Linksys E1000 Cordless Pone Interference

Router Stops working when cordless phone is used.  Once phone is not in use router starts to work.  How do I stop this interference?

Change router to a different wireless channel.

Similar Messages

  • Please help re-set up my linksys e1000

    I set up my linksys e1000 years ago and haven't had a problem.  Yesterday, it was accidentally unplugged.  Now it no longer works and I do not have the CD.  How can I get it set up again?  Please be specific because I am pretty clueless here.
    Thank you!

    If you do not have the cd then you will have to go for manual troubleshooting. You need to identify whether you have cable or dsl internet service, Then you may follow the steps found on the links below depending on what type of internet connection you have:
    Title: Setting up a Linksys router for DSL Internet connection
    Article ID: 3687
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
    Title: Setting up a Linksys router with Cable Internet service
    Article ID: 3686
    http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3686

  • I'm having trouble using a Linksys E1000 Router

    I purchased a Mac in November. Love it so far with a few minor exceptions.
    I changed routers because I was having speed/connection issues.
    Switched from a Netgear to a Cisco Linksys E1000 which I had purchased a couple of years ago for a PC that i replaced with the mac. The software with the Linksys says it cant be used with the version of the new mac Mac OS X 10.7.2.
    Any suggestions?
    Thanks,

    I gave up on Linksys some time ago. I had a lot of trouble with their routers, and a very frustrating useless experience trying to get tech support help. I found one a few days ago while doing some spring cleaning and threw it out. Not worth the trouble.
    I got a refurbished airport express and it works great.

  • Toshiba Thrive tablet connects to Linksys E1000, but can't browse internet

    HELP!  I bought my wife a Toshiba Thrive 16GB tablet for Christmas and have spent 3 hours being bounced back and forth between Toshiba and Cisco support! 
    I have a wireless network with a Linksys E1000 router.  I'm using WPA2 Personal security, MAC filtering is turned off, and all other settings are basically default.  I have updated it to the latest firmware version (2.1.02).  I have 2 laptops, a wireless access point for my DirecTV DVR and WII (with a switch in-between) and an Apple IPhone 4.  All of these devices have NO problem connecting wirelessly to the router and browsing the Internet.
    I set the tablet up, connected to my network (checked the password and security settings 6 times).  The tablet shows that it is connected to my local network.  However, when I try to access the Internet, it hangs.  Fortunately, there is some idiot in the neighborhood who has an unsecured network.  I connected the tablet to that network and VOILA! I was able to browse, download the latest updates for the tablet, etc.
    So, I thought, OK, let's disable all security on my router, so I set the wireless security to "disabled".  Saved, and restarted.  The tablet STILL won't browse the internet!
    I'm tired of being tossed back and forth with techs who are clueless.  Has anyone had any problem similar to this with an Android-based device?
    I would think that if the tablet is accepted with its credentials that it would allow internet access!  One final thing that I tried was turning on MAC filtering and allowing access using the MAC address and that still didn't work.
    When I look at the details of the connection on the tablet, it shows a strong signal, the SSID name, and the IP address that it was assigned by DHCP.  I hope that someone can help, otherwise I'll have to go back to Best Buy and exchange it for some other tablet.  I purposely bought this one over the IPad2 because the battery can be swapped out for a freshly charged one and the memory can be upgraded to add up to 128GB with a SD memory card.
    Any help is appreciated as I have torn out the few remaining hairs on my head! <LOL>
    MIACLOCKMAN

    I'm replying to my own posting as I have solved the problem and wanted to post it in case anyone else has the same problem.  I would venture to say that upcoming updates to the Android system may solve this problem.
    For some reason, when the Thrive is set for DHCP ip addressing, it is not going out to the internet.  So, I changed the network profile to manual with a static IP address.  I also input the router address and DNS addresses with the router's IP address.  As soon as I saved the changes it was magic.  The tablet connected and internet speed was lightning fast.
    So, anyone having problems, give this a try as you'll not get anywhere with Cisco or Toshiba support.

  • Linksys E1000, make connection only to one web page

    Hi,
    I have Linksys E1000 wireless router . I would like to know or it's possible to make - other people, who find my wireless connection can connect only to one my personal web site. Maybe you know how make that and you can help me.
    Thank you in advance

    Sorry, this is not possible.

  • LinkSys E1000 invalid static route!

    Hi I'm from Russia
    Your product is stable but not profitable
    For the price your customers is easier to buy a model Zyxel
    Correct firmware for the static route, or Dynamic Routing (RIP)
    LinkSys E1000
    Enabled - Dynamic Routing (RIP) NO RESULTS!
    ZyXEL KEENETIC LITE - automatic routing!

    What exactly you are trying to do? Since, all Linksys routers are set to Class C subnet.
    If you will try to enter IP address of different Subnet the router will not respond..

  • Linksys E1000 suddenly stopped connecting PPPOE

    Hey...I have a Linksys E1000 router just upgrade to the latest 2.1.0.2 firmware...I have a PPPoE connection which used to run smoothly on the router..however off late...suddenly the router stopped connecting..it always shows "connecting" in the status tab of the router page...and eventually says failed to obtain IP address...however when I attach the cable directly into my PC it works just fine.
    I also had a word with my internet provider...he's kept the MAC open (or something like that)  so he said that isn't the issue and he keeps saying there must be some issue with the router. However, occasionally the router DOES connect for half hour or so and then just refuses to connect again !..
    I'm not sure as to what the problem is...I did see a similar post in the forum with the exact same problem but there was no solution given in that post! Also, all three lights on the router are present when I connect the cable to the router!
    Please help!

    Darshil07 wrote:
    Hey...I have a Linksys E1000 router just upgrade to the latest 2.1.0.2 firmware...I have a PPPoE connection which used to run smoothly on the router..however off late...suddenly the router stopped connecting..it always shows "connecting" in the status tab of the router page...and eventually says failed to obtain IP address...however when I attach the cable directly into my PC it works just fine.
    I also had a word with my internet provider...he's kept the MAC open (or something like that)  so he said that isn't the issue and he keeps saying there must be some issue with the router. However, occasionally the router DOES connect for half hour or so and then just refuses to connect again !..
    I'm not sure as to what the problem is...I did see a similar post in the forum with the exact same problem but there was no solution given in that post! Also, all three lights on the router are present when I connect the cable to the router!
    Please help!
    I believe something is not working well here on the router, I suggest you update the firmware then reset the router (press the reset button) then manually reconfigure it. You may download the firmware from this site, http://homesupport.cisco.com/en-us/support/routers/E1000

  • Linksys E1000 cannot ping gateway unless I unplug/replug WAN

    I have been using this router for the last six months and never had a single problem. Then yesterday out of nowhere internet stopped working and I was not able ping my ISP gateway (both wired and wireless) [Received: Destination host not reachable on both Windows Vista / 7]. Rebooted the router but still no luck. Unplugged / Replugged the net connection from the WAN port and then finally ping was successful.
    Now the weird this is every time I power on the router the Internet does not work and ISP Gateway seems not reachable, but if I unplug/replug the WAN connection the ping reply starts and internet works without any problem.
    I have updated the firmware to the latest version (2.1.02 build 5May 6, 2011), disabled SPI  firewall and tried changing the MTU value but still no luck.
    Another unusual thing I have noticed is that during the router boot up the WAN port LED blinks a lot faster than usual. After I unplug/replug the wan connection the blinking rate seems to be normal.

    My ISP Gateway uses a completely different IP address 172.16.x.x, while my router has the default IP setup 192.168.1.1. The thing is I am able to ping the router IP, but not the ISP Gateway IP unless I unplug/replug WAN.
    I googled around quite a bit yesterday and found that others have also had similar problem.
    http://homecommunity.cisco.com/t5/Wireless-Routers/Power-Outage-Linksys-E1000-router-lights-blinking...

  • Linksys E1000 continually loses connection

    I recently upgraded from a Linksys WRT54G2 that was a dream and gave me no problems at all to a Linksys E1000 that isn't behaving. Every hour or so it loses its PPPoE connection to the internet, so that both wired and wirelessly connected computers lose access. My laptop is also thrown entirely off the wireless network all together.
    This is very annoying, as I occasionally play online games where this sort of thing is highly disruptive, and I also remote connect to a desktop at home and work on there and don't like being dropped. Is this something that I'm going to have to wait for a firmware release to fix or is there something I can do now to fix it?

    One possible Solution to this:   
    In the wireless settings, the one where you can choose Mixed mode b/g/n etc,  make sure that the channel is set to a fixed number that works with all of your devices,  i.e. do not set it to Auto.    you can have auto or 20 mhz or 40 mhz for the channel frequency setting but dont set the channel number to auto.  from random trials i chose 5 as it worked with almost every wifi devices i have. its best not to go above single digits. I believe this is also true for many other routers out there. if you wanna know why you can read on below.
    This is the cause of all the problems in this thread i believe.and this following solution worked for me every time, hope it works for you too:
    every now and then i used to have the wifi router disappeared and couldnt even find the SSID, only ethernet connected computers can connect with the router.  
    one time i realised that my computer has the connection but my nexus s doesnt, couldnt even see the SSID, so i looked up on the internet and found stuffs about the different specs of wifi chips and what they have to do with the channels.
    Apparently some wifi chips have different channel settings so there may be cases where one device still has the connection and the other couldnt see the same wifi network.   
    So thats where I went to isolate the problem on my router settings testing all the different settings i could to get my nexus s to see the SSID, finally it was the channel numbers lower than 10 that did the trick.
    hope that helps anyone out there before they think that this is a more complicated issue ^^"

  • Wii connection problems CISCO LINKSYS E1000

    I am trying to connect to my wii with my wireless routed it is a cisco linksys e1000 and and I tried connect and it said error so I went to manual set up.and couldn't figure out the codes to enter I couldn't find the disco codss on the nintendo website. Please help me I.really wanna.connect my wii to the Internet

    Well the situation is not well elaborated. What is the exact ERROR you are getting while trying to connect your Wii? What code are you talking about? It might be asking to put 8 digits pin number which is on the Linksys E1000 itself.

  • Linksys E1000 No Password

    I bought a Linksys E1000 wireless router a year or so back. it was loaded onto a computer that no longer works. i have the router and the box but no disc or manual. My laptop and ipad are working fine with the router but i can't get my iphone hooked up and dont think i have the correct password. I dont have any software on my laptop to even figure it out. What can i do to get my phone to use the router?

    Using the laptop, you can access the router's page to get your network password. On your browser, go to http://192.168.1.1 and log- in using "admin" for password (no username). From there, go to the wireless tab and click on wireless security. You should be able to get your network key from there.

  • Linksys E1000

    I am considering buying a Linksys E1000 router to replace my faulty Netgear item. I see that the Linksys unit supports b/g & n wireless speeds.
    My current Netgear router also supports the "n" band however if I have it set to the "n" band, it will not let my old pda, which only has a "b" wireless card, connect to connect to it.
    Will the Linksys E1000 router allow my faster wireless devices to connect at the "n" band speed whilst still still allowing my older devices to connect at the "b" band speeds simultaneously??

    In the Linksys E1000, you have the option to set it to N only, B/G only or mixed. By default, it is on mixed mode meaning, all wireless devices using N, B and G cards will be able to connect.

  • Comparing routers (the Linksys Valet M10 and The Linksys E1000)

    I was wondering What would be better for 2 consoles and 1 wireless adapter Desktop for Internet use (an M10 Valet or A Linksys E1000? And why that would be better

    Well is the features for E1000
    Features
    • Give visitors simple and password-protected Internet access
    • WPA, WPA2, and other enhanced security features
    • Stream your stored content to devices around your home
    • Up to 300 Mbps wireless speeds*
    Minimum System Requirements:
    • Internet Browser: Internet Explorer 6, Safari 3, or Firefox 2 for Optional Browser-Based Configuration.
    • PC: Wireless Network-Enabled PC with CD or DVD Drive, Running Windows XP SP3, Windows Vista SP1, or Windows 7
    • Mac: Wireless Network-Enabled Mac with CD or DVD Drive, Running OS X Tiger 10.4.11, Leopard 10.5.8, or Snow Leopard 10.6.1
    Here is the link for more information: http://homedownloads.cisco.com/downloads/datasheet/E1000_V10_DS_NC-WEB-3415-01476.pdf
    Here is the feature for M10:
    Features
    • Enjoy the speed and range of Wireless-N*
    • Link computers, games and devices to the Internet
    • Give Internet access to guests
    • Manage parental controls with ease
    • Easy Setup Key for worry-free setup
    Here is the link for more information: http://homedownloads.cisco.com/downloads/userguide/1224655305646/Valet_Valet_Plus_M10_M20_UG_US_V10_...

  • Does Linksys E1000 Support Windows XP SP2

    Hey guys, I before i buy the linksys E1000
    i just wanted to know that does it support windows xp sp2 because my pc supports that and i need to know because so i can install it or it will be a wast if i buy it
    thanks

    Routers are totally independent of operating systems.

  • Cisco Linksys E1000 Connection to Verizon Router

    OK here is the situation.  I spent two with a verizon tech on the following issue.
    I have new PC, windows 7, that I have connected via wireless Trendnet 150Mbps Mini Wireless N USB Adapater. The spped is less than 5Mbps download and upload.  My verizon plan is 25Mbps.  In the end it was determine that the verizon technology is g format and the adapter is n technology. The computer directly hard wired to the verizon router gets 30Mbps speed.
    Bought a Cisco Linksys E1000 N technology router to connect to the Verizon router.
    Connected to router and could not get any internet even though the signal strength was extremely good.
    Got any suggestion on how to get this to work.
    I am dying with this problem,

    When connecting the E1000 router to your fios one, i would use one of the 4 LAN ports and not the WAN port to make the Ethernet connection between the two. Then go into the router web page of the E1000 (192.168.1.X) and make sure that the DHCP server is disabled.
    Now for your speed problem. Even with wireless G you should still be fine as it can tranfer much faster than 5Mbps. The problem could be that the Trendnet usb adapter has a pretty tiny radio and your connection slows way down as you move away from the the wifi source.

Maybe you are looking for

  • How can I permanently clip video without changing filmstrip order?

    I have just recently upgraded from LR1.4 to 4.2 (Windows 7 OS) and one of the features I am most excited about is being able to work with video in LR. I started clipping videos but I know LR is non-destructive. This is great for my photography but wi

  • Error while deploying composite using AID

    Hi All, We are getting the following error while trying to 'ant' deploy a composite in our TEST instance which was recently upgraded to 11.1.1.5: [echo] === Executing Deployments of /oracle/product/Middleware/AIA/Infrastructure/LifeCycle/DP/WBSExtrac

  • FM for uploading data into internal table from Excel sheet

    Hi, I have a slight problem in one of the function modules that I have created. Actually it has been copied from a standard SAP function module “KCD_EXCEL_OLE_TO_INT_CONVERT”. Now my created function module is throwing me a dump suggesting “Data obje

  • Lightroom database size limit?

    Is there anything that may limit the size of a Lightroom catalog (like in iView)? It's not a problem I'm having, just wondering what happens when my 50k image collection grows to 200k or more. Will there ever be a NEED to maintain more than one catal

  • HT1338 how do I look at files by file size?

    how do I find the largest files to erase and gain hard drive space?