Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit)

I can't reinstall Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit).  When I went to Linksys site for solution for new drivers, it asked me for Hardware Version Number.  This model doesn't show one.  Any thoughts?
Thanks!

Sabertooth is right. If you are able to go online from your Router then you don't need to install LELA software on your Computer.

Similar Messages

  • Linksys Easy Link Advisor usage

    Is it possible to input info to this server. I do not want to install Linksys Easy Link Advisor (LELA) to client computers as I do not want to share that info with client users.
    I do however want to gather more information on how these clients connect to my network. Now I kind of know which ones connect wirelessly and which ones wired. I also know which ones connect through the access point rather than directly to the router.
    What I want to do is either install LELA-like software on these client machies for them to automaticaly transmit their info to the network (so that my LELA can pick it up) or manually input this info into LELA on my end.
    Also a way to modify the images of individual items would be nice.

    You can go through this link and check if that helps you.

  • Linksys Easy Link Advisor [ Lan Connected Users]

    Hi. I am using Linksys Easy Link Advisor, I am using my Laptop and is connected through Wireless mode, Now one of my computer is connected through Lan line [ Ethernet cable]. The Lan line and Wireless both computers are working properly, but while I am using Wireless Laptop I am unable to watch Lan Connected computer.
    In Router setting I have enabled Wireless MAC Filter and all the computer like Wireless and Lan Line computers are registered. But in Linksys Easy Link Advisor the Lan Line computer dosen't appear.
    Please Help.
    I am thankful from your team side which has helped me in solving many problems for Linksys Easy Link Advisor.
    Solved!
    Go to Solution.

    I have Linksys Easy Link Version 3.11 (Build  9139.94)     Platform Version   11.1.9051.0
    I connected my Laptop wirelessly through this and now I connected one  more Laptop through Lan [ Ethernet Cable]. But I am unable to see this Lan Connected Computer. The Wireless computer can be viewed.
    I disabled firewall from all like Windows Firewall  Trend Micro Firewall, Still unable to add Lan [ Wire connected] computer through my Laptop which is wireless connected. But still I cant see the Lan Connected Computer on  Wireless Computer.
    Is there anything to do in router. I have Linksys  Wag160N ADSL2+   [MAC-00226BF1F82]
    Please help me.
    Thanks.
    Ghanshyam,
    Dubai   U A E
    (Mod note: Edited for guideline compliance.)

  • Linksys Easy Link advisor

    I installed the advisor and now tried to put my log in it got error message   MSG 100 000 000 what to do?
    Solved!
    Go to Solution.

    Thanks for the reply. I was using WEP SECURITY.  I  changed to Highest Security and changed the pin.  It worked. Thanks another problem is the Icon for Linksys Easy Link Advisor dosen't comes automatically when I start or restart my Laptop. I have Windows Vista operating system and the programme is updated automatically every time when I go online. Please help me to resolve the problem that how this Icon comes automatically on Task Bar.

  • Linksys Easy Link Advisor Icon on task bar.

    I have installed the Linksys Easy Link Advisor software, I have configured everything correctly and is now  working  perfectly. I have Windows Vista and it is updated automaticaly. Only one problem is that the Icon for Easy link Advisor dosen't appear, I have to double click on the Icon on  my Desktop then it starts on the task bar. In the Guide for  Easy link advisor it says that the Icon will remain their. But when I start or restart it dosen't comes to status bar on the bottom right side  where all other Icon comes like Clock, Network  etc. Please help me to solve this or any thing is their then I will go accordingly.
    Ghanshyam
    Solved!
    Go to Solution.

    You can go through this link and check if that helps you.

  • Is the linksys easy link advisor 3.0 LELA compatible with my WRT54GS Version 1 wireless adaptor

    Hi
    I just upgraded to windows 7 and I am trying to reinstall my wireless security using WEP with the Easy link advisor 3.0 but keep getting a message that says the method or operation is not implemented. When I was running XP and the older version of easy link I had no trouble setting up the security and adding computers to the system. Any help would be appreciated
    Thanks

    Exit the Program, 
    Try to edit the compability, right click on the program icon/properties/ check the compability to run on windows xp2.
    Hope this help.

  • Can no longer connect to wireless router after upgrading to iTunes 9.2

    My wireless connection was fine (using MacBook). After upgrading iTunes, I can not longer connect to router/modem wirelessly - am tethered with an ethernet cable. Spent 1 1/2 hours on phone with AT&T support reseting the passwords, security, etc. A PC laptop accepts password and can connect. My iPhone still can connect. But my MacBook (OS X 10.6) will not recognize my password for the modem/router. Everything has been re-booted and reset to original settings. Also, I received an iPad yesterday and it won't accept the password for our home wireless network. The password is correct because I am using it on other devices that are connecting to the network. Any ideas?

    Yes, but the issue is not with Lion directly; there seems to be something with the upgraded system, perhaps a legacy setting or pref... I've scoured the system to no avail. I'm actually about to reinstall 10.6 - wasted too much time on this issue.
    Thanks for your help.
    D

  • Difficulty  connecting with my apple airport wireless router after upgrading to Mountain lion

    I am using a 5GHz band. The system connected much quicker before I upgraded but now may take minutes before it will connect using Safari. any ideas?

    I am using a 5GHz band. The system connected much quicker before I upgraded but now may take minutes before it will connect using Safari. any ideas?

  • Keyboard wireless key not working after upgrading to windows 8.1

    Hello,
    I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
    Kindly suggest me some solution.
    Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
    Thanks.

    Hi @Jayesh_Bhadja ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
    The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook.  Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
    Make sure all your updates have been completed. I would try restarting my Notebook a few times.
    If that does not help I would uninstall the keyboard from the Device manager.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Easy Link Advisor

    I have a Linksys WRT54G wireless router that I had setup and installed no prob on my desk top, then I moved and was having internet problems so I decided to just uninstall all the soft ware off of the computer and restore the factory defaults on the router and reinstall the whole thing from scratch. Now when I go to reinstall it I can't get the software for easy link advisor back which I really want. last time it installed the software during the install part but when I put in the CD and click setup then one of two things happen
    1. if the router is already hooked up it skips the setup and goeas right to configure which doesn't get me my software
    2. if the router isn't hooked up and I go through the install where it says step by step how to hook it up when I get to install part and it tells me there's no ethernet connection to the computer which is impossible because i'm online now and it works when I have it hokked up before the setup
    I can use the router but I just want Easy Link Advisor Back it was agreat app and when I try and down load it off the internet it just tells me TO USE THE SOFTWARE THAT CAME WITH THE **bleep** THING!
    I've called customer service but the call gets sent to india and I can barely understnd him through the accent and they tell me they don't support LELA their own software! If you know anything please help.

    Download the software from the web site www.linksys.com/easy or you can try set up wizard from www.linksys.com/downloads.

  • Uninstall easy link advisor software from windows 7

    Hello, 
    I installed a wrk160n using easy link advisor on a brand new windows 7 laptop.
    My experience with getting the router to work with my cable modem has not been very satifactory.
    I would now like to uninstall the easy link advisor, but get the following error message:
    "Service 'linsys updater' (linksys updater) could not be deleted.  Verify that you have sufficient privleges to remove a system service.
    I am logged onto the laptop with administrator rights. 
    What is the problem with getting the linksys software off a windows 7 machine? 
    Thank you,
    Tom

    No expert on windows 7, but I would assume that you may neeed to run the uninstall program as administrator. In vista, you can do it from the right click menu, but the easiest proly is to just log in as the actual admin.Even though I got admin rights in Vista, this stuff gets quirky.
    If all fails, maybe you can try to remove the service manually (google to see how).
    Message Edited by kamenjar on 12-09-2009 03:14 PM

  • Looking for a wireless router / accespoint with radio time restriction

    I am looking for a wireless router / accespoint with a radio time restriction but didn't find any information about this option. Are there any routers with the option to turn off the wireless signal between a specific time?
    The router will be used at a small office .
    I hope you can tell me more.
    Cheers
    Michel

    Well there is No router which linksys/cisco manufacture that can stop the wireless signals to be broadcast for a specific time..
    However what you can do is you can get into the setup interface of the router and disable the SSID broadcast and that will stop the router to broadcast the wireless signals...and whenever you need to enable it you can just go back into the setup page of the router and enable the broadcast again.

  • HT4145 Can I link up a Dlink wireless router to a Airport Base Station

    Hi All,
    need advise on whether can I link up a Dlink wireless router to a Airport Base Station and if can how do I set it up.
    with regards and thank you
    Chris

    If your goal is to either extend the D-Link's Wi-Fi network with the AirPort or the other way around, then the answer is no. That is because, most non-Apple routers are not WDS-compatible with the AirPorts.

  • Best place for DSL wireless router to aquire strongest signal

    Hi all
    I have a Westell DSL wireless router sitting on a Kensington surge protection base with antennas pointing straight up. Is this ok? My wireless internet connection is ok for now. What's the best place for my wireless router for the strongest possible signal?
    Thanks for your help
    Web dude

    Place it clear of HVAC ducting and away from any microwave or cordless phone base stations(s) in the house - these are the primary causes of wifi interference/noise and signal outages. Consider the area you want to cover (including any outdoor areas) and place the unit as near the center as possible.
    Download a copy of AP Grapher and observe the signal quality in your intended reception area(s) to help place the router optimally for best signal and lowest noise, including rotating the antennas if needed - vertical is perfectly OK, but you may get marginally better signal or lower noise by rotating them.
    AP Grapher can be downloaded from http://www.chimoosoft.com/products/apgrapher/

  • Why do I have to re-enter my password for my wireless router?

    I bought my brand new Macbook Pro yesterday and am pretty disappointed.
    Can someone please explain in very basic terms, how to keep my Mac connected to the internet? Every time I attempt to connect to the internet, I'm asked to enter my password for my wireless router. I also have a ThinkPad that's also new and it stays connected to the internet and once I entered my password for the router, it's stayed connected and I have never had to enter the password again.
    Did I make a mistake buying a Mac? I have time to return it, so any advice is much appreciated.

    Hi phog,
    When you're entering the password, are you being sure to check the "remember this network" checkbox that's on the box where you type your password in? If you don't, every time you reconnect to your network, you'll be asked to re-enter it. Also, is this happening only when you restart your machine or wake it from sleep, or is it happening every time you quit your browser and re-open it?
    Keep at it! There's a learning curve with any new equipment, but as someone who switched from PCs myself about five years ago, I can tell you that it's worth it.
    Hope that helps!
    —Hazy

Maybe you are looking for

  • Display issue in oracle reports

    Hi, The end user is getting the following error when executing a job in Oracle reports. " RWCGI GET JOB OUTPUT Cannot get output of Job ID 4 you requested on December ,08 2008 , 11:35:18 Job is not done yet .Try again later" The server version is ias

  • Potential Memory Leak in rmi

    We have a service that is being monitored via JMX. The JVM heap usage is growing and even major collections are not able to remove the garbage. Inspecting the heap shows garbage consisting of RMI related references (mostly, if not all, related class

  • Do we have any option to count the no. of pernrs to be printed.

    Hi , Do we have any option to count the no. of pernrs in an org. unit to be printed with subtotals in the pernrs column itself. Do we have any option for counter in SLIS itself. Thanks in advance, Sarika.

  • Standard text  -chinese characters!

    hi all , I am trying to set up chinese standard texts in cic9,copying chinese script from excel file . When i copy the text looks fine , but when i save and open the text, it display only boxes or funny characters. Can any one help on this .. I tried

  • Shuffle within playlist?

    Is it possible to shuffle songs just within a playlist? I have lots of other songs on Ipod, but wanted to just shuffle through one of my playlists. Any help appreciated! Thanks