Linksys M10 and Mountain Lion OS problems with Guest User - which router is best to upgrade to for Maverick and higher OS coming in fall?
Since we upgraded our OS to Mountain Lion the Guest User on the Linksys M10 router isn't working. Not compatible. Which Linksys should one upgrade to for use with Maverick OS and the newer releases coming this fall and onward?
Sorry - I have Maverick 10.9.4 and the guest user on the link sys M10 isn't compatible. Any suggestions on which wifi router to upgrade to for newer releases of OS coming?
Similar Messages
-
Will Lion (and Mountain Lion) be compatible with Photoshop CS3?
Will Lion (and Mountain Lion) be compatible with Photoshop CS3?
Try here > http://roaringapps.com/apps:table
-
Problem with"Evaluate User Policies"sch task after the upgrade OIM R1 to R2
Problem with "Evaluate User Policies" scheduled task after the upgrade from OIMg R1 to OIM 11g R2
After the upgrade process is completed we are having issue with Access policy not triggering if rule is set to custom attribute
- We had a Rule with custom attribute (Policy='Full-Time') the value gets populated by event handler which triggers the access policy in OIM 11g R1.. which worked fine in OIM R1
After the upgrade the value is getting populated but even after running "Evaluate User Policy" the Access Policy is not getting triggered.
We tested creating a rule with other custom attribute,policy does not trigger even after running Evaluate User Policy schedule Task in this case too
but if we try creating rule with OOTB attributes(Country='US') it works fine the access policy got triggered after running Evalute User Policy
One more issue we observed is
- Evaluate User Policy value usr_policy_update is not updated still set to '1' even after the Access policy got triggered (as it worked when rule is set to OOTB attribute)
I believe after the evaluate user policy gets triggered for a user it should update the value from '1' to '0')
Please let me know if you have any idea..Thanks!well, I overcame the issue by 'fooling' the installer: on second node, change the scan ip address to point to something else (ie, different ip address to the scan in the first node, cleanup then rerun root.sh, it went past the trouble stage, then I still have problem later at the time database creation. I think scan ip address has to be setup correctly (round robin thingy)
This is how i did the cleanup before rerun root.sh
/u01/app/11.2.0/grid/crs/install/rootcrs.pl -verbose -deconfig -force -
Mountain Lion download problems with Lion 10.7.5 (no VirusBarrier issue)
I have a mid-2009 Macbook Pro. From the factory it came with Snow Leopard but has since been upgraded to Lion OS X 10.7.5. I do not have VirusBarrier, I am writing from a recently clean-installed Lion.
I have now been troubleshooting my Mac for several days. When I wrote first, I had an issue with Safari having been damaged and so I wasn't able to reinstall Lion - but after a certain extremely helpful community member I finally succeeded in installing Lion.
But the issues with the App Store still persist. All my Mountain Lion downloads fail, getting the error message "can't verify, might be corrupted" what many here have also been getting. However, most solutions were related to VirusBarrier (which I don't have), or /var/folders errors (Console does not show any var-related errors).
So if it's not a var-related issue, or related to firewalls or virus softwares (I have disabled the Firewall and I have no virus software installed), what could it be?
When the download and install of ML failed last time, Console showed the following messages:
11/30/12 11:54:44.617 AM com.apple.SecurityServer: Failed to authorize right 'system.install.app-store-software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [235] for authorization created by '/System/Library/CoreServices/Software Update.app' [567]
11/30/12 11:54:44.617 AM com.apple.SecurityServer: Failed to authorize right 'system.install.software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [235] for authorization created by '/System/Library/CoreServices/Software Update.app' [567]
11/30/12 12:25:49.252 PM authexec: executing /Applications/Install OS X Mountain Lion.app/Contents/Resources/InstallAssistantTool
11/30/12 12:26:17.178 PM Install OS X Mountain Lion: Stopped operation queue with Error Domain=IAErrorDomain Code=101 "This copy of the Install OS X Mountain Lion application can't be verified. It may have been corrupted or tampered with during downloading." UserInfo=0x7f93aad17ee0 {IAErrorAlternateAction=App Store, NSLocalizedRecoveryOptions=(
Cancel,
"App Store\U2026"
), NSLocalizedRecoverySuggestion=Delete this copy of the application, and go to the Purchases page of the Mac App Store to download a new copy., NSRecoveryAttempter=<IARecoveryAttempter: 0x7f93aab1e1d0>, NSLocalizedDescription=This copy of the Install OS X Mountain Lion application can't be verified. It may have been corrupted or tampered with during downloading.}
...and a bit later, upon re-starting the download:
11/30/12 12:29:40.515 PM com.apple.SecurityServer: Failed to authorize right 'system.install.apple-software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [817] for authorization created by '/Applications/App Store.app' [781]
11/30/12 12:29:40.547 PM com.apple.SecurityServer: Failed to authorize right 'system.install.software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [817] for authorization created by '/Applications/App Store.app' [781]
Problem elimination:
* I don't think this is a router-related issue: I have downloaded and installed other softwares outside App Store successfully
* As said, I don't think this has anything to do with Firewall or Virus settings
* Nor has this anything to do with /var/folders as far as I can tell
What I've tried so far:
* Repaired disk permissions several times
* Rebooted
* Restarted App Store
* Following one advise found on the net, I deleted preflight.pfpkg just in case
* All the time I have made sure my OS has the most recent Software Updates installed (most of them downloaded successfully, while with Safari and OS 10.7.5. I had to try several times before they were downloaded succesfully)
I just reinstalled my OS X Lion, only to use it to jump on to Mountain Lion - so I am pending my migration until ML is installed. I would like to fix this soon, since I'd like to get the migration done and my real work started. I would really appreciate your help.
I'm not very adept at using Console or Terminal to troubleshoot, so if someone could guide me through the problem identification, that would be great. Unless someone already knows exactly what's going wrong and can show me a working solution - that'd save my day!
Thanks!In cases like this, if you have an Apple store near by, they will most likely install the OS free of charge for you, if you can't bring your Apple ID along to prove you've paid for it.
Would that work out for you? -
Apple tv and Mountain Lion Mirror problems
Hi so I upgraded to Mountain Lion the day it came out on my macbook pro and so far im really happy with it. But I am all of the sudden having problems mirroring it on my apple tv. I worked fine up until about a week ago and now it doesnt seem to want to work. When I click on the mirror icon nothing happens, I just turns blue around it for about 15 secs and then nothing. I have tried everything and im lost. HELP!
Do a reset of apple tv and try again,in case it still is having issue check if you have latest updates on Apple tv as well as for mountain lion.
-
I thought I had a problem with my Ipad in which I didnt, so I backed up my Ipad and restored it, but now Some of my apps that I have purchased are not available only the free version, not the purchased version. I would have to purchase again and it is not backed up into my Icloud either ?
I assume that you will have to set up as new since it will not let you restore from the backup. Then after you set it up, you can restore from the iCloud backup. The backup should not disappear be use you are setting this device up as new. Your backup should still be in iCloud.
However, after you activate the iPd and update the software, you will have to erase the device in order to restore from the Cloud backup, that is the only way to get to the iCloud backup.
Copied from the article that linked you to this discussion ....
Resolution
Update your device to the latest version of iOS to be able to restore the backup. -
I am having a problem importing my images into Aperture 3 from my Nikon D800E. The images appear as if red paint was splashed across the sky. The Nikon software used to transfer from the camera does not show this problem and Photoshop 6 is fine with the images exported as jpg from the Nikon software. Aperature does not even like the jpg images usable by Photoshop. I am suspecting that Aperture is not correctly using the camera raw file. Also, the histograms are radically different between the corrupted images and the Photoshop (good) versions. Aperture worked just fine for me in June with the same camera. All drivers and software are current as of this posting. Anyone else out there seen this before??
Are you sure you do not have Highlight Hot & Cold Areas turned on? (View->Highlight Hot & Cold Areas)?
The bug in Digital Camera raw only affected Raw images. In your first post you wrote:
Aperature does not even like the jpg images usable by Photoshop
If the JPG's have the same problem then it isn't this bug.
regards -
Mountain lion sleep problems with time capsule
Macboob Pro 15' 8 Gig Memory, mid 2011
My MBP hangs and won't wake from sleep. After I reset, I found out that the Time Machine is doing backups even while the MBP is sleeping.
Is there a way to prevent backups while sleeping?
ThanksIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting. -
I am unable to merge events as all drop downs in the events selection in the tool bar are greyed out. Is there a solution?
Thank you.
I tried to drag one event into another event but was unable to do so. The event that I tried to move into a second one would only move to another position in the event columnn, but it would not merge into another one. -
I Just upgraded to mountain lion os x to 10.8.1 and I have a problem with restart my computer
I Just upgraded to mountain lion os x to 10.8.1 and I have a problem with restart my computer.
Now my computer is stuk on restart and wont turn on.
Can somone help me with it?
Thanks.If Mende 1's suggestion doesn't solve it you might find the following useful:
I would first reset the SMC:
Shut down and unplug the Mac.
Keep the Mac unplugged for at least fifteen seconds.
Plug the Mac back in and do not turn it back on for at least five seconds.
Press the power button to turn the Mac back on.
Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
Hope this helps -
Will an iMac mini and mountain lion work with a touch screen monitor?
I was wondering if Mountain Lion would work with a touch screen monitor. I have a project in mind and this is a key part to the equation. If any one could help this would be greatly appreciated. Thanks in advance.
I do Not know for certain, but from my understanding, touch screen interfaces require that the OS version used to drive them be "designed" from the beginning to operate within that environment. Obviously, at this point OS X has Not been designed to function that way (non of the Mac's using it work that way); although the mobile version, iOS 6, used in iPhones and iPads was indeed designed from scratch to operate that way. So one day sometime down the road it's possible that OS X too will share this ability. But not yet.
Hope this helps -
Voice dictation,Dragon Express and Mountain Lion
Are there any other users out there who want decent voice dictation software that doesn't depend upon being online all the time and speaking to the clouds?
Not everyone can be online all the time: moreover there's an old saying that 'walls have ears' - well there's a new saying that 'clouds have ears' . The new dictation facility that comes with Mountain Lion is quite a promising catch-up application, but it only works if you are online to the clouds. But the cheap price of the ML upgrade comes at a hidden cost. I recently bought Dragon Express for £39 from the App Store to use for voice dictation and have found out that it does not work under Mountain Lion.
I used to use IBM Via Voice for the Mac but that did not survive the change from System 9 to System X. Will Nuance get fed up with Apple's policy towards 3rd party developers and will they let their Dragon voice software for the Mac go the same way?
TeyaIntriguing, someone left it on "works fine" on http://roaringapps.com/app:402 for both Lion and Mountain Lion on version 7.2.3, yet when you look at the versions 7, 8, and 9 of Logic Express under the Versions section of the website, nobody was able to get it to work. Given that is the case, I edited the status to "some problems." I'll ask your post get redirected to the Logic Express forum to get the facts.
-
i recently bought a new 15" retina/mountain lion laptop after researching to be sure that i would be able to use the existing software that i have.
Logic being the most important that i use. i saw there was issues with Loci 8 and mountain lion, and that upragind to Logic 9 would solve the issue.
there is a GREATER issue than that. i CAN NOT install Logic 8 on my new machine.
HOW DO I USE THE ABILITY TO UPGRADE WHEN I CAN INSTALL MY ORIGINAL PURCHASED COPY. i have two weeks left, if the only solution offered to fix this is to BUY Logic 9 after spending as much as i did on the machines and software....this machine will be going back and might have to reconsider the whole apple thing.
someone please help me out. i REALLY dont wanna change machines again.
thanks
peteIntriguing, someone left it on "works fine" on http://roaringapps.com/app:402 for both Lion and Mountain Lion on version 7.2.3, yet when you look at the versions 7, 8, and 9 of Logic Express under the Versions section of the website, nobody was able to get it to work. Given that is the case, I edited the status to "some problems." I'll ask your post get redirected to the Logic Express forum to get the facts.
-
Hi there, Not sure if this is the right post for this but I am running a 15" MBP Retina with Mountain Lion, all of my software is up-to-date.
This evening I was on my home wifi like normal, and my computer all of the sudden dropped the connection.Other wifi connections were still showing up in the dropdown and Both my wife and I's iphones were still connected to the home wifi. I figured the router needed to be reset so I did that, and no change.
I've tried manually "Join Other Network" and still nothing, I've cleared my preferred networks list and then re-added the home wifi to the list, still nothing. Ran a scan to make sure it wasn't a spyware bug or something like that, nothing. From what I understand this issue is pretty common with Lion and Mountain Lion.
Can anyone help? I'd prefer to not have to go in and change my router settings as that isn't really fixing the problem, it sounds like its in the Lion software, wondering if there are any other fixes to this problem?
Thank you in advance!Maybe these will help:
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix -
Sql Devloper 4.0.0.13 - problems with displaying user data types
Hi,
I have installed new version of sqldeveloper and have discovered some problems with displaying user data types. The data that is described as VARCHAR2 are displayed with ‘???’.
The problem persist in table view, script output and exported files.
My type is described as follows:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE NUMBER,
ID_DPSF_MJESTA NUMBER,
OPCINA VARCHAR2(100),
MJESTO VARCHAR2(100),
ULICA VARCHAR2(200),
BROJ VARCHAR2(20),
SPRAT VARCHAR2(20),
OSTALO VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
when make select column from table that contains this type I get next results:
CASE 1:
SQLDeveloper Version 3.2.20.09; Build MAIN-09.87; JDK 1.6.0_43; Windows 7 64 bit
Select:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result:
ID ADRESALOKACIJA
1 COMP.DPTY_ADRESA(124,4913,'TRAIK','TURBE','BABANA','3452','0',NULL)
END CASE 1;
CASE 2:
SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_40; Windows 7 64 bit
Select1:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result1:
ID ADRESALOKACIJA
1 COMP.DPTY_ADRESA(124,4913,'???','???','???','???','???',NULL)
But if I select one element it is displayed normal.
Select2:
select id, a.adresalokacija.opcina
from dptr_saglasnosti a
where id = 1;
Result2:
ID ADRESALOKACIJA.OPCINA
1 TRAVNIK
END CASE 2;
I have tried this scenario on three different pc with same output.
Pleas help me to get rid of the '???' in result.
Best Regards,
OmerI tried on SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_45; Windows 7 64 bit; NLS setting is default
all data can show,No ??? in result
Test step as following:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE NUMBER,
ID_DPSF_MJESTA NUMBER,
OPCINA VARCHAR2(100),
MJESTO VARCHAR2(100),
ULICA VARCHAR2(200),
BROJ VARCHAR2(20),
SPRAT VARCHAR2(20),
OSTALO VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
alter TYPE "DPTY_ADRESA" add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
CREATE TABLE dptr_saglasnosti (
adresalokacija DPTY_ADRESA,
id number);
INSERT INTO dptr_saglasnosti VALUES (
DPTY_ADRESA (65,225,'Vrinda Mills', '1-800-555-4412','sss','aaaa','eeeee','attta'),1 );
select id, adresalokacija from dptr_saglasnosti where id = 1;
ID ADRESALOKACIJA
1 HRCP.DPTY_ADRESA(65,225,'Vrinda Mills','1-800-555-4412','sss','aaaa','eeeee','attta')
Maybe you are looking for
-
I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my
-
Payment made against cost booked in costcenter
We assign the costcenter for expenses,is there any report we can know in Costcenter accounting ,the payment made for these expenses posted to costcenter.
-
Error in Automatic payment Run F110
Dear experts, I made proposal through F110, when I tried to run Proposal then the message "Proposal has been released " appears. can any one help me. Thank you! Murali
-
Confirmation Mail Problem (urgent Solution) Please
Dear Guys, After over the Registration Process, I want to send one confirmation mail. Mail Coding is properly worked. Only mail sent to my company id. But not to send yahoo, rediff and other things. what is the problem. I have changed the coding lot
-
Consolidate YTD Member in Scenario Dimension
Hi All my Peers, What Exactly the Purpose of " Consolidate YTD Member in Scenario Dimension. my Analysis is as bellow, please Guide me if my Thinking is Wrong and also is this Member Focus and Refer or Check or Cross Check with any other Member to St