Linksys EA6900 configuration for BT

Hi All
I have been having a few issues with my BT homehub, disconnecting, dropping connection, etc. so I decided to try a different router to see if it was actually the BT homehub causing the problem. However I cannot find anywhere where there are a list of settings to use - does anyone know what they are?
Basically, I have tried:
Connection Type: PPPoE (only other options I have are PPTP, L2TP, Bridge Mode and Static)
Username: [email protected]
Password: BT
Service Name (Optional): BT
Oh and I had seen on post that mentions changing the MTU to 1492.
Can anyone help?
Thanks in advance.
KopGoofer
Solved!
Go to Solution.

KopGoofer wrote:
Hi All
I have been having a few issues with my BT homehub, disconnecting, dropping connection, etc. so I decided to try a different router to see if it was actually the BT homehub causing the problem. However I cannot find anywhere where there are a list of settings to use - does anyone know what they are?
Basically, I have tried:
Connection Type: PPPoE (only other options I have are PPTP, L2TP, Bridge Mode and Static)
Username: [email protected]
Password: BT
Service Name (Optional): BT
Oh and I had seen on post that mentions changing the MTU to 1492.
Can anyone help?
Thanks in advance.
KopGoofer
Try leaving the password field blank.

Similar Messages

  • Adding Airport Express to working G5 Linksys WRG setup for music...issues

    Problem: G5 is "connecting" to wireless linksys network but no longer getting IP address (nor connecting to network to configure AX and itunes doesn't see remote speakers) Using DHCP, can see Mac addresses on Linksys web configure screens.
    It worked fine prior to adding AX. I had the G5 connecting to Linksys Network WRG wireless router accesspoint through to DSL modem. This has worked fine for months. Also connect to this network with WinPC. All using WPA Personal security password.
    CD Player died, so I purchased the Airport Express to play music to my stereo.
    I did get the Airport Express configured...although many tries. I had to turn on broadcast of network name or SID in the Linksys webconfig. Music did play from G5 but I somehow lost the ability to connect to internet. Firefox gave "cannot connect" message. (Safari Network Diagnostics cannot fix issue) When I stopped and restarted the Airport(on G5) the music quit playing. Still have green light on Express. WinPC still works fine as well, HOWEVER:
    G5 says that either(depending on which Im trying) that Airport is connected to "wireless network name" but doesn't have ip address OR that ethernet is connected but doesn't have ip address. I see on linksys that the mac addresses are "on". I've restarted everything, I've trashed the sys config folder and restarted G5...still same issue. Again WinPc works fine. Using DHCP...
    Any ideas on how to get my G5 back on network? and then I can try to have the AX work again.
    No tunes, and now no internet...help?
    This is posted on IMAC G5 forum but it was suggested I post here for Express expertise. THANKS.

    I would suggest getting your Internet connection back first, and then, adding the AX for streaming iTunes.
    Try the following...
    Modem/Router Power ReCycling
    - Power-off the DSL/Cable modem, Internet Router, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    - Power-on the DSL/Cable modem; Wait at least 30 minutes.
    - Power-on the Internet Router; Wait at least 5 minutes.
    - Power-on the computer(s)
    Typical Linksys Router Setup - Cable
    - Access the Linksys web-based setup at 192.168.1.1 (or whatever address your router is set at) using a web browser. The default username is blank & password is "admin."
    Setup tab
    - LAN IP Address: 192.168.1.1
    - Subnet Mask: 255.255.255.0
    - WAN Connection Type: Obtain an IP automatically
    - Apply (if you make changes)
    Status tab
    - WAN (all the values here should be populated by your ISP)
    DHCP tab
    - DHCP Server: Enable
    - Starting IP Address: 192.168.1.n, where n should be greater than 1
    - Number of DHCP Users: n, where n should reflect the realistic number of concurrent clients that you plan on having connected to the router at any given time.
    - Client Lease Time: 0
    - DNS 1, 2, 3: <leave at default>
    - WINS: <leave at default>
    - Apply (if you make changes)
    Advanced - Filters tab
    - Filtered Private IP Range: <leave at default>
    - Filtered Private Port Range: <leave at default>
    - Block WAN Request: Enable
    - Multicast Pass Through: Enable
    - IPSec Pass Through: Enable
    - PPTP Pass Through: Enable
    - Remote Management: Disable
    - Remote Upgrade: Disable
    - MTU: Disable
    - Filter Internet NAT Redirection: Enable
    - Filter IDENT(port 113): Enable
    - Apply (if you make changes)
    - Leave all the other tabs at their respective default settings.
    Connect your G5 directly, using an Ethernet cable, to one of the LAN ports of the Linksys router. Can you access the Internet now?

  • Linksys EA6900 (AC1900) "Media Prioritization" Set-up Question

    Got the new Linksys EA6900 router (coming from Asus routers) and I'm trying to set the the 'media prioritization' for my iPad and my iPhone. I want those 2 devices to have top priority for streaming and facetime, etc.
     I'm not really sure how this works but when I drag up both of those devices to the "High Priority" section, in the SETTINGS section the "downstream bandwidth" shows a number of '24469 Kbps.'
    Is this suggested number value okay or can I bump it (or lower it) to get BETTER performance for the iPad and the iPhone? 

    The answer is it all depends on what you are trying to accomplish, as I learned the hard way. For some reason, my Downstream Bandwidth defaulted to 3092 Kbps on my router, even though my actual downsteam is about 12.5Mbps. After I enabled Media Prioritization and placed my two SIP phone devices in the the high priority category, I noticed that everything else on my network was moving at a snails pace. I ran a speed test on Ookla and found that my internet speed was being throttled at 3Mbps for EVERYTHING on my network!!! After bumping this value to 15000 Kbps, I retested and I was able to get my full download speed on my pc again.
    So, what does this mean? This Downstream Bandwidth setting determines the MAXIMUM download speed that is available to all devices behind the router, even the ones in your high priority class! Therefore, YOU MUST SET THIS VALUE TO SOMETHING HIGHER THAN YOUR ACUAL DOWNSTREAM BANDWIDTH, if you DON'T want to limit your internet connection speed. Otherwise, you will be choking your internet conneciton unnecesarily!
    Prior to figuring this out, I was paying for 12Mbps, but unknowingly choking my internet connection to 3Mbps by this hidden setting. I hope this helps save someone else from the same pain that I went through.
    P.S. This value is the absolute maximum downstream speed that your router will allow. Therefore, you should set this to something WELL ABOVE what you actually expect to get. For example, as a test I set mine to 6000 Kbps, but in testing was only able to get an average of 4.6 Mbps. This is because your downloads are never at a constant bit rate. If you set this at your advertised line rate, you will be clipping the peak speed of your internet connection, and thus choking your overall throughput.
    P.P.S. I should mention that I am testing with an EA6300, not the EA6900, just in case there are any differences in the firmware.

  • Linksys EA6900 and BT Infinity

    Hi
    I am about to purchase the Linksys EA6900
    Does it connect the same way as the BTHub4 does i.e. to the openreach box?
    Thanks.

    HarvRBR wrote:
    Hi
    I am about to purchase the Linksys EA6900
    Does it connect the same way as the BTHub4 does i.e. to the openreach box?
    Thanks.
    Yes, you will need to set it up.
    Infinity uses PPPoE. (Point To Point Protocol Over Ethernet)
    If you use a different router with Infinity, then you need to make sure that the authentication is set to PPPoE.
    You can use a user name of [email protected] and a password of bt
    MTU Size: no 1492
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • SAP DMS - How to do an external DMS configuration for the existing system ?

    Hi All.
    Greetings.
    Request help and understanding.
    Am new to the world of SAP. And request SOME clarity for understanding of DMS.
    We are wanting to put an external DMS server and wish to configure for the same.
    So that the load on the production SAP R/3 database is reduced.
    We are now wanting to test the same on Dev environment.
    From SDN Link :
    I understand that :
    DMS basically has a content server. which stores documents.
    That can be accessed through Web, SAP R/3 Gui , SAP Portal.
    I have gone thro various links and the following links i have found to be informative and helpful :
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
    http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
    http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
    However, would like to know the following because am not getting the clarity :
    1) Is there any supported platform / compatibility guide for DMS ?
    if yes, can someone send me the link?
    2) We have oracle 11g as our for SAP R/3 backend.
    Windows 2003 server 64 bit system.
    When i check the system status on the dev server of sap.
    It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
    After much search on the SMP site,
    we finally discovered and downloaded the DMS software for unicode and / 64 bit.
    Which we saw under the maintenance components separately seen for DMS 7.0
    Now for this DMS content server which we would like to make it external for storage of documents -
    do we need to have a separate database for this purpose as a repository.
    If i run a setup of DMS - will that automatically install any default repository for this or
    will it allow me to choose any other repository for the same ?
    Can anyone advise on this.
    Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
    3) I read some thing like this on some of the SDN links :
    P40 - Integration of DMS
    P62 - R&D Document Manage¬ment and Workflow
    P71 - Document management
    What are they referring to.
    4) We would be accessing these thro web, gui, customised portal.
    This content server configuration is a bit confusing.
    5) Is SNC configuration required to be done for the separate DMS server setup.
    If yes, how to do that ? any configuration link for that please ?
    Can anyone advise on the things to do.
    Steps to do.
    What all are the pre-requisites to check, before we start the set up of DMS.
    Can anyone help me understand this whole thing regarding the DMS installation and configuration.
    Step-wise.. from the start to end.
    Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
    Many thanks for your help in advance.
    Wishing you a happy and relaxed weekend.
    Kind regards
    Indu

    Thanks christoph & pradeep kumar.
    did a few more research and atleast have come to understand that.
    DMS server installation has content server which works only with MAXDB.
    So my understanding is correct.
    And what we see as Easy DMS is a client installation.
    which probably i would look at at a later stage.
    Found this link to be a little more informative :
    http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
    I really wish. That life were to be so easy. To call a consultant and finish it off
    Wishful thinking
    thanks and cheers
    indu

  • How to have Multiple Configurations for a Flex Application

    Hi All,
    I've seen this question asked in various forms multiple times, but never answered: How do you set up a FLEX configuration to have different configurations for development (local), test server, staging server, beta server, and production server? I cannot imagine that Adobe has not accounted for this, something that is very standard in most development teams. Zend Framework has a very elegant solution for this: in the configuration file you define all aspects that can be configured, as well as the various environments (development, staging, beta, live, etc.). Then, in the bootstrap file you specify which environment you want to work in, and you're all set.
    How can something like this be achieved in FLEX?
    Many thanks!
    -Mike

    Maybe my setup is unconventional, I doubt it, though:
    1) SVN repo stores FLEX and PHP codebases in separate projects.
    2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
    3) Developer then publishes Flex app to staging server. -> need to configure FLEX to point to staging PHP code here.
    4) Flex app then gets published to live server. -> need to configure FLEX to point to live PHP code here.
    Now, using ANT, the scenario would look like this:
    1) SVN repo stores FLEX and PHP codebases in separate projects.
    2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
    3) Code is good and developer checks it back into SVN.
    4) ANT extracts latest build from SVN and builds it, then publishes to staging server. -> need to configure FLEX to point to staging PHP code.
    I am using PHPUnderControl as my build server for PHP.
    I am also unclear as to how my goal could be achieved using ANT?
    Thanks!
    Mike

  • ASA 5505 configured for WebVPN connecting to Citrix Web Interface

    ASA 5505 configured for WebVPN connecting to Citrix Web Interface.
    i have a ASA 5505 that I am attempting to configure for WebVPN with passthrough into Web Interface .  The user authenticates into WebVPN OK and gets the option to click on the Citrix Link (which is i add bookmark  citrix server http:// 172.30.40.5.) i enter the citrix and then for example  i want to open to outlook it can not open. (when i want to open some application no application is open)).there is no alarm at asa. how i solve this issue?
    thanks.

    Teymur,
    Can you confim that after disabling the ssl/tls on the Citrix server (secure connectivity) that you are getting exactly the same error.  It is possible that it is generating a different error.
    The bug where we have see the existing error was CSCtf06303 but that has been fixed in 8.4.1.  Can you confirm the exact version of code you are running on the ASA.
    If you have confirmed the above two notes it may be adventageous to open a TAC case as we may need to do some live additional troubleshooting.
    Thanks
    -Jay

  • Financial Reporting Studio 11.1.2.1 PDF not Configured for Web Server

    I have installed EPM 11.1.2.1, and HFM, Planning, Essbase, Financial Reporting are all working fine except when I do a report preview in the Workspace an error is received that PDF has not been configured for this Web Server.
    I have uninstalled PDF and Financial Reporting then re-installed them but I am still getting the same error. Also, I when I tried to view report from Workspace in Financial Reporting Studio, I received the following error:
    error number 400 Error Description:Form already displayed; can't show modally. Function: ShowMsg. Module:GblMethods.
    Your help would be gracefully appreciated.

    You should review all installation guides, readmes, and the certification matrix before performing a Hyperion Installation and/or Upgrade.
    Version 9.0 of Ghostscript is not supported, install ghostscript 8.6.3 - 32-bit.
    From the 11.1.2.1 Certification Matrix: "Either: --Adobe Acrobat Distiller Server 8.0 or 6.0 --GPL Ghostscript 8.63; AFPL Ghostscript 8.54 or 8.51; or GNU Ghostscript 7.0.6"     
    From the 11.1.2.1 Installation Guide Page 110: "Ensure that a supported 32-bit version of Ghostscript is installed."
    See http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls
    http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121.pdf
    Regards,
    John A. Booth
    http://www.metavero.com

  • Want to use an iPod photo configurated for Mac on a PC

    I want to use my old iPod photo (configurated for Mac) on a PC (but do not need to keep my songs and photos). Is this possible? If so, what do I do?
    iMac G5   Mac OS X (10.4.8)   iPod 5th generation 60 GB

    If your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. Macs can read Windows drives so you could restore and format the iPod on a PC, this would also mean any future software updates would have to be done on Windows. This will erase your drive so you need to have your songs and photos backed up. Alternatively there are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance gets good reviews and has the functionality to let you copy content from the iPod to the PC. Not sure if it does photos but have a look: XPlay 2
    You can read another user's experience of using XPlay at this link: iPod on Mac and Windows

  • SAP IDES ECC 6.0 configuration for ess/mss

    Hi,
    Iam new to sap . i want to practice various scenarios in ess/mss in my own pc which  is installed with ecc 6.0 . what are the configuration to be made in ecc 6.0 for maintaining about 10-20 users for  using ess/mss scenarios. i have a knowledge on webdynpro java and little knowledge on ep and using r/3 server. The 10-20  users created should be able to use ess/mss through portal .
    So, list the steps configuring for 10-20 users for using ess/mss in ecc ides 6.0 server.
    Thanks & regard
    prasad

    << Do not post the same question across a number of forums >>

  • Is it possible to run TWO parellel configurations for one Object??

    SAP Gurus,
    We have a strange requirement from the client to have to configurations established in the system for one configuration object.
    Without taking much of your time let me paraphrase the requirements.
    The client is having two different types of putaway strategies in their current business process. And they toggle between these putaway strategies by reaching out to their production support group and they make configuration changes to have the other put away strategy
    One Step Putaway: GR area --> High Rack Storage
    Two Step Putaway: GR area --> Interim storage (area at the end of each aisle of high rack storage) --> High Rack
    Client wants to have two parallel configurations for both of these put away strategies and needs an ability to switch from one to another. This switching ability should be accessed from SAP screen without any IT intervention (no configuration)
    -  Switching ability should allow the warehouse manager to change from one step to two step put away strategies without any IT intervention.
    -  Switching ability should be accessed my SAP Screen (Z-transaction or something with a radio button to toggle around)
    Is it possible to have two configuration made for Putaway Strategies and switch them on/off depending on the warehouse needs??
    Your invaluable feedback on this will be highly appreciated.
    Thanks again folks,
    Dhaval
    Edited by: Dhaval Joshi on Mar 4, 2008 12:09 PM

    Q1--I don't believe it is possible. An organization can have multiple licenses tied to its main email address, for example, but then they are assigned to the individual users.
    Q2--Yes, you would just need to log out of your account within the CC desktop app prior to logging in on the other account.
    If you have any questions, feel free to reach out.

  • How can I list all the domains configured for Weblogic Servers?

    How can I list all the domains configured for Weblogic Servers?
    I saw a note, which says the following:
    "WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
    In my case, I just want to list all the domains, is that possible by using any scripts?
    Thanks
    AJ

    If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
    <MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
    Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

  • How to get the number of decimal places configured for a site column

    Hi,
    I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
    The column conatins a value, but when retrieved programatically is displayed as 5.00000000  instead of 5.00.
    I am retrieving this column using listitem.Properties[field.InternalName].
    I need to trim the decimals based on  number of decimal places configured for the site column.
    How to get the number of decimal places configured for a site column?
    Thanks in advance,
    dhijit

    Get the field as SPFieldNumber and then check DisplayFormat which returns
    SPNumberFormatTypes
    SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
    SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

  • Getting SPWeb.CurrentUser as null with Windows Authentication (AD), when configured for Claims Authentication

    Hi All,
    We recently migrated to SP 2013 from SP 2010. We are using most of the OOB features, with a few custom code. We have implemented a custom ASP.NET Membership Provider that authenticates against a web service. This was working fine on SP 2010.
    The entire code base was migrated to SP 2013 (with .net fw 4.5, etc) and any issues Compile / Runtime were fixed. However, we are stuck at one bug, which seems to be occuring only while trying to login with Windows Authentication. When a user tries to login
    with Forms Authentication, the error is never noticed.
    Scenrio: Login as Windows Authentiction.
    Result: The user is signed into the system and is authenticated against the AD. For random page loads - it throws access denied (even though he is a site collection admin). While attaching a debugger, we found that, at times the SPWeb.CurrentUser is null (weird).
    At the same time, the HttpContext.Current.Request.IsAuthenticated returns true. Which means the User is Authenticated, but not available in the SPWeb.CurrentUser object. 
    Attached are couple of ULS Logs that we found. The line which says IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 is a little disturbing. Can you please let me know what is happening here? I am not able to access the root site (http://win2012d2:1234/)
    however, i am able to access (http://win2012d2:1234/SitePages/Home.aspx) just fine, without any issues.
    Please note, this error is only when the user is logged into sharepoint as a windows user. The forms user faces no such issues.
    ULS Logs:
    Name=Request (GET:http://win2012d2:1234/)
    Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0
    Application error when access /, Error=Exception of type 'System.ArgumentException' was thrown.  Parameter name: encodedValue  
     at Microsoft.SharePoint.Administration.Claims.SPClaimEncodingManager.DecodeClaimFromFormsSuffix(String encodedValue)    
     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix)    
     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)    
     at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromLoginName(String loginName)    
     at Microsoft.SharePoint.ApplicationRuntime.SPHeaderManager.AddIsapiHeaders(HttpContext context, String encodedUrl, NameValueCollection headers)    
     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PreRequestExecuteAppHandler(Object oSender, EventArgs ea)    
     at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
     at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Getting Error Message for Exception System.ArgumentException: Exception of type 'System.ArgumentException' was thrown.  Parameter name: encodedValue    
     at Microsoft.SharePoint.Administration.Claims.SPClaimEncodingManager.DecodeClaimFromFormsSuffix(String encodedValue)    
     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix)    
     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)    
     at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromLoginName(String loginName)    
     at Microsoft.SharePoint.ApplicationRuntime.SPHeaderManager.AddIsapiHeaders(HttpContext context, String encodedUrl, NameValueCollection headers)    
     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PreRequestExecuteAppHandler(Object oSender, EventArgs ea)    
     at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
     at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    [Forced due to logging gap, Original Level: Verbose] Looking up {0} site {1} in the farm {2} 
    Unknown SPRequest error occurred. More information: 0x80070005
    SPRequest.GetPageListId: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://win2012d2:1234/
    System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)), StackTrace:   
     at Microsoft.SharePoint.SPContext.get_ListId()    
     at Microsoft.SharePoint.SPContext.get_List()    
     at Microsoft.SharePoint.WebControls.ScriptLink.InitJs_Register(Page page)    
     at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
    Boolean ignoreFileNotFound)    
     at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)    
     at Microsoft.SharePoint.WebControls.ScriptLink.Register(String uiVersion, Control ctrl, Page page, String name, Boolean localizable, Boolean defer)    
     at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer)    
     at Microsoft.SharePoint.WebControls.ScriptLink.GetOnDemandScriptKey(String strKey, String strFile, Boolean registerDependencies, Control ctrl, Page page)    
     at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)    
     at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Page page, String strFile, Boolean localizable)    
     at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
    Boolean ignoreFileNotFound)    
     at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)    
     at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)    
     at Microsoft.SharePoint.WebControls.ScriptLink.OnLoad(EventArgs e)    
     at System.Web.UI.Control.LoadRecursive()    
     at System.Web.UI.Control.LoadRecursive()    
     at System.Web.UI.Control.LoadRecursive()    
     at System.Web.UI.Control.LoadRecursive()    
     at System.Web.UI.Control.LoadRecursive()    
     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)    
     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)    
     at System.Web.UI.Page.ProcessRequest()    
     at System.Web.UI.Page.ProcessRequest(HttpContext context)    
     at System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride)    
     at System.Web.HttpServerUtility.Execute(String path, TextWriter writer, Boolean preserveForm)    
     at System.Web.HttpServerUtility.Transfer(String path)    
     at Microsoft.SharePoint.Utilities.SPUtility.TransferToErrorPage(String message, String linkText, String linkUrl)    
     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorHandler(HttpApplication app, Boolean errorIsOnErrorPage)    
     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorAppHandler(Object oSender, EventArgs ea)    
     at System.EventHandler.Invoke(Object sender, EventArgs e)    
     at System.Web.HttpApplication.RaiseOnError()    
     at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)    
     at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)    
     at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)    
     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)    
     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)    
     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)    
     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)    
     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)    
     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
    SPRequest.OpenWeb: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://win2012d2:1234/
    System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)), StackTrace:   
     at Microsoft.SharePoint.SPWeb.InitWeb()    
     at Microsoft.SharePoint.SPWeb.get_WebTemplateConfiguration()    
     at Microsoft.SharePoint.WebControls.ScriptLink.InitJs_Register(Page page)    
     at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
    Boolean ignoreFileNotFound)    
     at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)    
     at Microsoft.SharePoint.WebControls.ScriptLink.Register(String uiVersion, Control ctrl, Page page, String name, Boolean localizable, Boolean defer)    
     at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer)    
     at Microsoft.SharePoint.WebControls.ScriptLink.GetOnDemandScriptKey(String strKey, String strFile, Boolean registerDependencies, Control ctrl, Page page)    
     at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)    
     at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Page page, String strFile, Boolean localizable)    
     at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
    Boolean ignoreFileNotFound)    
     at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)    
     at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)    
     at Microsoft.SharePoint.WebControls.ScriptLink.OnLoad(EventArgs e)    
     at System.Web.UI.Control.LoadRecursive()    
     at System.Web.UI.Control.LoadRecursive()    
     at System.Web.UI.Control.LoadRecursive()    
     at System.Web.UI.Control.LoadRecursive()    
     at System.Web.UI.Control.LoadRecursive()    
     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)    
     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)    
     at System.Web.UI.Page.ProcessRequest()    
     at System.Web.UI.Page.ProcessRequest(HttpContext context)    
     at System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride)    
     at System.Web.HttpServerUtility.Execute(String path, TextWriter writer, Boolean preserveForm)    
     at System.Web.HttpServerUtility.Transfer(String path)    
     at Microsoft.SharePoint.Utilities.SPUtility.TransferToErrorPage(String message, String linkText, String linkUrl)    
     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorHandler(HttpApplication app, Boolean errorIsOnErrorPage)    
     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorAppHandler(Object oSender, EventArgs ea)    
     at System.EventHandler.Invoke(Object sender, EventArgs e)    
     at System.Web.HttpApplication.RaiseOnError()    
     at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)    
     at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)    
     at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)    
     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)    
     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)    
     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)    
     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)    
     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)    
     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

    Hi Mohamed,
    According to your description, my understanding is that the error occurred when users login with Windows Authentication.
    From the error message, I recommend to check if the anonymous access is enabled for the web application.
    And please also make sure that the users all are available and have permission to access the site.
    Here is a similar thread for you to take a look:
    http://social.technet.microsoft.com/Forums/en-US/28623bdc-a2f0-4876-9be4-9a764f106366/getting-spwebcurrentuser-as-null-with-windows-authentication-ad-when-configured-for-claims?forum=sharepointdevelopment
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • MM configurations for SAP AFS System

    Hi,
            I'm working in MM configuration for SAP AFS production system, After uploading AFS Materials successfully and also created Purchase order to make a stock for that material, but PO created successfully but not able to do Goods receipts for created PO.
           Errors : Purchase order xxxxx has no items,
    Once created sales order for the same material again we got the error while GR but error is different.
          GR is not possible for this PO number.
    But material type is ROH , and its external procurement only.
    Please let me know when we will get this type of errors.
    Thanks and regards
    Nisar.

    Hi Nasir;
    Some possible causes are;
    1.     Defining inbound delivery (Or kind of a confirmation) in the PO LI level and not maintaining the document subsequently
    2.     Not releasing the PO before the GRN
    3.     Creating the PO with a material with Grids (AFS Basic Data Screen) and not maintaining the grid value at item detail level of the PO
    Azwath Mohammad
    http://www.sapafs.net

Maybe you are looking for

  • "Unable to load network list" instead of "Hello..."

    I am using my 3G iPhone for more than 6 months. Latest OS 2.2.1, and previous versions are causing a lot of headaches when I switching my iPhone upon arrival. I am travelling a lot in Europe, every day; I have a Company phone, old Nokia 6300 and my p

  • Post-Kernel Panic: Various questions on iTunes, mail, stability, help!

    I recently experienced a Kernel Panic on my Macbook Pro from late 2010 (2.53 ghz, 4 gb ram, 500 gb OS X snow leopard etc). First, a quick overview of the Kernel Panic process: I had a lot of stuff running simultaneously, and the system started hangin

  • I can't sync my iPad to iTunes after I trust my Sony Vaio Laptop Windows 8. Please help.

    Hi I tried to sync my iPad on my laptop and I plug into my laptop and touch the trust this computer but it doesn't show up on iTunes. Please help me to solve this problem

  • ITunes Upgrade results in no access to ITunes Store

    I've recently downloaded the latest version of Itunes (9.2.1.5) as since doing so I cannot access the ITunes Store. Prior to downloading this laterst version, I had no trouble with access. I've tried deleting the download and re-installing it, and I'

  • Hi Material on Scripts

    Hi Experts,              Please can any one send me the material on SAP Scripts From Basic. Points will be rewarded.               Thanks in advance. Thanks and Regards Srihari.