Linksys & AirPort Express; Can i do this?

I have a Linksys WRT54G.
What I would like to do is setup a Airport Express and conect it using a CAT-5 to a Windows PC. Then have the Airport Express communicate with the Linksys so the PC would then have connection to the Internet.
Is this possible?
TIA
~ Brian
iMac Intel 20" 2Ghz Mac OS X (10.4.4) 2GB ram, 256MB vid ram

Thanks for taking the time.
Actually, right know I have an out-of-the-ordinary setup.
I have (of course) the Linksys router. In the house 2 of the PC on the network are each connected to a WAP54 from their internal 10/100 NIC to the WAPs that are configured as to bridge mode. Basically the WAPs are acting as over-grown wiress NICS.
This configuration worked great in my old house where the construction was slightly different and the and the distance between the router and the WAPs wasn't as great.
Linksys wireless are great products as long as you don't have any obstructions. You know, like those silly wall things ;~)
So, I'm wondering if I can replace the Linksys WAPs with Airport Express and get a better signal. I just thought I ask first before dropping $130 on each device.
Thanks again!
Brian
iMac Intel 20" 2Ghz Mac OS X (10.4.4) 2GB ram, 256MB vid ram

Similar Messages

Airport Express - Can't print from one of 3 machines

I have an Airport Express connected to a Brother HL-5140. I can print successfully from my MacBook and a Windows XP/SP2 desktop using Bonjour. One laptop won't print - also XP/SP2.
Using a Linksys 54Gbit router with 64 bit WEP - all else appears normal.
Bonjour installed on all 3 computers. It sees the printer - installs with no errors. Firewalls (Windows and PCcillen) turned off. On LapTop, I try to print and the document fails to print. My Mac and Desktop succeed admirably.
Uninstalled and reinstalled Printer Driver, Bonjour and Java SE. Same result.
Any ideas - I am at the end of my feeble resources?
MacBook Windows XP Airport Express, Windows
MacBook Airport Express, Windows
MacBook Airport Express, Windows

any luck on this? I have pretty much the same situation - hp 5650 printer, airport express, mac mini, macbook (both 10.4.8) and an HP laptop (xp sp2) pc laptop initially printed like a champ - then, stopped - just get the message "This document failed to print".
reinstalled bonjour on the pc, installed airport admin utility on the pc. removed printer drivers, used the appropriate driver, used generic driver - just does not work. Macs are sailing along.
dang.

I have an Ipad and Iphone but I don't have an Airprint, only a WIFI printer,my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ?

I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.

Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device.

After updating Time Capsule to 7.7.2, Airport Expresses can no longer connect

After I update the Time Capsule firmware to 7.7.2, my three Airport Expresses can no longer connect to the Time Capsule (their orange lights blink and they appear inaccessible in the Airport Utility). When I downgrade, they are able to connect fine.
They are connecting to the Time Capsule over my 5GhZ wireless network.
Any help?

Hi yonajon!
I have some resources for you that may help you resolve this issue. First, here is an article about addressing the blinking amber light:
Wi-Fi base station: Understanding and resolving a blinking amber status light
http://support.apple.com/kb/ts1589
If you are still having issues, you may need to reconfigure your extended wireless network:
Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n)
http://support.apple.com/kb/ht4259
Take care, and thanks for visiting the Apple Support Communities.
-Braden

AirPort Express - Can not connect to "extended" AirPort Express

Two trips to the Genius Bar tell me that I should be able to Extend my network from a new AirPort Express (n/g/b) to an older AirPort Express (b/g) using the "extend network feature". The two devices are communicating (both lights are green and the wireless channel will change on the remote device if I change it at the base station), but my MBP Core Duo 15" seems to only be connecting to the AirPort Express Base Station (n/g/b) and not to the Remote "extended" AirPort Express (b/g).
This forum seems to indicate that you can only use WDS between the newer AEX (n) and the older AEX (b/g) but the folks at the Apple Store have told me twice now not to use WDS. They said that as long as the two devices have green lights that it is working, but when I click on the Airport Symbol up in the menu bar w/the Option key it tells me the MAC address of the base station only - and when I get very far from the base station, the signal drops out even though the remote AEX is near by.
I did try setting it up using WDS and that works fine, just very slow.
Anyone know if there's a way to be sure that my MBP connects to the remote (extended) AirPort Express?

This forum seems to indicate that you can only use WDS between the newer AEX (n) and the older AEX (b/g)
This is correct....since the older b/g Express does not even have a setting to "extend a wireless network".
If you require confirmation, open AirPort Utility, select the b/g Express, click Manual Setup
Click the Wireless tab below the row of icons
Now look at the available settings for Wireless Mode.
"Extend a wireless network" is not there.
but the folks at the Apple Store have told me twice now not to use WDS.
They are likely telling you not to use it because the performance on your network will drop dramatically if you do use WDS. Or, they mean well, but they are just wrong on this subject. Here's why:
The only way that you can use an older "g" and newer "n" device together to provide more wireless coverage is to configure both devices for WDS. It's a Catch 22.
WDS operates only at "g" wireless levels. So when you configure the newer "n" Express to operate as part of the WDS (which you must), it becomes a "g" wireless device. You lose any "n" capability on the network
Worse still, every "remote" or "relay" in a WDS setup cuts the bandwidth of the entire network in half...50%. That's huge. In effect, with WDS, you may have a bit more wireless coverage, but you will have a "g" wireless network that operates at half speed.
but when I click on the Airport Symbol w/the Option key it tells me the MAC address of the base station only - and when I get very far from the base station, the signal drops out even though the remote AEX is near by.
The remote AX is not providing any additional wireless coverage.
They said that as long as the two devices have green lights that it is working
Nope, as you can tell by the fact that your "remote" is not providing any additonal wireless coverage.
Anyone know if there's a way to be sure that my MBP connects to the remote (extended) AirPort Express?
Your only option, (unless you add more hardware):
Configure both AX devices to "Participate in a WDS network" setting one up as a "main" and the other a "remote" . The big downside, as mentioned previously, is that you will have a "g" wireless network running at half speed.

If i have a home full of Apple TV's and Airport Express' can i airplay music in every room at the same time?

If i have a home full of Apple TV's and Airport Express' can i airplay music in every room at the same time?
Or just one device(room) at a time?
It seems there is a lot of home theater systems where they all hook up to one "control" and then disperse to the different locations per instructions..
Is this possible with all apple products?

From iTunes using Multiple Speakers (you can control with the Remote app on iPhone/iPad too), but not from AppleTV itself.

Airport Express can only extend network, not create new one. Why?

I am sharing a flat with some friends. The shared broadband router is placed in the living room. To strengthen the signal and make it easier for me to manage, I bought an Airport Express, connected it to the shared router with an ethernet cable and set up a wireless network of my own in my room. It was working fine, until recently we renewed our broadband contract. The router had been replaced by a new one (I don't know why) and the network configration had been changed. Since then I was not able to use my own network. In the Airport Utility display, the light of Airport Express is green, but the light of Internet is yellow, and the status is disconnected. I tried to change various other configuration on the Airport Express, and all in vain. Until I switched the network mode from 'Create a new wireless network' to 'Extend a wireless network', the Internet connection was finally back online. But this merely extends the existing network and not what I want. Why this happens? Why my Airport Express can only extend a network, not create one?

Here is the situation on my Airport Express.
If I choose to extend the existing wireless network, the Airport Utility shows like this:
If I set up a wireless network of my own, what I get in the Airport Utility is this:
See my problems here? The Airport Express does not show anything in amble, but the Internet complains that there is no connection.
This problem did not occur before the broadband was renewed and the rounter was replaced.

Airport express can't extend wireless network

Airport express(A1264) can't extend wireless network. It seems that Airport express can't find my home Wi-Fi network. Amber light is blinking, and AirPort Utility of MacBook also can't find Airport express.
If AE is connected with TC via LAN cable, amber light is blinking with message "Wireless Network" (This Airport base station is set up to join a specific wireless network that can't be found...)
It was successful only once, but all failed after that.
Is there solution for this problem?
[My system]
Time capsule 4th generation
Airport express 1st generation (A1264)
[Settings]
Time capsule (ethernet connected)
- Create a wireless network
- 802.11a/n - 802.11b/g/n (Automatic)
- 2.4GHz / 5GHz Channel (Autmatic)
- WPA2 Personal
Airport express
- Extend a wireless network
- WPA2 Personal
- 2.4GHz Wi-Fi network name and Password is set up

If AE is connected with TC via LAN cable, amber light is blinking with message "Wireless Network" (This Airport base station is set up to join a specific wireless network that can't be found...)
Sorry, I misunderstood what you wanted to do.
Since you did tell us that you had the Express connected with an Ethernet cable, I assumed that was how you wanted to configure the Express.
But I want to extend a wireless network (not using ethernet)
Because Airport Express and Time Capsule cannot be connect via ethernet cable.
Follow the same setup as above....and do not connect an Ethernet cable.
Keep the Express near the Time Capsule for the setup. Once you have a green light, move the Express to a point that is about half way between the Time Capsule and area that needs more wireless coverage.
If you reset the Express several times and try the setup several times without success, I think you have to suspect a defective Express.

How many airport express can i install in my home to stream music?

I plan to buy many airport express in my new Home!
how many airport express can i install in my home to stream music?
Jimmy

jimmyflo wrote:
I plan to buy many airport express in my new Home!
how many airport express can i install in my home to stream music?
Theoretically as much as you want but there are technical limitations about the usable bandwidth in the wireless or by the used access point.
All participants (stations) in a wireless network share the available bandwhith equally and therefore a point will get reached where the throughput in the network became insufficient to stream music.
Also some routers limit the number of stations could get connected. For instance Apples Airport Extreme have a limit of 50 connected clients and the AP-Express (if used as access point) a limit of 10 simultaneous connections.
Lupunus

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

How many airport express can be supported by software remote at one time.

how many airport express can be supported by software remote at one time?
I mean remote software can control at one time

Well Apple makes an iOS application called 'Remote' it's used to control iTunes on a Mac, Or to control an Apple TV Multimedia features.
Apple also makes "AirPort Utility" for iOS. Airport Utility can be used to configure Aiport Extrem, Airport Express And Time Capsul using an iPad, iPhone or iPod Touch. You can use it to connect to one device at a time. While connected to the device you can configure it to work as part of a larger Airport network. If you want to configure muliple device, you would connect to one device, configure it, And then connect to the next device, and configure it, and so on and so fourth.
I haven't found a limit.
How big of a network are you trying to make?

Airport Express can find my printer (Lexmark z55) but cant print ?

Hi
At home i use Airport express with lexmark z52 and all work fine ...
At my parants house they got a Airport express with a lexmark z55 and the Airport express can see the printer but when i try to print it says "Problem communicating with the printer" ive tryed to disable firewall but that didnt help.
Ive tryed with a HP deskjet 450 and it works with that one ...i think its the Lexmark driver (i tryed these ones http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:339:0:0&searchLa ng=en&os_group=WinXP&target= )
but no luck ...im running WinXP
So if you got any idea please lemme know
Best Regards
Michael Fog
Ps : I have also tryed the Bonjour program no luck

Ive tryed with a HP deskjet 450 and it works with
that one ...i think its the Lexmark driver
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html

While using the airport express can I listen to music streaming from the Internet?

While using the airport express can I listen to music streaming from the Internet?

The music must be in your iTunes library.
Or, you can try to add a special application like Airfoil that may allow you to stream any audio signal on your computer to the AirPort Express. It might work.
http://www.rogueamoeba.com/airfoil/

Airport Express can't see Linksys router

Hi, I'm getting nowhere trying to get my Airport Express to find my Linksys E2000 router and I hope someone here can help.
The E2000 is connected to the internet and both laptops in the house, an iphone and an Android phone can all use it successfully. I have a 1 month old Airport Express which I'd like to use to stream music. Until today I've been using the Express as the wireless router without problems so I know it can be used in that capacity. In the Airport Utility, the Express is found but after setting the Wireless Mode to 'Join a wireless network', the droplist of visible networks does not include the E2000's secured network. Curiously, the unsecured guest network created by the E2000 can be seen. The network which can't be seen is secured with WPA2-PSK. I've tried disabling the firewall on the E2000 but this had no effect.
Has anyone else come across anything similar with the Linksys routers or similar? Any help will be greatly appreciated.

It won't come up up in Airport Admin Utility. To configure the router launch a browser. Typically Linksys routers use 192.168.1.1 as the admin address for their routers. Once there, use admin as the password to gain access. If it won't let you in you will need to reset the router to factory default settings. Check the Linksys web site for the router manual.

Airport Express - Can this be used to connect my wired Xbox360?

Hi
I currently have a Timecapsule set up as my main internet and network hub. I wanted to connect my Xbox360 and Mac Mini to the internet and network but they are in a different room and I wanted to use ethernet cables (the Xbox doesn't have wifi).
Could I use an Express for this - i.e. connect the express near the xbox and within the signal from the Timecapsule and then run an ethernet cable from the express to the xbox - would this work? Would I get close to 802n speeds this way. My Mac Mini only has 802g so if I connected this way would I get closer to 802n speeds when transferring data across the network etc.
Let me know - my other option is to just an ethernet cable from the Timecapsule to the Mac Mini and Xbox - flat ethernet cable - but this would need to be run under the carpets.
I'd like to know which option would give me good speeds etc.

With regards to plugging your XBox into the Airport Express, then yes, it appears this is possible - http://support.apple.com/kb/HT1515 (Although I don't have an xbox or an Airport Express so I can't guarantee this).
In theory you should get 802.11n speed between the wireless points although your speed via the ethernet cable is slower (in theory) than n-mode. In practice, the n-mode won;t connect at full speed all the time and you're likely to get a better speed from a cable running from the mac-mini to the TC.
I use my Macbook over the air to my TC in n-mode and while the speed isn't lightning fast, it gets the job done.

Linksys & AirPort Express; Can i do this?

Similar Messages

Maybe you are looking for