Linksys/cisco EA3500 / N750 - configuration VPI/VCI

I need help for configuration of the router ea3500/n750. In the configuration dont show the option PPPoE LLC for set the option Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). Without it I can not connect to my provider.

I suspected that. I read one time that It's possible change the settings of the router with the tampermonkey(one add of google chrome). I will seek of that. Anyway thanks very much.

Similar Messages

SR520 vpi/vci prob

Hello,
We've recently ordered a bunch of sr520's and started configuring them, but the problem we faced is that the ADSL service provider has the VPI/VCI configured on 100/100, and i've realized that the max VPI value available in the sr520 is 31 as a 5bit Number instead of the normal 255 as an 8bit number, which makes it impossible to connect to the internet.
Is there anyway to increase the VPI value to meet the 100 value?? or should we just through out all the sr520's and the next orders that includes them?
Especially since we're moving towards a heavy SMB (Cisco's Express) marketing campaign, and this campaign involves demonstrating live.
Please Help.
Amin

MAD_ZOIDBERG wrote:
Thanks Dean
Not sure if a mod would answer this question as of course this is all done for us with our O/R modems and HH's.
It's a Fritzbox setting. Strangely it asks for a setting and will only connect with a value of 1/32 which is odd?
Of course
If anyone can 100% confirm the correct settings (or if 1/32 is just a default mask for the Fritzbox) then feel free to post. I've never used a Fritzbox (nor am I likely to with the cost of the things - I'm happy enough with my botch-job of a network ) so I can't really comment!
Dean
BTCare Community Mod
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

How do I make airport time capsule work with Linksys cisco router?

Hi all.
I bought an airport time capsule 3T and want to connect it to the internet, using a macbook with OS X 10.9.2. Currently I am using a Linksys Cisco router model WAG54G2.
I followed the steps of the setup airport guide: Connected the WAN port of the airport with an ethernet port on the router, plugged in the power cable, filled in the internet username and password. In Airport Utility I can see the airport and the internet icon, both with green dots most of the time. But it seems to disconnect every minute or so, green dots turning orange and the status light on the airport flashing orange. The internet light on the linksys also goes on and off. When the internet is on, it is quite slow.
Advice is welcome!
Kees

No guarantees here. AirPort Utility 6.3.1 is a big drop down from the 5.x versions in Leopard and Snow Leopard.
Hold in the reset button on the back of the Time Capsule for 9-10 seconds and release
Allow a full minute for the TC to restart to a slow, blinking amber light
Click the AirPort icon at the top of the screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on Time Capsule.
The example below shows an AirPort Express. You will see Time Capsule.
As soon as you click on the Time Capsule, AirPort Setup will open up automatically and take a minute to analyze the network....and probably suggest that the Time Capule will be configured to "extend"....which is wrong.
Click the Other Options button at the lower left
Click Add to an existing network
Next to Connect To.....select the wireless network name from the drop down list....if it appears. Otherwise type in the exact name of the wireless network.
Click Next
Confirm any settings again and wait to see if AirPort Utility 6.3.1 will allow the Time Capsule to join the wireless network.
You have about a 1 in 5 chance that this will occur.
Post back on your results.

Linksys Cisco SRW248G4P 48-port 10/100 + 4-port Gigabit Switch Help

The switch which is a Linksys Cisco SRW248G4P 48-port 10/100 + 4-port Gigabit Switch, was configured by a contractor which was long ago run off, and the documentation left behind to log into the switch is incorrect. How can we reset this switch so we can configure to the new required settings?
I have attempted to go in through the web browser gui, and no luck logging in via factory default creditials, cannot log in using any of the common admin creditials, nor can we get in via the documented admin name and pw the contractor left.
Attempted ot go in through the console, that doesn't work right at all. Takes 15-20 min before I start even seeing user name or password boxes. Cannot type a single thing into those boxes. I have set the hyperterminal to com1, 38400, 8, none, 1, hardware. It kinda lets me see some of the log in screen, but will not let me type into the username whatsoever.
Logging via web browser I see all the login option but not a single username or pw works. Please if anyone can help, this has been an issue which is now critical.

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center.
The settings for connection using Hyperterminal through the Console port should be:
Bits per second: 38400
Databits: 8
Pairity: None
Stop bits: 1
Flow Control: None
When you finish configuring the HyperTerminal, the Login screen appears. The first time you open the Console Interface, use the default username admin and leave the password blank and press the Enter key. You can set a password later from the User and Password Settings screen.The Main Menu screen displays six menu choices: System Configuration Menu, Port Status, Port Configuration, PoE Configuration, Help, and Log Out.
User and Password Settings, IP Configuration, File Management, Restore System Default Settings, Reboot System and Back to Main Menu.
To restore the Switch back to the factory default settings, select Restore System Default Setting and press Enter. A confirmation message appears asking Are you sure? [Y/N]. Press the Y key to continue or the N key to cancel the action.
System Configuration Menu options: (Which is where you will need to go) consist of: System Configuration, Management Settings
After pressing Y, at this point reboot your system and it will be back to Factory Fresh.
If you have any questions or this doesn't work, please let me know. I am attachng the Admin Guide for you as well.
Eric Moyers
Cisco Support Network Engineer
1-866-606-1866

How to bridge a linksys cisco E1200 series router?

I have recently purchased a linksys cisco E1200 series router and would like to know how to bridge the connection to my xbox

purchase 881w, get rid of linksys. That should do it.
Sent from Cisco Technical Support iPad App

When is Linksys/Cisco going to fix E4200 problems??

All the problems started when I upgraded from a WRT54G (never had a problem with this router over several years) to the E4200 (v1.1.02) a couple of months ago. No problems with any of the wired connections of course, but all my wireless 2.4 GHz connections had problems immediately -- decreasing signal strengths (no matter how close to the router) and eventual loss of connectivity. I tried all the conventional solutions like switching channels, checking for interference, moving the router to "higher ground" where it could vent heat better (this baby really runs hot) and be unobstructed, etc., but the only thing that would cure the problem was to reboot the router, usually once or twice a day. I checked the forums and found that lots and lots of folks were experiencing this behavior. I finally discovered that if I disabled the 5gz band the 2.4 GHz connections would no longer be dropped (by the way, once they're dropped, the only way to get back is to reboot the router; eventually the router state is such that nothing can connect to it). Still tends to have signal strength loss over time but at least we're running consistently. The other problem I'm experiencing is that if I get more than about 30 - 35 feet away, there is a significant decrease in signal strength.
I bought this router for (1) the gigabyte ports for my wired machines; (2) increased signal strength for my wireless devices at greater distances; and (3) the dual band capability to handle the 5 GHz spectrum as those devices become more prevalent. Well, 1 out of 3 is pretty pathetic performance for what is a relatively expensive high end router from a company that until now I had a confidence in their ability to produce technically sound hardware.
I may be way off base here, but based on over 40 years experience in IT, this appears to be part of a larger trend where the bottom line seems to be dicating the rush to market of inadequately tested hardware and software.
Linksys/Cisco -- can you please acknowlege these problems and what the current plan and timetable is to fix. The E4200 has been in the market place for a while now and I still don't see a firmware upgrade.
David (Extremely disappointed with Linksys/Cisco and the E4200)

farookahmed wrote:
I got my linksys e4200 a few months back along with x3000 ( upgraded my home wireless network ). While the x3000 is great the e4200 stil does not work with mac. It just can take the ip adress once i power off the mac and on it. Called linksy support they gave me a rma ( return merchandise authorisation ). The issue is still there even with the new one. Cant be fixed even with 1.0.4. Bad product dont buy it.
Spoiler (Highlight to read)
What have you done so far with the replacement device?

Linksys Cisco WVC210 Network Camera - Problem

Hello Cisco Members,
I have problem with one Linksys Cisco WVC210 Network Camera.
When I Power ON, the PowerLED blinking, other 3 GreenLED light and on LCD Display have nothing.
I make 30 seconds push resset button, 30 seconds power OFF and havent result. When I connect it to
Router with DHCP, this camera can not take IP Address... I do not understand where is a problem with
this camera.
I write here to get a fix of this problem.
Regards,
Vivendi

Try power on and after 90 seconds go to the Browser and type in 192.168.1.99 (assuming you are on the 192.168.1.xx LAN network) and see if you are able to get to the firmware page, if yes try reload the firmware, if you are not then I would recommend returning the product by getting in touch with Cisco's Tech Support and get an RMA number and instructions on returning the product and get a replacement.
Alan.

Linksys / Cisco website continuously broken?

Is the best we can ever expect from Cisco / Linksys is a set of poor web pages which are unintuitively linked to one another, which have broken download for years at a time, and with web services which are down without explanation? Does Linksys / Cisco REALLY want us to think that we don't deserve better? Never mind the horrible security of these devices. Never mind that Cisco / Linksys would rather we throw our older devices in to landfills every time a backdoor is discovered in our devices. Can't you people at LEAST fix your damned web pages and KEEP YOUR WEB SERVER UP so we can at minimum get to the last supported version of the firmware you offer? Look at this problem:https://community.linksys.com/t5/Wireless-Routers/WRT54G2-V1-Firmware-Upgrade-Issue/m-p/606136 That was from January, 2013. Guess what? Going to the same web page for the WRT54G2 to try to download firmware STILL takes one to the download page for the WRT54G, NOT the G2. Where's the page for the G2? It's been a year and a half! Not only that, but homesupport.cisco.com / www.linksysbycisco.com / start.linksys.com are down. What year is it? It's 2015, and Cisco / Linksys can't keep a web server up? I'm sorry that some of the people I support were naive and bought Cisco / Linksys products. It won't happen again.

Thank you. If Cisco has completely finished screwing Linksys, then those links should be removed from the site. Also, there's no reason that start.linksys.com shouldn't work. FYI, http://www.linksys.com/us/ leads here: http://www.linksys.com/us/support-product?pid=01t80000003K7XLAA0 The "Latest Updates" link at the bottom, under "DOWNLOADS", takes people here: http://www.linksys.com/us/support-article?articleNum=148648 That's the page for WRT54G downloads, NOT for WRT54GV2 downloads. Linksys? This problem was reported in 2013.

Linksys Cisco switch 24 ports

Dear All,
Just a question, I have doubt whether Linksys Cisco switch 24 ports SLM2024 and Cisco SLM2024 both are same. Both are look wise and colors are different??
If both are same , are they supports for VLAN?? Can use them in a VLAN environment?? Can anyone tell me the SFP for multimode and single mode which will work with SLM2024, and SLM2048 switches??

Just a question, I have doubt whether Linksys Cisco switch 24 ports SLM2024 and Cisco SLM2024 both are same. Both are look wise and colors are different??
Answer; Both are same:
I would like to inform you that Cisco SLM2024 24-port Gigabit Smart Switch - SFPs .. is EOS.
(http://www.cisco.com/c/en/us/products/switches/slm2024-24-port-gigabit-smart-switch-sfps/index.html)
2-2248 is also EOL/EOS:
http://www.cisco.com/c/en/us/products/switches/slm2048-48-port-gigabit-smart-switch-sfps/index.html
B)
If both are same , are they supports for VLAN?? Can use them in a VLAN environment?? Can anyone tell me the SFP for multimode and single mode which will work with SLM2024, and SLM2048 switches??
Answer:
Yes they support VLAN, You can refer the below link for connfiguring the same:
https://supportforums.cisco.com/discussion/11579161/slm-2024-vlan-config-help
Can anyone tell me the SFP for multimode and single mode which will work with SLM2024, and SLM2048 switches??
http://www.cisco.com/c/en/us/products/switches/slm2048-48-port-gigabit-smart-switch-sfps/index.html
HTH
Inayath
*Plz dont forget to rate the usefull posts.

Cisco WAP4410N - not configurable as Wireless Client with WRT610N?

Hi!
On several workstations I use multiple network to
1 - access Internet and share Printers
2 - communicate within the local area
The second WLAN I need for several NDAS devices.
Due to their own LPX-Protocol these NDAS devices don't work properly with MAC address cloning. In combination with several access points or clients from other manufacturers Wireless N transmission does not work.
So in WLAN 2 I use the Cisco Linksys WRT 610N Router with 2.4 Ghz WLAN.
I intended to use the Cisco WAP4410N in Client Mode to connect a workstation with this router and set up NDAS connection.
Other workstations will directly connect to the router via Cisco Linksys WUSB-600N.
The connection from WUSB-600N to WRT610N works perfectly.
My problem is:
The WAP4410N does not connect to a wireless Network in Client Mode.
(It is not a problem of Channel configuration, Security or Signal strength - because if I connect my workstation via WUSB-600 this works instantly.)
If setup as an access Point it will start up sending competing to my router.
In Network Status it shows no received packages.
In Wireless Client/Repeater Mode there is no connection either.
My question is:
Is the WAP4410N not designed to be used as a Wireless Client?
An if it was - how is it to be set up as one?
Thanks
ando_user

Hi!
On several workstations I use multiple network to
1 - access Internet and share Printers
2 - communicate within the local area
The second WLAN I need for several NDAS devices.
Due to their own LPX-Protocol these NDAS devices don't work properly with MAC address cloning. In combination with several access points or clients from other manufacturers Wireless N transmission does not work.
So in WLAN 2 I use the Cisco Linksys WRT 610N Router with 2.4 Ghz WLAN.
I intended to use the Cisco WAP4410N in Client Mode to connect a workstation with this router and set up NDAS connection.
Other workstations will directly connect to the router via Cisco Linksys WUSB-600N.
The connection from WUSB-600N to WRT610N works perfectly.
My problem is:
The WAP4410N does not connect to a wireless Network in Client Mode.
(It is not a problem of Channel configuration, Security or Signal strength - because if I connect my workstation via WUSB-600 this works instantly.)
If setup as an access Point it will start up sending competing to my router.
In Network Status it shows no received packages.
In Wireless Client/Repeater Mode there is no connection either.
My question is:
Is the WAP4410N not designed to be used as a Wireless Client?
An if it was - how is it to be set up as one?
Thanks
ando_user

Cisco ASA 5505 configuration

Hi,
I have configured cisco ASA 5505 but I can't get access to internet using my laptop connected to the ASA. I did not use the console but the graphical interface for the configuration. I changed the inside adress of the ASA and it is 192.168.2.1. From the inside I can't ping the material in outside and from outside I can't ping the laptop connected to the ASA.
Here is my configuration:
Result of the command: "show running-config"
: Saved
ASA Version 8.2(5)
hostname xxxxxxxxxxxxxxxxx
domain-name xxxxxxxxxxxxxxxxxxx
enable password xxxxxxxxxxxxxx encrypted
passwd xxxxxxxxxxxxxxxxxxxx encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.2.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 192.168.1.48 255.255.255.0
ftp mode passive
dns server-group DefaultDNS
domain-name processia.com
access-list outside_access_in extended permit ip any any
access-list icmp_out_in extended permit icmp any any
access-list inside_access_in extended permit ip any any
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ipv6 access-list outside_access_ipv6_in permit ip any any
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
access-group inside_access_in in interface inside
access-group icmp_out_in in interface outside
access-group outside_access_ipv6_in in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.1.48 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.2.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.2.2-192.168.2.129 inside
dhcpd dns 80.10.246.2 80.10.246.129 interface inside
dhcpd ping_timeout 5000 interface inside
dhcpd domain xxxxxxxxxxxxxxxxx interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
policy-map global_policy
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:7e6f35db321b722ca60009b0c0dc706e
: end
Thank you for your help

Hi Sylla,
The static route you have configured for Internet access needs to be corrected:
route outside 0.0.0.0 0.0.0.0 192.168.1.48 1
The next hop address should be your ISP's gateway IP address and not the ASA's outside interface IP. Currently, both are configured for 192.168.1.48.
-Mike

Cisco ASA 5505 Configurations. Help... Beyond Frustrated

Hello All,
I'm fairly new to Cisco products and Network management in general. At my place of employment, I was hired as an IT Tech- Repair and Building computers, most aspects of Physical networking, and software refresh/upgrades as well as solving compatibility issues among a plethora of other things. I've configured APs, a couple Catalyst switches, a router or two, and that is about the breadth of my Cisco knowledge. I was kind of thrown into a project which is to update the current inventory of computers which all run Windows XP Professional. We are making a capital purchase of 20 Laptops and 40 Desktops all of which will run Windows 7. This means the outdated PIX they were using is now useless. I purchased a Cisco ASA 5505 (Version 8.2(1)) because it is compatible with Windows XP and Windows 7. I have spent several days and sleepless nights trying to figure out how to configure this thing. I was hoping to use SSL for the VPN. I did some basic configurations just to get started but like I said, I have no real experience with Adaptive Security Appliances and I am so frustrated right now. I tried using the Wizard to no avail. I did a write erase using CLI and tried to configure that way but I'm doing something wrong as far as I can tell. The configurations were mostly pulled from here, the Cisco Community, and a couple other web sites.
I’m connecting the ASA 5505 to a cable modem (gateway 24.39.245.33) and to our Netvanta for VPN purposes. Here are the commands/what I have configured so far:
hostname AMDASA
domain-name asa.(mydomain).com
enable password (encrypted)
passwd (encrypted)
interface Ethernet0/0
description TWCoutside
switchport access vlan 2
no shutdown
write mem
exit
interface Ethernet0/1
description Port1inside
switchport access vlan 1
no shutdown
write mem
exit
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.250 255.255.255.0
write mem
exit
interface Vlan2
nameif outside
security-level 0
ip address 24.39.245.36 255.255.255.240
write mem
exit
object-group icmp-type DefaultICMP
description Default ICMP Types permitted
icmp-object echo-reply
icmp-object unreachable
icmp-object time-exceeded
write mem
exit
ftp mode passive
write mem
clock timezone EST -5
clock summer-time EDT recurring
write mem
exit
dns server-group DefaultDNS
domain-name asa.adcmotors.com
write mem
exit
access-list acl_outside extended permit icmp any any object-group DefaultICMP
access-group acl_outside in interface outside
access-list acl_inside extended permit icmp any any object-group DefaultICMP
access-group acl_inside in interface inside
write mem
exit
write mem
That is the extent of the configurations I made via CLI. I don't know how to set the DNS lookup from a static port and I have no idea what else I'm supposed to do after the above configurations I have done. Is there a place to actually obtain ALL of the configurations needed to VPN in? Is there an easier way to make this thing work? I've seriously grown a patch of gray hair because of this device. Please help me if you can!!!!!!

Hi our desperate friend .
First I would suggest to use the Cisco VPN client instead of SSL VPN (AnyConnect). The configuration is a bit simpler and for the SSL VPN you would need to install the client on the ASA and purchase additional license if you plan to have more than 2 clients. The VPN Client usually comes with the ASA. If you dont have it or dont have access to download it from cisco.com go to the person from which you purchased your ASA and ask him how to get it.
That said, I also think that your ASA lacks of some basic configuration as of now. If you are planning to use this in replacement for your current PIX. You would need to configure a default route and some basic NAT:
route outside 0.0.0.0 0.0.0.0 24.39.245.33
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.255.0
Now regarding the VPN Client configuration you would need to something like this:
Create an isakmp policy:
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
Create a couple of ACLs that we will use later:
access-list nonat permit ip 192.168.0.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list split_tun standard permit 192.168.0.0 255.255.255.0
Create a Pool for the VPN Clients to use:
ip local pool TestPool 192.168.100.1-192.168.100.20 mask 255.255.255.0
Create a Group Policy:
group-policy TEST internal
group-policy TEST attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split_tun
Create a group:
tunnel-group TEST type ipsec-ra
tunnel-group TEST general-attributes
address-pool TestPool
authentication-server-group ABTVPN
default-group-policy TEST
tunnel-group TEST ipsec-attributes
pre-shared-key cisco123
Create crypto map and do a NAT 0:
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map Outside_dyn_map 10 set transform-set ESP-3DES-SHA
crypto map Outside_map 10 ipsec-isakmp dynamic Outside_dyn_map
crypto map Outside_map interface outside
nat (inside) 0 access-l nonat
Finally create a user that you will use to connect:
username test password test123
Then you would need to configure your VPN Client to connect with the ASA.
Here is a config Example of VPN clients to the ASA. It uses an external server for the authentication but just skip those parts. For the initial config you might want to keep the authentication local.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806de37e.shtml
I hope this helps. Feel free to ask if you have any questions. Also it would very usefull if you could upload the current config (show run) of the ASA in case you need to ask something else.
Have fun.
Raga

Cisco Wireless AP configuration as DHCP

I have 10 Cisco 1242 wireless Ap in my Office. 04 of them will be relocated in a different place where we dont have any DHCP server. I would like to configure those AP's as DHCP provider for their associated clients.
Is it possible I know but I dont know how to accomplish that.
Is there anyone who can answer this? If yes please let me know this from which option CLI or Web view I can configure those AP's?
Regards,
Sayeed.

Hi,
Here is the link which tells us how to accomplish the task.. But make sure.. the IP addresses will be leased by the AP in the management ip subnet only.. please check the below doc before implementing..
http://www.cisco.com/en/US/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1-chap5-admin.html#wp1090319
Lemme know if this answered your question!!
Regards
Surendra

Cisco sns-3415 configuration

Hi Team
we brought new Cisco sns-3415 ACS configuration somebody please help to configure this on first time. I am simply first time on this device so I look forward first level configuration guide. find below the configuration details.
SNS-3415-K9
Small Secure Network Server for ISE NAC & ACS Applications
CON-SNT-SNS3415
SMARTNET 8X5XNBD Small Secure Network
CSACS-3415-K9
ACS application & BASE license for SNS-3415-K9 appliance
CSACS-5-BASE-LIC
Cisco Secure ACS 5 Base License
CSACS-ACCYKIT
Accessory Kit for Access Control System SW on 3415-appliance
SFS-250V-10A-ID
SFS Power Cord - 250V 10A India
SNS-4GBSR-1X041RY
4GB 1600 Mhz Memory Module
SNS-600GB-HDD
600 GB Hard Disk Drive
SNS-650W-PSU
650W power supply for C-series rack servers + cord (configur
SNS-CPU-2609-E5
2.4 GHz E5-2609/80W 4C/10MB Cache/DDR3 1600MHz
SNS-N2XX-ABPCI01
Broadcom 5709 Dual Port 10/100/1Gb NIC w/TOE iSCSI
SNS-RAID-ROM5
Embedded SW RAID 0/1/10 8 ports SAS/SATA
SNS-UCS-TPM
Trusted Platform Module for UCS servers
Thanks
Sreejesh S

check Cisco how to guides for step by step configuration just follow the instruction and you can easily configure the setup also when you first open the ISE there is an option for express setup (Auto config) but i would suggest for the guide (link given below)
https://www.cisco.com/en/go/trustsec.
**********Do rate Helpful posts************************

Cisco ISE managing configuration

Is there a built-in mechansim for revision control in Cisco ISE? If not built-in, then what is the other way? I have been trying to look for documentation online but didn't find any.
Just to explain what I am looking for:
A way to properly manage all the configuration changes to ISE node. Changes are usually identified by a number or letter code, termed the "revision number". For example, an initial set of files is "revision 1". When the first change is made, the resulting set is "revision 2", and so on. Each revision is associated with a timestamp and the person making the change. Revisions can be compared, restored, and with some types of files, merged.
I ask this because "show run" output in ISE CLI does not give all the configuration details. How can we maintain the history of configurations?
PS: I rate useful posts
Thanks,
Kashish

There is not a way to track which version a specific ISE configuration is on. The ADE-OS configuration, or cli configuration typically is static once the repositories, dns info...etc is all set and done. For the application database you can setup a timer where an automatic backup is generated, from there you can manage what dates a backup is good for.
Thanks,
Tarik Admani
*Please rate helpful posts*

Linksys/cisco EA3500 / N750 - configuration VPI/VCI

Similar Messages

Maybe you are looking for