Linksys EA3500 and QSee CCTV DVR, can't open any ports

Hi everybody,
I just set up everything, and I am able to view the cameras from inside the network, but when trying to view them from outside it appears offline.
I have tried to follow all the guides to open ports, tried 80,81,85, 6039 etc but canyouseeme always tels me that the ports timed out. I enabled DMZ for the specific MAC address of the dvr also.
I'm going crazy!
Is there anything I am doing wrong?

Are you using the Linksys smart wifi feature or just the classic page? If you are using the Linksys smart wifi page then you can use this article: How to set up port forwarding on the Linksys Smart Wi-Fi Router using the local access interface
If you are using the classic Linksys page then you can use this article:
Setting up single Port Forwarding on Linksys Wi-Fi Routers and Smart Wi-Fi Routers
Make sure to disable the filter anonymous internet request under security tab of the router.
Make sure to get public ip or wan ip on the router’s status page.
The ports 81, 85, 6039 and other camera related port numbers should be open behind your modem. If they are blocked by your ISP then you have to ask them to open these ports. You can use this port checker ping.eu to verify if the port is really open. Once all ports are open for your camera, then you should be able to access it remotely.

Similar Messages

RV042 can't open any port!

Hello,
I have a RV042 Dual Wan. Two internets balanced wow! who would've thought that the headaches were waiting patiently right down the corner.
I was working with a 2wire Gateway that came with my ISP. I was able to open the ports in order to have public access for my students and teachers to upload their work. All I had to do was to allow my server ip address to have access to different ports blocked by the ISP. I used
http://www.canyouseeme.org/ in order to verify if my port was open.
I bought the RV042 for various reasons like excellent content blocking, load balancing, quick vpn, among other. But I just can't open the port 80 while having having my two ISP connected with load balancing, not even while having only one modem connected.
I have resolved many issues using the protocol binding. I have tried everthing. I just don't undertand something.
Whenever I connect my server to my old router, "www.canyouseeme.org" tells me that my port 80 is open.
Whenever I connect my servet to the RV042-DW, my port appears closed.
So it's not any OS issues.
I've tried:
- To forward the TCP 80~80 port to my server static ip address... but failed
- To enable UPnP function with the same port... but failed
- To configure the port triggering with the same port.. but failed.
- To disable the firewall.. but failed.
- To use transparent bridge in the WAN1 with my 2wire Gateway... but failed
- To set up an account in DNS.ORG already had one, everythings is in green.. but failed.
- To change the configuration in my old 2Wire Gateway router to allow a DMZ zone so all ports are public... but failed.
- To assign RV042 router ip address in my old 2Wire allowing that specific address to allow certain ports to be public... but failed.
I have the Firmware v4.0.4.02 from DEC/11
HELP!
http://www.youtube.com/watch?v=TU7JjJJZi1Q

Which leads us to the second preoccupation. If I can't make port 80, or port 21 to be public then could i set a QuickVPN successfully?
Is it possible to bridge a RV042 Dual Wan to a RV042 V3 Dual Wan to bring 3 ISP's downstream loading balance into 4 outputs.?
First Router
1st ISP = 2Wire Gateway 1Mbps Down , 0.5Mpbs Up
2nd ISP = Same as 1st
Second Router
3rd ISP = Dedicated Internet access 2Mbps UP and DN
Would that produce a 3Mpbs Down, 2.5Mpbs up?

Please help. The Finder has crashed I guess, no icons on the desktop, menu bar and dock flicking. Can't open any app, folder or even do a right click.

Good day, I could really need some information. Thank you in advance.
I have a 2008 24" iMac, running on 10.5.8.
I want to describe the whole issue. The only thing that changed in my routine and made it crash was that I bought a new Apple keyboard, with a wire this time, before I was using a bluetooth one, and a new wireless Logitech mouse. After I successfuly connected both, while browsing in Safari, the computer totally lagged. All I could do was to manually restart it. When I started it again, it said that the "ruby" application has quited unnexpectedly. After clicking ignore, I observed that the icons on desktop haven't loaded, the menu bar is constantly reopening itself, I can't right click, if I try to open Sistem Preferences that is as far as it will allow me to go, if I click anything else than, it closes system Pref. and leaves me again with this flicking menu bar, which of course I can't even click and an empty desktop. I couldn't see if the problem is only related to my user, as there is only 1 user on it. I tried to create a new one, but I get the problem mentioned above.
I try to see here on the forum if other people have had the same problem, but what I got was minor cases, they can still use finder or an app, everytime I open something, it dies and I only can restart the poor thing
I hope I don't have to delete all my info on my drive, that would be a big problem for me.
Solutions, recommendations?
Thank you.

Hi Paul,
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

How do I get rid of the Microsoft Setup Assistant loop? I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word, and stuck in a loop?

I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word (for 2008), and stuck in a loop?
Whenever I select Word Microsoft Setup Assistant appears, asks for feedback, then after selecting okay (both on saying yes or no to feedback) goes on to a registration page. When I click on this it says I've already registered so I just click okay, and then move on to a update page. After this, if I click on Word, the process repeats itself.
As I said, I don't have the disk to reinstall, and can't find the Office Settings to delete as many pages have suggested I should try. Safe Boot restarting also hasn't worked... Really stuck and need Word very soon for work.
If you can help, that would be great, and feel free to ask any questions about the situation as I'm not an expert here.
Cheers,
Jack

First, export your contact from iCloud.com and save them on your computer in a safe spot some where (like you desktop). Use this to help you do this: http://support.apple.com/kb/PH3606
Next, on both of your devices, go to Settings > iCloud and turn on contacts and select Merge. Then turn off contacts and select 'Delete form my [device]' when prompted.
Now go back to iCloud.com and select a contact (yes they will all be messed up again) and select Command+A on a Mac or Control+A on a PC to select all of the contacts. Tap the delete key on your keyboard (or right click /control click a contact and select delete).
You iPhone, iPad and iCloud.com should not be empty for contacts.
Go back to Settings > iCloud on both devices and turn on contacts again (you should not see merge this time).
Next, go back to iCloud.com and import your contacts (those exported .vcards). You can either drag and drop them into the empty contacts list in your web browser, or you can use the gear icon to import.
You cleaned up contacts should import correctly into iCloud.com and sync to both of your devices.
Good luck.

Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
and will check online for solution. Please assist as no files will open now
This is details of error
Problem Event Name:    APPCRASH
Application Name:    AcroRd32.exe
Application Version:    11.0.10.32
Application Timestamp:    547e9779
Fault Module Name:    StackHash_147f
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Code:    c000041d
Exception Offset:    77a011f1
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Information 1:    147f
Additional Information 2:    147ff66574b08dc93180d912e60eb897
Additional Information 3:    c48b
Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Can you open Adobe Reader by itself? If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

How can i get acsess to my data if my iphone is shut and can´t open any more??how can i get acsess to the memory card, how can i get acsess to my data if my iphone is shut and can´t open any more??how can i get acsess to the memory card

how can i get acsess to my data if my iphone is shut and can´t open any more??how can i get acsess to the memory card????please help

You can't. There is no memory card. It uses flash memory that's soldered to the logic board. If you didn't back it up, your data is gone.

Have used cloud with CS5.5. Not longer have cloud can not open any of my creative CS5.5 folders. Why? and how do I fix it?

As a student enrolled and used the Cloud. already had CS5.5 Creative suite installed on computer. Now that I'm no longer a student and No Longer have Cloud I can not open any of my folders with work in them. It wants me to up dated my subscription. I cant afford it right now.
I want to use the programs I have already paid for. . Creative Suite CS 5.5.
Why can't I open those folders/work and how do I fix it.

if you don't have cs5.5 installed, you can download and install it.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Problem with Pages. I have recently been unable to open Pages, or any documents from Pages on my iMac. Pages seems to be in the Cloud and can open a list of the documents in Pages, but can't open any of those documents.

Recently unable to open Pages or any documents therein. It seems to be stuck in the Cloud. Although I can open a list of the documents I can not open any of the documents.

The answer is simple... If you want to remedy this, then don't save them as PDFs.
Word opens Word and text documents. Not PDFs.
Also note that this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office or your question in any way. If you have issues or questions about Office, it's probably best you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days?

I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days? I tried asking in a chat window instead of the forum but no one answered and after about ten minutes my screen restarted and closed the chat window down. It seems a little frustrating not knowing what happened to my order and not being able to contact anyone. Is all this usual with Adobe or are they just having technical problems this week?

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Java 7 installed today and now I can't open any web page in FF!!

I downloaded JAVA 7 today and now my mozilla will barely open any pages especially youtube and google! I have uninstalled Java rebooted the PC and still the problem persists! I don't like to use Chrome or any other browser for obvious reasons. Please can you help me?

are you getting any error?
Start Firefox in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Safe Mode to Troubleshoot the issue] and to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix

I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix.
Why after 6 year's this has changed?
I would like to open PDF's straight from Window Mail.

Good day Jeff.
I am running most current Adobe Reader X.
Tks Mark

My Creative Cloud subscription has expired, and I assigned the monthly payment, but I can not open any progam creative cloud, I need help how to solve this problem

my Creative Cloud subscription has expired, and I assigned the monthly payment, but I can not open any progam creative cloud, I need help how to solve this problem

Carlos-
Start by signing out and back in to see if it will see the subscription:
How to sign in and sign out of creative cloud (activate/deactivate)
If the apps are installed fine and close after launch see this link:
CC applications close immediately after launch
If the problem is something different, please let us know the error you see or what is happening on the screen so we can advise you on a solution
Pattie

I have just downloaded Mac OS X 10.9 and Pages 5. When I open any pre-existing document in the new Pages the format is zoomed to 125%, the headers are out of position, the margins are changes, and inserted images are also relocated. What can I do?

I have just downloaded Mac OS X 10.9 and Pages 5. When I open any pre-existing document in the new Pages the format is zoomed to 125%, the headers are out of position, the margins are changes, and inserted images are also relocated. What can I do?

Have you tried resetting the SMC ? > Resetting the System Management Controller (SMC)

Just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

The D610 didn't get out-of-the-box RAW support until Photoshop CC.
You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5.

DynamicLink Media Server is not available. I can't open any video file in Photoshop CC and when it does, Photoshop freezers and I can't do anything else. I'm using OS X 10.9.4-3.1 GHz Intel-16 GB DDR3. Any help please?

DynamicLink Media Server is not available. I can't open any video file in Photoshop CC and when it does, Photoshop freezers and I can't do anything else. I'm using OS X 10.9.4-3.1 GHz Intel-16 GB DDR3. Any help please?

Indicas que no puedes abrir ningun archivo de video, se supone que has probado varios formatos, mp4, mov,..
Has actualizado el OSX a 10.9 ?, funcionaba antes? La versión de Photoshop es la CC, no la CC 2014?
En el menú de Ayuda>Actualizaciones, cual es el resultado, dice que esta al día?
Tienes abiertas otras aplicaciones?
Prueba a cerrar todo, espera media minuto y abre Photoshop a ver que ocurre.
(Estas utilizando un MacBook Pro?)

Linksys EA3500 and QSee CCTV DVR, can't open any ports

Similar Messages

Maybe you are looking for