Linksys e1200 PORT RANGE FORWARDING is not working

I currently have an E1200. I can port forward single ports, but when I attempt to forward a range of ports it doesn't work and there is no error in the log.
Specifically I am port forwarding RTP ports (10000 - 20000). I am aware of the security risks, please do not preach.

I have a problem with port forwarding http port 80 this for i surveillance camera.
I have all the settings are correct but I can not convert. Opening this port Also no other ports open. Who can help me on the way to this is to get together. I mtu gezte the firewall function in 1400 and put on the standard port 80 http to put. and of course the ip address that is in the same range.
I do not know what I'm doing wrong because the old linksys just worked. It I hope someone can help me.

Similar Messages

  • Unable to Save in Port Range Forwarding

    I'm using the BEFW11S4 wireless router and am unable to save the new port range forwarding settings I have entered.  Everytime I click Save Settings, I receive a box which reads:
    "The server 192.168.1.1 at Linksys BEFW11S4 V4 requires a username and password.
    Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection)."
    When I enter the same u/p that I used to access the router in the first place, it rejects and keeps bringing up the log in screen.
    I cannot get the port range forwarding to save at all due to this.
    Does anyone have any suggestions?
    Thank you!

    try remembering the password you used for first time while installing the router .... if not then use default password admin with out any username ....
    If still not working then you need to reset the router ....

  • Problem with Port Range Forwarding WRV54G

    I have configured my WRV54G to do the following, in this order, on the Port Range Forwarding page of the router:
    1. Forward port 3389 to LAN Static IP x.x.x.100, a desktop PC. I have confirmed this works, a port scan shows this port is open and I can remote desktop into x.x.x.100
    2. Forward port 443 to LAN Static IP x.x.x.101. I have confirmed this works, a port scan shows this port is open I can VPN to an SSL concentrator at x.x.x.101
    3. Forward port 3390 to LAN Static IP x.x.x.102, a desktop PC. THIS DOES NOT WORK. A port scan shows that this port is not open. I have configured the remote desktop host at x.x.x.102 to use port 3390. Netstat shows that x.x.x.3390 is listening on this port. I can remote desktop to x.x.x.102 from inside the LAN, no problem, so it's not an issue with the PX configuration.
    So, then I switched the order of the port forwarding instructions, in this order, as follows:
    1. Forward port 3389 to LAN Static IP x.x.x.100, a desktop PC. I have confirmed this works, a port scan shows this port is open and I can remote desktop into x.x.x.100
    2. Forward port 3390 to LAN Static IP x.x.x.102, a desktop PC. I have confirmed this
    works, a port scan shows this port is open and I can remote desktop into x.x.x.102
    3. Forward port 443 to LAN Static IP x.x.x.101. THIS DOES NOT WORK. Port scan shows this port is not open.
    It looks like the WRV54G is only recognizing the first two entries in the Port Range Forwarding table and IGNORING the third entry. HELP??!!
    I have the latest firmware installed: v2.39.2e
    Anyone have a solution? Thanks in advance!
    Message Edited by crescendi on 07-19-2008 11:53 AM

    Are you still using the DHCP server range of  x.x.x.100  through  x.x.x.149 ?   If so, then your problem may be that you are using illegal fixed LAN IP addresses.
    With Linksys routers, any fixed LAN IP address must be outside the DHCP server range, and it cannot end in 0, 1, or 255.
    I would suggest that you fix the illegal addresses, then see if that resolves your problem.
    Here is the full set of rules for using fixed LAN IP addresses:
    With Linksys routers, a fixed (static) LAN IP addresses must be assigned in the device that is using the address. So you need to enter the fixed address in the computer or printer, not in the router.
    When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255.
    Therefore any fixed LAN IP address would normally need to be in the range of
    192.168.1.2 thru 192.168.1.99 or
    192.168.1.150 thru 192.168.1.254
    assuming you are still using the default DHCP server range.
    Also, in the computer, when you set up a static LAN IP address, you would need to set the "Subnet mask" to 255.255.255.0 and the "Default Gateway" to 192.168.1.1 and "DNS server" to 192.168.1.1
    It is also important that no two devices on your network be set to the same static LAN IP address.

  • What's safer: Port range forwarding or Upap?

    Hello there,
    I recently replaced my router and since then have been unable to get video and audio chats to work. I get the "XXXXX did not respond" message. Text chat is fine. By what I have read in this forum, my problem has to do with port settings on my new router, a Linksys wrt54gx2.
    My question is this; is it safer/more secure to use port range forwarding or the universal plug and play option? Do I need both?
    The Mac OS X firewall settings are currently off.
    Thanks in advance for any advice.
    John

    HI John,
    This is not a suitable device for iChat for some reason.
    This page is for the WRT54GX (not the GX2)
    This shows the Port Forwarding for this device (and the default IP and User ID and Password).
    You should not use Port Forwarding and UPnP together.
    The UPnP setting in in the Admistration tab.
    Port Forwarding uses NAT (Network Adress Translation) and this can cause problems between some devices.
    UPnP does Broadcast that is available but is normally limited to a few Hops.
    In most device this can be limited to just one hop if you require.
    1:27 PM Monday; May 29, 2006

  • Port Range Forwarding on E1000

    Ports selected to forward in the the 'Port Range Forwarding' page do not forward.    They do however forward properly from the 'Single Port Forwarding' page.
    Help?
    TIA

    to re-iterate again ..
    recent changes made to 'Single Port Forwarding' work .. but changes (as well as existing) on 'Port Range Forwarding' just dont forward.
    to re-iterate again ..
    stuff (whether existing or newly added) works for 'Single Port Forwarding' .. but stuff (whether existing or newly added) does NOT work for 'Port Range Forwarding'.
    This any more clear?
    Thx

  • DMZ v. Port Range Forwarding????

    Ok,  DMZ opens all ports. But I was wondering if port range forwarding might be better. Once again I am still trying to eliminate lag with my 360. I enabled the port forwarding for the ports specified by the 360. I also blew all ports wide open with DMZ. Is it better to just port forward without DMZ? I don't care about the security issues. I just want speed. I already disabled all firewall features of the router. My PC is locked up tight and I'm not worried about it. The ports I forwarded are 88 TCP and 3074 Both. Is there something I'm missing here? I'm running a 5 meg connection. It's faster than my old DSL connection. I even found a website that told me to change my IP manually on 360 which I have done and it worked to open my NAT. Any gamers please help. Again I'm not trying to do anything to my PC. That connection is fine. Just need to tweak more upload with less lag to 360.

    ok.......How do I use them? Triggered Range start port? to end port? Forwarded Range start point? to end point? Would it be the same forwarded ports? do I put the same port # in all for areas? I'm working with WRT54GS ver. 6

  • WRT160n Port Range forwarding problem

    I have a WRT160n that I am trying to forward some ports on for some DVR equipment. When I use the single port forwarding and enter each port separately it works fine. But I have 2 DVR's and they use a bunch of ports each so I want to use the port range forwarding because there are not enough spots in the single port forwarding section. The ports I am trying to forward are 8000-8004 for one IP address and 8005-8009 for a second IP address. I have entered it into the port range forwarding section but I can not connect from outside my network. As I said if I enter them in the single port section seperately as 8000,8001,8002,8003,8004 then I can connect fine outside my network. Any idea's what the problem is?

    chuckb223 wrote:
    jaymay wrote:
    How about you isolate it first by forwarding the ports for one DVR. Forward them one by one on the Port Forwarding Range page then see if it works on one DVR. If it will, try to do the same thing for the other DVR.
    Yes I already tried this with no luck. I tried just opening one port in the port forwarding for 1 DVR and it did not work, Opening this same port in the single port forwarding did work.
    Is your router a version 1,2, or 3? Your router probably needs to be updated (firmware).
    Firmware
    11/08/2010
    Ver.1.02.11
    Download
    3.15 MB
    Firmware
    11/15/2010
    Ver.2.0.03 Build 9
    Download
    3.25 MB
    Firmware
    07/12/2010
    Ver.3.0.03 Build 3
    Download
    3.31 MB
    And then reset and reconfigure your router again for internet connection and try the port range forward again and see if you can both DVRs working properly.

  • Port/Port Range Forward limit on Airport Extreme (N)

    Hi there,
    Can anyone please tell me if there is a limit to how many ports I can forward to separate machines in my LAN in the new Airport Exreme N?
    Currently routers like the Linksys WRT300N only provide 10 items for port forwarding and port range forwarding, respectively. Flashing a Linksys router with DD-WRT gives you an unlimited amount.
    Thanks very much!
      Mac OS X (10.4.8)  

    There is no noticeable limit. Everything I see in the manual hints that you should be able to shove as many as will fit into memory... which is a lot.
    The main reason for the limitation is that companies like Linksys, for whatever reason, do not like to mess with the complicated HTML required to support 'unlimited' port forwarding in their tool. They get around the complexity by putting enough fields on the page so that they hope their customers don't run out.
    In Apple's case, the configuration tool is a native application, rather than a web page, so it is simple to support 'unlimited' port forwarding.

  • DPC3825 Port Range Forwarding page disappeared

    I've been using the DPC3825 gateway to forward port to my server. It's not long ago that I realised the page for port forwarding had disappeared. I'm confused and now I can't configure the port forwarding any more. Please can anyone tell me what caused this and how to get it back? Many thanks in advance. 

    to re-iterate again ..
    recent changes made to 'Single Port Forwarding' work .. but changes (as well as existing) on 'Port Range Forwarding' just dont forward.
    to re-iterate again ..
    stuff (whether existing or newly added) works for 'Single Port Forwarding' .. but stuff (whether existing or newly added) does NOT work for 'Port Range Forwarding'.
    This any more clear?
    Thx

  • Router won't save settings of Single Port Forward or Port Range Forwarding

    Hi everyone, I'm having a bit of trouble tonight trying to get my Playstation 3 to play games online and in doing so I'm attempting to enable Single Port Forwarding and or Port Range Forwarding.
    To start, I am using this link below this paragraph as a guide.
    http://portforward.com/english/routers/port_forwarding/Cisco/Linksys-E1000/PS3_Endless_Saga.htm
    Each time I go and set the settings and click save, it tells me the settings have been saved successfully then when I click continue onto the next page it shows they actually haven't saved at all. My router is out of it's 90 day phone support with Linksys and I refuse to pay anything extra for support so I'm hoping someone else will be able to help me with my issue since they refuse to unless I pay them.

    Hello. Sucks you ran into trouble just after PSN got back online
    Try clearing your cache / cookies then re-do the settings. Also, try using a different Internet browser.

  • The router forgets Port Range Forward settings

    Hello, after a year or so of working absolutely flawlessly, the router, all of a sudden, started forgetting the Port Range Forward settings.  In particular, I have port 80 set to go to a specific IP address.  Every now and then, it will start going to a different address within the network (even though the Port Range Forward page still shows it pointing to the right IP address).  
    I disable Port Forwarding for that port, then re-enable it and everything is fine.  For about day or two and then the problem re-appears.
    What could be the issue?
    Thanks.

    What is the model no of the Router...?
    Who is your ISP...?
    What firmware you are using on the router...?
    Try to reset the router and re-configure it from scratch.Now,check if that make any difference.

  • WRT54GC resetting Port Range Forwarding

    I have a WRT54GC, with firmware v1.05.7.  And I have recently modified the Port Range Forwarding.  It will work OK for a day or two, then for no reason it stops working.  When I check the configuration, I see it has reverted to the old Port Range Forwarding config.  So I change it again, save it, and again it will work for a day or two before reverting to the old config.  How can this be happening?

    Hey try resetting the router reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!

  • I'm unable to utilize the Port Range Forward feature

    on my WRT54G.  When I enter the data and click Save Settings, I'm returned to the Port Range Forward page and none of the data has been retained.  Please help.

    Nevermind, I configured the wirelessly connected computer to a static IP and it's working now.

  • My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

    My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

    I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
    http://www.apple.com/retail/geniusbar/

  • All Ports/Plug​ins Do not work. Compaq Presario SR5233WM Desktop PC

    Hello,I am here today With a problem of Mine that I can't seem to fix on my own.I have the Compaq Presario SR5233WM Desktop PC And I have Not used it In about 10-12 months And I have finnaly turned it on to Try and use it for some stuff and I plugged it in the wall And It starts up normally no beeping sounds or nothing.So After I did that I plugged the Blue video cord into my PC and my monitor And Before this I rememberd My USB ports wouldnt work And I could not test them out again because my video did not seem to work,I had asked around and They said something about my Drivers Need Resseting? I kept on Getting different answers when I ask so I came here. So to sum everything Up. How do I reset my drivers Without Video And/or What is the problem and how to fix it with the ports not working..Thanks for your time.

    Hello again ZhayneW,
    Thank you for the updated information on your issue. I would like you to try the steps I am providing you below in order until your graphics return:
    Step 1. As you have tried different monitors I would like you to try different cables. The cables that go from your monitor to your computer could be the issue as well. According to the Compaq Presario SR5233WM Desktop PC Product Specifications page your computer has the IPILP-LC (Lancaster8) IPILP-LC (Lancaster8) and has following I/O ports with number 2 being a VGA connection and number 7 being the USB ports you state do not work. If you are using a VGA cord to connect your monitor to the computer that is the cord I would like to see replaced or swapped out with if possible. If you have already done this move on to the next step and ensure you let me know in your next post.
    Step 2. Turn off the computer and unplug the power cord and open it up and place your had on the power supply for about 30 seconds to drain any electrical charge you may be holding. Now on the motherboard on the front (opposite the I/O connection indicated above) left hand side you will see the following jumpers:
    These are the jumpers you need to use to clear the CMOS on your computer. Now on the off chance that your USB and Intergrated graphics have been disabled in the BIOS I am going to get you to clear the CMOS settings by moving the jumpers to look like the image below:
    Leave the jumpers in this position for about 10 seconds and then return them to their original position. Reassemble the computer and do not plug it in until it is totally back together. If this was successful your computer should boot up and your display should be back.
    Step 3. At this point the issue appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options. You could also go to a local computer repair and look to get it repaired as well.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Maybe you are looking for