Linksys befw11s4 wifi

Help Plis
I have a Linksys befw11s4
But the router only a part, the computer that is connect with a cable hace internet connection , if i try connect any computer with a cable works ok, But when i try to connect to the wireless conection that dont work,i upgrade the firmware, i try using no password in the wireless conecction and using password, I see the router with the name i put in the notebooks but i try to connect and never have internet
plis help me
Thanks
sorry for my english

HI....
When you are connected wirelessly to the wireless network What is the IP address that you are getting on the computer?
Are u able to ping the router after connecting to it wirelessly.

Similar Messages

  • Linksys BEFW11S4 v4

    Hi,
    I have a Linksys BEFW11S4 that works just fine, or so I think. Currently there are 2 desktops and a PS3 connected to the router via cat-5. One desktop has Win Vista/Win 7 (both 32-bit Home) installed and the other desktop has XP Home. I recently got a Dell N5010 laptop with Win 7 Home 64-bit installed on it. I'm trying to set up the wireless network so I can use the laptop upstairs, but after setting up WEP and WPA, I can either NOT connect to the internet on the laptop, or when I do connect, the desktop with the dual OSes gets kicked off the internet, then the laptop disconnects, and I have to reset the router in order to get online with the desktop. I've searched everywhere for a solution. Everything is set to obtain an IP automatically, I've tried doing manual configuration, I've made sure firmware for the router is up-to-date, all network adapters have the latest drivers, I can use the laptop when it's wired to the router. The laptop has an Intel WiFi Link 1000 BGN adapter installed. Drivers are the latest, status says it's working properly. Like I mentioned before, I can use the laptop and everything else wired to the router when security is disabled, but I, personally, do not want my network unsecure.
    Any help would be greatly appreciated!

    Yes, I am able to connect without any problems when the network is unsecure. Setting the security to WEP worked. The last time I tried that, it kept saying Limited Access, so that was probably user error and me not putting the code in correctly. Firmware version is 1.52.03. There aren't any other wireless devices on the network since the PS3 is connected to the internet via a cat-5 cable.
    Is it safe to use WEP instead of WPA?

  • MacBook keep disconnecting from LinkSYS WAG325N WiFi Modem/Router

    Hello,
    I've been using my MacBook for a really long time. Over 1.5 years I had no Wi-Fi connection problems until my US Robotics 9106 Modem stopped working. I bought a nice LinkSYS WAG325N Modem. From that moment on, my MacBook started to disconnect from LinkSYS's WiFi constantly. I used every wep/web2 etc. security protocols possible. Nothing worked.
    With my US Robotics I used MAC Filtering which worked perfectly. I did the same settings to LinkSYS as you can guess that didn't help at all...
    I did firmware update to my modem, it even got worse so I downgrade my modem to previous version.
    I read almost every forum out there, no one has came up with a solution.
    If anyone has any idea how to fix this problem, please do so, I need urgent help or else I need to take my modem back before 15th day of using it is over. And try to find some modem that my MacBook would like...
    Thank you.

    Hello,
    Yes I tried with US Robotics, worked perfectly.
    It worked at all caffe's wifi spots (I have no info about their modem/router)
    Strange enough, I realised that, if I place my old wifi modem next to this one just connecting the power and turning the modem on, somehow macbook connects fine !? it is too weird, and nearly impossible to explain. but if I place these two modems together and connect with linksys, and the other is just on, no connection no nothing just its wifi is on, MacBook connects... but if I leave the room and go to the living room the problem occurs again.
    And since all the other windows laptops connecting from living room has %85 signal power this modem is wonderful. But for a MacBook, it is nothing but pain.
    If I get a chance, I'll ask a friend to bring his macbook here which is newer (core2duo) mine is core duo and see what happens.

  • Linksys befw11s4

    I am trying to figure out if I can use an Airport Express (the $99 dollar thing) with my wireless Linksys befw11s4 to stream music from itunes in my Windows XP Pro laptop. I cant seem to find a strait answer on the web. I am not sure if it is becuase the Linksys rounter is old or what. itunes, linksys, and xp are all so popular someone must have figured out how to do this. I spoke to someone at the apple store who said it could be done but he did not know how. I am looking for some relitivly clear instructions.
    Maybe I am searching for the wrong thing terms but cant seem to figure out it it is possible and how to do it with this set up. I dont know why it is not as easy as conecting the linksys router to the airport router with a cat5 cable and then the airport router to my stero.
    Any help would be appreciated.

    Do I need to log into my linksys router and do anything?
    No
    2)It only allows computers with listed MAC addresses.
    OK, you will need to make a change. The best solution is to disable this feature since it offers no real security. If you don't want to do that, you must add the MAC address of the wireless interface of the AX to that list.
    3)does not broadcast its name (i thnk this is called SSID).
    This doesn't have to change. However you should be aware that this offers no security. The SSID is still broadcast between the base station and any connected clients. Therefore it only takes a few seconds to find the SSID and access your network.
    Sometimes this option does cause problems with wireless connections.
    If you want to secure your network, forget about hiding the SSID and MAC address filtering. Use WPA2 or WPA with a non-dictionary password... if your wireless devices support it.

  • Linksys BEFW11S4 v2 game issues

    Here is my spcific problem:
    I am now connected through a port in the back of the linksys BEFW11S4 v2 because I know wireless will not work on this game. I want to play the folowing game: Asheron's Call:Throne of Destiny but when I load up the game it seems to stop when loading the Update blue bar. I have tried fowarding ports (9000-9013) and all but it still does not work. Am I missing anything or is this game not able to work with this router.. or what? I am really running out of options here, someone please help! Thank-you Linksys Comunity Members!

    Beefteck wrote:
    Here is my spcific problem:
    I am now connected through a port in the back of the linksys BEFW11S4 v2 because I know wireless will not work on this game. I want to play the folowing game: Asheron's Call:Throne of Destiny but when I load up the game it seems to stop when loading the Update blue bar. I have tried fowarding ports (9000-9013) and all but it still does not work. Am I missing anything or is this game not able to work with this router.. or what? I am really running out of options here, someone please help! Thank-you Linksys Comunity Members!
    try setting up the MTU to 1400...
    *just a thought*
    Yesterday is history. Tomorrow is mystery. Today is a gift.

  • Linksys befw11s4 v4 password won't change

    I cannot change the password on my linksys befw11s4 v4.  I go to the screen to change it, I type in the new password and reenter/confirm and select apply, then it tells me that changes are successful and it will reroute me back to the previous page in 5 seconds.  When it goes back to the previous page, the password hasn't changed and I haven't successfully secured the router.  It's still showing the router as unsecured.  Any suggestions?

    Clear your browser's cache, turn off any software firewall and try again. You can also try doing it on a different computer.
    The box said windows xp or better... So I installed Linux!

  • Linksys BEFW11S4 Power Problems

    I have a Linksys BEFW11S4 router and the power doesn't work and the lights don't even light up.  Any thing I could do to get it working again?
    Thanks

    Check your power adapter as well. 
    "Don't fix it if it ain't broken."

  • Can't connect to my linksys befw11s4

    i have an existing wireless router in place at home and all of a sudden one of my laptops can't connect to my linksys befw11s4 router. I can connect my other laptops and desktop with no problems. I have rebooted my router and cable modem several times to no avail. When I look at my connections on my dell inspiron 125 laptop, running vista home premium, it shows up as local access only. I have disconnected it and reconnected with no success. Any ideas?

    Open the router setup page,click on the status page and note down the dns1 and dns2 no.On the laptop,assign the static dns under WAN and restart the computer...Now,check.

  • Linksys BEFW11S4 version 3.2 need help finding software setup

    Hey i have a wireless access point router its older and i lost the software disk and the support page on here only has firmware ugrades it had a setup wizard but everytime i download it and launch it it brings up a firmware upgrader      the router is the linksys BEFW11S4    version 3.2     if any1 knows where i can find the software to install it to my computer please help me find thanks

    Don't worry if you have lost the disk, you can configure your router manually...You can set-up your router manually by entering it's default ip address, 192.168.1.1, no username and default password is admin...

  • Linksys BEFW11S4 v2 with a NETGEAR RP614 v3

    I have a Linksys BEFW11S4 v2 with a NETGEAR RP614 v3.
    My setup is my Cable modem, into my NETGEAR RP614 v3, and everything works perfectly fine. I got a Linksys BEFW11S4 v2 and updated its firmware from the linksys server.
    Now,
    I'm hooking the Linksys into the NETGEAR router (ethernet) and using the Linksys wireless to connect my laptop to the entire network.
    (My PC desktop is running XP Home and my Laptop is running Windows Vista Home Premium)
    My laptop can go online perfectly fine wirelessly, and the signal and everything seems perfectly fine. My problem is however, my Laptop can't see the computers on the NETGEAR router. (The Linksys acquires the correct IP and Domain and everything from the NETGEAR however).
    I've set the network discovery and all in Windows Vista to on, however it can't see the computers still. I've even disabled the Firewalls at one point on the desktops.
    However, Itunes finds the SHARED music files and stuff from the NETGEAR computers. And when I ran Diablo2, with TCP/IP I could connect to a game hosted by a NETGEAR computer, yet when I hosted, they couldn't connect to me behind the Linksys.
    Anyone think they can help ?
    Thank you for your time,
    Charles Louis

    That's because they belong to different networks: I think it goes this way...
    Netgear usually operates under the network IP of 192.168.0.x while Linksys operates under network IP of 192.168.1.x ......... now if you want to do file and printer sharing on all your PC's... have them belong to the same network by doing the ff:
    ► change IP of the BEFW11S4 to 192.168.0.x (preferrably 50)
    ► disable the Linksys DHCP server
    ► connect the Netgear to port 1 of the Linksys router
    This would make in effect your BEFW11S4 just like a wireless switch.

  • Linksys smart Wifi error while deleting offline device from device list

    i have Cisco Ea4500 with linksys smart wifi, each time i try delete offline device i get error message.
    anyone can help?

    What browser did you use in deleting offline devices? Are you doing it under the Device list? If yes, normally it should be deleted because those are widgets only. Can you try your other browsers? And do it on the main computer.

  • Ea3500 linksys smart wifi reboots every 5 secs

    can not connect my ea3500 (v1.1.39....) with linksys smart wifi from iphone 5s iOS 7.1.2 it reboots every 2-5 secs endlessly
    also can not connect it from the web via latest firefox and IE after input in my login and password the circle spins endlessly
    reboot doesnt help, only restore
    tired of restoring it
    does anyone have this problem? maybe new sw is needed?

    Ok so the router is ok but the app on your iphone reboots? Have you done a full power off on your phone lately? If that doesnt work try a reboot on your iphone. 
    Begin by holding the sleep/wake button at the top right of the device and the Home button at the bottom center of the face at the same time.
    Hold them both until you see the screen go black. In some cases, you may need to keep holding them even after the red power-off slider appears. If it appears, just keep holding it
    Wait until the silver Apple logo appears.
    When this happens, you can let go - the iPhone is rebooting

  • Linksys Smart WiFi doesn't support IE11

    Has anyone had trouble accessing Linksys Smart WiFi with IE11. I keep getting browser not supported and it won't let me in. I can't even get in using the routers IP settings.

    This was my fix! I downloaded Mozilla FireFox, installed and it worked great with Smart WiFi. I then tried IE11 again and guess what? It worked like a charm and is still working. Go Figure!

  • Port used for Linksys Smart Wifi

    Good day,
    Please i would like to find out the port used for Linksys Smart Wifi Login via the Internet. I have blocked alot of ports on my router and i am not able to login via the Internet again.

    Blocking unknown isn't normally required because the router firewall does that normally. Blocking specific port is good but you need to know what they are used for. UPnP devices will open ports as needed if you have UPnP enabled on the router.
    Sorry I don't know the specific ports or process remote access uses. I sure it's a dial out feature and not a dial in.
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • SB6121 modem & Linksys BEFW11S4 router compatability?

    I know it's an old router, but after upgrading my service to 30mbps, I only get about 5mbps even with the direct wired hookup from the router. I get ~25mbps with the router removed, so the modem is working OK. I checked for the firmware upgrade, and I already have the latest installed.
    Since this router is a 10/100, I think I should do better, at least with the wired connection (I may have to put up with slower speeds on my wireless connection with the laptop). Is there something I can do to realize the potential of my new ISP account?
    Win Vista
    Linksys BEFW11S4 router
    Motorola SB6121 modem

    Buy a new router and put the Linksys BEFW11S4 out to pasture.
    http://community.linksys.com/t5/Wireless-Routers/Unable-to-hit-30Mbps-with-Lynksys-BEFW11S4/td-p/416...
    You're spending hundreds each year on internet service and now you have a fast service. I think you need a router with a big CPU.
    http://www.smallnetbuilder.com/

Maybe you are looking for

  • FPGA Code Generation fails with error codes 7 and -1

    Hi all, I have been having a weird issue with my LV FPGA compilation in the last couple of days, no matter what I try to compile LV fails to generate the FPGA code files and returns with errors 7 and -1 and complains that the file is not found. This

  • HELP! Illustrator CC Effect Stained glass issue

    Hello. I'm relatively new to Illustrator. I'm designing a pair of shorts and have come across a problem. I'm using the stained glass effect to give the shorts a reptile look over a gradient green to black 90 degrees. When I select the stained glass e

  • BPM Process As a Web-Service Username and Password

    Hi all, We have exposed a Process as a Web-Service WSDL to another system . We use Username Token Profile to enter the username and password to connect to the Web-Service.. Now what we do is we have a role in our project and we create a dummy Web-Ser

  • Lion Server Address Book vs. iCloud

    I'm happy with iCloud with only one, big exception: Address Book. I have 5600+ entries (growing) and managing large groups with Adress Book/iCloud always gives me pain but I need to have my contacts library sinchronized between Mac-iPhone & iPad. The

  • 11.1.1.3 to 11.1.1.4 Hyperion Reports

    I am right now migrating from 11.1.1.3 to 11.1.1.4 and I am facing a series of troubles while moving the reports. The OS is also different . its from 2003r2 to 2008 r2. 1. Some Reports give the n/w error while running. It seems to still point to the