Linksys E1200 No Longer Working After Verizon Modem Replacement

I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't help. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem? Any advice how to proceed from here?

JHStup wrote:
I want to add that I:
1) Have not yet tried returning my router to factory settings. (Is this step necessary? Is this usual, that the router needs to be returned to factory settings if the modem it was formerly connect to changes?)
2) I did do all of the power-down/reboot modem instructions per the router's software instructions.
Hello, yes reset and reconfigure. Just download the latest version of Cisco connect 1.4. That will set up the router for you and will update the router if needed. You can download it here http://homesupport.cisco.com/en-us/support/routers/E1200.

Similar Messages

  • E1200 Not Working after Verizon Modem Change

    I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
    I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't help. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
    At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem? Any advice how to proceed from here?

    Let me me check if i got this one right, when your computer is connected to yor router wirelessly then you were able to get online but when your computer was hardwired to the router then you were not able to get online. Can you check the ip address that you will get when your computer was wirelessly connected and hardwired to the router.

  • Ip camera app no longer working after iphone was replaced

    my wife has an iphone 4s. She accidentally had it in her pocket and put those clothes in the wash machine and fried her phone. we used insurance to replace it and restore her data. 
    i have a foscam FI9826W running app version: 1.4.1.9 and system firmware version: 2.11.1.10 that we have setup as our baby monitor/camera.  i have two other ipads and my iphone 5 configured to access the ip camera over my local network via wifi.
    the apps i am using on all devices are baby monitor by tiny solutions & live cam pro.  both of these apps work on all IOS devices except for my wifes replacement iphone she just got.  Her previous iphone 4s that ended up in the washing machine worked perfectly fine with these apps before it got wet.  The specific problem we are having is my ip camera is a PTZ camera.  all IOS devices are able to PTZ the camera without problems except, yep you guessed it, My wife's new 4s.  we can connect to the camera, see & here everything just fine, the we cannot PTZ the camera.  i have deleted the camera config and re added it on both apps, result no luck. i deleted the apps and reinstalled them then added the camera config back but still no luck. i have restored the phone to factory defaults, and then downloaded those two apps, configured the camera but still no luck. 
    4s is running 7.1.2
    app versions:
    livecam pro 3.9.5
    baby monitor 2.8.4
    internal camera on http: using port 88
    it has a wired Ethernet connection to my home router
    home router is an airport extreme running version 7.6.4 upstairs. and a Unifi AP running version 2.4.5.2077 downstairs. Currently all my IOS devices are connected to the Unifi AP. i have removed her device and had it re associate to the wireless network but still no luck.
    At this point i am stumped. i personally think it is the replacement phone, but need some more evidence to back up my theory so we can call support to hopefully get it replaced again.

    I recently stopped by the apple store and have fixed my mail app! The problem as described to me was caused by a installing apps. Turns out that apps can mess with Mail setting in some way and perhaps due to a bad setting or a bad combination of settings my mail application stopped working. The way I fixed it was to do a restore to New Iphone which, unfortunately, wipes everything! But after syncing back up including re-installing all of my apps, mail works again! Of course, I lost all of my notes, various settings, and lots of other stuff. Turns out that a simple restore, since it backs up your phone beforehand (backing up bad settings at the same time) is not the silver bullet but a full restore to new iphone probably often is. Hope this helps others.

  • Linksys router no longer works with Westell 6100 modem

    Hi all,
    I came back after a 3 month work absence (and many days power outages, according to the neighbors), to find that my system can no longer connect to the internet using the Verizon Westell 6100 modem to a Linksys wrt54G router to 2 PCs!
    I reset the Westell modem and directly connected the PC to it and THAT works okay, but put the router back in the mix (so I can connect my other PC) and nothing works!
    I have read on this forum about 'Bridgeing" the Westell modem but nothing about setting up the router.
    Can someone PLEASE give me explicit instructions on how to:
        1.)  set up the Westell modem in this "Bridge" mode,
        2.)  Set up the Linksys router to work with the modem again??
        3.)  Tell me why the old setup no longer works, did verizon change something for this modem?
    Thank you VERY much for your help in this matter!
    SUE  ;>)

    the router has two connections.  one is called a WAN and that is a wide area network, and it means the internet in your case.  and one is called a LAN, local area network.  
    what you saw means - that the way you connect to your internet is through PPPoE, a username and a password. 
    and then way your LAN connects is DHCP,  how all of your local computers connect.  This is important, because after you bridge the westell, you will be setting your Linksys up for PPPoE connection, and NOT DHCP.      if you don't do this step, then you will never connect.  
    that is fine, and normal.  if you follow the instructions at the link provided - you will be able to connect real easily.   
    you will want to bridge the westell just follow the instructions for "If your Westell uses the red and black Verizon firmware:"

  • IPad app no long works after upgrading to iOS 7.1.1

    iPad app no long works after upgrading to iOS 7.1.1

    Did you try deleting then reinstalling the app?  Sometimes developers will need to update their apps for compatibility.  If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

  • IPhoto no longer work after upgrading to Mavericks.

    My iPhoto will no longer work after upgrading to Mavericks. iPhoto will not update. How do I fix this?

    kmg55 wrote:
    Just upgraded and Iphoto will not work,
    Check that iPhoto is v9.5.1 (In Applications, highlight iPhoto, and ⌘I)
    If it is v9.5.1, then hold option-command and click the iPhoto icon and go through the repair steps.

  • Many Apps are no longer working after webOS 1.4 update! - please help!

    Hi,
    Many of my previously working Palm Pre Apps are no longer working after the webOS 1.4 update.
    Here are the ones that just return a blank/white screen after launching so far:
    SplashID
    Daily Devo
    Daily Light (Love)
    Absolute Fitness (some options no longer work correctly & are returning a white screen and some options are working)
    These are just a few of the Apps that I am having problems with and there are probably many others.  I have also sent emails/posted to forums on the developer sites to advise. Hopefully I will hear something back soon.
    Anyone else experiencing this issue as well with any Apps?
    Thanks in advance for any help that you can provide.

    SplashID on my Sprint Pre is showing just a blank screen after starting it and entering my password.  I see no update for it in the App Catalog.
    EDIT: Never mind.  It appears that it only did that on the first launch.  I closed it and restarted it, and now the screen in SplashID is correct.

  • HT2188 home button no longer working after upgrade to io6 on my iphone4...any ideas to fix this problem

    home button no longer working after upgrade to ios6 software on my iphone4..anything i can do to frix this or apple send me a new device.  phone no good without a home button

    The button's broken.  S**t happens.  Apple will replace your phone.  If in waranty it will be free of charge.  If not, you will pay $149. 
    You can elect to have it repaired at a 3rd party shop near you if you choose, but this will void all warranty if there's any left.

  • Canon iP2700 is no longer working after update

    My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2  from  https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
    tail -n 100 -f /var/log/cups/error_log
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
    D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
    D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
    I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
    D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
    D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
    D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
    D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
    D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
    D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
    The CUPS ownership of the USB device file seems OK:
    ls -l /dev/bus/usb/001/006
    crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
    I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
    EDIT
    I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
    Last edited by otx (2012-03-09 14:21:27)

    See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

  • Internet Explorer 9 no longer works after an uninstall of HP Support Centre

    Internet Explorer 9 no longer works after an uninstall of HP Support Centre and drivers for 3 HP All-in-One printers (psc1310, C4180, F4200).  Intend to re-install for just C4180.  I selected option to remove for all related software, though the HP Update and Photosmart Essentials have been left.  IE9 stops working when launched (even when launched with no add-ons and with Protected Mode disabled and Advanced Settings restored) and regardless of initial URL.  If I remove the IE9 update then IE8 works fine.   I tried re-installing IE9 update, twice, and it continues to fail.
    I’m running Vista 32 Home Premium SP2 on Samsung Q210 with Norton 360 v5, SpywareBlaster and Spybot - Search & Destroy.
    This question was solved.
    View Solution.

    I now believe the problem with IE9 was not related to HP, but to a Windows Update replacement to the “Intel Corporation - Display - Mobile Intel(R) 4 Series Express Chipset Family” drivers:  Intel Corporation Display software update released in February, 2011 (useless link  http://winqual.microsoft.com/support/?driverid=20411791).   IE9 started working OK when I set “Use software rendering instead of GPU rendering*” (see http://forums.whirlpool.net.au/archive/1678709 with reference to “faulting module igdumdx32.dll”), so will now investigate removing that update.
    Sorry to have cast aspersions on HP.  MS did this to themselves, as usual.

  • Mac Yosemite 10.10.2 -- System Pref. Java pane/ctrl-panel, Update-tab-function no-longer works, after updting to Java 8v40

    Under the Mac Yosemite 10.10.2 O.S. -- the System Preferences: Java pane/ctrl-panel: Update-tab-function no-longer works, after updting to Java 8v40 JRE & SDK -- says that the internet connection is not valid !

    A few questions....I assume your network is connected to the Internet? Do you use a proxy? If so, is it set in the browser or in the Java Control Panel?
    -Roger

  • Md5 reborned hasher 0.9.0 no longer works after firefox update to version 20 ,redesigned download box doesn't give option

    md5 reborned hasher which has worked previously no longer works after update to FF version 20 . the redesigned download box doesn't give the option to use the hasher.

    If you use this add-on a lot, you might want to switch back to the old style download manager until the add-on's author can bring it up to date. This thread describes how to make the switch: [https://support.mozilla.org/en-US/questions/955204 Got new version, want to go back to previous download box, the new one has no history and doesn't show speed of download, how do I go back?]

  • Internet sharing no longer works after Lion 10.7.4 update

    Internet sharing no longer works after Lion 10.7.4 update. Hopefully Apple will fix this shortly. Little excuse for this kind of screw-up.

    so here is da answer
    1. go to finder>(computer name)>macintosh HD>library>preferences
    2. copy the entire systemconfiguration folder and systemconfiguration.old folder to your desktop
    3. restart mac and device which you share intenet to
    then you have internet that is about 3x slower than the da 10.7.3 intenet sharing, but works
    then, just wait for apple to release da 10.7.4 fixed
    please use da steps!

  • Apps no longer work after installing ipad2 update 4.3.5

    Apps no longer work after installing IPad 2 update 4.3.5

    i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

  • Script no longer works after Upgrade to 10.4.6

    The following script worked fine using 10.4 thru 10.4.5 but no longer works after upgrading to 10.4.6.
    When I highlight a folder and then run the script the highlighted folder is moved to a specific "Achive" folder, depending on whether the highlighted folder has a ".0" or ".1" or etc in its name.
    When I run the script using 10.4.6 I get an error indicating that the highlighted folder already exists in the destination.
    Anyone else having Applescript problems with 10.4.6?
    --Bob
    tell application "Finder"
    activate
    set fname to selection as string
    if fname contains "0." then
    move selection to folder "ARCHIVE" of folder "0JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "1." then
    move selection to folder "ARCHIVE" of folder "1JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "2." then
    move selection to folder "ARCHIVE" of folder "2JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "3." then
    move selection to folder "ARCHIVE" of folder "3JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "4." then
    move selection to folder "ARCHIVE" of folder "4JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "5." then
    move selection to folder "ARCHIVE" of folder "5JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "6." then
    move selection to folder "ARCHIVE" of folder "6JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "7." then
    move selection to folder "ARCHIVE" of folder "7JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "8." then
    move selection to folder "ARCHIVE" of folder "8JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "9." then
    move selection to folder "ARCHIVE" of folder "9JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    end if
    end if
    end if
    end if
    end if
    end if
    end if
    end if
    end if
    end if
    end tell

    I, too, immediately started having problems with my scripts immediately after updating to OS 10.4.6. I put my scripts in "Library/Applications/..." so that the scripts associated with particular applications are available in the menu bar. I don't know if that has any bearing on the problem, but for me, it was not any particular script, but just about every one that started going funny.
    First, I noticed that my scripts would typically work right once, but fail in some odd manner the second time I tried to use one. The second thing I noticed was that the modification dates of my scripts were changing to the time that I last executed the scripts, even though I had not altered and recompiled any of them in weeks. Finally, I noticed that the scripts that were failing were ones in which I had used property statements to initialize some of my variables.
    What I think is happening is this: for some strange reason 10.4.6 is recompiling scripts every time they are run, and variables are being initialized, not to the values specified in property statements, but to whatever the variable was the last time the script ended.
    I discovered that I could prevent this from happening by (1) recompiling all my scripts to make sure all the property statements were back in effect, and then (2) setting the permissions of all my scripts to read only. This seems to prevent whatever in 10.4.6 is recompiling the scripts from doing this each time the script is run. At least, the modification dates are no longer changing inexplicably, and all my scripts are running reliably again.
    It's a bit of a pain to have to remember to reset script permissions to read/write whenever I want to make a change, and then change them back to read only before executing, but it seems to be a reliable workaround. I'd appreciate hearing if anyone else can replicate this phenomenon, or tell me if I'm on the right track.
    Jeff Johnson
    Dual 1.2 GHz   Mac OS X (10.4.6)  
    Dual 1.2 GHz    

Maybe you are looking for