Linksys Phone Adapter PAP2 question

Can i connect two Linksys Phone Adapter PAP2 to one linksys router without creating any networking issues ?

chojna wrote:
Can i connect two Linksys Phone Adapter PAP2 to one linksys router without creating any networking issues ?
Yes you can connect them.  Each will get a different local ip address and the router is supposed to keep the port numbers straight.  It is easy to change the sip port numbers on one of the PAP2 adapters and to also change the RTP port range on that adapter.  Then you don't have to worry that the router can't keep those port numbers separated and you more or less have to make this change if for some reason you need to forward the port numbers in the router.
Message Edited by hw on 12-28-2009 08:49 AM

Similar Messages

  • No incoming calls at all Linksys phone adapter SPA2102

    I was wondering if anyone can help me. The phone company I was with went under and I am having major difficulties with hooking my linksys phone adapter up to my computer through a router. I can make outgoing calls but everytime that someone calls in it goes strait to the answering machine. Can someone please help me this has been like this for three weeks. I have a D link router that I need my Linksys phone adapter (VOIP) SPA2102 to go through. Please Help !!!!!!!
    Message Edited by tinabeebe28 on 10-24-2008 08:51 AM

    tinabeebe28 : SPA-2102 also contains router with NAT.
    By default, it's only possible to access the SPA-2102's internal WEB from the PC hooked to LAN socket of the SPA-2102 ... WAN web access is disabled by default in the config. Also, the IP may not be 192.168.0.1, this is configureable.
    I advice you to use the IVR function (**** 210) from the phone in LINE1 socket to obtain the LAN IP address of the SPA-2102 and then access this address via the SPA's LAN.
    More details and/or also the SPA admin guide, and SPA-2100 admin suplement can be found for example here :
    http://www.sipura.net/support/ 
    Those are a bit old PDF manuals but it explains basic info about SPA-xxxx adapters, how to use the IVR, how to setup the adapter, what the different options mean etc ...  I think it's a usefull reading.

  • Trouble w/Linksys WRT54G2 connecting w/Linksys Phone Adapter SPA2102

    I am trying to connect my new VOIP phone adapter Linksys SPA2102 with my wireless router Linksys Cisco #WRT54G2 V1.  I have DSL and previously had the wireless router connected with a Vonage Phone Adapter and everything worked fine.  When trying to connect my new phone adapter Linksys(SPA2102) it does not work.  It will work if I connect the new adapter directly with my DSL modem but will not work through my wireless router (WRT54G2 v1).  I have turned everything off and restarted all products several times along with the PC and still no luck.  The only way I can get my DSL to work with the new adapter is to wire it directly to the DSL modem.  Everything worked yesterday prior to trying to use the new phone adapter.  I hope this makes sense lol.  This is not allowing me to use my laptop through the wireless router.  Any help would be greatly appreciated.  Thank you.
    Jenny

    you should try this -- it shows you how to configure wrt54g2 behind the SPA2102 because it is recommended that you put the SPA2102 directly behind modem for better voice quality

  • Delete existing profile in Linksys PAP2 phone adapter!!!

    Can any one please let me know how to delete the existing profile from the Linksys PAP2 phone adapter. It is not allowing to save the new profile. after updating the new profile, it will be there for couple mins then old profile is overriding the new one.
    Please help me with this.
    Thanks,

    check if there is something on the Profile Rule paramater under Provisioning tab other than the default /init.cfg then delete it...it is possible that device resyncs to that profile which then brings back the old settings...
    | isolate! isolate! isolate! |

  • Ordered skype voice phone adapter...nothing happen...

    I placed an order on November 14, 2012. The message in my email says that it would ship on November 26, 2012. The message also had a link to track my order. I am a patient sort of fellow. I waited six weeks and today I tried to see what happened to my order. I looked at the link in the message and it is now a broken link. I am beginning to think I am out $59.99 and have no idea how to get my product which I truly wanted or get my money back. I love skype phone service. It's been awesome for the last 4 years. I may have made a grave error in buying a product from the skype store though. There doesn't seem to be anyway to contact someone about my order.  Here is the message I receive below (minus my name and address). At this point, I would cancel the order but alas, there is no link and no phone number to effect a cancellation. Do I call the bank?
    hank you for your order from eBuyNow. We recommend you keep a record of your order number as you may need it for future reference.
    We have created an account for you with your email address as the username.  If you wish to get your password to login to your account, click on the link provided below and click 'forgot my password' and your auto generated password will be sent to your email address.  This will allow you to look at the status of your order at your convenience.
    To login to your account, please go to [invalid URL]
    Please go to [invalid URL] for further information or to send a question to our Customer Support Team.
    ==============================
    ==============================
    ORDER INFORMATION:
          Amount   Product
    ==============================================================
          $59.99   Skype Voice Phone Adapter + 3 Months of Skype C
          $59.99   Subtotal
           $0.00   Shipping & Handling
          $59.99   Grand Total
    You have purchased a back ordered item Skype Voice Phone Adapter + 3 Months of Skype Calling in US and Canada  TALK-1200-3MNA.This product will be available to ship on November 26, 2012.
    BILLING INFORMATION:
    my name and address
    Albuquerque,  New Mexico, 87111
    United States
    my phone
    SHIPPING INFORMATION:
    my name and address
    Albuquerque,  New Mexico, 87111
    United States
    my phone
    ============================================================
    General Information
    eBuyNow is operated by
    eBuyNow Ltd, 704 Stag Building, 148 Queen's Road Central, Hong Kong & eBuyNow Ltd, Third Floor, 207 Regent Street, London W1B 3HH, United Kingdom.
    [invalid URL] Through its websites, eBuyNow offers business and consumer electronics hardware,
    software and services.
    Tax and Duties
    eBuyNow operates across the world and we have
    agreements with the tax authorities of various countries to
    collect tax on their behalf. These taxes have been included
    in the price you pay and are itemized on your invoice.
    No further taxes will be charged.
    Delivery
    We do not charge for shipping - there are no extra costs.
    Goods will be sent to the address given by you in your order.
    Please note that if you are ordering more than one item,
    your goods may be sent to you in separate shipments. Approximate
    delivery periods globally are 7-10 working days.
    Cancelling Your Order
    You may cancel your order within 7 days of delivery for a
    full refund. You will have to return unwanted goods at your
    own cost unless we have not sent you exactly what you ordered.
    You will find full details at [invalid URL]
    Warranty
    eBuyNow supports the terms of manufacturer product
    warranties and will provide a replacement, or at our
    discretion, a refund, for defective products under warranty.
    You can get full details from [invalid URL].
    We will pay reasonable return charges for defective products.
    Applicable Law
    Your contract with eBuyNow is governed by the
    laws of England and Wales.
    ============================================================
    eBuyNow Ltd, 704 Stag Building, 148 Queen's Road Central, Hong Kong & eBuyNow Ltd, Third Floor, 207 Regent Street, London W1B 3HH, United Kingdom.
    PLEASE NOTE THAT THIS IS NOT A RETURNS ADDRESS. FOR ALL
    CUSTOMER SUPPORT QUERIES PLEASE GO TO
    [invalid URL]

    Hi, wmcneillabq, and welcome to the Community,
    Thank you for your letter and report, which I have also alerted eBuyNow to as well.  If you wish to cancel your order, best practice is to cancel your order with eBuyNow first:
    Please go to ebuynow.info/en/contact/lookup.php (add the http:// as this forum does not allow hyperlinks).
    If you wish to file with whatever payment method you used, then of course that avenue is yours to pursue as well.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Phone Adapter for cable internet

    I have recently switch to cable internet and phone service through Cableone.  I purchased a CM100 modem, but didn't realize that I also needed a phone adapter.  What do I need to by now to hook up my phone?  Just the PAP2 Phone Adapter or do I need to purchase a router as well?  Thanks for any replies...

    Either you can go for PAP2 or else you can VOIP router. WRTP54G.

  • Phone adapter PAP2T

    Hallo guys, I just bought the above phone adapter, but I can't configure it right. I gave it static ip, my router as gw, my voip provider as proxy (if I am not mistaken), user name and password of my voip provider. Still the light of the phone port remains off. What am I doin g wrong?

    First you need to configure the PAP2T with user id (which is phone number), password and proxy. This information can be found from your VOIP provider. After you finished applying the those information then you may follow this kb article 
    http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=5193&p_created=11686.... 

  • Connecting PSTN line to SPA112 2-Port Phone Adapter

    Hi,
    Not sure if this question is right but can I use the SPA112 2-Port Phone Adapter to connect a PSTN line?  What I want is, I should be able to choose a line and while making calls.  Use PSTN or VOIP.  
    Please let me know if I am using a wrong device for my purpose.
    Regards,
    Naidu

    No, it cannot, that device has FXS ports, no FXO ports
     Includes two standard telephone ports, each with an independent phone number, for use with fax machines or analog phone devices
    http://www.cisco.com/c/en/us/products/collateral/unified-communications/small-business-voice-gateways-ata/datasheet_C78-691106.html

  • PAP2T VOIP phone adapter not working

    My new Linksys PAP2T VOIP phone adapter will not work. When I install the adapter (I'm sure I have done this correctly), all I get is a slow blinking green power light and a fast blinking green internet light. I get no phone light, and I get no dial tone. Is my PAP2T defective? Or is something else going on? Can you recommend a fix?

    The "User Guide" which comes with your PAP2T and you can read or is downloadable from Linksys says the following about the "Power Lite"
    Green. The Power LED lights up when the Phone Adapter is powered on and connected to the Internet. It flashes when the Phone Adapter is not connected to the Internet. The LED also flashes when the Phone Adapter is booting up or upgrading its firmware.
    It says the following about the "Internet Lite"
    Green. The INTERNET LED lights up when there is an active connection through the port. If the LED is flashing, then there is traffic moving through that port.
    It says the following about the "Phone Lite"
    Green. The PHONE LED is solidly lit when a telephone or fax machine has an active or registered connection to your Internet phone service provider through the corresponding port. It flashes when the phone is being used or is off the hook.
    Using logic, I would say the adapter may not connected to the internet and if it is, the adapter failed to register with your voip provider.

  • BEFSR41 fed from SPA2102 VoIP Phone Adapter with Router

    urrently, a broadband cable modem is connected  to the input of a new BEFSR41 4-port router.  The router feeds 4  computers (a newer "primary" PC, and 3 secondary "old goats" that I use  to print online grocery coupons).  The 4 PC's are networked to share a  common printer, a single directory on the "primary" PC, and using a  4-port KVM switch - I switch a single keyboard and mouse to whichever PC  that I am using at the time. 
    I  want to purchase a Linksys SPA2102 VoIP Phone Adapter with Router and  integrate it into my existing system (noted above).  This is probably a  no-brainier for some, but I am new to routers and VoIP and that is why I  am posting here, before buying the SPA2102.
    According  to the SPA2102 instruction manual that I downloaded from the Cisco  website, there are two RJ45 connectors, one YELLOW and the other BLUE  with the following typical connection configurations:
    YELLOW  . . . Connect one end of an Ethernet network cable (included) to the  ETHERNET port of the Phone Adapter.  Connect the other end to the  Ethernet port of your PC.
    BLUE . . . Connect one end of a different  Ethernet network cable to the INTERNET port of the Phone Adapter.   Connect the other end to your cable/DSL modem.
    What  I would like to do is, hopefully, simple and effective.  I want to  connect my cable modem to the SPA2102's BLUE connector, and from its  YELLOW connector connect to the BEFSR41's input.  Will this work,  ensuring both the BEFSR41 and SPA2102 function properly?
    Thank you.
    CurlySue 

    if you have access to the device and it is not remotely provisioned by the VOIP company. try to change the registration expires to a 24 hour time period as well as well as the Resync Periodic: in the provisioning tab to 24 hours as well.

  • Is there any way to contact verizon with a detailed cell phone technical support question?

    Is there any way to contact Verizon with a detailed cell phone technical support question?  I prefer e-mail so as to provide details (like I am trying to provide here).  I have tried in-store personnel (no help at all) and the web chat - they just want to see me more data instead of helping me with my basic problem!
    I CAN NOT GET ANYONE FROM VERIZON TO GIVE ME ANY HELP NOR CAN I FIND A WAY TO FILE A COMPLAINT.  AT THIS POINT I JUST WANT TO DROP MY VERIZON ACCOUNT BUT I'M SURE THAT IT WILL COST ME A SMALL FORTUNE TO GET OUT OF IT.
    Here is my issue:
    Chat transcript removed as required by the Verizon Wireless Terms of Service
    BELOW IS A SCREEN COPY FROM REDDIT ABOUT SOMEONE WITH THE SAME PROBLEM WITH A VERIZON CELL PHONE
    So last night my RAZR MAXX HD did something totally bewildering by spontaneously downloading 2.6 GB of data over the course of ~ 3 hours. Fortunately I was able to catch this problem before it ended up being really expensive, but I still exceeded my 2 GB data plan by 600MB.
    The Culprits:
    Reddit News Free: 160 MB foreground / 0.96 GB background
    Android OS: 0 MB foreground / 1.18 GB background
    Several unnamed applications: ~ 350 MB
    Screenshots:
    The massive data spike
    Android OS data usage
    Reddit News Free data usage
    Weird unnamed processes
    Detailed timeline:
    5:12 PM: Incident begins according to VZW data usage website (2.60410 GB used). This is around the last time that I used my phone at the laundromat before getting dinner and watching Game of Thrones.
    8:04 PM: 50% of data allowance used (txt msg)
    8:31 PM: 75% of data allowance used (txt msg)
    8:58 PM: 90% of data allowance used (txt msg)
    9:13 PM: 100% of data allowance used (txt msg)
    10:05 PM: Got the text messages and immediately put the phone into airplane mode
    10:30 PM: Took screenshots
    10:45 PM: Enabled wifi, installed Kaspersky premium. Scan returned no threats.
    11:00 PM: Left phone in airplane mode, went to sleep.
    The questions:
    What was the root cause of this issue? Did Reddit News freak out as a result of an esoteric bug or was my phone hacked?
    If this was a simple Reddit News bug, then why was the Android OS also trying to use such a massive amount of background data?
    What the hell are these unnamed numeric applications? I've inspected my process history and this is the first time they have ever attempted to use data.
    I'm pretty sure that I can explain this situation to Verizon and get out of having to pay additional data usage fees, but I would like to know more about the problem before I get in touch with them.
    all 13 comments
    best 
    [–]omgmrjmako/PA, deb/Carbon 3 points 1 year ago*
    All I can think is your phone may have background downloaded an OTA update, and you'd then be prompted with something like, "As update to your Android system has been downloaded, would you like to install it now?"
    I do find it very odd that the update would be 2.6GB. As a rough base, the CyanogenMod 10.1 firmware for your device is well under 200MB, so unless Verizon has a ****-ton of bloatware in the update, or it had to attempt to download multiple times for some reason, it may be a stretch.
    But doing a little homework, it looks like the Verizon Razr Maxx was updated to 4.1 in late March. Maybe they're still rolling it out in waves? Have you gotten the update yet?
    Edit: Aaaand I just noticed you appear to be running an AOSP-based ROM, which totally rules out a carrier update being sent out.
    Edit2: If you want to live dangerously, you could try running:
    #kill -9 12289
    That 12289 is the PID listed in your screenshot. But don't run that without fulling understanding the kill command.
    The ps command could also be of use, but probably not.
    permalink
    [–]lechnito[S] 2 points 1 year ago
    I can confirm that the phone is currently at 4.1.2 and that I wasn't prompted for an OTA update.The fact that both the Android OS and Reddit News processes were simultaneously using an extremely large amount of data is unlikely to be a coincidence... 
    permalink
    parent
    [–]omgmrjmako/PA, deb/Carbon 3 points 1 year ago
    That is very curious that the spikes happened at the same time.I'm curious. It may have put at least some of that 2.6GB somewhere. You could use a data visualizer tool to see if you can find it, which may lead to more clues. 
    permalink
    parent
    [–]lechnito[S] 2 points 1 year ago
    The largest directories are:
    DCIM: Normal looking photos (90,825 KB)
    Android: Primarily map cache data (64,846 KB)
    If it was downloading content then it did not significantly save content to storage. It's not like I have anything particularly sensitive on the phone, but the idea that it was uploading a snapshot of my data definitely makes me uncomfortable.
    permalink
    parent
    [–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
    Yup, Digital Camera IMages and videos.Somewhere in /sdcard/Android would be my guess as to where a mysterious file would be downloaded, but if it's only 64MB, and mostly map data, I'd safely rule it out.I'm sorry, but I'm stumped here.Edit: I should mention I don't think this is malware, because unless a malicious app gained superuser access, any data it used would show under it's own apk in the data usage list, not Android OS. 
    permalink
    parent
    [–]mistrbrownstone 0 points 1 year ago
    DCIM: Normal looking photos (90,825 KB)
    Was it trying to auto-upload pictures or video to G+?I ******* hate that.
    permalink
    parent
    [–]lechnito[S] 1 point 1 year ago
    Although I'm not really up to speed with the Android platform, I come from a UNIX background so I feel comfortable running commands. How do I pull up a bash terminal? Do I need to root the phone first? 
    permalink
    parent
    [–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
    There's a number of terminal emulators in the Play Store that work well. You don't need a rooted phone to get to the shell as your user, but any privileged command won't execute unless you can grant it permission from the Superuser app that is installed when you root the device. So you could probably do a ps -e, but not a kill -9. 
    permalink
    parent
    [–]lechnito[S] 1 point 1 year ago
    Got it. I downloaded a terminal emulator but unfortunately those processes no longer exist.Does Android keep a generic log of system level events like /var/log/syslog? 
    permalink
    parent
    [–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
    I don't think so, and I know you'd need superuser permission to read most of the files in /var/log anyway. I'm not super familiar with how Android does its logging, but I do know that the two files of interest are the logcat and dmesg. 
    permalink
    parent
    [–]sh0nuff 1 point 1 year ago
    Want to mention here that using your settings to set your data cap (set it on your billing day), then you won't go over again.Those text messages are really unhelpful, as they send out well after the data has been used. Chances are good you hit close to the 2GB mark before you received the bulk of the messages. 
    permalink
    [–]kindofabuzz -4 points 1 year ago
    Quit installing pirated apps. 
    permalink
    [–]lechnito[S] 1 point 1 year ago
    That's definitely not the case here; both my PC and and Android phone are free from pirated apps.

    You used the data.  Verizon can not see what it was sued for.  However your phone can see whats apps used the data.  go to settings-data usage- there will be a place that says data usage cycle.  line the dates up with your cycle.  then there will be a bar graph below that   extend bother white bars one all the way to the left and one all the way to the right.  after those are extended below that will be a list of apps,  there should be one that used over 2 gb and that will show you what app used that data in her purse

  • USB Skype Phone Adapter - How to use it?

    Hello everyone,
    I would like to ask regarding USB Skype Phone Adapter, as I am planning to buy it. But, before I buy it I would like to know if I can still use skype to call locally using the land phone line (since it's by contract, and local calls are all free). Can I use the skype keypad to make those calls? Can I have access to my land phone line through skpye to make local calls, even though I might use it from a different country through skype? Please help me with issue. Thank you very much in advance! 
    phoenix

    First of all, you seem to be using some custom classes as there is no table and no SimpleTableModel in Java ME.
    That said,
    The simpleTableModel is already attached to the tableSo when you assign the variable reference tableModel1 to a new object, it is the earlier referred object that is still 'attached' to the table, not the newly constructed one.
    If you can head me to the right documentationThat would be available from wherever you got the classes.
    db

  • Port forwarding feature in Linksys VoIP adapter

    Hello,
    I tried to use the port forwarding feature (in the Application tab), but could not get successful. I need to telnet to a Cisco router behind my Linksys VoIP Adapter, uses starting port=23, ending port=23 and ip is the Cisco router ip.
    Let me know if I am missing anything. I tried the DMZ feature too, but still the same result.
    When I am trying from outside I get this:
    termserver>telnet 75.156.137.224
    Trying 75.156.137.224 ...
    %Connection refused by remote host
    If I configure the Cisco Router with NAT, I have no problem connecting from outside. I want the Linksys as the gateway, not the Cisco router. Any help would be highly appreciated.

    What is the model number of your Linksys router? Make sure that you have the latest firmware on the device. Also make sure that you forward TCP port 23 for the IP address of the Cisco router coming from the DHCP server of the Linksys router or if you have a static, it has to be on the same subnet as Local IP address of the Linksys router.

  • The FREETALK Connect•Me Home Phone Adapter for Sky...

    Hi all,
    I am seriously considering dropping my landline since I mostly if not only uses my iPhone as my primary device for calls. The problem I have is an alarm system is connected to my land line and requires a way to call the alarm centre in case of an emergency.
    I talk to my alarm service provider for an alternative. They already have the cellular option, but it adds $12/m which is not a big saving... They are working on finding an IP/Internet solution, but it will be also a $4/m.
    I was wondering if I could use the FREETALK Connect•Me Home Phone Adapter for Skype as a solution. From a computer I can call any 1-800 numbers for free, and I really suspect that the alarm centre is a toll free number too. So in theory it could work.
    Can anyone share their experience with the device and suggest if my solution can work or not?
    Thanks

    I use that adapter in my house, it works just as a normal landline would.  There is a slightly longer predial delay when initiating a call (approx 3 second Skype dialing noise), beyond that no real difference.  If the box doesn't lock up, or your Internet doesn't go down it should be rather reliable as a replacement.  Those are worst-case scenarios and I generally don't find myself having to do anything to maintain it.  In any case I have it connected to a power surge strip like I do the rest of my equipment.  Should I need to reset it, I just toggle the switch.

  • FREETALK Connect-Me phone adapter discontinued

    I noticed today that the FREETALK Connect-Me phone adapter has been discontinued. Is there a replacement solution? My device has been working great for several years and I use it all the time for connecting my home phones to skype.

    That's always a possibility.  However I'm not aware of it being discontinued by the manufacturer.  You can generally buy it from the Freetalk site (http://freetalk.me/). Occasionally I've seen it disappear from the site (like now) when they are out of stock, then reappear again.  It's also available on Amazon and Ebay.
    Some people have used the Soundwin SP110, but there have been a lot of stability/quality issues with that device.  http://www.soundwin.com/style/frame/templates3a/product_detail.asp?lang=2&customer_id=824&name_id=40...

Maybe you are looking for