double sL = 70; // my Strength Level
double bP = 1; // bonus for prayer (is 1 times prayer bonus)
double aB = 0; // equipment stats
double eS = (sL * bP) + 3; // effective strength
double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640)); // my base damage
//Attack formula
double aL = 50; // my Attack Level
double eD = 1; // enemy's Defence
double eA = aL / eD; // effective Attack
double eB = 0; // equipment bonus'
double bA = ((eA/10) * (eB/10)); // base attack
//The hit formula
double fA = random() * bA;
double fH = random() * bD;
double done = rint(fH - fA);
//health formula
double health = floor(10 + sL/10 * aL/10);
rockCrab() {
void attack() {
health = floor(10 + sL/10 * aL/10);
double done = rint(fH - fA);
fA = random() * bA;
fH = random() * bD;
done = rint(fH - fA);
System.out.println("Rockcrab hit" +done);
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class self {
//Wounding formula
double sL = 1; // my Strength Level
double bP = 1; // bonus for prayer (is 1 times prayer bonus)
double aB = 0; // equipment stats
double eS = (sL * bP) + 3; // effective strength
double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640)); // my base damage
//Attack formula
double aL = 1; // my Attack Level
double eD = 1; // enemy's Defence
double eA = aL / eD; // effective Attack
double eB = 0; // equipment bonus'
double bA = ((eA/10) * (eB/10)); // base attack
//The hit formula
double fA = random() * bA;
double fH = random() * bD;
double done = rint(fH - fA);
//health formula
double health = floor(10 + sL/10 * aL/10);
self() {
void attack() {
health = floor(10 + sL/10 * aL/10);
fA = random() * bA;
fH = random() * bD;
done = rint(fH - fA);
System.out.println("You hit" +done);
}Here is the main code that writes what the objects do:
class fight {
public static void main(String[] args) {
self instance1 = new self();
rockCrab instance2 = new rockCrab();
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
}when the code is run it says something like this:
you hit 1
RockCrabs health is 9
RockCrab hit 7
your health is 38
you hit 1
RockCrabs health is 8
RockCrab hit 7
your health is 31
you hit 1
RockCrabs health is 7
RockCrab hit 7
your health is 24
you hit 1
RockCrabs health is 6
RockCrab hit 7
your health is 17
my point is whatever some one hits it always repeats that
my expected output would have to be something like
you hit 1
RockCrabs health is 9
RockCrab hit 9
your health is 37
you hit 3
RockCrabs health is 6
RockCrab hit 4
your health is 33
you hit 2
RockCrabs health is 4
RockCrab hit 7
your health is 26
you hit 3
RockCrabs health is 1
RockCrab hit 6
your health is 20
Edited by: rade134 on Jun 4, 2009 10:58 AM[_Crosspost_|http://forums.sun.com/thread.jspa?threadID=5390217] I'm locking.
-
A rather odd and annoying problem has recently been occuring on my MBP. A couple days ago my remote (after working without fail for over a year now) suddenly stopped working. Yesterday night and this morning it started working again but after a while it stopped again. I've read dozens of support articles which haven't really helped because there seems to be another problem.
Most articles have stated that there is an option to disable the IR receiver in the "security" window under system preferences. When the IR and remote are not working this option disappears but when they are working the option is present. I have also tried replacing the battery without any result.
I am now thinking that it might have something to do with heat buildup because it is mainly occuring after the laptop has been on for about a half hour, so I am going to try to borrow someone's fan.
If anyone has any suggestions to solve this I would appreciate it if you could help. Thanks!
MacBook Pro 1.83 GHz Mac OS X (10.4.9)check out this thread. Seems to be the same problem.
http://discussions.apple.com/thread.jspa?messageID=4701905� -
LG Ally text message and gps problems
hello. ive been with verizon for about 10 years maybe. ive been overall happy with the service and customer service. but the prices should be alot lower.lol. i started out with the motorolas then switched to the lg phones. only problem with the motorola was the speakers. not loud enough. could never hear the phone ring. the lgs usually suffer from the same problem.
i had a few phone problems but nothing like this lg ally. im on my second one and about to be my 3rd one in about 3 months. 1st phone i had every problem under the sun. this phone i am suffering from text message problems and gps problems. i suffer from what everyone else has problems with. the messages wont send. they will eventually lock up. it will show the envelope with the red explanation point ( i think thats the graphic). then usually everytime when i sent a text the texts will close. it will send then bounce back and show up as a draft and i have to resend it and wait for it to go thru. finally the last problem with the texts. when i send a text a phone number from my contacts shows up and freezes on the screen. its in white text with a black background. its the same number every time. it stays on the screen until i restart or pull my battery out.
gps. when i open up google gps that comes with the phone i make sure the gps is on... when the directions are found and the map pops up 9 out of 10 times it just keeps saying searching for gps. the turn by turn never is found. the 1 time it does it takes a good 10 minutes to be found. atleast on my first one ally the gps did work 8 out of 10 times. it just took a good 5-10 minutes for gps to be found and show turn by turn.
anyone else have these problems? where you able to fix them or did you need to get a new phone? the 2.1 update was supposed to fix problems. i think they just made it worse. the ally is supposed to have 2.2 froyo. where is it. is it ever going to get it. i got this phone because i like the lgs and the keyboard. also the sales representative on the phone was giving the lg ally rave reviews. why couldnt he say dont buy this go with a motorola droid. this phone is the biggest junk ever madeI do apologize you are having trouble with your device I looked in our information system on the LG Ally in reguards to issues you are having it states if you have the Free Droid Security anti virus protection application down loaded it will cause the phone to lock up or freeze. Check and make sure you do not have the application on your device. Check you GPS settings and make sure correct. Go to Settings; Location & Security; make sure GPS is on wireless network. If this does not fix issue you can try doing a Master Reset on your device. Make sure your contacts are saved in your G-mail account or through Back Up Assistance.
Master Reset/Soft Reset:
Factory Reset option 1
From the main screen, touch menu tab
Touch Settings
Touch Privacy
Touch Factory Data reset
Touch Reset Phone
Warning: This will erase all data from your phone, including:
Your Google account
System and application data and settings
Downloaded Applications
It will not erase: Current System software and bundled applications; SD Card files, such as music or Photos
Factory Reset option 2 - Warning this will reset device back to original factory settings.
Turn off the phone
Press and hold "home" + "end" + "volume up or down" keys together for a few seconds when the device is power off
Once device displays boot information, release keys.
Soft Reset
Press the Power key.
Touch Power off.
Touch OK.
Press the Power key to power on the device.
or
Remove battery cover, remove battery and reinstall.Also there is a new update for LG Ally it will be the Froyo 2.2 but there is not release date available at this time it will post on your device when available. Hope this Helps. Leslie -
i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!Hi b,
Have you restarted yet? -
I have an Ipod video 30g that says Please wait very low battery. I charged it for about a day and the problem persists. I've tried using some solutions on the internet and none of them worked including: holding the menu and select, holding select and play to put it in disk mode with no avail. Is there anyone who can help me!!!
Have you read this post written by another forum member?
The Sad iPod icon.
However, as your iPod was purchased on Boxing Day, why not get it serviced under the warranty?
You can arrange online service here.
Service request.
Or if an Apple store is near you, take it there and have them check your iPod.
You can make an appointment by using this link.
Genius Bar Appointments. -
It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!
Hi Vmanfromusa!
It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
I bought a song in ITUNES and had problem downloading it. I contacted support and they downloaded the song for me. Now when I try to play the song, I get a message saying my computer isn't authorized to play it. I try reauthorizing but that doesn't work, just keep getting the same message. Can anyone help?
Hello
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Best of luck,
Mario -
Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying. iPhone remote app works just fine. Any suggestions?
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...
Maybe you are looking for
-
I have recently moved house and had such an awful experience moving my BT service with me. I was on Fibre at my old place and called the house move team and gave them a months notice to switch the service. The only issue I would have would be no fibr
-
Under Flash Player 10.1 on Windows, we are suddenly getting an error that did not occur under player 9 or 10, and does not appear in any version of player on Mac. The biggest problem is that the entire error stack is inside the Flash framework, init
-
Hi experts! I have a Time dimension with next members: Year--> INT-----> Exemple: 2011 Quarter-> Char--> Exemple: Q1/11 Month-> Char --> Exemple: January Day-> Char ------> Exemple: 1 January Date-> Date ---> Exemple: 01/01/2011 When I try to get a r
-
Unable to connect to the server - windows sockets
//////socket connector method//// bool SocketConnecter::connect(const std::string& ip, size_t port) size_t uport = htons(port); std::string sPort = toString(uport); // Resolve the server address and port const char* pTemp = ip.c_str(); iResult = geta
-
Audio Capacity Bar showing full, but Free Space says 52.30 still...
Kind of hard to explain, but in the Summary View of mu iPod, the Audio Capacity says 1,712,986,856 then some garbled characters, then the Vido says 8.45 GB, photos 196.3 MB and again, free space is at 51.30 (it's an 80 GB video). The bar is all blue,