Linksys e1000 router blinking all lights steadily not functioning

Somehow in the process of researcing how to add my new laptop to the router, the router quit working and is now just blinking the blue panel lights.
I was attempting to download Cisco Connect to my flash drive and instead it began to execute and I aborted that in about 10 seconds.
Wondering if just that messed up the original setup which was working fine..
Thanks,
jim

Well go ahead and try resetting the router by pressing and holding the reset button in back for 30 seconds.

Similar Messages

Audigy 2 NX all lights flashing, not function

Hello,
For the past few days the audigy2nx has been playing up, ie randomly disconnecting from the PC and so on. Usually solved with nothing more than a restart. Tried to turn it on today though and nothing happened. None of the lights came on at all. Then all the lights started blinking about every 2 seconds. Pulling the power and reconnecting makes no difference.
Whats going on? Has this spat the dummy permanently?
Cheers,
Ben

I had the same problem come up a week ago. My audigy nx has run perfectly then suddenly this. But I followed the advice here, bought a new adaptor. It made the card work again, but I had to reinstall the MediaSource software, and now I can't get proper sound. Although MediaSource is loaded, there's no bar on my desktop and if I try to open it from Programs menu or My Computer nothing happens. It's all installed, but for some reason my pc no longer seems to acknowlege it.
I've uninstalled and reinstalled several times, gone back to a former date on System Restore, but I just can't get it to function. Really frustrating, as the card appears to be functional, and until now its worked perfectly for 2 and a half years.
Can anyone help with this?

First time startup- Blinking amber light. Not sure what to do.

So I just got my airport express and when i first started getting the airport utility downloaded for windows xp, i used my modem (time warner ubee modem) ethernet cable and all but I am just getting a blinking amber light. I don't know if it hasn't configured if I need to wait longer for to initally start. I am kind of derp when it comes to networking, so..

A persistent, flashing amber light indicates that any of the several potential conditions may require your attention:
The base station has not yet been configured because it is new, or the reset switch has been set.
You have selected a security configuration that is not recommended.
One of several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.
(ref: http://docs.info.apple.com/article.html?artnum=305101)
If you run the AirPort Utility, it will show an amber circle on the summary page next to the area(s) causing the problem. Click on this amber circle and it should provide an explanation. Please post back your findings.

Problem finding Linksys E1000 router

Hi all.
I just purchased an E1000 router for my brothers computer. He has Comcast as his ISP so i was trying to set up the router and clone his IP address as per other instructions i have read online when dealing with Comcast. However i can not gain access to his router via the 192.168.1.1 address or the CD setup. They both say router not found.
I know the cable is good because i take it directly out of the cable modem and plug it into the "internet" port of the router. I've also tried it in port 1 of the lan side and still can not get acceess. I havent tried the router on another computer yet but since his is the pc i want it to work with, i have to get it to work on that one. I've also tried restarting the pc after the cable was connected.
Any help is appreciated.

Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router.
Connect the modem to the Internet port and computer to Ethernet port 1 on the router. Open the setup page of the router. Clone the MAC address of the main computer and save the settings. Unplug the power cable to the router and modem. First plug in the power to the modem and wait for 1 minute. Plug in the power cable to the router and wait for 1 minuter. Try to access the Internet through the router.

F4280 - All Lights on - Not Printing & I'm stumped

I have an F4280 all in one printer and it is not doing a thing. The Mrs was doing some thing the other day and since then it has not worked. There was the same item in the print queue where she has repeatedly hit print.
All the lights are on, no blinking, and the No. Copies is showing 8.
Unit has been disconnected from the pc and mains for over 24hrs but still no joy.
Any help greatly appreciated.
Cheers

If the power cable is connected to a surge protector/power strip, then connect it to a wall socket. If it's already in a wall socket, then connect it to a different wall outlet and see if the issue occurs. If all lights still turn on, then unplug the power cable from the back of the printer, then press and hold the Cancel+Paper Type buttons, and then plug the cable in. If this doesn't resolve the issue also, then call HP to get the printer serviced.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

I'm having trouble using a Linksys E1000 Router

I purchased a Mac in November. Love it so far with a few minor exceptions.
I changed routers because I was having speed/connection issues.
Switched from a Netgear to a Cisco Linksys E1000 which I had purchased a couple of years ago for a PC that i replaced with the mac. The software with the Linksys says it cant be used with the version of the new mac Mac OS X 10.7.2.
Any suggestions?
Thanks,

I gave up on Linksys some time ago. I had a lot of trouble with their routers, and a very frustrating useless experience trying to get tech support help. I found one a few days ago while doing some spring cleaning and threw it out. Not worth the trouble.
I got a refurbished airport express and it works great.

MY LINKSYS WIRELESS ROUTER STOPPED WORKING AND WILL NOT CONNECT !!!! HELP

SIMPLE FIX : PRESS AND HOLD THE RESET BUTTON FOR 30 SECONDS. THE RESET BUTTON IS LOCATED ON THE BACK OF THE LINKSYS MODEM. DONE !!!!!!! YOU'RE WELCOME !!!!

Maybe one fix however there maybe other problems or interferences that may cause devices not to connect or inhibit proper router operations. Entails more troubleshooting then doing a factory reset. Sometimes it could help though.
Thanks for your suggestion though.

Thinkpad R52 - Battery blinking all the time, not charging

Hi,
My laptopt IBM thinkpad R52 not charging battery (always blinking in orange led), I tried to replace the battery by a new one and charging all night but unfortunately the problem persists, the same problem.
Always the battery led is blinking.
Any suggestion? What do you think?
I don't have any idea what is the problem?
Thanks in advance.
Jaume.-f

Welcome to the forum!
If the second battery is a *known good* example that charges in another machine, then the charging circuit on the motherboard has been damaged.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Cisco Linksys E1200 Router says ethernet cord is not connected

Hello,
I first had issues when there was a large thunderstorm that passed through the area. Lightning struck in my complex, and caused a large powersurge to go through my building. My router is plugged into a surge protector so I figured that it would be okay. The internet was out for a few days, and I only realized it came back when I plugged the ethernet cable directly into my laptop.
I have tried unplugging the router and waiting for a few minutes, then plugging it back into the power sources, then plugging the ethernet cable back in. To no avail, the internet is still unavailable to me wirelessly. I have tried different ethernet cords with no success. I reset the device to factory settings and have tried to set it back up with the CD and still no success; it does not recognize that the ethernet cord is plugged in.
I've had this router for about 2 years now and never had any problems till now. What can I do to fix it, if anything? Or do I need to just get a new one? Thank you!

Power surge blew the Internet Port on the router. In this senario the power surge came in via the ethernet internet connection as well. You will have to replace the router.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Does airport card (origional) support linksys e1000 router?

I just got and airport card for my old mac, and want to use it with my network. but it won't work with my network. Is there any fix for this? software?

There is a Safari 2.0 download, however it won't run on OS 10.2.
Suggest you look at some of the browsers on this site http://mac.oldapps.com/
 Cheers, Tom

Captivate 7 question - slide with audio and light boxes not functioning properly

I am currently working a project and cannot figure something out.
I have a slide with 9 smartshape buttons on it. When each button is clicked it brings up a lightbox. Each lightbox has it's own close button. When the lightbox is closed by the user then the user immediately sees the 9 button screen and can choose another button to view and read, and so forth. I have the lightboxes working fine.
Now, I added text to speech. It is a mere 15 seconds in length, but it contains some important content and the directions. I want the text to speech audio to stop playing if the user goes ahead and clicks on one of the 9 buttons which then brings up a lightbox. I want the audio to then resume when they close the lightbox. OK I have all of that working in a technical sense.
I've also tried this advanced action, but this stops the Audio entirely, however it does solve the autoadvance issue. so I am just trading issues.
I also have "back and next" nav buttons on the slide, so the user must click one or the other to proceed off the slide. Ok those worked.
Here is the issue. Once I added the text to speech audio, at the end of 17.3 seconds, whatever lightbox the user may be viewing and they hit the close lightbox button, captivate automatically sends the user to the next slide. No clicking "Next" or anything. I can't figure out why this is occurring.
Prior to adding audio the slide worked as it should with the user being able to click each of the 9 buttons to "read some info" then close it and click another button on the slide, etc. They could do this in any order they wanted.
When I added the audio, I set the advanced actions so if a user clicked on one of the buttons, the audio would stop playing until they came back to the main screen. Ok no problem getting that to function - except it stops functioning at the end of 17.3 seconds.
What am I missing?
Thanks for any help!!!
Michelle

Correct I have only 15 seconds of audio with the slide. no audio with any of the light boxes. Those are "read only" light boxes.
If the user clicks a shape button early, before the entire audio has played, I want the audio to stop, so the user can read the lightbox info, then as they click back to the slide away from the lightbox, I want the audio to resume playing - so they can hear the rest of the audio. But, this is where is doesn't function properly as when the audio finishes playing at 15 seconds. The next shape button the user clicks on to shows the lightbox, but when they click to close the lightbox, the lightbox closes then sends the user to the next slide. They haven't had a chance to view any of the other shape buttons and the information found in those corresponding light boxes.
I hope this clarifies.
Any thoughts?
Michelle

Consolidate All Windows option not functional in Illustrator CC 2014

I just downloaded the Illustrator CC 2014 update, and I cannot for the life of me consolidate all my open documents to one window. In other words I want to dock all open documents to the top in tabs. In the regular CC version, if you have multiple documents in tabs in a floating window, you can go to Window > Arrange > Consolidate All windows, and it will dock all of those docs at the top in tabs. However in CC 2014 that option is greyed out and I can't select it. Anyone else experiencing this bug? Am I doing something wrong? (The first image is CC 2014, and the second is from regular CC, what I want it to look like.)

SUCCESS!! I figured out that you need the Application Frame option checked in order to achieve the layout I like. Silly me.

Sleep Indicator Light (SIL) not functioning

Hello,
I own a Macbook Pro 13" (Mid 2012 model).
The unit was purchased in March 2013.
However, I notice that the indicator of sleep (SIL) no longer works, and that already a long time.
Not when starting up the macbook, not when the macbook is brought into sleep mode.
This is the case both with OS X 10.8 (Mountain Lion), 10.9 (Mavericks) and 10.10 (Yosemite).
For problems with SIL Apple recommends to do an SMC reset.
I've done this, without success.
Other suggestions / tests that can help me to solve the problem?
Kind regards.

Have you tried to reset the Power Management Unit (PMU)?
http://support.apple.com/kb/HT1431?viewlocale=en_US

All buttons are not functioning!

The only thing that functions on my Curve is the trackball. I've taken the battery out and put back in, but that didn't do anything. Any suggestions????

Remove the battery and place the device in a warm place for a few days, such as on top of a warm piece of stereo or electronic equipment or place the device in a bag of uncooked rice. Give it a few days to dry out and then try it again.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Linksys E1000 suddenly stopped connecting PPPOE

Hey...I have a Linksys E1000 router just upgrade to the latest 2.1.0.2 firmware...I have a PPPoE connection which used to run smoothly on the router..however off late...suddenly the router stopped connecting..it always shows "connecting" in the status tab of the router page...and eventually says failed to obtain IP address...however when I attach the cable directly into my PC it works just fine.
I also had a word with my internet provider...he's kept the MAC open (or something like that) so he said that isn't the issue and he keeps saying there must be some issue with the router. However, occasionally the router DOES connect for half hour or so and then just refuses to connect again !..
I'm not sure as to what the problem is...I did see a similar post in the forum with the exact same problem but there was no solution given in that post! Also, all three lights on the router are present when I connect the cable to the router!
Please help!

Darshil07 wrote:
Hey...I have a Linksys E1000 router just upgrade to the latest 2.1.0.2 firmware...I have a PPPoE connection which used to run smoothly on the router..however off late...suddenly the router stopped connecting..it always shows "connecting" in the status tab of the router page...and eventually says failed to obtain IP address...however when I attach the cable directly into my PC it works just fine.
I also had a word with my internet provider...he's kept the MAC open (or something like that) so he said that isn't the issue and he keeps saying there must be some issue with the router. However, occasionally the router DOES connect for half hour or so and then just refuses to connect again !..
I'm not sure as to what the problem is...I did see a similar post in the forum with the exact same problem but there was no solution given in that post! Also, all three lights on the router are present when I connect the cable to the router!
Please help!
I believe something is not working well here on the router, I suggest you update the firmware then reset the router (press the reset button) then manually reconfigure it. You may download the firmware from this site, http://homesupport.cisco.com/en-us/support/routers/E1000

Linksys e1000 router blinking all lights steadily not functioning

Similar Messages

Maybe you are looking for