Linksys Connect CD/Downloadable Software compatibility problem with Mac OSX 10.4.11

I purchased a Linksys E1200 and I am running Mac OSX 10.4.11. As I have a G4 eMac, I cannot run a higher operating software. The CD that came with the E1200 will not launch the Linksys Connect software, as it is not compatible with Mac OSX 10.4.11. When I download Linksys Connect software from the support section of the Linksys site (version 1 or 2), same problem. I have read that I can use the E1200 with Mac OSX 10.4.11, but how? Getting very frustrated and would appreciate any practical advice/help. Thanks!
Solved!
Go to Solution.

Hi bassist71,
You may actually do the setup manually. It's done by accessing the setup page of the route through 192.168.1.1 and configuring the settings according to your Internet connection type. If you have a Cable connection, you may check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r... If you have a DSL connection, check this out,  http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=9017a6f6bece444dbb4a0746eb87682a_2210.xml&pid=80&r...

Similar Messages

  • Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

    Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
    My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
    Please help!!!
    Thanks,
    Paolo

    Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
    Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
    Personally I think of all the issues possible its DVDSP vs QT.
    Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

  • Compatibility issues with Mac OSX Leopard 10.5 and Word 2004 11.6.3 on G5 PowerMac?

    Are there compatibility issues with Mac OSX Leopard V. 10.5 and Word 2004 11.6.3 when installed on a PowerMac G5? I understand the Leopard upgrade is okay on the later Intel Mac, but what about my G5 PowerPC Mac?

    I do not use Microsoft Excel much but when i do use it it works fine on my G5. my powerbook has excel to but sometimes freezes on the powerbook. but not the G5 so give it a try you can always uninstall it if it does not work good
    anitabean wrote:
    Thanks so much for your positive reply! Are you a big user of Excel? That's where I've heard people have had trouble, with cells locking up and so on.
    Crossing my fingers and loading Leopard....
    Cheers.

  • E2100L Cisco Connect and Network Magic compatibility issues with Mac OS X 10.7 Lion

     When you will release the latest version for Wireless router Linksys E2100L?, because I bought a MAC with Lion and I can´t use my Router.
    Regards,
    Daniel

    Older versions of Cisco Connect for Mac computers have compatibility issues with the latest release of Mac OS X (10.7 “Lion”). Only Cisco Connect versions 1.4.11222 and newer are compatible with the Lion operating system.
    Here is the link to ensure that Cisco Connect can be installed on your Mac: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=a4e763be954243cfa0ab960c0fac7105_KB_23xxx_EN_v1.xm...
    There is no such information about the release of Cisco Connect for E2100L for the Mac OS X (10.7 “Lion”) compatibility, so you need to wait for further release of the firmrware for E2100L. 

  • Problem with Mac OSX version of Microsoft RDP Client 8.0.10 (Build 25189) connecting to Linux host running XRDP

    Hi,
    I have an issue when using the Microsoft RDP client on Mac OSX 10.X when connecting to a Linux host running the XRDP service(XRDP host is authenticating to an AD DC).
    Exactly the same connection parameters work when connecting to the XRDP host from a Windows server using the local Microsoft RDP Client and the same authentication credentials, so I am confused as to what might be creating the issue.
    I have also checked that I am able to connect from my Mac to the remote linux box that is running the XRDP service, by using another App on OSX called CoRD. This also connects without issue. 
    Are there any differences in the way the Mac version of Microsoft RDP authenticates compared to its Windows counterpart?
    Any advise appreciated. Happy to provide any logs.

    Hi,
    As this case has been quiet for a while.I need to close the case and will mark it as Answer. If you still have any issue,I suggest you ask in a new thread. 
    Thanks for your Support & understanding!
    Regards.
    Dharmesh Solanki
    TechNet Community Support

  • HP1536dnf Scan problem with Mac OSX 10.7.5

    I have just installed the HP online download driver for my Mac computer (running Mac OSX 10.7) and the subject HP 1536dnf MFP; when attempting to operate the HP1536dnf Scan function from my MacBookPro; I get the following message:
    192.168.0.6 is currently unavailable. Ensure your device is powered on, check the connection, and ensure your network is   functioning properly. If these conditions are correct, restart the device and try scanning again. I have check the router and Mac configurations without resolving the problem.
    My MacBook Pro is connected to a Motorola Wireless Cable Modem & Gigabit Router (model SGB6680) via wireless link and the HP1536dnf is connect via the Motorola Router Lan connection (192.168.0.6) .
    NOTE: I am able to print to the HP1536dnf from the Mac, however I am not able to operate the Scan function wirhout getting the above stated message.  This leads me to understand the Mac link to the router and the Lan to the HP1536dnf is  operating correctly. 
    Please suggest items to check or a Fix for my problem.  Thanks!
    This question was solved.
    View Solution.

    Hello Ray1536dnf,
    Thanks for the post.  WIth this one, scanning being a more complex process than printing we may have some other issue here.  I might suggest taking a look at the below document specifically solution three, assigning a static IP.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02790693&lc=en&product=3974279&tmp...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • Asha 501 and USB problems with MAC OSX 10.9

    I checked everywhere and I could not find any threads about this problem, so I'm asking here, in the official support forum.
    The problem is:
    Connecting the Nokia Asha 501 to the mac (via USB cable), and selecting "external memory", the memory card is mounted and I can browse the contents, BUT the photos show corrupted. I even lost some, because I tried to open them in the Preview app on the mac. (take a look at the attached photo of this post, a screenshot clearly showing corruption)
    Importing the photos via Bluethoot works, and the photo on the phone are showing fine. The memory card is okay, I checked with an external card reader.
    Also:
    - This problem does not show with Windows 7/8
    - This problem does show with other Mac OS X
    The phone is updated, I flashed it with the Nokia Software Updater and I formatted the memory card.
    Any help?
    Attachments:
    Schermata 2013-11-11 alle 17.13.07.png ‏285 KB

    I have the same problem. Would be great to have a solution. I have some photos on the phone I'd like to use and keep, but at the moment they are stuck on the phone.
    John

  • HP Officejet Pro 8620 - set up problem with MAC OSX version 10.7.5

    I have just bought a new Officejet Pro 8620 and all set up fine to a point. Problem is that when I try the HP Utility set-up and click on "Add Printer" and identify it as "Bonjour Malfunction" and select the printer from the pull down menu list, I receive the message:
    "The software for this printer is currently unavailable, please contact the printer's manufacturer for the latest software". 
    I have already downloaded the latest software from theHP website - but stil no resolution. 
    Any help please would be gratefully received.

    Hello @Kennynic!
    Thank you for posting on the HP Forums!
    I would be happy to provide some help regarding your Officejet 8620 and installing the software on the Mac.  The first thing I suggest is to ensure all the HP Software is removed from the Mac. I suggest uninstalling the HP Software.  After the software is uninstalled I recommend performing a "repair disk permissions" on your Mac. A repair disk permissions is a utility built in the Mac operating system designed to locate and resolve issues or errors that may cause complications when re-installing. After the repair disk permission is complete restart your Mac and try adding the printer again.
    To uninstall the HP Software click here: Uninstalling HP Software
    To perform a repair disk permission click here: Performing a Repair Disk Permission
    There is only software available for Mac 10.10.  Unfortunately there is no full feature software and driver available for Mac 10.7.  You should still be able to add the printer using the AirPrint drivers.  Go into System Preferences from the Apple icon and click on printer and scanner.  In the printer and scanner window click the add printer icon and you should be able to add the 8600 printer via Wi-Fi and AirPrint.
    I recommend checking for software updates on the Mac. To check for software updates click the "apple" icon at the to left and click on "software update".  Install any HP or printer updates. After any updates you should restart the computer. and try printing.
    Please post back and let me know how everything goes!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • Problem with Mac OSX Magic Mouse in Library

    Dear Freinds,
    me and some colleques, we got a problem with Apples Magic Mouse and Lightrooms Library: If the mouse is on the big picture of LRs Library, and you are swiping or wiping on the mouse only a very little, a lot of pictures are scrolling very fast, much to fast to handle.
    This happens often without any purpose and that´s very annoying, because you have to search the picture again, that you worked with.
    I think this is a bug of Lightroom, but I didn´t found a solution anywere.
    Is there any?
    Thanks
    Marco

    This behavior was also in Lr4 and maybe Lr3.  The swiping with the magic mouse is oversensitive in a few other programs also.   It is pretty annoying but I have finally got used to being careful with the swipe in Library on the big photo.  I would think Adobe could adjust the speed for this but Apple should allow the user more options in the mouse settings panel.  Apple seems to be going in the negative direction of letting the user customize the interface as they keep taking more setting features out.  In their typical arrogance, it seems that they think Apple knows best and the users can just deal with it.

  • Pixma MX430 Wireless Connectivity Problems with Mac OSX 10.9.4

    My Pixma MX430 suddenly refuses to connect wirelessly to my Mac running OSX v 10.9.4. I was able to fiddle with settings and nudge it to work but it now steadfastly refuses to play ball. I have no CD drive incidentally. I would be grateful for any suggestions as I need to print and scan documents urgently.
    Many thanks for your help. 
    Jenny

    USB 3.0 is an international standard. Yes, it's compatible with OS X 10.9.x
    Reviews on Amazon from other iMac users have been positive.
    Just like with USB 2 hubs, some devices aren't happy sharing.
    I can't tell for sure it's the hub's fault. You need to try other combinations of connection.

  • Problem with mac osx 10.6.4 and audio firewire device

    ok i use an edirol fa-66 , the problem is a random one , sometimes when i play music with itunes , logic or even the preview mp3 feature , the sound go downsampled and then stops, the only way to return is turn off and turn on the audio interface. I had this problem time ago only with logic 9.0.2 but with the version 9.1.1 everithing got right. Now with osx 10.6.4 the problem come back on all the audio programs (not only logic),so i have returned to 10.6.3, everithing works fine.
    conclusion
    in 10.6.4 there is something wrong with the core audio that is incompatible with edirol fa device.
    maybe with osx 10.6.5 apple can resolve this?
    i'm thinking to buy a motu device (they have their driver and don't use core audio)

    up

  • VirtualBox compatibility issues with MAC OSX Mavericks

    Hi All,
    I am just feeling I should have stuck to 10.8. I upgraded to 10.9 (Mavericks) and am no longer able to use the host adapter settings on VM. Upon further looking around, it was suggested to upgrade to Virtual box version 4.3 and I did that. So far so good. Now, unlike in the past, when i tend to shut my machine - the display lingers around and when I tend to open any apps (like safari) a pop up message - your machine is already shutdown is displayed!! . I had to physically forcelly push th power button.
    Later when I log in back, the Virtual Box had to be reinstalled, as I found the same issue with Host Adapter settings.
    Is anyone else facing this issue?
    ALso, is there any way I can get my mac book rolled back to 10.8?? I am still in warranty if that helps.

    FYI, some bugs were fixed in 4.3.1 but there's still a blocker that VirtualBox prevents the Mac from shutting down.
    The bug ticket is: #12241 (VirtualBoxVM Application can't quit) – Oracle VM VirtualBox
    And today a dev posted an explanation:
    The problem is two-fold. The first problem is that VBoxNetDHCP does not terminate automatically and prevents VBoxSVC from shutting down (4.3.0 regression). We fixed this problem and the fix will be available soon. The other problem is that the VBoxNetAdp KExt has to be disabled. This is a Mavericks regression and finding the fix is more difficult. We are working on it.
    Comment 4 describe a work-around:
    I have found that this problem (at least in my case) is caused by the host-only interface ("vboxnet0" on my machine). If I don't have a host-only interface active on a given VM, it will stop cleanly. If one is active, the "stuck" behavior will be exhibited, the VM will be unable to be Force Quit and will prevent shutdown or reboot from the GUI. The machine can, however, be rebooted or shut down from the command line via "sudo reboot" or "sudo shutdown -h now", although there is a significant delay before the actual reboot/shutdown occurs (up to a minute).
    I have also found that removing the host-only interface via "VBoxManage hostonlyif remove vboxnet0" will clear the condition and allow the stuck VM to finish its shutdown and disappear from the Dock.

  • Flash problem with Mac OSx 10.6.8

    I haven't been able to use Live stream since I updated to 10.6.8
    I have uninstalled and reinstalled Flash 11.1.102.55
    All softwares are uo to date
    And I don't have ad blocking installed or activated.
    Help!

    up

  • Starting up problem with Mac OSX 10.5.7

    My 1 GB external USB flash disk can't be recognized after upgrading my OS to Leopard from Tiger. I tried to use Disk Utility to repair disk permissions following the instructions I was told. But then every time when I restart, it came to a black DOS screen saying that "No bootable disk - please insert boot disk and press any key". I don't have a bootable disk!!
    I guess it's wrong to use Disk Utility to repair disk permissions. How can I solve this to go back to previous setting? I don't want to have to hold option key every time when I restart.

    I didn't get the answer after one day and one night, so I had to post another one to catch people's attention.
    Ok, I have figured out the issue by myself. The solution Carolyn said in my another posting is wrong (or at least not detailed enough), I followed her instruction and got disk error message. I was so worried that I'll need to reinstall the system. My experience is that never use Disk Utility on your startup disk unless you start up from installation disk.

  • Cisco Connect does not run with Mac OSX Mountain Lion (10.8.2)

    When I first installed Cisco Connect that came with my E1500 router, I was running Mac OSX Snow Leopard (10.7) and it worked fine.  I upgraded my OSX to Mountain Lion and now when I start Cisco Connect, I get:
    Unsupported operating system
    The router software supports these operating systems:
    - Mac OS X 10.5.8 or later
    - Mac OS X 10.6.1 or later
    - Mac OS X 10.7 or later
    I saw some other thread/info/download on Cisco Connect with Lion (10.7) but nothing for Moutain Lion (10.8) - is there a fix forthcoming?
    Thanks
    Gary

    All i want to do is disable the guest function through cisco. i live in an apartment and everyone logs into my guest account. i was at my neighbours and they were laughing saying they done need to subscribe for the internet cause they just log onto local wi fi. and mine is one of them. i dont know if that'll slow down my internet with so many people using it. but all i want to do is just avoid it all together and get rid of it. but in this case i am having the same problem as all of you. to disable the guest function you need to go through cisco connect and it is not compatible with mac osx mountain lion. grrrrrrr

Maybe you are looking for