Linksys E2500 does not show any devices in DHCP client table
Equipment:
Old Westell DSL modem, still runs like a champ
Linksys E2500
home built desktop running Linux 12.10
We're having intermittent WiFi. This morning I finally sat down to do some troubleshooting. SOP for me is to reset both the modem and the router. Modem bounce went fine.
Before bouncing the router I did some nosing around and noticed there were no devices listed when I nosed throught the DHCP client table, not even the wired connection for my desktop. There should be 2 MacBooks, an Apple TV device and a Galaxy S4 showing up.
The other oddity - on a lark I switched the MacBooks over to the guest connection and there have been no problems with wifi since.
What gives...?
Any and all help will be greatly appreciated!
You make sure that the router's firmware is up to date. Reset it again since that's recommended after the upgrade and reconfigure the settings again. All devices in your network connected/ utilizing the router's DHCP server should be listed under the Clients Table.
For the intermittent wireless issue, try changing the wireless settings; ssid, wireless channel, and the security. For the channel, play around with channels 1, 6, 9, and 11.
Similar Messages
-
ITunes does not show any devices
My iTunes does not show any devices, even the new iPhone connected directly to the PC.
Hey rtm56,
Thanks for the question. I understand that your iOS devices are not being recognized by iTunes for Windows. The following article may help to resolve your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/TS1538
Thanks,
Matt M. -
Q: Why does Group created on Master console does not show any device count mapped on the managed Amp?
A: When a group is created on master console it will be pushed to all the managed amp which is added with Manage group configuration enabled. The Group pushed to the managed amp will be created as Global group and you can create subscriber groups for the global group to which you will add the device into since we cannot add any devices into global group directly.
Hence there is no device added to the global group, on the master console it does not show any device count for the groups that are created on master console.Laura Quitugua wrote:
Hi,
I have syced my outlook email with my iphone 4s and ipad.
Note that only the email account info (username, login, server) is sync'd.
The actual emails are not sync'd.
Opening an email on one device does nothing on teh other devices. -
I have just gotten my new ipad!!! I downloaded latest version of itunes but my ipad does not show in devices when I try to sync music. Any suggestions??
Does a little box come up seeing the iPad as a camera? That doesn't impact iTunes as much as it confirms that your computer sees the device. If your computer doesn't see it then iTunes doesn't know it's there.
If you're plugged into a hub or extender, try plugging it directly into the box or main part of your computer.
If you're using an extension, stop and just use the included sync cable.
Try using a different USB port.
After you installed iTunes, did you restart your computer?
Usually what's needed is the 'apple device driver' which installs automatically, you just need to sometimes trigger the install, using different ports helps with that.
If the simple trouble shooting doesn't help then you can search on the Apple Device Driver and there's more detailed trouble shooting on the site. -
my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description: Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address: 192.168.1.5
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Dec 31 13:46:09 2011
Lease Expires: Tue Jan 03 13:46:09 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number: 86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me). -
CD does not show under Devices on iTunes
I am a new user and would appreciate any suggestions. My iPod shows under Devices on iTunes, and I've had no problem buying music from iTunes store or loading to iPod.
I have set iTunes to be the default player of music cds but they do not play when loaded (iTunes opens) and the CD does not show under Devices.
Thanks in advance for any help.
HP dv6110ca Windows XPI did run the diagnosics before, and have just run again. As you will see it passes with flying colors - but still is not recognized as a device on itunes......
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Hewlett-Packard HP Pavilion dv6000 (RN907UA#ABL)
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: NVIDIA GeForce Go 6150\GeForce Go 6150
IDE\DiskST98823AS______________________________7.24___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomPHILIPSDVD-RAM_SDVD8821________________EH19___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
E: PHILIPS DVD-RAM SDVD8821, Rev EH19
Audio CD in drive.
Found 14 songs on CD, playing time 72:11 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:13:25
Track 3, start time 09:58:02
Track 4, start time 14:37:60
Track 5, start time 20:31:35
Track 6, start time 25:38:35
Track 7, start time 31:37:27
Track 8, start time 35:21:52
Track 9, start time 41:56:50
Track 10, start time 47:36:50
Track 11, start time 52:54:27
Track 12, start time 58:11:12
Track 13, start time 63:52:55
Track 14, start time 68:20:05
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 10 16 20 24.
The drive CDRW speeds are: 10.
The drive DVDR speeds are: 10.
The drive DVDRW speeds are: 10. -
my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?
There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.
-
How do i update 10.5.8 if my macbook does not show any software updates?
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?
See
http://support.apple.com/kb/TS4215 -
IOS 7 Calendar Day View does not show any all-day events ?
Hi,
I realize that iOS 7 Calendar Day View does not show any all-day events.
Is this a bug ?
Any help given is much appreciated.
Thanks and Regards.Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.
-
Search Item drop-down does not show any data for Advanced Search.
Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, SureshHi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu -
I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.
Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara -
I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?
You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.
-
Help! When i connect my "iomega" External hard drive to my mac it does not show in devices or on the desktop, how can i access my hard drive?
what format your iomega HD is it NTFS , if NTFS try download http://www.apple.com/downloads/macosx/system_disk_utilities/ntfs3g.html
-
I have a Power Mac G4, it has OS 9. Imam trying to upgrade to OS 10.2.3 (Jaguar). It is going smoothly until I get to the "Select Destination" screen. It stalls there and does not show any disks to choose from.
Any ideas?
Thanks. Abe OliverHello Abe,
If it's a Digital Audio or earlier, you need to install a Firmware update first...
As explained in "Mac OS X 10.2 Welcome and Install Manuals" and "Mac OS X Welcome and Install Manuals", you may need to update the firmware on your Macintosh computer prior to installing Mac OS X 10.2 or later. The following table lists the firmware updates that are available for Apple products that can update to Mac OS X 10.2 or later.
http://support.apple.com/kb/HT1395?viewlocale=en_US
Power Mac G4
Firmware Update
Download Document No.
Power Mac G4 (Mirrored Drive Doors 2003)
no update needed
Power Mac G4 (FW 800)
no update needed
Power Mac G4 (Mirrored Drive Doors)
no update needed
Power Mac G4 (QuickSilver 2002)
no update needed
Power Mac G4 (QuickSilver)
no update needed
Power Mac G4 (Digital Audio)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (Gigabit Ethernet)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (AGP Graphics)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (PCI Graphics)
no update needed
Power Mac G4 Cube
Power Mac G4 Cube Firmware Update 4.1.9
75129
Maybe you are looking for
-
Placing a PDF file in an InDesign Doc and PDF again for a vendor- Good or Bad?
Current debate in the graphics department is Is it good or bad to place a PDF (general Press Quality) into an InDesign document and then creating a new PDF file with print vendor settings from that document? My thought is that you in some cases are d
-
Creating GUI component that includes other components
Hello, I need to create an UNIVERSAL FORM (panel) consisting of several textboxes and labels. These textboxes and labels will be defined in XML. I want it as a GUI JavaBean. It should be made from a panel with some layout and it should consist other
-
Hi I have an issue with Lookup values of leave reason in terminate employment form. It is displaying only 3 leave reasons(Deceased, Gross Misconduct, Retirement). I have switched to Application developer and checked for the "LEAV_REAS" lookup values.
-
Mouse pointer does not function in System Preferences
I have recently switched my mouse from right to left use (due to injury in the right arm). After changing the mouse does everything as expected but only in the System Preference application I cannot use the pointer of the mouse to select (the menu sy
-
How do I setup HTTP Server ?
Hello I am new to Linux.. I have installed Oracle Enterprise Linux 4.x on my Dell Vostro 200 Series. A) How can I enable HTTP server on my system, so that some of the directories can be accessed from any where ? B) Similarly FTP protocol ? How do I d