Linksys E1000, make connection only to one web page

Hi,
I have Linksys E1000 wireless router . I would like to know or it's possible to make - other people, who find my wireless connection can connect only to one my personal web site. Maybe you know how make that and you can help me.
Thank you in advance

Sorry, this is not possible.

Similar Messages

Can only access one web site

I can only access one web site . www.cisco.com. I am connected to the internet via a lynksys DSL Router, I am using dhcp and NAT from the Lynksys note:works fine for 3 other windows based pc's.
when I try to connect to any other site the page Hangs during load and neve displays.
I can ping all of the web sites that do not come up
I am using a SunBlade 100 and did a new install. I tried the install with webstart and had the same result during the install. again I can only open sucessfully www.cisco.com.

Hello!
I am getting this error, but the above fix does not solve the issue, however I do know what has caused it.
I have an edmx file in a WCF webservice which feeds a silverlight app. The edmx is quite complex and a bit fragile, but was working fine up until I introduced our Industry Codes view into the model. The view is basically { ID, ParentID, Name, ... }. In my model I have created an association to itself which describes Children(*)/Parent(0/1) so I have a nice and tidy hierarchical structure. The edmx and the service build without any errors - hurrah! However, when I update the service reference I then get the below error (and a whole load of others as none of the webservice objects exist anymore):
Error 21 Custom tool error: Failed to generate code for the service reference 'WCF_ContactAdmin'. Please check other error and warning messages for details. X:\2008-054 ContactAdmin_Silverlight\Contact2_Admin_Silverlight\Service References\WCF_ContactAdmin\Reference.svcmap 1 1 Contact2_Admin_Silverlight
When I try the fix mentioned in the link above this error disappears, but then so do all the objects in the datamodel, so I cannot continue from there.
Having the hierarchical data objects defined in the EDM will make like so much easier in future, any help will be greatly appreciated, thank you!!
Tim
Web Developer at Terrapinn

Showing applets depending upon user input in one web page

hi, I have three applets. I want to create a webpage, put three buttons (or other interactions) on it. If button one is clicked, applet one is shown. If button two is clicked, applet two is shown. I want this to happen in one web page only and one applet at a time depending on user input. Is there a way to do it? Do I need to use javascript? I am new to javascript ,but if you can point me to relevant javascript topics, i am willing to learn it. Thanks.

There are a couple of ways I can think of off the bat...
1) Create an IFrame that the Applet will be displayed in. The button you press submits a form whose target is the IFrame and whose action is a page with the correct Applet.
2) Actually load all 3 Applets on the page and hide them all in a invisible divs. The button calls a javascript function that unhides a specific div (and hides all the others to be sure only one is displayed at a time).
3) Uber-javascript AJAX like control that when the button is pushed makes a request to a page that returns the applet tag which the javascript control then inserts into the page at the proper location.
I would toss up between 1 & 2.
For code, search Google for important key words (like "form target iframe", or "javascript make divs invisible").

How do I have more than one web page on at a time?

I can only watch or use one web page at a time. I f I try to get on something else it will knock me out of what I was doing on the other page.

reboot in safemode and repeat the same behavior you did previously. If it works then it's likely an addon issue or extension causing your problem.
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

I have a 3G Ipod, for the longest time I have not been able to connect to the apple server. I am able to connect to wifi, grouse web pages however canot conncet to iTunes. I have rebooted, any every other thing I can think off.

I have a 3G Ipod, for the longest time I have not been able to connect to the apple server. I am able to connect to wifi, grouse web pages however canot conncet to iTunes. I have rebooted, any every other thing I can think off.

Can't connect to the iTunes Store
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HAVE ONE WEB PAGE OPEN AND SUDDENLY ANOTHER WEB PAGE OPENS

I can have one web page open and suddenly another web page will pop up. Why? It doesn't happen all the time. Like I said suddenly.

Another thing you can try doing is scanning for Malware:
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]
Download and Run TDSSKiller [http://support.kaspersky.com/faq/?qid=208283363 http://support.kaspersky.com/faq/?qid=208283363]
Download and Install Microsoft Security Essentials [http://windows.microsoft.com/en-US/windows/products/security-essentials http://windows.microsoft.com/en-US/windows/products/security-essentials] (not an official endorsement, but I personally recommend MSE as an awesome permanent anti-virus)
Double check for all Windows Updates.
What is the website that opens up? Is it always the same, always different, one of a few, etc?

How to open only one web page at a time?

I used to have it set so when I opened a new web page, the previous one closed. Now, nothing closes automatically and I have about 50 pages open that I have to close. How do I set it so that only one page opens at a time?

HI Janice,
You can use a keyboard shortcut to close all windows in Safari. CommandShiftW.
To close one window, Command + W.
Carolyn

Only one web pages is slow - on another pc on same lan it opens fast

Hi,
Am running Firefox 29.0.1 on a Windows 7 pc. One particular web pages takes over a minute to load. On the same LAN I have another pc running Firefox 29.0 on Ubuntu (Linux) and it opens the same web page in a matter of seconds.
On the Windows 7 pc I have cleared the cache, cleared cookies but still the one page gives problems.
Web pages is http://www.stuff.co.nz
Any ideas to fix the problem would be very much appreciated.

[[Firefox is slow - How to make it faster]]
# Open the History on the computer that is slow.
# Search for all of the pages with that domain name.
# Delete them
# Reload the page.
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having.

In 3.6.8,One web page turns into 10 or more reloaded pages of the same in my history, how to fix?

This happens mainly when I'm in a MSN web page. For instance, I'll click on a link in the news section, and I'll notice that once the page is loaded the loading circle is still spinning...and spinning...and spinning. When I go to use the Back button, nothing happens. I look at the history and 10 copies and counting of that same page are listed there.
Please advise as to how to fix. It's kind of annoying.
Thanks!

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Create a new profile as a test to check if your current profile is causing the problems
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Connecting to Document from web page

I created a one page order form, copied the link on my web page, when I click on the link it connects to Adobe however the page is blank.

Navy Bubblehead wrote:
Here is the link:
http://<a href="https://acrobat.com/#d=4ELTT*FpRYyqzUDNi1Z3Ww">
Perhaps you want this link:
<https://acrobat.com/SignIn.html#d=4ELTT*FpRYyqzUDNi1Z3>
Good luck.

How to make a call from a Web page

How can I make a call from a number on a Web page ?
If I select the number, I can only copy it ... then I cannot cut and paste into the phone dialing section ???
I thought that by selecting the number on the Web page and holding it this would trigger the dialing ... like I used to do with my 9900 Bold BB.

Are you holding the number or just pressing it quickly? Holding anything will produce a menu whose options would include cut & paste but just pressing the number should activate an action, in this case dialing the number.
Try just pressing the number with a normal press and not holding it and post back with your results.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

I can't copy/save pictures of items on ebay. I can only save the web page. I can copy/save with IE. Why?

On items listed on ebay, you can click on a picture to enlarge it. With IE I can save the picture to my computer. Firefox only allows me to save the web page. What can I do to save pictures - .jpg or .bmp?
The same problem happens if the seller includes pictures in the text description.

Now I cannot create a screenshot because the massage doesn't appear anymore.
I was told that this is not my problem only. Is it the recent update that broke somethng? I've all the accounts configured correctly, MT just doesn't send or download messages.
I tried to remove one of my accounts to re-set it, but when I tried to configure it once again Mozilla rejects it claiming the password is wrong. I triple checked, it's correct.

Connect java to php web page

Hello...
I am new in this forum, so I am sorry if I post my question in wrong place.
I have php web page and want to call my java classes i.e connect java to php. My java code will read from file some info. then will organize these info. finally, the java will write the organized info. in file, the php will display the content of the file.
can help me please to achieve this goal...
thanks in advance
ibtesam saleh

I do not how to use JPoller, put it looks very advanced.
Or you can use a simple code in (java/perl/c/what so every u know)
void main(){
while (true) {
checkDirectoryAndReadNewCommandsAndWriteNewOutputs();
Thread.sleep(waitTime);
}and put your program on your windows/linux startUp
Or you can learn using sockets in java and write your own html service with port 80 (I did some experiments)
Or you can try to use WebService example from Netbeans program (I tried it worked for me)
Or you can learn J2EE (I have never find the time to look at)
Or ... many ideas, to time :)

How do I get the PDF Convert feature of Adobe Acrobat Pro Extended 9.4.4, which makes a PDF of a web page interactive, to work in Firefox 4.0.1?

I just installed (on my Windows 7 Ultimate (64 bit) operating system/Intel i5 CPU M560 2.67 GHz) and am now using as my default browser Firefox 4.0.1 because Internet Explorer 9 was giving me so much trouble--lack of display of web content, lack of PDF reproduction when web content displayed, screwball formatting display, etc., all of which has been remedied by the mere installation of Firefox 4.0.1.
How do I get the PDF Convert feature of Adobe Acrobat Pro Extended 9.4.4, which converts a web page to an interactive PDF, to set up and work on Firefox 4.0.1?

You can not do that using Adobe Acrobat 9. Adobe never made a create PDF add-on for Firefox for use with Adobe Acrobat 9. They created a Firefox add-on for use with Acrobat X, but currently that one does not work with Firefox 4 though Adobe are working on an update.

Add TWO Edge Animations/Stages to ONE web page (without using oam)

Hi All,
This is a bit of a follow on question for those who are adding scalable height/width edge compositions to web pages using the awesome piece of code created by Sarah (http://sarahjustine.com/) and other forum contributors... (attached code below).
My question is: How do I add a second Edge Animate composition to the same page using this method? So it's using "Stage" already... i'm guessing it's a matter of changing it to "Stage_02" etc in the following code? I've tried changing the relevant code but so far I have been unsuccessful in getting it to recognise a second stage.
Any help would be appreciated, many thanks in advance for your time.
Jeff
Index.html

    <script type="text/javascript" charset="utf-8" src="clouds_edgePreload.js"></script>
    <style>
        .edgeLoad-EDGE-78729757 { visibility:hidden; }
    </style>

<div class="stagewrap">
        <div id="Stage" class="EDGE-78729757">
        </div>
</div>
Adobe Edge Stage Script
var stageHeight = sym.$('Stage').height(); // Set a variable for the height of the stage
sym.$("#Stage").css({ // Set the transform origin so we always scale to the top left corner of the stage
"transform-origin":"0 0",
"-ms-transform-origin":"0 0",
"-webkit-transform-origin":"0 0",
"-moz-transform-origin":"0 0",
"-o-transform-origin":"0 0"
function scaleStage() {
    var stage = sym.$('Stage'); // Set a reusable variable to reference the stage
    var parent = sym.$('Stage').parent(); // Set a reusable variable to reference the parent container of the stage
    var parentWidth = stage.parent().width(); // Get the parent of the stage width
    var stageWidth = stage.width(); // Get the stage width
    var desiredWidth = Math.round(parentWidth * 1); // Set the new width of the stage as it scales
    var rescale = (desiredWidth / stageWidth); // Set a variable to calculate the new width of the stage as it scales
// Rescale the stage!
     stage.css('transform', 'scale(' + rescale + ')');
    stage.css( '-o-transform', 'scale(' + rescale + ')');
     stage.css('-ms-transform', 'scale(' + rescale + ')');
    stage.css('-webkit-transform', 'scale(' + rescale + ')');
     stage.css('-moz-transform', 'scale(' + rescale + ')');
    stage.css('-o-transform', 'scale(' + rescale + ')');
    parent.height(stageHeight * rescale); // Reset the height of the parent container so the objects below it will reflow as the height adjusts
// Make it happen when the browser resizes
$(window).on('resize', function(){
     scaleStage();
// Make it happen when the page first loads
$(document).ready(function(){
    scaleStage();

I also met this question, have you solved this question? Jeff

Linksys E1000, make connection only to one web page

Similar Messages

Maybe you are looking for